Search

Purpose: For whole-breast irradiation after breast-conserving surgery, computed tomography simulation (CTS) and irradiation are generally performed during free breathing. In treatment planning, there are three techniques: field-in-field (FIF), physical wedge (PW), and enhanced dynamic wedge (EDW). The aim of this study was to investigate the impact of respiratory motion on doses for these three irradiation techniques., Methods: All doses were measured using an ionization chamber in a cylindrical phantom on a respiratory motion platform. Doses for each technique were measured with and without phantom motion. The dose without phantom motion was defined as the reference. The reference was compared to the dose with the phantom motion. The positions of the isocenter with respect to the ranges of phantom motion were set as exhale and intermediate. The phantom motion amplitude was set to 5 mm or 10 mm. The respiratory phase to initiate irradiation was varied as inhale, intermediate-inhale, exhale and intermediate-exhale., Results: When the motion amplitude was 10 mm, the dose differences for the FIF, PW, and EDW techniques were 4.2%, 0.5%, and 0.8%, respectively, at the maximum. However, the dose difference for the FIF technique was -0.5% when the isocenter position was set to the intermediate phase of phantom motion., Conclusion: We found that the dose difference per fraction was reduced when the respiratory phase during CTS image acquisition was set to the intermediate phase. Meanwhile, the dose differences per fraction for the PW and EDW techniques were less affected by the respiratory motion.

In radiotherapy planning, CT images are widely used to delineate the gross tumor volume (GTV) and the organs at risks (OARs), which allows for the calculation of the dose distribution to each structure. The delineated contours of the GTV and OARs may become inaccurate, and subsequently result in the inaccurate derivation of the dose distribution, if there are metal artifacts present in the CT image. The metal artifact reduction technique, single energy metal artifact reduction (SEMAR), installed on the CT system (Aquilion ONE TM Vision Edition, Toshiba Medical Systems Corporation) could potentially reduce metal artifacts. Therefore, we investigated whether SEMAR can improve the accuracy of delineation, and subsequently the dosimetric accuracy, in the treatment planning process. Using an acrylonitrile-butadiene-styrene resin phantom (RT-3000-New, R-Tech. Inc, Tokyo, Japan), titanium bars were inserted on both the left and right sides, and four types of electron density inserts (rods) were separately inserted in the middle. The electron densities of the rods were 0.90, 0.96, 1.07, and 1.09. After CT images were acquired, SEMAR-ON (when applying the SEMAR correction) images were generated. On both SEMAR-ON and SEMAR-OFF (when not applying the SEMAR correction) images, the rod contours were delineated automatically, using a CT value threshold. This threshold was selected so that the area of the automatically delineated contour was 615.4 mm 2 . The difference in the contour area of SEMAR-ON, SEMAR-OFF, and no metal artifact images were compared using the dice coefficient. When SEMAR was used, the dice coefficient improved by 57.4%. Therefore, SEMAR was considered to be useful in improving the accuracy of GTV and OAR delineation.

Twenty liver cancer patients, including 9 hepatocellular carcinoma and 11 with metastatic liver cancer, were treated by intra-arteral one-shot chemotherapy. Alterations in blood coagulation and fibrinolysis were observed serially after one-shot chemotherapy by testing the levels of PT, APTT, FDP, fibrinogen, AT III, alpha 2-macroglobulin, and plasminogen. APTT was prolonged, FDP increased, Fbg increased after a transicent decrease, and AT III, alpha 2-M, and plasminogen decreased. The peaks of these alterations occurred within 7 days after the one-shot treatment; recovery was observed after about weeks. The more advanced the cancer, the greater were the alterations.