Search

Rubidium atomic frequency standard (RAFS) is the most widely used frequency standard in space. The light used to pump the atoms and detect the resonance signal is emitted by rubidium spectrum lamp, so the light intensity of rubidium spectrum lamp directly determines the performance of RAFS. This paper discussed on-board RAFS’ output frequency fluctuations caused by rubidium spectrum lamp. The reason of frequency fluctuations from rubidium lamps was described. To obtain stable lamp light intensity, analysis and optimization of the lamp was developed. Relevant experiments were carried out to verify the optimization. The study content of this paper is beneficial to improve the performance of a single temperature controlled space RAFS physics package.

Recent progress are reported on a compact cesium cell atomic frequency standard based on pulsed Coherent Population Trapping interaction in the Dicke regime. Main short term and long term limiting parameters have been identified. Last improvements have permitted to reach a stability of 7×10−13 at 1sec and 2×10−14 at 2000 s. The noise characterization process is presented in this article.

Frequency stability of an atomic frequency standard depends mainly on the Signal to Noise Ratio (SNR) of atomic discrimination signal. For a Rubidium Atomic Frequency Standard (RAFS), the SNR is closely related to the characteristics of the cavity-cell assembly in physics package. The RAFS in our laboratory is designed based on the slotted tube cavity, and a typical stability of 1.5 × 10−12 τ−1/2 (1–1000 s) has been achieved. The current cavity used in our design is of a disadvantage of field inhomogeneity. To improve further the stability of the RAFS, a modification of the cavity has been carried out. With this modification, the field homogeneity has been greatly improved, and the cavity size was increased also, enabling to hold a larger absorption cell. According to a theoretical evaluation, the SNR of physics package was enhanced by nearly two times, meeting the need to design a RAFS with a stability better than 1.0 × 10−12 τ−1/2.

This paper describes the new twin laser-cooled Cs fountain primary frequency standards NIST-F2 and ITCsF2, and presents some of their design features. Most significant is a cryogenic microwave interrogation region which dramatically reduces the blackbody radiation shift. We also present a preliminary accuracy evaluation of IT-CsF2.

Reported is the original implementation of a microcell (1 mm 3 ) in which a stable cesium vapour is generated after the cell is sealed. This new type of microcell is suitable for chip scale atomic clocks (CSACs) and can be realised at the industrial scale in an economic way

The high C-field Cs beam frequency standard is presently a working machine which is undergoing first accuracy evaluations. The projected 10/sup -14/ accuracy goal is as yet unattained mainly because of inadequate C-field uniformity and stability. An analysis of the projected possible C-field improvements and the consequent uncertainty is here reported.

This paper reports on the design and evaluation of a high-stability current control developed for energizing the C-field magnet of the high-field cesium standard experiment, currently in progress at the Politecnico di Torino. This source must supply about 0.8 kW dc power with a current stability in the 10^-7 range up to more than one hour.

Cesium atomic frequency standard is under development at the Politecnico di Torino. The whole resonator is conceived to reduce a number of systematic effects which are difficult to evaluate at the 10/sup -14/ accuracy level in traditional schemes. Some new solutions such as C-field value, cylindrical microwave cavity design and state selection method have been introduced in order to meet this goal. The overall design guidelines and the first results are reported and discussed.

Microwave cavities, or microwave resonators, are used in a variety of applications, including filters, oscillators, frequency meters, and tuned amplifiers. The ever-increasing demand for compact and/or portable telecommunication systems drives the need for further miniaturization of such structures for improved integration. In this thesis, new miniature microwave cavity solutions are proposed, which are useful in at least two scopes of application. In the first scope, the new devices are used as microwave front-ends of a short-range radar system for on-line blade tip monitoring in gas turbines (i.e. land-based large-frame turbines, aero-derivatives and aero-engines). In general, microwave sensors are advantageous for blade tip sensing: contrary to other existing techniques, they can survive to high temperatures for extended period of operation, unaffected by contaminants, like gases and dirt. Nonetheless, the microwave front-end of such systems is of difficult implementation, due to the strict thermal-mechanical constraints of the specific field of application (i.e. a large temperature change, the presence of vibrations, dirt and combustion by-products) and the tight requirements on the size of candidate probe designs. Antenna-based solutions are currently used as tip monitoring probes, with the disadvantage of being complex structures with radiation characteristics that are not entirely well suited for short range sensing. As a valid alternative, we propose two cavity-based probe solutions, namely a miniature waveguide resonator probe and a coaxial resonator probe, which represent an elegant compromise between robustness, miniaturization and simplicity of operation. Tests in laboratory and on real turbine engines demonstrated the suitability of such devices for the aimed application and several improved characteristics with respect to other comparable techniques, like antenna-based and eddy-current sensors. In the second scope, the new proposed solutions are used as microwave resonators in miniature rubidium atomic clocks. Attempts to miniaturize such kind of systems are usually limited by the dimensional constraints of standard microwave cavity resonators (MWR) , which account for a large part of the volume of the physics package. We propose a new miniature MWR based on a loop-gap resonator structure, also referred to as the μ-LGR. This cavity design meets the desired field configuration for the atomic clock operation and achieves an interesting size-reduction. A laboratory experiment of an atomic clock integrating the μ-LGR achieved unmatched results of stability compared to other microcell clocks. Finally, we propose a miniature planar MWR for the integration of 2D microfabricated cells.