Search

The evolution of the Alpine Tethys margins during the beginning of the African-Eurasian convergence was little studied compared to their evolution during the post-Pangea rifting and oceanic expansion, i.e., from the Early Jurassic to the early Late Cretaceous. The present work firstly aims to make up for this shortcoming in the case of the distal European margin of the Alpine Tethys, namely the Briançonnais domain of the Western Alps. We show that this margin was affected by strong post-rifting extension mainly in Late Cretaceous-Paleocene times and propose to make it the type of the (rare) “Late Extension Passive Margins”. Remarkably, this extension shortly preceded Lutetian times, when Briançonnais margin encroached the SE-dipping subduction zone under the Adria microplate. Secondly, we assess the post-rifting evolution of the north-Tethyan paleomargin in the Maghrebides transects, i.e., south-west of the Briançonnais transect along the same European-Iberian paleomargin. For this purpose, we consider the Triassic-Eocene series of the “Dorsale Calcaire” in the Alkapeca Blocks located along southeastern Iberia until the Eocene then transported onto the North African margin. Examination of the literature shows that the Tethyan margin of the Alboran block was strongly affected by normal faulting as early as Late Jurassic-Early Cretaceous times whereas post-rifting extension of the Kabylian blocks mainly occurred in the Late Cretaceous-Paleocene like in the Briançonnais. We propose that post-rifting extension of the Alboran block southern margin resulted from the sinistral movement of Africa relative to Iberia while the later extension of the Kabylian blocks can be related to the further convergence kinematics. Subduction of the Ligurian-Maghrebian slab under the North African margin would have occurred at that time in the southward continuation of the Alpine subduction. The overriding Adria and North African margins did not experience significant compression at that time. During the Eocene, a subduction polarity reversal occurred, which was associated with the relocation of the subduction zone along the Alkapeca block. This was the beginning of the Apenninic subduction, which triggered the back-arc opening of the Mediterranean basins.

Microstructural features control the petrophysical properties of rocks. Of these, pore size is particularly sensitive when non-wetting fluids saturate the reservoir. The pore networks and physical properties (helium, water and mercury saturation porosity, bulk density, nitrogen permeability, P-wave velocity and thermal conductivity) of different rock types from a productive Upper Cretaceous (Coniacian) reservoir in the tunisian offshore are measured on hydrocarbon-washed samples. The facies sampled of Douleb Member are wackestone, packstone and grainstone textures as well as dolostone, dolomitized packstone and anhydrite textures. Based mainly on the results obtained by mercury injection, the porous facies of the Coniacian Douleb Member are characterized by a complex pore system with a large morphological and pore size variability in the rock. Porosity values range from 0.3 to 23.6%, bulk densities vary from 2.05 to 2.92 g.cm−3. The permeability is variable from 3760 mD to values below 0.01 mD (measurement limit of the device). P-wave propagation velocity values range from 2060 to 6084 m.s−1 and thermal conductivity varies from 1.43 to 3.77 W.m−1.K−1. The oil-impregnated facies with the best petrophysical characteristics are mainly the rudist-rich limestones and dolomites of the first unit (U1) of the Douleb Member. The well-sorted grainstones with small rudist debris and peloids have the best reservoir qualities. Porosity is the first order characteristic that controls petrophysical properties. The variability of permeability values around this first-order relationship is attributed to variations in the size of the pore access thresholds and connectivity. The variability in velocities is due to the shape of the voids, while the variability in thermal conductivity measurements is due to the nature of the contacts between the grains.

Abstract Soft-sediment deformation (SSD) structures are widespread in the sedimentary record, and numerous triggering mechanisms can induce its development, including glaciation, earthquakes, overloading, ground-water fluctuations, and wave movement. The Late Cretaceous Uberaba Formation preserves SSD structures as small- and large-scale load casts and associated flame structures, pseudonodules, and convolute laminations observed in the contact of three well-defined intervals among fine- to coarse-grained lithic and conglomeratic sandstone with fine-grained arkose and mudstone beds. Based on the morphology of the SSD structures, sedimentary facies of the Uberaba Formation, and similarities with previous observations in the geological record and laboratory models, these features are assigned to liquefaction-fluidization processes as the major deformational mechanism triggered by seismic and aseismic agents. We propose that a deformation occurred just after the sedimentation triggered by seismic shock waves and overloading, induced by the sudden deposition of coarse-grained sandy debris on fine-grained sediments. Some of these structures can be classified as seismites, providing evidence of intraplate seismicity within the inner part of the South American Platform during the Late Cretaceous. This seismic activity is likely related to the uplift of the Alto Paranaíba High along reactivations of regional structures inherited from Proterozoic crustal discontinuities and coeval explosive magmatism of the Minas-Goiás Alkaline Province.

The Cenomanian to early Santonian interval is usually considered a time of postrifting tectonic quiescence around the northern margins of Iberia that preceded the onset of the Pyrenean convergence by crustal thrusting in the latest Santonian. However, plate kinematic models of the Mesozoic evolution of Iberia poorly constrain the Turonian-Santonian position of Iberia relative to Eurasia. This study reconstructs changes in the sedimentary facies and architecture of the Iberian carbonate platform throughout the Late Cretaceous and sheds new light on the geodynamic evolution of the Iberia-Eurasia relationship at that time. Sixteen outcrop sections were described and 24 sedimentary facies identified that define 5 depositional environments ranging from the deep marine basin to the continental setting. From these and previously published field data we reconstruct the evolution of the Pyrenean carbonate platform, on an east-west transect nearly 400 km long, on the basis of 11 short-term depositional sequences and 5 long-term hemicycles. In our interpretation, the Cenomanian and Turonian correspond to a postrift stage during which the European and Iberian margins, together with the deep basin between them, subside gently, as shown by accommodation rates varying from ∼15 to 30 m/My in the margins and ∼100 to 150 m/My in the basin. The Coniacian and early Santonian are characterized by a large-scale flexural response consisting of (1) uplift of the southern Iberian margin, with negative accommodation rates, karstified surfaces and paleosols, and (2) increasing subsidence rates in the basin and its edges (the northern Iberian margin and eastern Aquitaine platform), with accommodation rates several times greater than during the Turonian. We propose that far-field stress possibly related to the northeastward motion of Africa, and/or onset of shortening at the Iberia-Europe boundary in the central and eastern Pyrenees led to the incipient large-scale flexural deformation in the Pyrenean domain. The late Santonian and Campanian are an early orogenic stage marked by rapid subsidence throughout the Pyrenean domain, except at its western end. We evidence for the first time a pre-orogenic flexure at the Iberia-Europe plate boundary induced by regional plate reorganisation between Africa and Europe during the Coniacian and the early Santonian.

Many Cretaceous asymmetrical rhynchonellid brachiopods (Brachiopoda, Rhynchonellida) have long been considered as Rhynchonella difformis (Valenciennes in Lamarck, 1819). After a revision, Owen (1962) included the Cenomanian specimens from Europe in Cyclothyris M’Coy, 1844. Later, Manceñido et al. (2002) confirmed this decision and critically mentioned the name of another asymmetrical rhynchonellid genus from Spain, Owenirhynchia Calzada in Calzada and Pocovi, 1980. Specimens with an asymmetrical anterior margin (non particularly ecophenotypical), from the Late Coniacian and the Santonian of Les Corbières (Aude, France) and Basse-Provence (SE France) are here compared to specimens of the original Cenomanian species C. difformis. They are also compared to new material from the Northern Castilian Platform (Coniacian-Santonian, N Spain) and to Rhynchonella globata Arnaud, 1877 (Campanian, Les Charentes, Dordogne, SW France) and Rh. vesicularis Coquand, 1860 (Campanian, Charente, SW France). These observations document the great morphological diversity among all these species and lead us to erect a new species: Cyclothyris grimargina nov. sp. from the type material of Arnaud, and two new genera: Contortithyris nov. gen. including Contortithyris thermae nov. sp., Beaussetithyris nov. gen. including Beaussetithyris asymmetrica nov. sp. All of these brachiopods fundamentally present an asymmetrical state which origin is discussed.

In two companion papers, we report the detailed geological and mineralogical study of two emblematic serpentinized ultramafic bodies of the western North Pyrenean Zone (NPZ), the Urdach massif (this paper) and the Saraillé massif (paper 2). The peridotites have been exhumed to lower crustal levels during the Cretaceous rifting period in the future NPZ. They are associated with Mesozoic pre-rift metamorphic sediments and small units of thinned Paleozoic basement that were deformed during the mantle exhumation event. Based on detailed geological cross-sections and microprobe mineralogical analyses, we describe the lithology of the two major extensional fault zones that accommodated: (i) the progressive exhumation of the lherzolites along the Cretaceous basin axis; (ii) the lateral extraction of the continental crust beneath the rift shoulders and; (iii) the decoupling of the pre-rift cover along the Upper Triassic (Keuper) evaporites and clays, allowing its gliding and conservation in the basin center. These two fault zones are the (lower) crust-mantle detachment and the (upper) cover décollement located respectively at the crust-mantle boundary and at the base of the detached pre-rift cover. The Urdach peridotites were exposed to the seafloor during the Late Albian and underwent local pervasive carbonation and crystallization of calcite in a network of orthogonal veins (ophicalcites). The carbonated serpentinized peridotites were partly covered by debris-flows carrying fragments of both the ultramafics and Paleozoic crustal rocks now forming the polymictic Urdach breccia. The mantle rocks are involved in a Pyrenean overturned fold together with thin units of crustal mylonites. Continent-derived and mantle-derived fluids that circulated along the Urdach crust-mantle detachment led to the crystallization of abundant metasomatic rocks containing quartz, calcite, Cr-rich chlorites, Cr-rich white micas and pyrite. Two samples of metasomatized material from the crust-mantle detachment yielded in situ zircon U/Pb ages of 112.9 ± 1.6 Ma and 109.4 ± 1.2 Ma, thus confirming the Late Albian age of the metasomatic event. The cover décollement is a 30-m thick fault zone which also includes metasomatic rocks of greenschist facies, such as serpentine-calcite association and listvenites, indicating large-scale fluid-rock interactions implying both ultramafic and continental material. The lowermost pre-rift cover is generally missing along the cover décollement due to tectonic disruption during mantle exhumation and continental crust elision. Locally, metasomatized and strongly tectonized Triassic remnants are found as witnesses of the sole at the base of the detached pre-rift cover. We also report the discovery of a spherulitic alkaline lava flow emplaced over the exhumed mantle. These data collectively allow to propose a reconstruction of the architecture and fluid-rock interaction history of the distal domain of the upper Cretaceous northern Iberia margin now inverted in the NPZ.

In sediments of the Aguja Formation (Late Cretaceous: Campanian) at La Salada in northern part of the state of Coahuila, Mexico, numerous fossils of vertebrates have been discovered including Hadrosauridae. One hadrosaur vertebra provides evidence of predation probably by a giant alligator Deinosuchus riograndensis.

Parsimony analysis of endemicity was applied to analyze the distribution of enchodontoid fishes occurring strictly in the Cenomanian. The analysis was carried out using the computer program PAUP* 4.0b10, based on a data matrix built with 17 taxa and 12 areas. The rooting was made on an hypothetical all-zero outgroup. Applying the exact algorithm branch and bound, 47 trees were obtained with 26 steps, a consistency index of 0.73, and a retention index of 0.50. The topology found with a majority rule consensus was: [(Mexico) + (United States) + (Morocco + Italy) + (Lebanon + Israel) + (Italy-Slovenia) + (Brazil)] + (D.R. Congo) + (Sweden) + (Germany) + (England). The procedure delimited two areas of endemism in the Tethys Ocean. They are Morocco and southern Italy and Lebanon and Israel. The area of endemism formed by Morocco + Italy represents the North African region of the Tethys Ocean, and that formed by Lebanon + Israel is in the mid-Tethyan Ocean. Our results are in partial agreement with the patterns of geographical distribution of certain invertebrate biota.

Ankylosaurian dinosaur osteoderms have been discovered in the southeastern part of the State of Coahuila, Mexico, in the township of General Cepeda, in the locality known as El Palmar. The osteoderms were collected from rocks that had been correlated to the Cerro del Pueblo Formation (Late Cretaceous: Campanian) of the Difunta Group. The fossil material includes four dermal scutes and three associated fragments that at present cannot be identified. This is the first description of ostoederms and ankylosaurian material from Coahuila.