Search

The mechanism for the formation of C x″-type ions in which x ≤ n - 2, from protonated peptides containing n amino acids, produced under conditions of fast atom bombardment and collisional activation, was investigated. Comparison of the tandem mass spectra of the [M + H]+ ions of two model peptides (VGSE and AAA) with those of their corresponding [Md + D]+ ions, in which all exchangeable hydrogens are replaced with deuterium, revealed that in the case of VGSE the hydrogen atom from the hydroxyl group in the serine residue and/or from the amide group of the adjacent amino acid must be involved in the migration process which leads to the formation of C2″-type ions. The second peptide (AAA) shows the exclusive transfer of the amide hydrogen atom in the formation of the C1″ ion. The mechanism differs from an earlier reported reaction channel which appeared to be applicable to the formation of C [ABSTRACT FROM AUTHOR]

The article presents microbiological research into the changes in the redox state and composition of the Escherichia coli quinone pool during aerobic batch-culture growth. Ubiquinones are involved in Escherichia coli aerobic respiration. Menaquinones function as electron carriers in anaerobic respiration. Environment changes are accompanied by an increase in the demethylmenaquinone pool.

Green leaf volatiles (GLVs) are short-chain oxylipins that are emitted from plants in response to stress. Previous studies have shown that oral secretions (OS) of the tobacco hornworm Manduca sexta, introduced into plant wounds during feeding, catalyze the re-arrangement of GLVs from Z-3- to E-2-isomers. This change in the volatile signal however is bittersweet for the insect as it can be used by their natural enemies, as a prey location cue. Here we show that (3Z):(2E)-hexenal isomerase (Hi-1) in M. sexta's OS catalyzes the conversion of the GLV Z-3-hexenal to E-2-hexenal. Hi-1 mutants that were raised on a GLV-free diet showed developmental disorders, indicating that Hi-1 also metabolizes other substrates important for the insect's development. Phylogenetic analysis placed Hi-1 within the GMCβ-subfamily and showed that Hi-1 homologs from other lepidopterans could catalyze similar reactions. Our results indicate that Hi-1 not only modulates the plant's GLV-bouquet but also functions in insect development., (© 2023. The Author(s).)

Bacterial spores are ubiquitous in nature and can withstand both chemical and physical stresses. Spores can survive food preservation processes and upon outgrowth cause food spoilage as well as safety risks. The heterogeneous germination and outgrowth behavior of isogenic spore populations exacerbates this risk. A major unknown factor of spores is likely to be the inherently heterogeneous spore protein composition. The proteomics methods discussed here help in broadening the knowledge about spore structure and identification of putative target proteins from spores of different spore formers. Approaches to synchronize Bacillus subtilis spore formation, and to analyze spore proteins as well as the physiology of spore germination and outgrowth are also discussed. Live-imaging and fluorescence microscopy techniques discussed here allow analysis, at single cell level, of the 'germinosome', the process of spore germination itself, spore outgrowth and the spore intracellular pH dynamics. For the latter, a recently published improved pHluorin (IpHluorin) under control of the ptsG promoter is applicable. While the data obtained from such tools offers novel insight in the mechanisms of bacterial spore awakening, it may also be used to probe candidate antimicrobial compounds for inhibitory effects on spore germination and strengthen microbial risk assessment., (Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Bacterial spores are ubiquitous in nature. They are stress resistant entities that are a concern to microbiological food stability due to their environmental stress resistance. In addition germinating and outgrowing spores at undesired times and places pose a significant health burden. The challenge is amplified due to the heterogeneous germination and outgrowth behaviour of isogenic spore populations. We discuss the role of different 'omics' techniques, proteomics in particular, to study spore biology in detail. With examples, the use of label-based and label-free quantitative proteomics approaches in understanding the spore physiology is demonstrated. Also the need of genomics, single cell analyses and analysis of cellular physiology is discussed briefly. Certainly accurate comprehensive data obtained from omics methods and molecular physiology will underpin the development of robust molecular models of bacterial spore germination and outgrowth., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Two approaches were investigated to discriminate between bell peppers of different geographic origins. Firstly, δ(18)O fruit water and corresponding source water were analyzed and correlated to the regional GNIP (Global Network of Isotopes in Precipitation) values. The water and GNIP data showed good correlation with the pepper data, with constant isotope fractionation of about -4. Secondly, compound-specific stable hydrogen isotope data was used for classification. Using n-alkane fingerprinting data, both linear discriminant analysis (LDA) and a likelihood-based classification, using the kernel-density smoothed data, were developed to discriminate between peppers from different origins. Both methods were evaluated using the δ(2)H values and n-alkanes relative composition as variables. Misclassification rates were calculated using a Monte-Carlo 5-fold cross-validation procedure. Comparable overall classification performance was achieved, however, the two methods showed sensitivity to different samples. The combined values of δ(2)H IRMS, and complimentary information regarding the relative abundance of four main alkanes in bell pepper fruit water, has proven effective for geographic origin discrimination. Evaluation of the rarity of observing particular ranges for these characteristics could be used to make quantitative assertions regarding geographic origin of bell peppers and, therefore, have a role in verifying compliance with labeling of geographical origin., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Bacterial spore formers are prime organisms of concern in the food industry. Spores from the genus Bacillus are extremely stress resistant, most notably exemplified by high thermotolerance. This sometimes allows surviving spores to germinate and grow out to vegetative cells causing food spoilage and possible intoxication. Similar issues though more pending toward spore toxigenicity are observed for the anaerobic Clostridia. The paper indicates the nature of stress resistance and highlights contemporary molecular approaches to analyze the mechanistic basis of it in Bacilli. A molecular comparison between a laboratory strain and a food borne isolate, very similar at the genomic level to the laboratory strain but generating extremely heat resistant spores, is discussed. The approaches cover genome-wide genotyping, proteomics and genome-wide expression analyses studies. The analyses aim at gathering sufficient molecular information to be able to put together an initial framework for dynamic modelling of spore germination and outgrowth behaviour. Such emerging models should be developed both at the population and at the single spore level. Tools and challenges in achieving the latter are succinctly discussed., (Copyright © 2010 Elsevier Ltd. All rights reserved.)

The cell wall of the human-pathogenic fungus Candida albicans is a robust but also dynamic structure which mediates adaptation to changing environmental conditions during infection. Sap9 and Sap10 are cell surface-associated proteases which function in C. albicans cell wall integrity and interaction with human epithelial cells and neutrophils. In this study, we have analyzed the enzymatic properties of Sap9 and Sap10 and investigated whether these proteases cleave proteins on the fungal cell surface. We show that Sap9 and Sap10, in contrast to other aspartic proteases, exhibit a near-neutral pH optimum of proteolytic activity and prefer the processing of peptides containing basic or dibasic residues. However, both proteases also cleaved at nonbasic sites, and not all tested peptides with dibasic residues were processed. By digesting isolated cell walls with Sap9 or Sap10, we identified the covalently linked cell wall proteins (CWPs) Cht2, Ywp1, Als2, Rhd3, Rbt5, Ecm33, and Pga4 as in vitro protease substrates. Proteolytic cleavage of the chitinase Cht2 and the glucan-cross-linking protein Pir1 by Sap9 was verified using hemagglutinin (HA) epitope-tagged versions of both proteins. Deletion of the SAP9 and SAP10 genes resulted in a reduction of cell-associated chitinase activity similar to that upon deletion of CHT2, suggesting a direct influence of Sap9 and Sap10 on Cht2 function. In contrast, cell surface changes elicited by SAP9 and SAP10 deletion had no major impact on the phagocytosis and killing of C. albicans by human macrophages. We propose that Sap9 and Sap10 influence distinct cell wall functions by proteolytic cleavage of covalently linked cell wall proteins.

The fungal cell wall is essential in maintaining cellular integrity and plays key roles in the interplay between fungal pathogens and their hosts. The PGA59 and PGA62 genes encode two short and related glycosylphosphatidylinositol-anchored cell wall proteins and their expression has been previously shown to be strongly upregulated when the human pathogen Candida albicans grows as biofilms. Using GFP fusion proteins, we have shown that Pga59 and Pga62 are cell-wall-located, N- and O-glycosylated proteins. The characterization of C. albicans pga59Delta/pga59Delta, pga62Delta/pga62Delta and pga59Delta/pga59Delta pga62Delta/pga62Delta mutants suggested a minor role of these two proteins in hyphal morphogenesis and that they are not critical to biofilm formation. Importantly, the sensitivity to different cell-wall-perturbing agents was altered in these mutants. In particular, simultaneous inactivation of PGA59 and PGA62 resulted in high sensitivity to Calcofluor white, Congo red and nikkomicin Z and in resistance to caspofungin. Furthermore, cell wall composition and observation by transmission electron microscopy indicated an altered cell wall structure in the mutant strains. Collectively, these data suggest that the cell wall proteins Pga59 and Pga62 contribute to cell wall stability and structure.

The dicumyl-peroxide-initiated addition and combination reactions of mixtures of alkanes (n-octane, n-decane) and alkenes [5,6-dihydrodicyclopentadiene (DCPDH), 5-ethylidene-2-norbornane (ENBH) and 5-vinylidene-2-norbornane (VNBH)] were studied to mimic the peroxide cross-linking reactions of terpolymerised ethylene, propylene and a diene monomer (EPDM). The reaction products of the mixtures were separated by both gas chromatography (GC) and comprehensive two-dimensional gas chromatography (GCxGC). The separated compounds were identified from their mass spectra and their GC and GCxGC elution pattern. Quantification of the various alkyl/alkyl, alkyl/allyl and allyl/allyl combination products shows that allylic-radicals comprise approximately 60% of the substrate radicals formed. The total concentration of the products formed by combination is found to be independent of the concentration and the type of alkene. The total concentration of the products formed by addition to the alkene increases with increasing concentration of alkene. In addition, the total concentration of the formed addition products depends strongly on the type of the alkene used, viz. VNBH>ENBH approximately DCPDH, which is a consequence of differences in steric hindrance of the unsaturation. The peroxide curing efficiency, defined as the number of moles of cross-linked products formed per mol of peroxide, is 173% using 9% (w/w) 5-vinylidene-2-norbornane (VNBH). This indicates that the addition reaction is recurrent. All these findings are consistent with experimental studies on peroxide curing of EPDM rubber. In addition, the present results provide more-detailed structural information, increasing the understanding of the mechanism of peroxide curing of EPDM. The described approach to use low-molecular-weight model compounds followed by GC-mass spectrometry (MS) and GCxGC-MS analysis is proven to be a very powerful tool to study the cross-linking of EPDM.

UV-cured networks prepared from mixtures of di-functional (polyethylene-glycol di-acrylate) and mono-functional (2-ethylhexyl acrylate) acrylates were analysed after hydrolysis, by aqueous size-exclusion chromatography coupled to on-line reversed-phase liquid-chromatography. The mean network density and the fraction of dangling chain ends of these networks were varied by changing the concentration of mono-functional acrylate. The amount and the molar-mass distribution of the polyethylene-glycol chains between cross-links (M(XL)) and polyacrylic acid (PAA) backbone chains (the so-called kinetic chain length (kcl)) in the different acrylate networks were determined quantitatively. The molar-mass distribution of kcl revealed an almost linear dependence on the concentration of mono-functional acrylate. Analysis of the starting materials showed a significant concentration of mono-functional polyethylene-glycol acrylate. In combination with the analysis of the extractables of the UV-cured networks (polymers not attached to the network, impurities that originate from the photo-initiator and unreacted monomers), more insight in the total network structure was obtained. It was shown that the UV-cured networks contain only small fractions of residual compounds. With these results, the chemical network structure for the different UV-cured acrylate polymers was expressed in network parameters such as the number of PAA units which are cross-linked, the degree of cross-linking, and the network density, which is the molar concentration of effective network chains between cross-links per volume of the polymers. The mean molar mass of chains between chemical network junctions (M(C)) was calculated and compared with results obtained from solid-state NMR and DMA. The mean molar mass of chains between network junctions as determined by these methods was similar.

Covalently linked cell wall proteins (CWPs) of the dimorphic fungus Candida albicans are implicated in virulence. We have carried out a comprehensive proteomic analysis of the covalently linked CWPs in exponential-phase yeast cells. Proteins were liberated from sodium dodecyl sulfate (SDS)-extracted cell walls and analyzed using immunological and advanced protein sequencing (liquid chromatography-tandem mass spectrometry [LC/MS/MS]) methods. HF-pyridine and NaOH were used to chemically release glycosylphosphatidylinositol-dependent proteins (GPI proteins) and mild alkali-sensitive proteins, respectively. In addition, to release both classes of CWPs simultaneously, cell walls were digested enzymatically with a recombinant beta-1,3-glucanase. Using LC/MS/MS, we identified 14 proteins, of which only 1 protein, Cht2p, has been previously identified in cell wall extracts by using protein sequencing methods. The 14 identified CWPs include 12 GPI proteins and 2 mild alkali-sensitive proteins. Nonsecretory proteins were absent in our cell wall preparations. The proteins identified included several functional categories: (i) five CWPs are predicted carbohydrate-active enzymes (Cht2p, Crh11p, Pga4p, Phr1p, and Scw1p); (ii) Als1p and Als4p are believed to be adhesion proteins. In addition, Pga24p shows similarity to the flocculins of baker's yeast. (iii) Sod4p/Pga2p is a putative superoxide dismutase and is possibly involved in counteracting host defense reactions. The precise roles of the other CWPs (Ecm33.3p, Pir1p, Pga29p, Rbt5p, and Ssr1p) are unknown. These results indicate that a substantial number of the covalently linked CWPs of C. albicans are actively involved in cell wall remodeling and expansion and in host-pathogen interactions.

Hyperbranched polyesteramides (DA2), prepared from hexahydrophthalic anhydride (D) and diisopropanolamine (A) have been characterized, by use of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS), field desorption (FD)-MS, and electrospray ionization (ESI)-MS. MALDI of polyesteramides produces protonated molecules. The spectra show a complex chemical composition distribution and end-group distribution which are mainly composed of two series of homologous oligomers DnA(n)+1 - mH2O and DnA(n) - mH2O, where m = 1-2. Signals from protonated molecules DnAn+1 and DnAn are almost absent in the MALDI spectrum, whereas these ions are responsible for the base peak of DnA(n)+1 - mH2O and DnA(n) - mH2O (m = 1-2) clusters in the ESI spectrum. The absence of -OH end-groups signals in the MALDI spectrum is due to a metastable decay of protonated DnA(n)+1 and DnAn ions in the ion source of the MALDI mass spectrometer prior to ion extraction. In-source decay results in the formation of protonated lower DnA(n)+1 - mH2O and DnA(n) - mH2O oligomers and their corresponding neutrals, leading to wrong conclusions concerning the relative end-group distribution as a function of the degree of polymerization and the chemical composition.

Matrix-assisted laser desorption/ionization (MALDI) was performed on an external ion source Fourier transform ion cyclotron resonance mass spectrometer (FTICR-MS) to analyze the block length distributions of triblock polymers of poly(oxypropylene) and poly(oxyethylene). The first series of results presented demonstrate that the apparent molecular weight distributions are distorted. This distortion is induced by the flight-time-induced mass discrimination inherent in the experimental technique, the variation of isotopic patterns over the measured mass range, and the overlap of peaks in the spectrum. Subsequently, a method for the treatment of molecular weight distributions measured by MALDI on an external ion source FTICR-MS is developed to yield the actual molecular weight distribution and, from that, the individual block length distributions. For the first time, detailed and accurate molecular weight data were obtained on a complex sample using this methodology, which independently validates the data provided by the manufacturer. The experimentally verified random coupling hypothesis proves the validity of the methodology.

Nodulation (root nodule formation) in legume roots is initiated by the induction of cell divisions and formation of root nodule primordia in the plant root cortex, usually in front of the protoxylem ridges of the central root cylinder. We isolated a factor from the central cylinder (stele) of pea roots which enhances hormone-induced cell proliferation in root cortex explants at positions similar to those of nodule primordia. The factor was identified as uridine. Uridine may act as a morphogen in plant roots at picomolar concentrations.

Natural mixtures of sophorolipids produced by the yeast Candida bombicola have been analyzed by fast atom bombardment (FAB)-MS and collision-induced dissociation (CID)-MS. Some pure components have been analysed by two-dimensional NMR spectroscopy. The presence of acidic, lactonic, and O-acetylated forms and the position of double bonds in the fatty acid part of these glycolipids can be easily inferred from positive and negative ion FAB-mass spectra. Details about position of O-acetylation can be obtained from CID mass spectra of [M+H]+ and [M-H]- ions and from the NMR spectra. Differences in CID fragmentation between protonated and sodiated molecular ions are discussed in detail. Enzymatic hydrolysis of 6',6"-di-O-acetyl sophorolipid lactone by cutinase from Fusarium solani results specifically in the removal of the 6'-O-acetyl group, whereas the 6"-O-acetyl and lactone group are resistant. This specificity is explained from a three-dimensional model of the sophorolipid generated on the basis of the short 1H,1H distances as inferred from the NMR (ROESY) spectra.

Fourier-transform ion cyclotron resonance mass spectrometry (FTICR-MS) by external injection of matrix-assisted laser desorbed and ionized (MALDI) polymers offers good possibilities for characterization of low molecular weight homopolymers (MW range up to 10 kDa). The molecular masses of the molecular weight distribution (MWD) components of underivatized and derivatized (dimethyl, dipropyl, dibutyl and diacetyl) polyethylene glycol (PEG) 1000 and 4000 were measured by MALDI-FTICR-MS. These measurements have been performed using a commercial FTICR spectrometer with a home-built external ion source. MALDI of the samples with a 2,5-dihydroxybenzoic acid matrix in a 1000:1 matrix-to-analyte molar ratio produces sodiated molecules in a sufficient yield to trap the ions in the ICR cell. The masses of the molecular weight distribution of PEG components were measured in broad-band mode with a mass accuracy of < 5 ppm in the mass range around 1000 u and within 40 ppm accuracy around 4000 u. From these measurements, the endgroup mass of the polymer was determined by correlation of the measured component mass with the degree of polymerization. The masses of the PEG endgroups have been determined within a deviation of 3-10 millimass units for the PEG1000 derivatives and 10-100 millimass units for the PEG4000 derivatives, thus confirming the identity of the distal parts of the model compounds.

Several rhamnolipid preparations from Pseudomonas strains were studied by thin-layer chromatography/fast atom bombardment (TLC/FAB) mass spectrometry and TLC/FAB tandem mass spectrometry (MS/MS). The preparations were separated with normal-phase (Silica 60) and reversed-phase (RP-8) chromatography. Silica 60 plates appeared to be very useful in the separation of rhamnolipids according to the number of monosaccharide residues present. Spectra which show characteristic fragment ions could be obtained from components of mixtures with a total sample size of less than 200 ng. Chromatography on RP-8 plates gave a good separation of the rhamnolipids based on the length of the fatty acid alkyl chain. MS/MS of the sodium cationized molecules gave information about the sequence of the building blocks. Particularly, heterogeneity in beta-hydroxy fatty acid composition was determined for the principal as well as minor components present in natural rhamnolipid mixtures.

Amino acid sequencing of a subtilisin-type bacterial protease and a bio-engineered variant was carried out by investigating various enzymatic digests using HPLC-frit fast atom bombardment MS methods. The fast atom bombardment mass spectral data allowed rapid identification of the enzymatically generated peptides and differentiation between both proteins. The feasibility of determining the positions and nature of mutations in the amino acid sequence depends mainly on the size of the peptides containing the modifications.