Search

At ultra-high field MRI (Bo>7T) it is crucial to predict and control the patient safety. Commonly patient safety is controlled by the power deposited in the tissue (specific absorption rate - SAR). However, temperature distributions do not always correlate directly with SAR distributions, which makes temperature control also a crucial parameter to guarantee patient safety. In this work, temperature changes were accessed by MR thermometry, specifically by the proton resonance frequency shift technique (PRF). A phantom mimicking muscle tissue was used to evaluate the temperature rise caused by the radiofrequency (RF) absorption during 7T MRI, applied through a commercial birdcage head coil. A pulse-sequence protocol was implemented for both, the generation of temperature increase and the MR thermometry. To control the temperature, a digital thermometer was used, and oil tubes were utilized to dismiss the drift effects for PRF. Measurements of the phantom’s dielectric characteristics, i.e. conductivity and permittivity, were in good agreement with the literature values for muscle. Spatio-temporal evaluations showed a temperature increase in time via RF exposure and the feasibility of measuring temperature maps using the PRF shift method. The accuracy of the PRF shift method increased when the drift effects were quantified and dismissed, indicating a PRF reading accuracy differing less than 0.5 °C from the thermometer. Results also validate our heating and temperature imaging protocol. This study is a valuable contribution to the evaluation of heating effects caused by RF absorption and demonstrates potential impact on future thermal investigations, which may use different heating sources, as well validate thermal simulations.

We report on the development of a bioreactor system for mechanical stimulation of musculoskeletal tissues. The ultimate object is to improve the quality of medical treatment following injuries of the enthesis tissue. To this end, the tissue formation process through the effect of mechanical stimulation is investigated. A six-well system was designed, 3D printed and tested. An integrated actuator creates strain by applying a force. A contactless position sensor monitors the travels. An electronic circuit controls the bioreactor using a microcontroller. An IoT platform connects the microcontroller to a smartphone, enabling the user to alter variables, trigger actions and monitor the system. The system was stabilised by implementing two PID controllers and safety measures. The results show that the bioreactor design is suited to execute mechanical stimulation and to investigate the tissue formation and regeneration process. The bioreactor reported here can now be implemented in tissue engineering applications including tissue specimen.

In computed tomography (CT) materials with high-atomic number Z cause image artefacts, thus, errors in CT numbers given in Hounsfield Units (HU). Also, the conventional HU scale (CHU) implemented in CT scanners is truncated, i.e., it does not cover high-Z materials. These restrictions lead to incorrect mapping of CT numbers to electron density, which are used in radiotherapy (RT) treatment planning systems (TPS). Even analytical conversion methods are only permissible for tissue-equivalent materials. In terms of HU-to-density conversion in RT TPS, we investigated the CT numbers of material mixtures up to Z

In the framework of the IMEGIN Large Program, we used the NIKA2 camera on the IRAM 30-m telescope to observe the edge-on galaxy NGC 891 at 1.15 mm and 2 mm and at a FWHM of 11.1” and 17.6”, respectively. Multiwavelength data enriched with the new NIKA2 observations fitted by the HerBIE SED code (coupled with the THEMIS dust model) were used to constrain the physical properties of the ISM. Emission originating from the diffuse dust disk is detected at all wavelengths from mid-IR to mm. while mid-lR observations reveal warm dust emission from compact H II regions. Indications of mm excess emission have also been found in the outer parts of the galactic disk. Furthermore, our SED fitting analysis constrained the mass fraction of the small (< 15 Å) dust grains. We found that small grains constitute 9.5% of the total dust mass in the galactic plane, but this fraction increases up to ~ 20% at large distances (|z| > 3 kpc) from the galactic plane.

Dusty starless cores play an important role in regulating the initial phases of the formation of stars and planets. In their interiors, dust grains coagulate and ice mantles form, thereby changing the millimeter emissivities and hence the ability to cool. We mapped four regions with more than a dozen cores in the nearby Galactic filaments of Taurus and Perseus using the NIKA2 camera at the IRAM 30-meter telescope. Combining the 1mm to 2mm flux ratio maps with dust temperature maps from Herschel allowed to create maps of the dust emissivity index β1,2 at resolutions of 2430 and 5600 a.u. in Taurus and Perseus, respectively. Here, we study the variation with total column densities and environment. β1,2 values at the core centers (Av =12 – 19 mag) vary significantly between ~ 1.1 and 2.3. Several cores show a strong rise of β1,2 from the outskirts at ~ 4 mag to the peaks of optical extinctions, consistent with the predictions of grain models and the gradual build-up of ice mantles on coagulated grains in the dense interiors of starless cores.

Three galaxy clusters selected from the XXL X-ray survey at high redshift and low mass (z ~ 1 and M500 ~ 1 – 2 × 1014 M⊙) were observed with NIKA2 to image their Sunyaev-Zel'dovich effect (SZ) signal. They all present an SZ morphology, together with the comparison with X-ray and optical data, that indicates dynamical activity related to merging events. Despite their disturbed intracluster medium, their high redshifts, and their low masses, the three clusters follow remarkably well the pressure profile and the SZ flux-mass relation expected from standard evolution. This suggests that the physics that drives cluster formation is already in place at z ~ 1 down to M500 ~ 1014 M⊙.

This study presents the first millimeter continuum mapping observations of two nearby galaxies, the starburst spiral galaxy NGC2146 and the dwarf galaxy NGC2976, at 1.15 mm and 2 mm using the NIKA2 camera on the IRAM 30m telescope, as part of the Guaranteed Time Large Project IMEGIN. These observations provide robust resolved information about the physical properties of dust in nearby galaxies by constraining their FIR-radio SED in the millimeter domain. After subtracting the contribution from the CO line emission, the SEDs are modeled spatially using a Bayesian approach. Maps of dust mass surface density, temperature, emissivity index, and thermal radio component of the galaxies are presented, allowing for a study of the relations between the dust properties and star formation activity (using observations at 24μm as a tracer). We report that dust temperature is correlated with star formation rate in both galaxies. The effect of star formation activity on dust temperature is stronger in NGC2976, an indication of the thinner interstellar medium of dwarf galaxies. Moreover, an anti-correlation trend is reported between the dust emissivity index and temperature in both galaxies.

To understand the evolution of dust properties in molecular clouds in the course of the star formation process, we constrain the changes in the dust emissivity index from star-forming filaments to prestellar and protostellar cores to T Tauri stars. Using the NIKA2 continuum camera on the IRAM 30 m telescope. we observed the Taurus B211/B2I3 filament at 1.2 mm and 2 mm with unprecedented sensitivity and used the resulting maps to derive the dust emissivity index β. Our sample of 105 objects detected in the β map of the B211/B213 filament indicates that, overal. β decreases from filament and prestellar cores (β ~ 2 ± 0.5) to protostellar cores (β ~ 1.2 ± 0.2) to T-Tauri protoplanetary disk (β < I). The averaged dust emissivity index β across the B211/B2I3 filament exhibits a flat (β ~ 2 ± 0.3) profile. This may imply that dust grain sizes are rather homogeneous in the filament, start to grow significantly in size only after the onset of the gravitational contraction/collapse of prestellar cores to protostars, reaching big sizes in T Tauri protoplanetary disks. This evolution from the parent filament to T-Tauri disks happens on a timescale of about 1-2 Myr.

We present the first preliminary results of the project ICED, focusing on the face-on galaxy NGC4254. We use the millimetre maps observed with NIKA2 at lRAM-30m. as part of the IMEGIN Guaranteed Time Large Program. and of a wide collection of ancillary data (multi-wavelength photometry and gas phase spectral lines) that are publicly available. We derive the global and local properties of interstellar dust grains through infrared-to-radio spectral energy distribution fitting, using the hierarchical Bayesian code HerBIE. which includes the grain properties of the state-of-the-art dust model. THEMIS. Our method allows us to get the following dust parameters: dust mass, average interstellar radiation field, and fraction of small grains. Also, it is effective in retrieving the intrinsic correlations between dust parameters and interstellar medium properties. We find an evident anti-correlation between the interstellar radiation field and the fraction of small grains in the centre of NGC4254. meaning that, at strong radiation field intensities, very small amorphous carbon grains are efficiently destroyed by the ultra-violet photons coming from newly formed stars, through photo-desorption and sublimation. We observe a flattening of the anti-correlation at larger radial distances, which may be driven by the steep metallicity gradient measured in NGC4254.

We present a morphological analysis of a set of spiral galaxies from the NIKA2 Guaranteed Time Large Program, IMEGIN. We have fitted a single Sérsic model on a set of broadband images, from ultra-violet (UV) to millimeter (mm) wavelengths, using the modelling code Statmorph. With the recently acquired NIKA2 1.15- and 2-mm observations, it is possible to extend such a morphological analysis to the mm regime and investigate the two-dimensional (2D) distribution (exponential, Gaussian) of the very cold dust (

Cone-Beam computed tomography (CBCT) has become the most important component of modern radiotherapy for positioning tumor patients directly before treatment. In this work we investigate alternations to standard acquisition protocol, called preset, for patients with a tumor in the thoracic region. The effects of the changed acquisition parameters on the image quality are evaluated using the Catphan Phantom and the image analysis software Smári. The weighted CT dose index (CTDIW) is determined in each case and the effects of the different acquisition protocols on the patient dose are classified accordingly. Additionally, the clinical suitability of alternative presets is tested by investigating correctness of image registration using the CIRS thorax phantom. The results show that a significant dose reduction can be achieved. It can be reduced by 51% for a full rotation by adjusting the gantry speed. A more patientspecific uptake protocol for patients with laterally located tumor was created which allows a dose reduction of 54%.

Dipole radiofrequency (RF) elements have been successfully used to compose multi-channel RF coils for ultrahigh fields (UHF) magnetic resonance imaging (MRI). As magnetic components of RF fields (B1) can be very inhomogeneous at UHF (B0≥7T), dielectric pads with high dielectric constants were proposed to improve the B1 efficiency and homogeneity [1]. Dielectric pads can be used as a passive B1 shimmimg technique thanks to inducing a strong secondary magnetic field in their vicinity. The use of such dielectric pads affect not only the B1 field but also the electric field. This in turn affects the specific absorption rate (SAR) and consequently the temperature distribution inside the patient’s body. To study these effects, a 29 cm-long transmission dipole RF coil element terminated by two meander was used for 7T MRI [2]. Using a cylindrical agarose-gel phantom, numerical and experimental results were analyzed with respect to homogeneity and amplitude of the magnetic and electric fields generated by the RF element in various configurations with and without dielectric pads. Calculated and measured B1 results were cross-checked and found to be in good agreement. When using dielectric pads B1 homogeneity and magnitude increase in regions where it was previously weak or insufficient. Calculations suggest that SAR distribution will change when using the pads.

Nowadays, patients with metallic implants undergoing radiotherapy may suffer from inaccuracy in the treatment plan caused by the implant. To ensure a precise plan an accurate relation between Hounsfield values of the computer tomographic (CT) images and the electron density of the elements and material mixtures is indispensable. In order to extend the stoichiometric calibration approach known for tissues to the regime of metallic materials, the basic physical equations as well as approximations in the parametrization and fitting are carefully reviewed. CT images of a standard calibration phantom and pure metallic samples up to the atomic number Z = 29 were acquired for various energies. Hounsfield values were determined on an extended Hounsfield scale which allows the mapping of material having high atomic number Z. It is found that from basic physics an empirical factorization of the cross-sections into a function of Z and a function of photon energy E is not allowed over a wide range of Z. Specifically, the parameterization for tissue like materials cannot be prolonged to materials with high-Z. Thus, the calibration is subdivided into regions of materials and its accuracy is quantified in each region. It depends, among others, on the knowledge of the X-ray photon spectra, the segmentation of the material samples and the empirical parameterization of the linear-attenuation coefficient.

We investigate the suitability of statistical and model-based iterative reconstruction (IR) algorithm strengths and their influence on image quality and diagnostic performance in low-dose computer tomography (CT) protocols for lung-cancer screening procedures. We evaluate the inter- and intra-observer performance for the assessment of iterative CT reconstruction. Artificial lung foci shaped as spheres and spicules made from material with calibrated Hounsfield units were pressed within layered granules in lung lobes of an anthropomorphic phantom. Adaptively, a soft-tissue- and fat- extension ring were attached. The phantom with foci was scanned using standard high contrast, low-dose and ultra lowdose protocols. For reconstruction the IR algorithm ADMIRE at four different strength levels were used. Two ranking tests and Friedman statistics were performed. Fleiss k and modified Cohen’s kneywere used to quantify inter- and intra-observer performance. In conjunction with the standard lung kernel BL75 radiologists evaluated medium to high IR strength, with preference to S4, as suitable for lung foci detection. When varying reconstruction kernels the ranking became more random than with varying phantom diameter. The inter-observer reliability shows poor to slight agreement expressed by k0.90 for the second ranking test was observed. In conclusion, our validation suggests radiological preference of medium to high iteration strengths, especially S4, for lung foci detection. An investigation of the correlation between diagnostic experience and the subjective perception of IR reconstructed CT images still needs to be investigated.

In this research computer tomography (CT) iterative reconstruction (IR) algorithms are investigated, specifically the impact of their statistical and model-based strength on image quality in low-dose lung screening CT protocols in comparison to filtered back projection (FBP). It has been probed whether statistical, model-based IR in conjunction with low-dose, and ultra-low-dose protocols are suitable for lungcancer screening. To this end, artificial lung nodules shaped as spheres and spicules made from material with calibrated Hounsfield units (HU) were attached on marked positions in the lung structure of an anthropomorphic phantom. Nodule positions were selected by distinguished radiologists. The phantom with nodules was scanned on a CT Scanner using standard high contrast (SHC), low-dose (LD) and ultra low-dose (ULD) protocol. For reconstruction FBP and the IR algorithm ADMIRE at three different strength levels were used. Volume CT dose index (CTDIvol) and dose-length product were recorded. Radiologists assessed subjective image quality using a six-point Likert scale by reading all image series in terms detectability of lung nodules. As a measurable objective image quality parameter signal-to-noise ratios (SNR) were investigated. The CTDIvol decreases by more than 70% for all protocols and nodules compared to diagnostic reference value for chest CT (p

The purpose of this work was to develop and investigate a radiofrequency (RF) coil to perform image studies on small animals using the 7T magnetic resonance imaging (MRI) system, installed in the imaging platform in the autopsy room (Portuguese acronym PISA), at the University of Sao Paulo, Brazil, which is the unique 7T MRI scanner installed in South America. Due to a high demand to create new specific coils for this 7T system, it is necessary to carefully assess the distribution of electromagnetic (EM) fields generated by the coils and evaluate the patient/object safety during MRI procedures. To achieve this goal 3D numerical methods were used to design and analyse a 8-rungs transmit/receive linearly driven birdcage coil for small animals. Calculated magnetic field (B1) distributions generated by the coil were crosschecked with measured results, indicating good confidence in the simulated results. Electric field results were post-processed and predictions of local specific absorption rate (SAR) values were achieved for a spherical phantom filled with muscle-like tissue, indicating that the sample would not suffer any unsafe deposition of energy. Post mortem abdomen images obtained from a rat presented good image quality and no artifacts related to field non-homogeneity were observed.

In this paper, the effect of computed tomography (CT) values of metals in 12-bit and 16-bit extended Hounsfield Unit (EHU) scale on dose calculations in radiotherapy treatment planning systems (TPS) were quantified. Dose simulations for metals in water environment were performed with the software PRIMO in 6MV photon mode. The depth dose profiles were analysed and the relative dose differences between the metals determined with 12-bit and 16-bit CT imaging, respectively, were calculated. Maximum dose differences of ΔAl = 3.0%, ΔTi = 4.5%, ΔCr = 6.2% and ΔCu = 11.6% were measured. In order to increase the accuracy of dose calculation on patients with implants, CT imaging in the EHU scale is recommended.

New observations of the edge-on galaxy NGC 891, at 1.15 and 2mm obtained with the IRAM 30-m telescope and the NIKA2 camera, within the framework of the IMEGIN (Interpreting the Millimetre Emission of Galaxies with IRAM and NIKA2) Large Program, are presented in this work. By using multiwavelength maps (from the mid-IR to the cm wavelengths) we perform SED fitting in order to extract the physical properties of the galaxy on both global and local (~kpc) scales. For the interpretation of the observations we make use of a state-of-the-art SED fitting code, HerBIE (HiERarchical Bayesian Inference for dust Emission). The observations indicate a galaxy morphology, at mm wavelengths, similar to that of the cold dust emission traced by submm observations and to that of the molecular gas. The contribution of the radio emission at the NIKA2 bands is very small (negligible at 1.15 mm and ~ 10% at 2 mm) while it dominates the total energy budget at longer wavelengths (beyond 5 mm). On local scales, the distribution of the free-free emission resembles that of the dust thermal emission while the distribution of the synchrotron emission shows a deficiency along the major axis of the disc of the galaxy.

As the possible progenitors of passive galaxies at z=2-3, dusty starforming galaxies (DSFGs) at z>4 provide a unique perspective to study the formation, assembly, and early quenching of massive galaxies in the early Universe. The extreme obscuration in optical-IR makes (sub)mm spectral scans the most universal and unbiased way to confirm/exclude the high-z nature of candidate dusty star-forming galaxies. We present here the status of the NIKA2 Cosmological Legacy Survey (N2CLS), which is the deepest wide-area singledish survey in the millimeter searching for high-z DSFGs. We also introduce a joint-analysis method to effciently search for the spectroscopic redshift of high-z DSFGs with noisy spectra and photometric data and present its success in identifying the redshift of DSFGs found in NIKA2 science verification data.

High-mass stars (m* ≳ 8 M⊙) play a crucial role in the evolution of galaxies, and so it is imperative that we understand how they are formed. We have used the New IRAM KIDs Array 2 (NIKA2) camera on the Institut de Radio Astronomie Millimétrique (IRAM) 30-m telescope to conduct high-sensitivity continuum mapping of ~ 2 deg2 of the Galactic plane (GP) as part of the Galactic Star Formation with NIKA2 (GASTON) large program. We have identified a total of 1467 clumps within our deep 1.15 mm continuum maps and, by using overlapping continuum, molecular line, and maser parallax data, we have determined their distances and physical properties. By placing them upon an approximate evolutionary sequence based upon 8 μm Spitzer imaging, we find evidence that the most massive dense clumps accrete material from their surrounding environment during their early evolution, before dispersing as star formation advances, supporting clump-fed models of high-mass star formation.

Using the NIKA2 dual band millimeter camera installed on the IRAM30m telescope, we have mapped a relatively large field (~ 70 arcmin2) in the direction of the star GJ526 to investigate the nature of the sources found with the MAMBO camera at 1.2 mm ten years earlier. We have found that they must be dust-obscured galaxies (SMGs) in the background beyond the star. The new NIKA2 map at 1.15 mm reveals additional sources and, in fact, an overdensity of SMGs predominantly distributed along a filament-like structure in projection on the sky across the whole observed field. We speculate this might be a cosmic filament at high redshift as revealed in cosmological hydrodynamical simulations. Measurement of spectroscopic redshifts of the SMGs in the candidate filament is required now for a definitive confirmation of the nature of the structure.

We present preliminary results from an on-going program that aims at mapping the intracluster medium (ICM) temperature of high redshift galaxy clusters from the MaDCoWS sample using a joint analysis of shallow X-ray data obtained by Chandra and high angular resolution Sunyaev-Zel’dovich (SZ) observations realized with the NIKA2 and MUSTANG-2 cameras. We also present preliminary results from an on-going Open Time program within the NIKA2 collaboration that aims at mapping the ICM temperature of a galaxy cluster at z = 0.45 from the resolved detection of the relativistic corrections to the SZ spectrum. These studies demonstrate how high angular resolution SZ observations will play a major role in the coming decade to push the investigation of ICM dynamics and non-gravitational processes to high redshift before the next generation X-ray observatories come into play.

Dust polarization observations are a powerful, practical tool to probe the geometry (and to some extent, the strength) of magnetic fields in starforming regions. In particular, Planck polarization data have revealed the importance of magnetic fields on large scales in molecular clouds. However, due to insufficient resolution, Planck observations are unable to constrain the B-field geometry on prestellar and protostellar scales. The high angular resolution of 11.7 arcsec provided by NIKA2-Pol 1.15 mm polarimetric imaging, corresponding to 0.02 pc at the distance of the Orion molecular cloud (OMC), makes it possible to advance our understanding of the B-field morphology in star-forming filaments and dense cores (IRAM 30m large program B-FUN). The commissioning of the NIKA2-Pol instrument has led to several challenging issues, in particular, the instrumental polarization or intensity-to-polarization “leakage” effect. In the present paper, we illustrate how this effect can be corrected for, leading to reliable exploitable data in a structured, extended source such as OMC-1. We present a statistical comparison between NIKA2-Pol and SCUBA2-Pol2 results in the OMC-1 region. We also present tentative evidence of local pinching of the B-field lines near Orion-KL, in the form of a new small-scale hourglass pattern, in addition to the larger-scale hourglass already seen by other instruments such as Pol2.

In the past decade filaments have been recognised as a major structural element of the interstellar medium, the densest of these filaments hosting the formation of most stars. In some star-forming molecular clouds converging networks of filaments, also known as hub filament systems, can be found. These hubs are believed to be preferentially associated to massive star formation. As of today, there are no metrics that allow the systematic quantification of a filament network convergence. Here, we used the IRAM 30m NIKA2 observations of the Galactic plane from the GASTON large programme to systematically identify filaments and produce a filament convergence parameter map. We use such a map to show that: i. hub filaments represent a small fraction of the global filament population; ii. hubs host, in proportion, more massive and more luminous compact sources that non-hubs; iii. hub-hosting clumps are more evolved that non-hubs; iv. no discontinuities are observed in the properties of compact sources as a function of convergence parameter. We propose that the rapid global collapse of clumps is responsible for (re)organising filament networks into hubs and, in parallel, enhancing the mass growth of compact sources.

The quest for primordial gravitational waves enclosed in the Cosmic Microwave Background (CMB) polarization B-modes signal motivates the development of a new generation of high sensitive experiments (e.g. CMBS4, LiteBIRD), thus allowing to probe the inflationary epoch in the early Universe. However, this will be only possible by ensuring a high control of the instrumental systematic effects and an accurate absolute calibration of the polarization angle. The Crab nebula is known to be a polarization calibrator on the sky for CMB experiments. Already used for the Planck satellite it exhibits a high polarized signal at microwave wavelengths. In this work we present Crab polarization observations obtained, in the 260 GHz frequency band, with the NIKA2 instrument. Furthermore, we discuss the accuracy needed on such a measurement to improve the constraints on the absolute angle calibration for CMB experiments.

Interstellar dust plays an important role in the formation of molecular gas and the heating and cooling of the interstellar medium. The spatial distribution of the mm-wavelength dust emission from galaxies is largely unexplored. The NIKA2 Guaranteed Time Project IMEGIN (Interpreting the Millimeter Emission of Galaxies with IRAM and NIKA2) has recently mapped the mm emission in the grand design spiral galaxy NGC6946. By subtracting the contributions from the free-free, synchrotron, and CO line emission, we map the distribution of the pure dust emission at 1:15mm and 2mm. Separating the arm/interarm regions, we find a dominant 2mm emission from interarms indicating the significant role of the general interstellar radiation field in heating the cold dust. Finally, we present maps of the dust mass, temperature, and emissivity index using the Bayesian MCMC modeling of the spectral energy distribution in NGC6946.

We report on investigations that illustrate the interaction between the specific immune system and a young avascular tumor growing due to a diffusive nutrient supply. We formulate a hybrid cellular automata-partial differential equation (CA-PDE) model which includes cell cycle dynamics and allows for tracking the spatial and temporal evolution of this elaborate biological system. We present results of two dimensional numerical simulations that, specifically in this work, include special cases of the spherical and papillary tumor growth, the infiltration of immune system cells into the tumor and the escape of tumor cells from the regime of the immune cells.

This study investigates differences between treatment plans generated by Ray Tracing (RT) and Monte Carlo (MC) calculation algorithms in homogeneous and heterogeneous body regions. Particularly, we focus on the head and on the thorax, respectively, for robotic stereotactic radiotherapy and radiosurgery with Cyberknife. Radiation plans for tumors located in the head and in the thorax region have been calculated and compared to each other in 47 cases and several tumor types.

The paper describes experiences in the modeling of complex geometry CLC equipment. The facility consists of two reactors: the air reactor and the fuel reactor. The fuzzy logic (FL) methods are used in the study for the prediction of NOx and SO2 from the solid fuels combustion in CLC equipment. Maximum errors between measured and predicted results are lower than 10 %.

Metallic implants in magnetic resonance imaging (MRI) are a potential safety risk since the energy absorption may increase temperature of the surrounding tissue. The temperature rise is highly dependent on implant size. Numerical examinations can be used to calculate the energy absorption in terms of the specific absorption rate (SAR) induced by MRI on orthopaedic implants. This research presents the impact of titanium osteosynthesis spine implants, called spondylodesis, deduced by numerical examinations of energy absorption in simplified spondylodesis models placed in 1.5 T and 3.0 T MRI body coils. The implants are modelled along with a spine model consisting of vertebrae and disci intervertebrales thus extending previous investigations [1], [2]. Increased SAR values are observed at the ends of long implants, while at the center SAR is significantly lower. Sufficiently short implants show increased SAR along the complete length of the implant. A careful data analysis reveals that the particular anatomy, i.e. vertebrae and disci intervertebrales, has a significant effect on SAR. On top of SAR profile due to the implant length, considerable SAR variations at small scale are observed, e.g. SAR values at vertebra are higher than at disc positions.

High-resolution mapping of the hot gas in galaxy clusters is a key tool for cluster-based cosmological analyses. Taking advantage of the NIKA2 millimeter camera operated at the IRAM 30-m telescope, the NIKA2 SZ Large Program seeks to get a high-resolution follow-up of 45 galaxy clusters covering a wide mass range at high redshift in order to re-calibrate some of the tools needed for the cosmological exploitation of SZ surveys. We present the second cluster analysis of this program, targeting one of the faintest sources of the sample in order to tackle the difficulties in data reduction for such faint, low-SNR clusters. In this study, the main challenge is the precise estimation of the contamination by sub-millimetric point sources, which greatly affects the tSZ map of the cluster. We account for this contamination by performing a joint fit of the SZ signal and of the flux density of the compact sources. A prior knowledge of these fluxes is given by the adjustment of the SED of each source using data from both NIKA2 and the Herschel satellite. The first results are very promising and demonstrate the possibility to estimate thermodynamic properties with NIKA2, even in a compact cluster heavily contaminated by point sources.

The main limiting factor of cosmological analyses based on thermal Sunyaev-Zel’dovich (SZ) cluster statistics comes from the bias and systematic uncertainties that affect the estimates of the mass of galaxy clusters. High-angular resolution SZ observations at high redshift are needed to study a potential redshift or morphology dependence of both the mean pressure profile and of the mass-observable scaling relation used in SZ cosmological analyses. The NIKA2 camera is a new generation continuum instrument installed at the IRAM 30-m telescope. With a large field of view, a high angular resolution and a high-sensitivity, the NIKA2 camera has unique SZ mapping capabilities. In this paper, we present the NIKA2 SZ large program, aiming at observing a large sample of clusters at redshifts between 0.5 and 0.9, and the characterization of the first cluster oberved with NIKA2.

Clarifying the role of magnetic fields in the star formation process is crucial. Observations have already shown that magnetic fields play an important role in the early stages of star formation. The high spatial resolution (∼0.01 to 0.05 pc) provided by NIKA2-Pol 1.2 mm imaging polarimetry of nearby clouds will help us clarify the geometry of the B-field within dense cores and molecular filaments as part of the IRAM 30m large program B-FUN. There are numerous challenging issues in the validation of NIKA2-Pol such as the calibration of instrumental polarization. The commissioning phase of NIKA2-Pol is underway and is helping us characterize the intensity-to-polarization “leakage” pattern of the instrument. We present a preliminary analysis of the leakage pattern and its dependence with elevation. We also present the current leakage correction made possible by the NIKA2 pipeline in polarization mode based on the NIKA2-Pol commissioning data taken in December 2018. Based on reduced Stokes I, Q, U data we find that the leakage pattern of NIKA2-Pol depends on elevation and is sensitive to the focus of the telescope.

The steps taken to tailor to NIKA2 observations the Scanamorphos algorithm (initially developed to subtract low-frequency noise from Herschel on-the-fly observations) are described, focussing on the consequences of the different instrument architecture and observation strategy. The method, making the most extensive use of the redundancy built in the multi-scan coverage with large arrays of a given region of the sky, is applicable to extended sources, while the pipeline is so far optimized for compact sources. An example of application is given. A related tool to build consistent broadband SEDs from 60 microns to 2 mm, combining Herschel and NIKA2 data, has also been developed. Its main task is to process the data least affected by low-frequency noise and coverage limitations (i.e. the Herschel data) through the same transfer function as the NIKA2 data, simulating the same scan geometry and applying the same noise and atmospheric signal as extracted from the 1mm and 2mm data.

The NIKA2 polarization channel at 260 GHz (1.15 mm) has been proposed primarily to observe galactic star-forming regions and probe the critical scales between 0.01-0.05 pc at which magnetic field lines may channel the matter of interstellar filaments into growing dense cores. The NIKA2 polarime-ter consists of a room temperature continuously rotating multi-mesh HWP and a cold polarizer that separates the two orthogonal polarizations onto two 260 GHz KIDs arrays. We describe in this paper the preliminary results obtained during the most recent commissioning campaign performed in December 2018. We concentrate here on the analysis of the extended sources, while the observation of compact sources is presented in a companion paper [12]. We present preliminary NIKA2 polarization maps of the Crab nebula. We find that the integrated polarization intensity flux measured by NIKA2 is consistent with expectations. In terms of polarization angle, we are still limited by systematic uncertainties that will be further investigated in the forthcoming commissioning campaigns.

Clusters of galaxies, the largest bound objects in the Universe, constitute a cosmological probe of choice, which is sensitive to both dark matter and dark energy. Within this framework, the Sunyaev-Zel’dovich (SZ) effect has opened a new window for the detection of clusters of galaxies and for the characterization of their physical properties such as mass, pressure and temperature. NIKA, a KID-based dual band camera installed at the IRAM 30-m telescope, was particularly well adapted in terms of frequency, angular resolution, field-of-view and sensitivity, for the mapping of the thermal and kinetic SZ effect in high-redshift clusters. In this paper, we present the NIKA cluster sample and a review of the main results obtained via the measurement of the SZ effect on those clusters: reconstruction of the cluster radial pressure profile, mass, temperature and velocity.

We present the results of the analysis of the very massive cluster MOO J1142+1527 at a redshift z = 1.2 based on high angular resolution NIKA2 Sunyaev-Zel’dovich (SZ) and Chandra X-ray data. This multi-wavelength analysis enables us to estimate the shape of the temperature profile with unprecedented precision at this redshift and to obtain a map of the gas entropy distribution averaged along the line of sight. The comparison between the cluster morphological properties observed in the NIKA2 and Chandra maps together with the analysis of the entropy map allows us to conclude that MOOJ1142+1527 is an on-going merger hosting a cool-core at the position of the X-ray peak. This work demonstrates how the addition of spatially-resolved SZ observations to low signal-to-noise X-ray data can bring valuable insights on the intracluster medium thermodynamic properties at z > 1.

The new NIKA2 camera at the IRAM 30m radiotelescope was used to observe three known debris disks in order to constrain the SED of their dust emission in the millimeter wavelength domain. We have found that the spectral index between the two NIKA2 bands (1mm and 2mm) is consistent with the Rayleigh-Jeans regime (λ-2), unlike the steeper spectra (λ-3) measured in the submillimeter-wavelength domain for two of the three disks - around the stars Vega and HD107146. We provide a succesful proof of concept to model this spectral inversion in using two populations of dust grains, those smaller and those larger than a grain radius a0 of 0.5mm. This is obtained in breaking the slope of the size distribution and the functional form of the absorption coefficient of the standard model. The third disk - around the star HR8799 - does not exhibit this spectral inversion but is also the youngest.

Dust grains are the building blocks of future planets. They evolve in size, shape and composition during the life cycle of the interstellar medium. We seek to understand the process which leads from diffuse medium grains to dust grains in the vicinity of protostars inside disks. As a first step, we propose to characterize the dust evolution inside pre-stellar cores thanks to multi-wavelength observations. We will present how NIKA2 maps are crucial to better constrain dust properties and we will introduce SIGMA: a new flexible dust model in open access.

We present here the polarization system of the NIKA camera and give a summary of the main results obtained and performed studies on Orion and the Crab nebula. The polarization system was equipped with a room temperature continuously rotating multi-mesh half wave plate and a grid polarizer facing the NIKA cryostat window. NIKA even though less sensitive than NIKA2 had polarization capability in both 1 and 2 millimiter bands. NIKA polarization observations demonstrated the ability of such a technology in detecting the polarization of different targets, compact and extended sources like the Crab nebula and Orion Molecular Cloud region OMC-1. These measurements together with the developed techniques to deal with systematics, opened the way to the current observations of NIKA2 in polarization that will provide important advances in the studies of galactic and extra-galactic emission and magnetic fields.

Understanding where and when the mass of stars is determined is one of the fundamental, mostly unsolved, questions in astronomy. Here, we present the first results of GASTON, the Galactic Star Formation with NIKA2 large programme on the IRAM 30m telescope, that aims to identify new populations of low-brightness sources to tackle the question of stellar mass determination across all masses. In this paper, we focus on the high-mass star formation part of the project, for which we map a ~ 2 deg2 region of the Galactic plane around l = 24° in both 1.2 mm and 2.0 mm continuum. Half-way through the project, we reach a sensitivity of 3.7 mJy/beam at 1.2mm. Even though larger than our target sensitivity of 2 mJy, the current sensitivity already allows the identification of a new population of cold, compact sources that remained undetected in any (sub-)mm Galactic plane survey so far. In fact, about 25% of the ~ 1600 compact sources identified in the 1.2mm GASTON image are new detections. We present a preliminary analysis of the physical properties of the GASTON sources as a function of their evolutionary stage, arguing for a potential evolution of the mass distribution of these sources with time.

An innovative idea, shown in the paper constitutes in the use of the fluidized bed of sorbent, instead of the conventional, fixed-bed, commonly used in the adsorption chillers. Bed–to–wall heat transfer coefficients for fixed and fluidized beds of adsorbent are determined. Sorbent particles diameters and velocities of fluidizing gas are discussed in the study. The calculations confirmed, that the bed–to–wall heat transfer coefficient in the fluidized bed of adsorbent is muchhigher than that in a conventional bed.

Adsorption chillers can be a promising part of sustainable development concept of the global economy due to the utilization of low grade thermal energy sources for cooling production. Therefore, research aiming at improving their performance i.e. Coefficient of Performance (COP) by optimizing the heat and mass transfer condition in the adsorption beds are crucial. Innovative modification of the sorbent layer structure are proposed in the paper in order to improve the heat transfer characteristics in the heat exchanger boundary layer. The analysis of desorption conditions in the parametric model of a coated adsorption bed construction is presented in the paper. The computational fluid dynamics with conjugate heat transfer analysis are used to determine the crucial input parameters for further analytical calculations. The heat transfer condition in novel coated design and a conventional fixed bed are compared in the paper. The developed computational model consisted of three subdomains representing heating water, heat exchanger material (copper) and sorbent (silica gel).