194 results on '"cost price"'
Search Results
2. Corn: Sowing Parameters
- Author
-
Oleh A. Kovalenko, Antonina V. Drobitko, Vitalii D. Palamarchuk, and Uliana P. Bahliuk
- Subjects
corn ,hybrid ,seeds ,weight of 1000 seeds ,depth of wrapping ,height of plants ,productivity ,conditional net profit ,cost price ,level of profitability ,Chemistry ,QD1-999 - Abstract
Aim. To highlight the results of the research conducted in 2020 – 2021 aiming at studying the ffect of multi-depth and multifraction sowing of the hybrid corn seeds of the DMS Sticker mid-early maturity group on the yield when grown in the conditions of the Northern Steppe of Ukraine and determine the economic efficiency of the approaches. Materials and methods. Winter wheat was a predecessor crop in the study. Tillage methods and related conditions are described in the article. Herbicides were used to protect against weeds. Sowing was carried out in the third decade of April at a soil temperature of +8 – 10 ºС. The experiment considered 2 factors, namely the depth of sowing seeds and the size of the seed fraction. The results obtained were processed using measurement, mathematical and statistical methods of research, as well as calculation and comparison approaches. Results and discussion. On average, depending on the factors studied, the height of the plants varied significantly, as a rule, the tallest plants were obtained from large seeds, which had the highest mass of 1000 seeds. Thus, in particular, on average over two years of research, the height of the plants was 250.4 cm when the weight of 1000 seeds was 255 g, and the seeds were wrapped by 4 – 5 cm; when the weight of 1000 seeds was 300 g, the height was 251.1 cm, while with the weight of 350 g it was 258.3 cm; with the wrapping depth of 7 – 8 cm the height was 252.1 cm, 255.8 and 268.5 cm, and with the wrapping depth of 10 – 11 cm it was 257.6 cm, 261.8 and 266.1 cm. Conclusions. The use of the large seed fraction provided an increase in the yield of the DMS Sticker corn hybrid by 1.09 – 1.79 t/ha compared to the use of the small seed fraction and was 8.70 t/ha. When using the large seed fraction and the wrapping depth of 10 – 11 cm, the cost of production was 56,550 UAH/ha. The cost price of 1 ton of production was the lowest and amounted to UAH 2,247.1, the conditional net profit was the highest – 37,000 UAH/ha, and the level of profitability was 189.3 %.
- Published
- 2022
- Full Text
- View/download PDF
3. Trends of the development of the meat processing industry of Ukraine and practical approaches to the optimization the recipe of sausage products
- Author
-
L. Bal-Prylypko, M. Nikolaenko, O. Cherednichenko, and L. Stepasyuk
- Subjects
production ,consumption ,quality ,cost price ,efficiency ,level of profitability ,Economics as a science ,HB71-74 ,Economic growth, development, planning ,HD72-88 ,Management. Industrial management ,HD28-70 - Abstract
Today, Ukraine is forced to perform a complex geopolitical task in order to guarantee not only military, but also food security. Therefore, the issue of increasing the efficiency of the meat processing industry, as one of the components of this task, is significant and relevant. The purpose of the article is to substantiate the economic aspects of increasing the efficiency of the functioning of meat processing enterprises of Ukraine as a result of improving the recipe of sausage products in order to reduce their cost price. The research was conducted using general scientific methods and techniques: logical and qualitative analysis and synthesis, monographic method, system-structural analysis method, cause-and-effect analysis method, experimental method, economic-statistical method, calculation-constructive method and method of logical generalization. The results of the research in the form of practical recommendations for reducing the cost of sausage products as a result of changing the cost norms and improving the product formulation can increase the economic efficiency of meat production. In order to reduce the cost of meat products, the recipe of products has been changed due to the rejection of expensive ingredients. The scientific novelty of the research results lies in the development of practical approaches to the study and analysis of dynamic processes in the meat processing industry based on the policy of stimulating demand for competitive products both in the Ukrainian and foreign markets. The article highlights the problems of the current state of the meat industry in Ukraine, the prerequisites and the main causes of this situation. The article deepens practical approaches to improving the recipe of sausage products, evaluates their updated recipe in order to reduce the cost of production and increase its efficiency, which lays the foundation for future research for other types of products
- Published
- 2022
- Full Text
- View/download PDF
4. Opportunities for the Application of a Model of Cost Management and Reduction of Risks in Financial and Economic Activity Based on the OLAP Technology: The Case of the Agro-Industrial Sector of Russia.
- Author
-
Khoruzhy, Liudmila I., Katkov, Yuriy N., Katkova, Ekaterina A., Khoruzhy, Valeriy I., and Dzhikiya, Meri K.
- Subjects
OLAP technology ,FINANCIAL risk management ,COST control ,ECONOMIC activity ,WAREHOUSE automation - Abstract
The development of cloud technologies enables companies to actively implement technologies for cost management and risk reduction in their financial and economic activities. The use of cloud-based models of risk management in the financial and economic activities of the enterprise will help small and medium-sized companies in the agro-industrial sector in Russia to make structural and strategic changes, as well as discover new opportunities for business expansion. The purpose of the study is to develop models for cost management and reduction of risks in the financial and economic activities of companies based on the OLAP technology for application in Russian agro-industrial enterprises. The study employs a qualitative approach based on the case study methodology. The paper discloses and substantiates the authors' conceptual model of a cost management system that allows executives to make decisions proceeding from four types of cost prices. The distinguishing feature of the management system is the use of a digital twin, which makes it possible to manage risks at the early stages of decision-making. The application of OLAP systems improves the quality of analysis and visualization methods as part of the cost management system. In addition, the study provides practical insight into how the applied model will help small and medium-sized agro-industrial enterprises to develop different business vision strategies based on cost reduction, manage the level of risk at the early stages of decision-making, and analyze information from a geographically dispersed logistics chain of divisions (production facilities, warehouses, stores). [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
5. METHODOLOGY FOR CALCULATING THE COST PRICE OF THE BENDING PROCESS FOR THE NEEDS OF MANUFACTURING LOGISTICS.
- Author
-
Janovska, Kamila, Vilamova, Sarka, Labounek, Dalibor, Kozel, Roman, and Pala, Tomas
- Subjects
BREAK-even analysis ,BENDING machines ,STAINLESS steel sheets ,SHEET metal ,WEB-based user interfaces - Abstract
The research of this paper aims to characterize and describe the methodological sequence of operations necessary for the correct calculation of the cost price when performing a bid calculation in the bending process step on a bending machine. The research focuses on determining the methodology and its application exclusively to sheet metal parts in the engineering industry in the processing of steel and stainless-steel sheets. To research this issue, we used empirical and quantitative research in a real work environment. The methodology for calculating the cost price of bending sheet metal parts yields the relationships between component inputs, the result of which is a time parameter that is expressed by the actual production costs. The results can be used in the real working environment of manufacturing companies for comparison with already established practices and a verification of their outputs. At the same time, it is possible to use the determined methodological procedure as a basis for implementation in the Aurendi web application. [ABSTRACT FROM AUTHOR]
- Published
- 2022
- Full Text
- View/download PDF
6. Imperatives of Efficient Use of Land and Resource Potential of the Agricultural Enterprises of Ukraine
- Author
-
Igor Vinichenko, Serhii Tkachenko, Oleksandr Sereda, Yurii Prus, and Nataliia Pochernina
- Subjects
land and resource potential ,land relations ,rent ,yield ,costs ,cost price ,income ,profitability ,Agriculture - Abstract
The article considers the institutionalization of land relations and the imperatives of efficient use of land and resource potential of agricultural enterprises of Ukraine. Within the institutionalization of land relations, the methodical approach to complex estimation of effective use of land and resource potential of agricultural enterprises is substantiated, by definition of an integral indicator of efficiency (quantitative and qualitative characteristics of involved resources, productivity and efficiency) of basic kinds of activity of economic entities on agricultural lands. Indicators of transparency in the assessment of land and resource potential and indicators of land policy according to the level of their use in agriculture are proposed. Comprehensive criteria for assessing the components of the efficiency of the use of land and resource potential of agricultural enterprises are presented. The amount of rent for land shares and the amount of fertilizer application per 1 ha of sown area of agricultural enterprises of Ukraine are analyzed. The productive capacity of natural and potential yields for grain and legumes (excluding corn for grain) in Ukraine has been determined. The normative monetary value of 1 ha of arable land in rural areas is calculated on average for one region of Ukraine, adjusted for the natural yield of cereals and legumes, without taking into account the application of fertilizers. The forecast level of technical, social and economic efficiency of the use of land and resource potential of agricultural enterprises is presented
- Published
- 2021
- Full Text
- View/download PDF
7. Managing the Potential of Agro-Industrial Enterprises in the Consumer Market
- Author
-
Igor Vinichenko, Serhii Tkachenko, Larysa Kurbatska, Dmytro Volovyk, Olena Shevchuk, and Nonna Surzhenko
- Subjects
land and resource potential ,land relations ,rent ,yield ,cost price ,income ,profitability ,Agriculture - Abstract
The article implements aspects of managing the potential of agro-industrial enterprises in the consumer market. A comprehensive methodological approach to diagnosing the model of assessing the management of the potential of agro-industrial enterprises is proposed, which on the basis of the mathematical apparatus of fuzzy theories allows to optimize its level in the chain of aggregate components, reduce the pressure of factors to limit the competitive position of businesses in the consumer market. It is proved that economic diagnostics allows to reveal causal relations in managerial dysfunctions and to pass to the model of sustainable development of the enterprise and effective use of its potential. A group (integrated) system of economic system diagnostics is proposed, which combines the properties of traditional “rigid” models and algorithms that assess the state of management of agro-industrial enterprises and the reasons for their dysfunction in many uncontrolled flows of resources, with the probability of failure. It is substantiated that the main component in managing the potential of the enterprise is the availability of potential resources, the totality and interaction of which opens up promising opportunities to achieve management goals. The directions of estimating the value of the potential of the agro-industrial enterprise are determined. An expert assessment of the integrated factor coefficient of economic stability of the potential of agricultural holdings of the meat-processing unit of Ukraine has been carried out. The graph-analytical levels of type manifestations of the potential and the profile of its components at the enterprises of agro-industrial production of meat processing unit are determined. Standardized coefficients for rating of agricultural holdings of the meat-processing unit of Ukraine according to their potential have been calculated. The forecast level of indicators and the integrated coefficient of effective management of the potential of agro-industrial enterprises are established
- Published
- 2021
- Full Text
- View/download PDF
8. Economic and energy efficiency of growing different varieties of red clover (Trifolium pratense L.) for fodder
- Author
-
H. Demidas
- Subjects
bioenergy factor ,cost and energy inputs ,economic and energy efficiency ,cost recovery ,profitability ,cost price ,net profit ,Plant culture ,SB1-1110 - Abstract
The cultivation of red clover for fodder purposes on typical low-humus chernozems of the northern part of the Right-Bank Forest-Steppe of Ukraine is profitable. Regardless of the technology components, it provides a net profit of UAH 14,962-23,743 per hectare with a profitability of 88-259% and a cost of 1 ton of feed units of UAH 1,415-2,662 and raw protein of UAH 5,363-10,265, a payback of energy costs in terms of gross energy (EER) yield per hectare of 6.2-9.0 and metabolisable energy (BER) yield per hectare of 3.2-4.6, with energy costs per 1 ton of feed units of 2.86-4.20 GJ. The purpose of the study was to determine changes in the economic and energy efficiency of growing different varieties of red clover for fodder purposes depending on the methods of sowing, seed inoculation with nodule bacteria and fertilisation. During the research, the following methods were used: field and laboratory – for conducting research in the field and laboratory conditions, analytical – to determine the chemical composition of dry biomass of red clover, calculation - to determine the indicators of economic and energy efficiency. The best rates of economic and energy efficiency of red clover cultivation are provided by the variety Typhoon when seeds are inoculated with nodule bacteria on fertiliser-free soil. The additional application of P60K90 or N60R60K90 against the background of inoculation, which is necessary to preserve soil fertility, worsens them, reducing net profit by 3,486-5,943 UAH/ha
- Published
- 2021
- Full Text
- View/download PDF
9. Agroeconomic Assessment of Utilization Biologics in the Cultivation of Spring Barley in the Conditions of the Southern Steppe of Ukraine
- Author
-
В. В. Гамаюнова, Т. О. Касаткіна, and Т. В. Бакланова
- Subjects
spring barley ,variety ,plant feeding option ,level of profitability ,notionally net profit ,cost price ,Agriculture - Abstract
The results of research conducted in 2016‒2018 on the southern chernozem andthe effect of two varieties of spring barley extra-root feed on the formation of grain productivityare given. Based on the results obtained, indicators of agroeconomic efficiency and their changewere determined under the influence of this event (as one of the most important elements of technology)in growing the crop, including in terms of varieties. Despite the increase in productioncosts, the treatment of plant seeding with biologics contributed to a certain increase in notional netprofit, which increased with the number of feeds, reaching the highest values if used to optimizethe nutrition of Fresh florid (300 g/ha). One feeding of Stalker variety is determined at the levelof 5927, two feeding ‒ 6890, three ‒ 7320 UAH, and 3857 UAH/ha ‒ in control. The mentionedindicators were 5968, 6808, 7771 and 3980 UAH/ha, respectively, when the spring barley varietyVakula was grown. One of the most important indicators of economic efficiency decreased‒ the cost of growing a unit of production with an increase in the number of extracurricular feeding.The lowest indicator was the cost price of production of top – dressing with Fresh florid(300 g/ha ‒ according to the Stalker variety): with one extracorporeal sowing ‒ 2269.4; two treatments‒ 2173.5, and three ‒ 2166.7 UAH/t; in control, this indicator was 2638.5 UAH/t. Thesevalues were, respectively, 2262.3; 2185,8; 2105.4 and 2608.0 UAH/t when the barley spring varietyVakula was growing. The use of other biological preparations led to a certain increase in thecost of growing spring barley. The highest values were recorded when using Organic D-2 M withonly one feeding in the plant phase. In this version of the experiment the cost of growing a unitof production even slightly exceeded control, when Vakula variety was grown. The cultivation ofspring barley on the basis of resource saving using modern re-regulating substances and biologicalpreparations is advisable, because it increases not only the level of grain yield, but also themain indicators of agro-economic efficiency - net profit and profitability, and unit cost, on thecontrary, decreases. It was established that by optimizing the nutrition of spring barley on thebasis of resource saving by treating crops in the main growing seasons with biological products,along with increasing grain yield and changes in its quality, other indicators of agro-economicefficiency of crop production increase. The level of profitability in control (treatment of plantswith water) for the cultivation of barley of the spring variety Stalker was 59.2%, then in themost optimal food options it reached 93.8%, and for the Vakula variety they were determined61.0 and 99.5% respectively. The obtained agroeconomic indicators in the cultivation of springbarley made it possible to substantiate the following claims: the use of biologics to treat thesowing of spring barley plants during the main periods of vegetation increases the yield and costof grown grain. It was determined that the level of profitability of growing spring barley witha large number of feeds grew. The indicator reached its maximum value with three times theplanting of barley plants of the spring variety Vakula with Fresh florid, that is, 300 g/ha (99.5%).Two plant crops with this drug provided profitability at the level of 99.1%, and one ‒ 85.6, (incontrol ‒ 61.0%). The highest profitability of cultivation was ensured by the use of Fresh florid(300 g/ha) for optimizing nutrition three times for vegetation ‒in the phases of tillering, shootingand heading. The lowest level of profitability was ensured by the use of the preparation OrganicD-2 M for feeding barley of the spring variety Vakula: one treatment of plants ‒ at the level of60.6%, two ‒ 72.5, three treatments ‒ 78.2%. According to the results of research conductedwith two varieties of spring barley, the best biological product and terms of fertilization weredetermined in order to increase grain yield and improve its quality and agro-economic efficiencybased on the calculation of cost economic indicators. The expediency of nutrition optimizationby using modern biological products for spring barley cultivation has been confirmed.
- Published
- 2021
- Full Text
- View/download PDF
10. MEASURES TO REDUCE THE DEFECTIVENESS OF AVIATION PRODUCTS AND ASSESSMENT OF THE EFFECTIVENESS OF ITS IMPLEMENTATION
- Author
-
L. V. Orlova and P. V. Zobov
- Subjects
competitiveness ,cost price ,defectiveness of aviation products ,efficiency assessment ,international standards ,quality system ,tactical measures ,technology ,Sociology (General) ,HM401-1281 ,Economics as a science ,HB71-74 - Abstract
The article considers the problems of reducing the quality of aviation products, leading to the loss of competitiveness of finished products and an increase in cost price. In the course of the study, the authors analysed the reasons for the appearance of defective products at an aviation manufacturing enterprise. Based on the information received using modern data processing methods, the paper determines the main weaknesses of the considered technological stage of aviation products. Having studied modern international quality standards in the field of aviation construction, the authors proposed measures that would reduce the number of defective products and increase the reliability and competitiveness of finished products. The article presents separately the model for evaluating the effectiveness of measures to reduce the defectiveness of aviation products. The paper carries out assessment of the proposed tactical measures to reduce the level of defective products, which will increase the economic performance of production activities in certain areas of production.
- Published
- 2021
- Full Text
- View/download PDF
11. Multi-objective optimization of the wet at the blade's inlet and surface heating for wet steam flow in turbine blade cascade by TOPSIS method.
- Author
-
Lakzian, Esmail, Dadpour, Daryoush, Aghdasi, Mohammad Reza, Gholami, Mohsen, and Kim, Heuy Dong
- Subjects
- *
TOPSIS method , *TURBINE blades , *STEAM flow , *STEAM-turbines , *INLETS , *KINETIC energy - Abstract
• The optimal surface heating and droplet injection for wet steam have been obtained. • Kinetic energy, erosion, wetness, loss, and cost are considered objective functions. • The optimal case indicates an increase in the kinetic energy ratio by 8.68 %. • In the optimal case, erosion is reduced by 14.17 %, wetness by 2.8 %, and loss by 0.91 %. In the last stages of the steam turbine, due to the reduction in pressure, the inlet flow is accompanied by droplets. The innovation in this study pertains to determining the optimal amount of surface heating (SH) and wetness at the inlet (WAI) using the TOPSIS method for the turbine blade cascade. In this context, three conditions have been simulated: WAI (wetness at the inlet), SH (surface heating), and simultaneously with WAI and SH. The kinetic energy ratio (KER), erosion rate ratio (ERR), wetness fraction ratio (WFR), condensation loss ratio (CLR), and cost price (CP) are considered objective functions. Navier–Stokes equations coupled with nucleation and droplet growth equations are obtained together by applying S S T k − ω. Numerical method validation is conducted with Bakhtar's data. Finally, case 1-B is proposed as the optimal case. In this case, the SH is equal to 180 (k W m 2) and the average wetness fraction is equal to 1 %. The comparison of the optimal case with the original case indicates that the kinetic energy ratio is increased by 8.68 %, the erosion rate ratio is reduced by 14.17 %, the wetness fraction ratio is reduced by 2.8 %, and the condensation loss ratio is decreased 0.91 %. [Display omitted] [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
12. Cost-Effectiveness Assessment of the Scale of Hydrogen Production by Various Methods.
- Author
-
Makaryan, I. A. and Sedov, I. V.
- Subjects
- *
PRODUCTION methods , *COST effectiveness , *COMPUTER simulation , *ECONOMIC efficiency , *ECONOMIC indicators , *HYDROGEN production , *STEAM reforming , *NATURAL gas pipelines - Abstract
The review examines the methods to evaluate the economic efficiency of various hydrogen production methods, including technologies to obtain hydrogen from natural gas (steam conversion, autothermal reforming, and combined methods) and other methods, currently proposed for application. A comparative analysis of the published data, studying the economics and the technical and economic indicators of hydrogen production, is carried out on the basis of modern mathematical modeling and computer data processing methods. The prospects of continuing the research in this area, especially in the development of small-scale production technologies, are noted; in the meantime, at present, natural gas can be considered as one of the most promising raw materials for hydrogen production. [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
13. Factor analysis of elements of construction products cost
- Author
-
F. Yerdavletova, R. Doszhan, and A.Zh. Nurmagambetova
- Subjects
cost price ,factor analysis ,construction products ,cost elements ,cost management. ,Economics as a science ,HB71-74 ,Marketing. Distribution of products ,HF5410-5417.5 ,Finance ,HG1-9999 ,Accounting. Bookkeeping ,HF5601-5689 - Abstract
The article deals with the topic of factor analysis of the cost of production and its elements. One of the main conditions for obtaining reliable information about the cost of production is a clear definition of the composition of production costs. The relevance of this topic is due to the fact that at the moment enterprises are forced to pay more attention to the cost of production in the system of indicators that characterize the efficiency of production and sales.The methodological basis of the research was the fundamental research of foreign and Kazakh re-searchers in this field, as well as regulations and statistics of the Republic of Kazakhstan, reporting indi-cators and other documents of the company under study.The main result of this study is to identify the efficiency of production by applying factor analysis. The method of chain substitutions established the cost items, the impact of which was the greatest on the effective indicator – the cost of construction products of the company under study.As a result of the research, recommendations for reducing the cost of production were proposed for the analyzed company. In general, the analyzed company should try to reduce its costs as much as pos-sible. In the course of the factor analysis, ways to reduce the cost of production were proposed.In conclusion, the authors conclude that the demand for specialists in construction today far exceeds the supply on the labor exchange, and as a result, construction companies are forced to settle for low-skilled workers. The lack of professional staff in the industry leads to a number of problems. This includes the absence of estimated documentation for construction projects, low average monthly wages, delays n the delivery of objects, a decrease in the quality of work performed: the presence of a large number of marriages, forced overspending of materials, etc.
- Published
- 2020
- Full Text
- View/download PDF
14. Opportunities for the Application of a Model of Cost Management and Reduction of Risks in Financial and Economic Activity Based on the OLAP Technology: The Case of the Agro-Industrial Sector of Russia
- Author
-
Liudmila I. Khoruzhy, Yuriy N. Katkov, Ekaterina A. Katkova, Valeriy I. Khoruzhy, and Meri K. Dzhikiya
- Subjects
digital twin ,cost price ,target costing ,kaizen costing ,decision-making ,business strategies ,Insurance ,HG8011-9999 - Abstract
The development of cloud technologies enables companies to actively implement technologies for cost management and risk reduction in their financial and economic activities. The use of cloud-based models of risk management in the financial and economic activities of the enterprise will help small and medium-sized companies in the agro-industrial sector in Russia to make structural and strategic changes, as well as discover new opportunities for business expansion. The purpose of the study is to develop models for cost management and reduction of risks in the financial and economic activities of companies based on the OLAP technology for application in Russian agro-industrial enterprises. The study employs a qualitative approach based on the case study methodology. The paper discloses and substantiates the authors’ conceptual model of a cost management system that allows executives to make decisions proceeding from four types of cost prices. The distinguishing feature of the management system is the use of a digital twin, which makes it possible to manage risks at the early stages of decision-making. The application of OLAP systems improves the quality of analysis and visualization methods as part of the cost management system. In addition, the study provides practical insight into how the applied model will help small and medium-sized agro-industrial enterprises to develop different business vision strategies based on cost reduction, manage the level of risk at the early stages of decision-making, and analyze information from a geographically dispersed logistics chain of divisions (production facilities, warehouses, stores).
- Published
- 2022
- Full Text
- View/download PDF
15. Estimation of the cost price of the enterprise with the possibility of modeling contract positions
- Author
-
A. V. Damarad and V. P. Shcherbakova
- Subjects
production ,costs ,cost price ,modeling ,calculation ,Mining engineering. Metallurgy ,TN1-997 - Abstract
The need to account for cost price occupies an important place in the enterprise management system. One of the important tasks of accounting for cost price is to control the cost of production. The cost price includes the total costs necessary for the enterprise to carry out production and commercial activities related to the production and sale of products, that is, everything that the enterprise costs to produce and sell products.To determine the economic benefits of selling the company’s finished products, it is necessary to know the final cost of the proposed contract. The amount of profit directly depends on the correctness of setting the sales price of products. This article discusses the assessment of the economic effect when modeling various contract positions based on the cost price of the enterprise, which will allow you to quickly solve production issues.The source data is information stored in the SAP ERP (Enterprise Resource Planning System) system: materials, component lists, component standards, etc. The source data processing and analysis system is SAP BI (Business Intelligence). To display the final result, we use a program designed for working with Microsoft Excel spreadsheets.
- Published
- 2020
- Full Text
- View/download PDF
16. Modern Approaches to the Integration of the National System of Cost Accounting with International Financial Reporting Standards
- Author
-
E. Tyukhova, M. Khanenko, and O. Shaporova
- Subjects
international standards of financial accountability ,management accounting ,russian accounting standards ,cost price ,expenses ,costs ,Social Sciences ,Finance ,HG1-9999 ,Law ,Economic theory. Demography ,HB1-3840 - Abstract
The article deals with the main modern approaches to the integration of the national system of cost accounting. The authors analyze and compare the national approaches and IFRS regulations in this area.
- Published
- 2019
17. Generating cost price for crop residues
- Author
-
Ivan Bavrka, Branka Šakić Bobić, Lari Hadelan, Željko Jukić, and Ana Matković
- Subjects
baling cost ,corn stover ,cost price ,wheat straw ,Agriculture - Abstract
Considering growing interest and potential for biomass energy production as an alternative to imported oil and as a mode of reducing environment pollution, there is a demand for calculating the economic justification of using crop residues for increasing income. This article suggests a way of generating cost price for baled corn stover and baled wheat straw. The cost price of baled crop residues is the sum of the cost of removed nutrients and the cost of machine and labor work required for balling and operations of moving and settling the bales on the parcel. For the purposes of calculation, a 130 hp tractor with round baler for 250 kg bales and a 75 hp tractor with a front loader were used. Based on the results, it was concluded that the value of harvested residues based on nutrients (N, P2O5 and K2O) is 110.47 HRK/t for corn stover and 73.65 HRK/t for wheat straw. The results showed that for corn stover and wheat straw, the cost of pressing (baling) is 86.25 HRK/t, while the cost of moving and settling the bales on the parcel is 34.69 HRK/t.
- Published
- 2019
- Full Text
- View/download PDF
18. FEATURES OF COST AND MANAGEMENT ACCOUNTING IN CONSTRUCTION COMPANY
- Author
-
O. Ageeva and E. Kozhinova
- Subjects
cost and management accounting ,cost ,method ,cost price ,costing items ,construction ,civil and erection works ,Sociology (General) ,HM401-1281 ,Economics as a science ,HB71-74 - Abstract
The article is devoted to research features of methodical approaches of cost and management accounting in construction. The article describes the main characteristics of the classification of costs depending on the goals of the management accounting, summarizes the advantages and disadvantages most frequently used methods. Also it has been identified application features of methods of cost and management accounting based on the specifics of the construction industry.
- Published
- 2019
19. New Biogas Use Technologies As a Method for Solving Environmental Problems.
- Author
-
Kulagin, V. A., Dunaeva, N. V., and Yakovleva, D. D.
- Abstract
New technological ways of using biogas—an energy resource widespread in many countries of the world—are analyzed. Biogas is considered not only as a form of energy but also as a means of solving environmental problems, in particular, in Russian megacities, where the problems of solid municipal waste disposal and environmental pollution are most acute. The world experience of using biogas and the prospects for its use in Russia are presented considering national characteristics, competition with other types of fuel, and government regulation. [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
20. Investigation on Battery for Electric Vehicle Application
- Author
-
Revathy R. and Visveswar J.
- Subjects
electric vehicle ,batteries ,storage efficiency ,cost price ,lithium-ion battery ,zebra ,bev ,Information technology ,T58.5-58.64 - Abstract
Battery powered electric vehicles are becoming increasingly important in the automotive industry. It is hard to decide which battery meets all the most important characteristics from different perspectives such as energy storage efficiency, construction characteristics, cost price, safety and service life of today’s Electric Vehicles. Investigation on different types of batteries are discussed in this paper. Among the most important components of a car is the battery. Only the stored electrical energy in the battery provides the power for BEVs which is the unique source of energy. Various types of batteries are used in electric cars depending on their systems. The lithium-ion battery is the most common electric car battery. A battery which is considered zero emission is abbreviated as ZEBRA. In this paper, we can gain knowledge over the different types of battery options available for electric vehicles, along with their characteristics.
- Published
- 2022
- Full Text
- View/download PDF
21. Management Accounting.
- Author
-
GLOMAZIC, Jadranka
- Abstract
Healthcare institutions are business systems that provide different medical products and services to improve the health and quality of life of users of products and services. First of all, this is reflected in the differing complexities of the business, but also of the products and services they offer, as well as the different costs they cause. Thus, some products or services cause high indirect costs, while others require higher direct costs. For health care managers to make the right business decisions, they must continually have timely, quality and truthful information at their disposal. This information is provided by the management accounting of the institutions. This paper aims to present management accounting activities that enable the acquisition of information necessary for decision making. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
22. Do Firms post Prices after Seeing the Cost Pricing Programs of Competitors?
- Author
-
Subhani, Muhammad Imtiaz and Osman, Amber
- Subjects
PRICES ,PRICE marks ,PRODUCT costing ,BUSINESS enterprises ,COST - Abstract
The price tag on any product has always been enticing to customers irrespective of the era and is a key factor in the purchase intention decision. Pricing behavior incorporates strategies to position the brand in the market. This paper explored whether the pricing strategy (setting market price) of a firm is determined by its own production cost for a product or by the cost pricing programs of other firms (competitors). It found that the pricing strategy for a product varies among firms. The findings confirmed that for high involvement substitutes, the pricing behavior of a firm mainly depends on its own production cost, in contrast to low involvement substitutes. The AR (1) process is present in the series of market prices for both of the HI substitutes, which reflects that pricing programs for HI substitutes for current and future periods also rely on their pricing history. The AR1-process was reversed for LI substitutes. [ABSTRACT FROM AUTHOR]
- Published
- 2020
23. Cost structure of wood harvesting in northwest Russia.
- Author
-
PETROV, Vladimir Nikolaevich, KATKOVA, Tatyana Evgenyevna, KARVINEN, Sari, and MUTANEN, Antti
- Subjects
WOOD ,COST structure ,LOGGING ,FORESTS & forestry ,TAXATION of timber ,LEASES - Abstract
Copyright of Revista Espacios is the property of Talleres de Impresos Oma and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
- Published
- 2020
24. THE PRACTICE OF APPLYING MANAGEMENT ACCOUNTING MODELS TO DIFFERENT STAGES OF CONSTRUCTION ACTIVITIES.
- Author
-
Nurkasheva, N. S., Aidynov, Z. P., Nurmagambetova, A. Z., Jondelbaeva, A. S., and Akimbaeva, A. T.
- Subjects
ACCOUNTING ,CONSTRUCTION industry ,INVESTMENTS ,ELECTRONICS ,INFORMATION storage & retrieval systems - Abstract
Copyright of Central Asian Economic Review is the property of Narxoz University and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
- Published
- 2019
25. Students’ Use of Their Languages and Registers : An Example of the Socio-Cultural Role of Language in Multilingual Classrooms
- Author
-
Bose, Arindam, Clarkson, Philip, Halai, Anjum, editor, and Clarkson, Philip, editor
- Published
- 2016
- Full Text
- View/download PDF
26. ECONOMIC ASPECTS OF CATTLE FATTENING PRODUCTION IN LOWLAND REGION OF THE REPUBLIC OF SERBIA.
- Author
-
Miljatović, Aleksandar and Vukoje, Veljko
- Subjects
- *
INTERNAL rate of return , *CATTLE , *MARKET prices , *CATTLE prices , *INTEREST rates - Abstract
This paper examinees economic, production and organizational aspects of cattle fattening production. The aim of the paper is to determine and evaluate profitability level of cattle fattening production. This is being examined throw the determination of the justification of investment in raising a modern fattening farm in domestic conditions. The results of the survey indicate that investment in rising a modern fattening farm is payable after 8 years and 350 days, which can be considered as an acceptable period of time for this kind of production. Internal rate of return is relatively high (13.25%) and it is much higher than average level of current interest rates. The cost prices of the cattle from own production (200.0 RSD/kg) is significantly lower than the cost price of the bull’s from import (218.9 RSD/kg). Sensitive analysis shows that the cattle from own production can sustain significant increase of material costs (up to 49%), i.e. decrease of market prices of final products (up to 32%). [ABSTRACT FROM AUTHOR]
- Published
- 2019
27. Кукурудза: параметри сівби
- Subjects
productivity ,hybrid ,conditional net profit ,гібрид ,собівартість ,depth of wrapping ,seeds ,кукурудза ,урожайність ,умовно чистий прибуток ,рівень рентабельності ,corn ,weight of 1000 seeds ,маса 1000 насінин ,глибина загортання ,cost price ,висота рослин ,height of plants ,level of profitability ,насіння - Abstract
Aim. To highlight the results of the research conducted in 2020 – 2021 aiming at studying the ffect of multi-depth and multifraction sowing of the hybrid corn seeds of the DMS Sticker mid-early maturity group on the yield when grown in the conditions of the Northern Steppe of Ukraine and determine the economic efficiency of the approaches.Materials and methods. Winter wheat was a predecessor crop in the study. Tillage methods and related conditions are described in the article. Herbicides were used to protect against weeds. Sowing was carried out in the third decade of April at a soil temperature of +8 – 10 ºС. The experiment considered 2 factors, namely the depth of sowing seeds and the size of the seed fraction. The results obtained were processed using measurement, mathematical and statistical methods of research, as well as calculation and comparison approaches.Results and discussion. On average, depending on the factors studied, the height of the plants varied significantly, as a rule, the tallest plants were obtained from large seeds, which had the highest mass of 1000 seeds. Thus, in particular, on average over two years of research, the height of the plants was 250.4 cm when the weight of 1000 seeds was 255 g, and the seeds were wrapped by 4 – 5 cm; when the weight of 1000 seeds was 300 g, the height was 251.1 cm, while with the weight of 350 g it was 258.3 cm; with the wrapping depth of 7 – 8 cm the height was 252.1 cm, 255.8 and 268.5 cm, and with the wrapping depth of 10 – 11 cm it was 257.6 cm, 261.8 and 266.1 cm.Conclusions. The use of the large seed fraction provided an increase in the yield of the DMS Sticker corn hybrid by 1.09 – 1.79 t ha-1 compared to the use of the small seed fraction and was 8.70 t ha-1. When using the large seed fraction and the wrapping depth of 10 – 11 cm, the cost of production was 56,550 UAH ha-1. The cost price of 1 ton of production was the lowest and amounted to UAH 2,247.1, the conditional net profit was the highest – 37,000 UAH ha-1, and the level of profitability was 189.3 %., Мета. Висвітлити результати наукових досліджень 2020 – 2021 рр., метою яких було виявити вплив на врожайність різноглибинної та різнофракційної сівби насіння гібриду кукурудзи середньоранньої групи стиглості DMS Sticker за вирощування в умовах Північного Степу України та визначити економічну ефективність застосування такої сівби.Матеріали та методи. Культурою-попередником у дослідженні була озима пшениця. Способи обробляння ґрунту та супутні умови описано в статті. Для захисту від бур’янів використовували гербіциди. Посів здійснювали в третій декаді квітня за температури ґрунту +8 – 10 ºС. Експеримент враховував 2 фактори, а саме: глибину посіву насіння та розмір фракції насіння. Отримані результати обробляли, використовуючи вимірювальні, математичні і статистичні методи дослідження, а також розрахунковий та порівняльний підходи.Результати та їх обговорення. Залежно від досліджуваних факторів, висота рослин істотно змінювалася: як правило, найвищі рослини були отримані з крупного насіння, що мало найбільшу масу 1000 насінин. Так, зокрема, за маси 1000 насінин 255 г у разі загортання насіння на 4 – 5 см пересічно за два роки досліджень висота рослин становила 250,4 см, за маси 1000 насінин 300 г – 251,1 см, а у випадку маси 1000 насінин 350 г – 258,3 см; за глибини загортання 7 – 8 см – 252,1 см, 255,8 і 268,5 см, а за глибини загортання 10 – 11 см – 257,6 см, 261,8 і 266,1 см.Висновки. Використання великої фракції насіння проти дрібної забезпечило збільшення врожайності гібрида кукурудзи DMS Sticker на 1,09 – 1,79 т га-1 порівняно з використанням дрібної фракції насіння і становило 8,70 т га-1. За використання великої фракції насіння та глибини загортання 10 – 11 см собівартість продукції становила 56 550 грн га-1. Собівартість 1 т продукції була найнижчою і становила 2 247,1 грн, умовно чистий прибуток був найвищим – 37 000 грн га-1, а рівень рентабельності – 189,3 %.
- Published
- 2023
28. THE PROBLEM OF PIG MEAT PRODUCTION PROFITABILITY IN HOUSEHOLDS: RESULTS AND ANALYSIS
- Author
-
Grigore BALTAG and Adrian POPESCU
- Subjects
profitability ,trend ,cost price ,sales revenue ,swine livestock ,Economics as a science ,HB71-74 - Abstract
The paper addresses the problem of low profitability of fresh pork production in Moldovan pig farmers. The author analyses, in a complex way, the structure of the production of pork from the producer to the processor, which identifies the main problem – the added value to the pig producers is well below that of the processors and its size does not allow the economic development. The Sensitivity Analysis in the paper presents some possible scenarios for obtaining a sufficient return. It proposes a matrix of profitability of pork production on the basis of the researches carried out. As a factual basis for the elaboration of this scientific article, the field results obtained within the project “Determining the influence of the factors influencing the change of the efficiency of the meat breeding efficiency in the conditions of liberalization of the internal market” within the State Program Development of competitiveness and economic growth In the context of an economy based on knowledge, globalization and regional and European integration.
- Published
- 2017
29. CALCULATION PECULIARITIES OF RE-PROCESSED ROAD COVERING UNIT COST
- Author
-
Dilyara Kyazymovna Izmaylova and Nikolay Dmitrievich Seliverstov
- Subjects
processing ,road coverage ,repair ,asphalt granulate ,material transportation ,cost price ,Construction industry ,HD9715-9717.5 - Abstract
In the article there are considered questions of economic expediency of non-waste technology application for road covering repair and restoration. Determined the conditions of asphalt-concrete processing at plants. Carried out cost changing analysis of asphalt granulate considering the conditions of transportation and preproduction processing. Given an example of expense calculation of one conventional unit of asphalt-concrete mixture volume preparation with and without processing.
- Published
- 2017
- Full Text
- View/download PDF
30. Optimizing the business operations of military production facilities
- Author
-
Žugić Rade and Mijić Duško
- Subjects
production and service providing facilities ,business processes ,planning ,production ,performance measurement ,costs ,cost-effectiveness ,cost price ,norm ,standard ,Military Science - Abstract
Production and service providing facilities of the Ministry of Defense and the Serbian Armed Forces are intended for production of goods and provision of specific services needed by the defense system of the Republic of Serbia. The main aim of their creation and existence is continuous support to the functions of defense as one of the state's priority tasks, and ensuring independence from external factors. Because of this role, production and service providing facilities are organized as production units applying all the principles of technology and technical procedures for specific products or services. In other words, their functioning is based on a functional model of controlling the spending of budget funds and the implementation of the principle of performance measurement, i.e. control of costs in all stages of business processes execution. Further operationalization of this model should provide accurate cost information at each stage of the business process - from the planning phase, on which the adoption of adequate and optimal business decisions depends, then the manufacturing phase, and, finally, the phase of the performance measurement. Better regulation of the system elements and their integration into the information system will create conditions for realistic and effective cost monitoring and management in the production processes of the production and service providing facilities, and the efficient spending of budget funds.
- Published
- 2017
- Full Text
- View/download PDF
31. Investment challenges in milk sector (Case of a dairy factory in southwest of Algeria): Development prospects.
- Author
-
Benyagoub, Elhassan
- Subjects
- *
DAIRY processing , *FERMENTED milk , *DAIRY farms , *MILK , *INVESTMENTS , *DAIRY products - Abstract
In this work, we are interested in studying the investment challenges of packaged reconstituted milk production in Southwest of Algeria. To reach this objective, we have calculated the cost price of two products (pasteurized milk and fermented milk) which present the main production line of the dairy factory of Bechar, to assess the profitability of the company. The cost price of milk was calculated from the general balance that shows all the movements of the accounts which we have established the table of counting results 'TCR' corresponding to the different charges directly related to the milk manufacturing. The analysis of spending data showed that for this factory, the cost price of one liter of pasteurized milk was estimated at 27.06 DZD/L compared to fixed selling price at the dairy factory level (23.20 DZD/L), which reveals a deficit of -3.86 DZD/L (-16.63%), while produced fermented milk showed a profit of +14.65 DZD/L representing a margin of distribution equivalent to (+60.16%) of the cost price that was estimated at 24.35 DZD/L. This study provides a platform which can be used, not only, to define the ability of dairy factory to overcome competitive market challenges, but also the pre-requisite programs (PRP) installation challenges required to implement a quality system promoting the quality of milk and dairy products. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
32. Generating cost price for crop residues.
- Author
-
BAVRKA, Ivan, AKIĆ BOBIĆ, Branka, HADELAN, Lari, JUKIĆ, eljko, and ATKOVIĆ, Ana
- Subjects
CROP residues ,PLANT biomass ,BIOMASS energy ,WHEAT straw ,AGRICULTURAL economics - Abstract
Copyright of Journal of Central European Agriculture is the property of Journal of Central European Agriculture and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
- Published
- 2019
- Full Text
- View/download PDF
33. INVESTMENT CHALLENGES IN MILK SECTOR (CASE OF A DAIRY FACTORY IN SOUTHWESTERN ALGERIA): DEVELOPMENT PROSPECTS.
- Author
-
BENYAGOUB, E. and BENYAGOUB, R.
- Subjects
- *
FERMENTED milk , *PROFIT margins , *MILK , *DAIRY products , *RAW milk , *DAIRY farms - Abstract
In this work, we are interested in studying the investment challenges of packaged reconstituted milk in Southwestern Algeria with respect to the high demand for this strategic consumer product. To reach this objective, we have calculated the cost price of two products (partially reconstituted milk and fermented milk) which present the main production line of the dairy factory of Bechar (Algeria) to assess the profitability of the company in terms of benefit or deficit. The cost price of milk is calculated from the general balance and shows all the movements of the accounts which we have established the table of counting results 'TCR' corresponding to the different charges directly related to the milk manufacturing. The analysis of spending data given by the TCR showed that for this factory, the cost price of one liter of pasteurized milk is estimated at 27.06 DZD/L compared a quay-factory fixed selling price at 23.20 DZD/L, which reveals a deficit of -3.86 DZD/L (-16.63 %), while produced fermented milk showed a profit of +14.65 DZD/L representing a margin of distribution equivalent to (+ 60.16 %) of the cost price that was estimated at 24.35 DZD/L. According to the obtained results, it appears that the dairy industries in Algeria, and elsewhere which are based mainly on milk powder as raw material for the manufacturing of reconstituted milk at a fixed price subsidized in a dairy policy of social character privileged by the state, can have significant profit margins generated primarily by dairy products that can be sold at a free price.This study provides a platform which can be used, not only, to define the ability of dairy factory to overcome competitive market challenges, but also the pre-requisite programs installation challenges required to implement a quality system promoting the quality of milk and dairy products. [ABSTRACT FROM AUTHOR]
- Published
- 2018
34. FEATURES OF COST AND MANAGEMENT ACCOUNTING IN CONSTRUCTION COMPANY
- Author
-
O. Ageeva and E. Kozhinova
- Subjects
cost and management accounting ,cost ,method ,cost price ,costing items ,construction ,civil and erection works ,Sociology (General) ,HM401-1281 ,Economics as a science ,HB71-74 - Abstract
The article is devoted to research features of methodical approaches of cost and management accounting in construction. The article describes the main characteristics of the classification of costs depending on the goals of the management accounting, summarizes the advantages and disadvantages most frequently used methods. Also it has been identified application features of methods of cost and management accounting based on the specifics of the construction industry.
- Published
- 2016
35. Thesaurus of accounting science: historical path of formation and present identification of «calculation» concept
- Author
-
S.V. Svyrko
- Subjects
concept ,thesaurus ,accounting ,calculation ,cost price ,calculation document ,calculation of cost price ,activity product calculation ,Business ,HF5001-6182 - Abstract
The issues of modern accounting terminology have been considered. As an object of research the sufficiently known and widespread concept of «calculation» has been chosen. The process of historical formation and development of the semantic content of the mentioned definition, the diversity of views on the interpretation and the approaches to use it in practice have been considered. These approaches have been analyzed and the inherent similarity on tautology of the frequently used phrase «calculation of cost price» has been identified. In order to resolve this problem the proposal to use the phrase «calculation of the product of activity (goods, work and services)» (in the context of the characteristics of the process of calculation) and «calculation of the X-th cost» (in the context of the mechanism for determining certain types of cost price where X is the corresponding type of the last) has been reasoned and it will provide a differentiation of content of the concept of «calculation» in the process of its deep context processing. The conclusions about the importance of further development of accounting terminological sphere under the current conditions of human development have been grounded and the ideas about the need to ensure systemic cooperation of linguist scientists and accountants to achieve a synergistic effect have been proposed.
- Published
- 2016
36. Cost analysis of education for students in the School of Health of Alborz University of Medical Sciences: An application of activity-based costing technique
- Author
-
Behrooz Pouragha, Mehdi Tayebi Arasteh, Ehsan Zarei, Mahdieh Abdolahi, and Hojjat Sheikhbardsiri
- Subjects
cost ,cost price ,health sciences ,medical education ,student ,Special aspects of education ,LC8-6691 ,Public aspects of medicine ,RA1-1270 - Abstract
INTRODUCTION: The educational service is expensive and having the right financial information is one of the most important tools for managing financial resources. Therefore, due to the importance of this issue, this study aimed to determine the cost of educational services for medical sciences students at Alborz University of Medical Sciences. METHODOLOGY: A cross-sectional study was conducted between March 20, 2018, and March 20, 2019, at Alborz University of Medical Sciences. The current and capital cost data were extracted from the university's financial database, and the cost price of services provided was calculated using the activity-based cost model. RESULTS: The mean annual cost of services per student was $4778, and the mean cost of education per hour was $113. The total cost price of services provided per student at the school was 65% for wages and salary, 26% for depreciation of building and equipment, and 9% for consumable goods and services. Furthermore, the share of different cost centers to the total cost price of services provided per student was 82% for educational services, 11.9% for student welfare services, and 6.1% for research services. CONCLUSION: Costs of personnel, especially pays to faculty members and the costs of capital expenditures, are the most important costs in higher education institutions. It seems reducing of pay to faculty members through novelty approach of education and evaluation, reducing capital expenditures through use effective of buildings and equipment that can be placed higher education institutions in the path to productivity.
- Published
- 2020
- Full Text
- View/download PDF
37. Jeweler’s Changed Focus Turns Red into Black : Dependent on passing-tourist trade, this jeweler found it impossible to do more than cover costs, let alone make a profit
- Author
-
Cleland, Keith N. and Cleland, Keith N.
- Published
- 2013
- Full Text
- View/download PDF
38. Analysis of Cost Price and Net Profit of Paraclinic Services in Private and Public Sectors: A Case Study of Kerman City 2014
- Author
-
Mohammad Jafari Sirizi, Mohsen Barouni, and Asma Saber Mahani
- Subjects
Radiology ,Laboratory ,Cost price ,Activity-based costing ,Private and public tariffs ,Business ,HF5001-6182 - Abstract
Introduction: Cost is becoming a growing concern for the managers of health and treatment institutes both in private and public sectors. Based on the opinions of pathology and radiology specialists and experts, one private and one public center for radiology and laboratory were selected to study in Kerman City. Method: This is a cross-sectional and applied study. The two centers were similar in frequency of their services, different tests they were conducting, and their number of personnel. Afterwards, the costs of services in both fields were determined using the activity-based costing method. This study was carried out from March 21 to September 22, 2014. The costs of services in both private and public sectors were compared to the tariffs of the Ministry of Health in 2014. Results: Laboratory results indicated that the costs in all the selected tests were higher than the tariffs and the largest difference (app. 84,930 Rls) was observed in the TSH test while the smallest difference was observed in the ferritin test (11,940 Rls). However in the private sector, vitamin D and FBS tests were not profitable with differences of about 5500 and 6500 Rls, respectively. In other tests, the costs in the private sector were lower than the tariffs for the private sector. In the private sector radiology center, only the MRI services were not profitable but the other services were. The cost of MRI services in the private sector studied in this research was 190,000 Rls higher than the private sector tariffs. Conclusion: In this study, the results showed that CT scan services were the most profitable services and the price difference was about 203,000 Rls per service. However, all of the radiology services were unprofitable in the public sector and the largest price difference was seen in MRI services which was about 590,000 Rls per service.
- Published
- 2015
39. Supply of goods free of charge in value added tax system
- Author
-
Milošević Miloš
- Subjects
Value Added Tax ,Supply of Goods Free of Charge ,Purchase Price ,Cost Price ,Non-business Purposes ,Law - Abstract
Consideration represents one of the cumulatively prescribed conditions for the taxation of supplies of goods in value added tax system. In the absence of consideration there is in general no basis for taxation, which makes room for untaxed final consumption - the case in which a taxpayer deducts input VAT on purchased good that is subsequently used for his own or another person's final consumption free of charge. In this paper, the author analyzes the situations in which, for taxation purposes, the supplies of goods free of charge will be treated equally as supplies for consideration and, relying on the jurisprudence of the European Court of Justice, notes the deviations of the domestic practice from the communautaire one, while providing concrete recommendations for their elimination.
- Published
- 2015
- Full Text
- View/download PDF
40. Показники економічної ефективності вирощування курей DOMINANT GREENSHELL
- Subjects
DOMINANT GREESHELL ,poultry ,egg-laying ,egg production ,cost price ,profitability ,кури ,несучки ,виробництво яєць ,собівартість ,рентабельність - Abstract
The article examines the peculiarities of the DOMINANT GREENSHELL egg-laying poultry, in particular, the indicator of laying capacity in floor-level growing. Environmental factors affecting the viability and productivity of chickens have been analyzed. Data of the experiment has been given and such shortcomings of keeping as loss and high specific weight of dirty and broken eggs have been revealed. The components of the cost price and the change in the cost price of finished products in different periods of poultry breeding have been highlighted. On the basis of the conducted experiment, an explanation has been made regarding the impact of production costs on the cost price of eggs, in particular compound feed. The profitability of the production of eggs with a colored shell for floor-level growing has been analyzed and the necessity of selling them in the premium segment has been proved., У статті досліджено особливості кросу DOMINANT GREENSHELL. Особлива увага приділена питанням особливостей життєдіяльності та показникам продуктивності курей різного віку. Перевагою даного кросу є можливість сортування добових курчат на півника та курочку за кольором та щільністю пір’я у добовому віці. Це значно спрощує процес виробництва, дозволяючи планувати кількість несучок на півнів. Детально проаналізовано та наведено структуру комбікорму для добових та дорослих курей, пояснено зміну в пропорції зернових культур залежно відфізіологічних потреб птиці. Наведено точні дані щодо вимог птиці у споживанні комбікормів та води.Виділено три ключові фактори, що впливають на несучість курей. Науково підтверджено, що фотоперіодизм, раціон годівлі та стрес найбільше впливають на кількість та розмір яєць. Висвітлено виробничий дослід вирощування курей за підлогового утримання, виявлено такі недоліки, як падіж та високу питому вагу битих та брудних яєць. За результатами спостереження наведено дані щодо споживання комбікорму, витрат ветеринарних препаратів, рівня несучості та собівартості яєць у різні періоди росту та розвитку курей. Витрати комбікорму варіюються від 2.13 грн/голову в добовому віці до 14,25 до початку яйцекладки. Собівартість яєць становить 1,05-4,73 грн/шт. Проаналізовано показник собівартості яєць зі кольоровою шкаралупою та доведено необхідність їх реалізації для преміум сегменту. Аргументовано можливість збільшення рентабельності виробництва на 15-35 % в залежності від ринкової ситуації та споживчого попиту. Теоретично досліджено та практично підтверджено, щокрос DOMINANT GREENSHELL наділений високими показниками життєздатності та несучості є економічно вигідним для підприємств галузі птахівництва.
- Published
- 2022
41. Cost calculation model for a tank battalion fielded in an offensive operation
- Author
-
Jukić Jadranko and Knežević Zoran
- Subjects
cost price ,tank battalion ,offensive operation ,parameter ,factor ,calculation model ,Military Science - Abstract
Armored units, since their introduction, and especially after World War II, represent the main maneuver and attack power of modern armies due to their main characteristics (armor protections, mobility, and fire power). In some armies, only the units equipped with tanks are considered as armored units, but in some armies they include also the units equipped with armored personnel carriers and mechanized infantry combat vehicles. In modern armies, infantry units are largely equipped with infantry fighting vehicles, mainly wheeled ones. In the Serbian Armed Forces, armored units consist of tank and mechanized battalions included in the Army brigades. Tank and mechanized battalions are equipped with tanks and infantry fighting vehicles. They represent main attack power of the brigade and they conduct armored, antiarmor, anti-artillery and anti-rocket actions in combat operations. Regardless of the organizational-formation structure, fielding even the smallest tank battalion in different operations is very expensive due to the use of their heavy weapons and high consumption of fuel and ammunition. The paper describes the most important parameters required to calculate costs of the tank battalion involvement in an offensive operation (without attached units, without calculation of the fire support provided by artillery and air force units, and focusing on the operation execution phase), such as personnel, command, movement and maneuver, weapons and ammunition, service support and force protection. The final part of the paper offers a possible cost calculation model for the use of a tank battalion in an offensive operation by parameters, taking into account the factors that define it more closely. Due to the scope of the paper, it is impossible to fully describe the impact of operational environment and the operational model on the cost, because it would have to be the subject of further scientific analysis and a paper of larger scope. The cost calculation model offered might also be applied to other types of battalions, with the respective factors being changed by parameters.
- Published
- 2014
- Full Text
- View/download PDF
42. Cost calculation model for a combat operation of the Serbian Armed Forces
- Author
-
Mihajlović Milan, Slavković Rade, and Stojanović Saša
- Subjects
model ,cost price ,combat operation ,the serbian armed forces ,Military Science - Abstract
Successful countering of modern challenges, risks and threats requires making optimal decisions about how to use the forces, often during combat operations, to accomplish the assigned missions and tasks. Optimality is reflected in maximum rationalization of the operation costs, or in the selection of the mode of performing the operation, which will contribute to successful implementation of the mission at the least cost possible. Limited and, as a rule, insufficient funds impose a continuing need for costeffective, rational and efficient use of the funds available. Therefore, the place and role of the cost of operations in the decision-making process in peace and in wartime, should be given special importance, especially bearing in mind that the costs are one of the most important economic categories. The methodology of calculating the cost of a military operation varies depending on the economic systems of the countries that perform the operation, their level of development, the type of operation, etc. Its cost price depends on several elements: the objective of the operation, type, duration, resources required for the achievement of the objective, etc. The regulations, under which the material and financial operations are performed in peacetime, provide their performance in wartime as well, but with necessary adjustment to specific war situation. This applies to all government institutions and the economy of Serbia, and hence to the defense system as well. The defense spending is planned in peacetime, according to the approved procedure. Pursuant to the above, operations planning from the viewpoint of expenditures and costs should be done in compliance with the regulations under which material and financial operations are carried out in peacetime. The paper aims to present the way to determine the cost of a combat operation in terms of making optimal decision, which ensures the accomplishment of the task of using the forces in an operation at optimal cost. The cost price of a combat operation refers to the consumption of human and material resources. The implementation of activities aimed at effective provision, deployment and use of human and material resources creates a precondition for achieving the objectives of the operation.
- Published
- 2014
- Full Text
- View/download PDF
43. Model program for the calculation of tactical level operations cost
- Author
-
Mladenović Predrag, Karović Samed, and Kovač Mitar
- Subjects
tactical level operations ,cost price ,program ,Military Science - Abstract
Through an analysis of an operation at the tactical level, the paper offers an answer of how much the capabilities to perform missions and tasks cost in the conditions of restrictive financing, taking into account the current condition of organizational systems, the condition of the environment, and the projection of required capabilities. All the expenditures and spending incurred to create results have a nature of costs. They need to be based on a quantitative component of costs expressed as a certain value or valued at respective cost prices. After the introduction, the paper deals with matters important for consideration of the cost price of operations with an emphasis on presenting the costs of achieving the required capabilities to perform the operations of tactical level, as follows: 1) tactical level operations; 2) program for the calculation of the tactical level operations cost; 3) the tactical level operations cost price. Finally, conclusions are presented, which were made during developing this very complex and pioneering project, primarily aimed to define the cost price and to assess its impact on the performance of the tactical level operations.
- Published
- 2014
- Full Text
- View/download PDF
44. Optimization of military operation cost price by using multi-criteria analysis method
- Author
-
Žižović Mališa and Kelemenis Ksenija
- Subjects
cost price ,military operation ,optimization ,multi-criteria analysis (mca)method ,Military Science - Abstract
The military operation is defined as a complex project, which is implemented as a planned process, in which objectives of diverse importance are achieved, with limited resources, within a specific area, and for a specific time. The cost price is always a limiting factor, but may be a crucial one in decisionmaking. In addition to the necessity of making an optimal decision on the use of forces in an operation for the purpose of achieving the desired final situation, it is very important to achieve the objective at as little cost as possible. The paper presents a multi-criteria analysis (MCA) method, specially developed for this problem, which is used for the optimization of the cost price. A number of variants of action Ni have the outputs/results that can be presented as quantitative values Yik , which have the probability of occurrence pik and different cost price Cik. Now the effectiveness can be calculated as a mathematical expectation, as well as the cost price of the variant Ni as the mathematical expectation of the sum of the products of the price multiplied by the probability of its occurrence. The aim is to achieve as greater effectiveness and as lower cost price as possible. Optimal variant is the one which has lower cost price than all those variants that are more effective, and the effectiveness greater than all those variants that are less expensive.
- Published
- 2014
- Full Text
- View/download PDF
45. Planning the operation expenses
- Author
-
Žugić Rade and Kovačević Milanko
- Subjects
military operation ,planning ,expenses ,cost-effectiveness ,cost price ,norm ,standard ,criterion ,strength ,Military Science - Abstract
Defense is one of the highest priorities of any state. The state plans and defines the defense policy, and the responsibility for defense activities performance is held by the Ministry of Defense and the Armed Forces. The state, starting from its strategic missions and economic power, allocates funds for preparation and performance of defense activities. The conduct of operations, as the basic and fundamental form of the use of military forces in wartime and peacetime, represents the key (basic) form of the defense activities performance. In order to achieve the objective of an operation, it is necessary to provide proper resources. The planning and financing system is a good foundation for establishing an optimal and balanced relation between the objective of an operation and the available funds, through planning and calculation of realistic costs. It is based on the classification of expenses according to the functional model of cost distribution. Further operationalization of this model should provide realistic information about the expenses in each phase of the operation, especially during the planning phase which is decisive for making an adequate decision. In our circumstances, the planning and financing system is not yet at the necessary level, precisely due to vaguely defined basic planning elements (norms, standards, criteria, and units of standardization). The normative regulation of planning elements and the integration into the necessary information system will help create conditions for realistic and efficient planning of operation expenses and functioning of the Armed Forces.
- Published
- 2014
- Full Text
- View/download PDF
46. NEW GENERATION OF POLYMER DRILLING FLUIDS WITH LOW CONTENT OF CLAY FOR DRILLING OF WELLS IN DIFFICULT CONDITIONS.
- Author
-
Ratov, B. T., Igembayev, I. B., Omirzakova, E. Zh., and Zhanabayev, T. A.
- Subjects
- *
DRILLING fluids , *ANALYSIS of clay , *OIL well drilling , *BOREHOLES , *CALIPERS - Abstract
In nearly all oil and gas deposits of Kazakhstan well drilling is connected with overcoming the great difficulties encountered at drilling powerful easily dispersible clay deposits of various compositions. During drilling in nearfield under the action of the aqueous filtrate drilling fluids such clays swell, causing narrowing of the walls of boreholes with subsequent formation of caliper logs. These complications lead to a considerable loss of time and money on drilling operations. Thus it is necessary to ensure reduction terms of well construction by increasing their quality, a significant reduction in labor and material costs. To solve assigned tasks it is necessary to perform a significant amount of drilling in a variety of geological conditions with high technical and economic indicators by improving technologies of well drilling. Thus great attention has to be paid to improving the stability of the borehole walls in unstable rocks, as one of the factors contributing to the increase of technical and economic indicators of drilling during the development of the great depths in the complicated conditions. Usually try to take into account the effect of the swelling of clay rocks on the course and results of drilling in the design and construction of boreholes, having to use drilling fluids of nondispersive type. Thus it is important to have in advance data of direct experimental evaluations of swelling of drillable rock samples in aqueous media of different component composition. Purpose of the work - to find optimal composition of inhibiting drilling fluid with low content of clay with the usage of polymers of new generation for drilling in easily dispersible clay rocks in deposits of Kazakhstan. [ABSTRACT FROM AUTHOR]
- Published
- 2016
47. Design the Price Signal Mechanism of Suppliers' Cost in the Commercial Procurement Process.
- Author
-
Huang Jinming, Li Wenjing, and Zhu Huazhen
- Subjects
- *
INDUSTRIAL procurement , *SUPPLIERS , *PRICE levels , *CONTRACTS , *COMPUTER simulation - Abstract
In the process of commercial procurement, there exists information asymmetry between purchasers and suppliers in terms of commodity cost. The strike price is what purchasers care about, while the focus of suppliers is only the sales revenue. In order to achieve the relatively lower strike price, purchasers need to design a price signal mechanism, explicating the commodity cost of suppliers. In this article, we have designed a mechanism that purchasers can explicit the commodity cost price based on suppliers' choices by providing a variety of purchase contracts to suppliers. [ABSTRACT FROM AUTHOR]
- Published
- 2016
- Full Text
- View/download PDF
48. INFLUENCE OF OPERATING CONDITIONS TO THE METHOD OF CALCULATING COST PRICES.
- Author
-
Glomazić, Jadranka
- Subjects
BREAK-even analysis ,BUSINESS conditions ,BUSINESS performance measurement ,ACCOUNTING methods ,INDUSTRIAL revolution - Abstract
Copyright of Journal of Accounting & Management is the property of Croatian Accountant and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
- Published
- 2016
49. Determining the cost of apple production by applaying analitical calculation
- Author
-
Mamuza Milorad and Vaško Željko
- Subjects
cost price ,analitical calculation ,apple ,Agriculture (General) ,S1-972 - Abstract
Every agricultural producer is interested in the financial result of its production. For those producers who do not have regular and complete bookkeeping records, this result can be calculated using the analytical accounting calculations. This paper describes the determination of financial results and the cost of apple production on the example of one producer near Prijedor, on the basis of data on conditions and results of its apple production in 2009 on the area of 2 hectares. Calculating the actual costs and revenues was found that the producer on 2 hectares of plantations had a total annual cost of BAM 23.636, total revenues of BAM 45.200 and the profit of BAM 21.564. In addition to recognition if the profit is made and how much it is, every producer from the point of formation of the sales price and sales policy wants to know what is the cost price of his products. In the analyzed case, the cost production price was BAM 0.37 per kg of the first apple class and BAM 0.13 per kg of the second apple class.
- Published
- 2013
- Full Text
- View/download PDF
50. Factor analysis of elements of construction products cost
- Author
-
R. Doszhan, A. Nurmagambetova, and F. Yerdavletova
- Subjects
Quality of work ,cost elements ,HF5601-5689 ,factor analysis ,Marketing. Distribution of products ,HF5410-5417.5 ,Professional staff ,cost management ,Accounting. Bookkeeping ,Documentation ,Economics as a science ,construction products ,HG1-9999 ,Production (economics) ,Relevance (information retrieval) ,Business ,cost price ,HB71-74 ,Industrial organization ,Finance - Abstract
The article deals with the topic of factor analysis of the cost of production and its elements. One of the main conditions for obtaining reliable information about the cost of production is a clear definition of the composition of production costs. The relevance of this topic is due to the fact that at the moment enterprises are forced to pay more attention to the cost of production in the system of indicators that characterize the efficiency of production and sales.The methodological basis of the research was the fundamental research of foreign and Kazakh re-searchers in this field, as well as regulations and statistics of the Republic of Kazakhstan, reporting indi-cators and other documents of the company under study.The main result of this study is to identify the efficiency of production by applying factor analysis. The method of chain substitutions established the cost items, the impact of which was the greatest on the effective indicator – the cost of construction products of the company under study.As a result of the research, recommendations for reducing the cost of production were proposed for the analyzed company. In general, the analyzed company should try to reduce its costs as much as pos-sible. In the course of the factor analysis, ways to reduce the cost of production were proposed.In conclusion, the authors conclude that the demand for specialists in construction today far exceeds the supply on the labor exchange, and as a result, construction companies are forced to settle for low-skilled workers. The lack of professional staff in the industry leads to a number of problems. This includes the absence of estimated documentation for construction projects, low average monthly wages, delays n the delivery of objects, a decrease in the quality of work performed: the presence of a large number of marriages, forced overspending of materials, etc.
- Published
- 2020
Catalog
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.