Search

Universal high‐performance columns made of high‐strength steels without welding In recent years, steel‐concrete composite columns made of normal‐strength steels are seldom used owing to the economic and technological advantages of precast reinforced concrete columns. Though, the use of high‐strength structural steels bears high potential for the efficient production of composite columns with excellent structural performance that are economically competitive to precast concrete columns, there are currently major obstacles to use of the ultra‐high‐strength steels (UHSS) in Germany. Hollow section composite columns with embedded high strength steel core without welded connections provide an opportunity to regain lost market share. A research project, funded by the AiF (Arbeitsgemeinschaft industrieller Forschungsvereinigungen), is intended to explore the potential of UHSS composite columns by experimental and theoretical investigations. The present paper demonstrates the concept of such composite columns with UHSS and gives first exciting insights into the research results. In addition to column tests under ambient and fire conditions, small scale tests are necessary to investigate various influencing factors and to create the basis for new and easy to use design and construction principles that allow efficient application. [ABSTRACT FROM AUTHOR]

Owing to the new rules of the German National Annex to EN 1998‐1, the relevance of the seismic action has increased, materialising in extended seismic areas and higher spectral accelerations. This may lead to seismic loading being decisive on the design of steel and composite frames. However, the demand is lower in Germany than in other seismic areas. Consequently, these challenges are addressed in an ongoing German national research project, by developing joints with dissipative connections, classified as semi‐rigid and partial‐strength, for steel and composite frames that could allow for the use of behaviour factors in the range of 1.5 to 3. The development started with typical connections from the German catalogue, designed to withstand static loads in the elastic range, followed by performance and detailing improvements. Developments (e.g., increase in sagging/hogging bending: 125 %/18 % of steel joints and 70 %/40 % of partially composite joints) resulted from pre‐test finite element analyses (FEA) on joints and frame models. Improvements to joint detailing were made according to the provisions of the newest draft of Eurocode 8. The optimised joints were integrated in frame specimens, which are currently being tested under monotonic and cyclic loads at RWTH‐Aachen University. This article introduces the developed joint solutions, describes the experimental and numerical programs and presents the monotonic response of frame specimens based on the results of FEA, as well as the main conclusions. [ABSTRACT FROM AUTHOR]