Search

To assess the planned dose, in vivo dosimetry, acute skin toxicity, pain, and distress using Thermoplastic Elastomer (TPE) bolus for postmastectomy radiotherapy (PMRT). Thirty-two PMRT patients with TPE bolus (17 patients for 25 fractions, 15 patients for the first 20 fractions) were selected for the study. The acute skin toxicity, pain, and psychological distress were assessed from the first treatment week to the fourth week after the end of treatment. At the first treatment, the MOSFET was used in vivo dosimetry measurement. In vivo dosimetry with the bolus, the dose deviation ranged from −6.22% to −1.56% for 5 points. The presence of grade 1 and 2 skin toxicity reached its peak (70.0% and 13.3%) in the sixth week. Two patients (6.6%) with 25 fractions bolus experienced moist desquamation in the fifth and seventh week, with pain score 2 and 3, and interruptions of 3 and 5 days, respectively. The incidence of pain score 1, 2, and 3 peaked in the fifth (33.3%), fourth (33.3%), and seventh (10.0%) week. No patients experienced grade 3 skin toxicity and severe pain. One patient had significant anxiety, and two patients had significant depression. The TPE bolus can accurately fit skin and improve the surface dose to more than 90%. Twenty fractions with TPE bolus had similar skin toxicity and pain to those without bolus and did not increase patients' distress and clinical workload, compared with the literature's data, which is an alternative to the 3D printing bolus for PMRT. • First reported the soft and self-viscosity TPE bolus in PMRT. • Evaluated the planning and in vivo dose in PMRT using TPE bolus. • TPE bolus had similar skin toxicity to those without bolus compared with the literature's data. • Using TPE bolus did not increase patients' psychological distress and clinical workload compared with the literature's data. [ABSTRACT FROM AUTHOR]

The purpose of the study was to evaluate the accuracy of monochromatic energy (MonoE) computed tomography (CT) images reconstructed by spectral CT in predicting the stopping power ratio |$(SP{R}_w)$| of materials in the presence of metal. The CIRS062 phantom was scanned three times using spectral CT. In the first scan, a solid water insert was placed at the center of the phantom |$(C{T}_{no\ metal})$|⁠. In the second scan, the solid water insert was replaced with a titanium alloy femoral head |$(C{T}_{metal})$|⁠. The metal artifact reduction (MAR) algorithm was used in the last scan |$(C{T}_{metal+ MAR})$|⁠. The MonoE-CT images of 40 keV and 80 keV were reconstructed. Finally, the single-energy CT method (SECT) and the dual-energy CT method (DECT) were used to calculate the |$SP{R}_w$|⁠. The mean absolute error (MAE) of the |$SP{R}_w$| of the inner layer inserts calculated by the SECT method were 3.19%, 13.88% and 2.71%, corresponding to |$C{T}_{no\ metal}$|⁠ , |$C{T}_{metal}$| and |$C{T}_{metal+ MAR}$|⁠ , respectively. For the outer layer inserts, the MAE of |$SP{R}_w$| were 3.43%, 5.42% and 2.99%, respectively. Using the DECT method, the MAE of the |$SP{R}_w$| of the inner layer inserts was 1.30%, 3.69% and 1.46% and the MAE of the outer layer inserts– was 1.34%, 1.36% and 1.05%. The studies shows that, compared with the SECT method, the accuracy of the DECT method in predicting the |$SP{R}_w$| of a material is more robust to the presence of metal. Using the MAR algorithm when performing CT scans can further improve the accuracy of predicting the SPR of materials in the presence of metal. [ABSTRACT FROM AUTHOR]

Purpose: Establishing the tolerance limits of patient‐specific quality assurance (PSQA) processes based on the gamma passing rate (GPR) by using normal statistical process control (SPC) methods involves certain problems. The aim of this study was threefold: (a) to show that the heuristic SPC method can replace the quantile method for establishing tolerance limits in PSQA processes and is more robust, (b) to introduce an iterative procedure of "Identify‐Eliminate‐Recalculate" for establishing the tolerance limits in PSQA processes with unknown states based on retrospective GPRs, and (c) to recommend a workflow to define tolerance limits based on actual clinical retrospective GPRs. Materials and Methods: A total of 1671 volumetric‐modulated arc therapy (VMAT) pretreatment plans were measured on four linear accelerators (linacs) and analyzed by treatment sites using the GPRs under the 2%/2 mm, 3%/2 mm, and 3%/3 mm criteria. Normality testing was performed using the Anderson‐Darling (AD) statistic and the optimal distributions of GPRs were determined using the Fitter Python package. The iterative "Identify‐Eliminate‐Recalculate" procedure was used to identify the PSQA outliers. The tolerance limits of the initial PSQAs, remaining PSQAs after elimination, and in‐control PSQAs after correction were calculated using the conventional Shewhart method, two transformation methods, three heuristic methods, and two quantile methods. The tolerance limits of PSQA processes with different states for the respective methods, linacs, and treatment sites were comprehensively compared and analyzed. Results: It was found that 75% of the initial PSQA processes and 63% of the in‐control processes were non‐normal (AD test, p < 0.05). The optimal distributions of GPRs for the initial and in‐control PSQAs varied with different linacs and treatment sites. In the implementation of the "Identify‐Eliminate‐Recalculate" procedure, the quantile methods could not identify the out‐of‐control PSQAs effectively due to the influence of outliers. The tolerance limits of the in‐control PSQAs, calculated using the quantile of optimal fitting distributions, represented the ground truth. The tolerance limits of the in‐control PSQAs and remaining PSQAs after elimination calculated using the heuristic methods were considerably close to the ground truth (the maximum average absolute deviations were 0.50 and 1.03%, respectively). Some transformation failures occurred under both transformation methods. For the in‐control PSQAs at 3%/2 mm gamma criteria, the maximum differences in the tolerance limits for four linacs and different treatment sites were 3.10 and 5.02%, respectively. Conclusions: The GPR distributions of PSQA processes vary with different linacs and treatment sites but most are skewed. In applying SPC methodologies to PSQA processes, heuristic methods are robust. For in‐control PSQA processes, the tolerance limits calculated by heuristic methods are in good agreement with the ground truth. For unknown PSQA processes, the tolerance limits calculated by the heuristic methods after the iterative "Identify‐Eliminate‐Recalculate" procedure are closest to the ground truth. Setting linac‐ and treatment site‐specific tolerance limits for PSQA processes is necessary for clinical applications. [ABSTRACT FROM AUTHOR]

Abstract Background To study the set-up errors, PTV margin and toxicity of cone beam CT (CBCT) guided hypofractionated radiotherapy with active breathing control (ABC) for patients with non-small cell lung cancer (NSCLC) or metastatic tumors in lung. Methods 32 tumors in 20 patients were treated. Based on the location of tumor, dose per fraction given to tumor was divided into three groups: 12 Gy, 8 Gy and 6 Gy. ABC is applied for every patient. During each treatment, patients receive CBCT scan for online set-up correction. The pre- and post-correction setup errors between fractions, the interfractional and intrafractional, set-up errors, PTV margin as well as toxicity are analyzed. Results The pre-correction systematic and random errors in the left-right (LR), superior-inferior (SI), anterior-posterior (AP) directions were 3.7 mm and 5.3 mm, 3.1 mm and 2.1 mm, 3.7 mm and 2.8 mm, respectively, while the post-correction residual errors were 0.6 mm and 0.8 mm, 0.8 mm and 0.8 mm, 1.2 mm and 1.3 mm, respectively. There was an obvious intrafractional shift of tumor position. The pre-correction PTV margin was 9.5 mm in LR, 14.1 mm in SI and 8.2 mm in AP direction. After CBCT guided online correction, the PTV margin was markedly reduced in all three directions. The post-correction margins ranged 1.5 to 2.1 mm. The treatment was well tolerated by patients, of whom there were 4 (20%) grade1-2 acute pneumonitis, 3 (15%) grade1 acute esophagitis, 2 (10%) grade1 late pneumonitis and 1 (5%) grade 1 late esophagitis. Conclusion The positioning errors for lung SBRT using ABC were significant. Online correction with CBCT image guidance should be applied to reduce setup errors and PTV margin, which may reduce radiotherapy toxicity of tissues when ABC was used.

Purpose: To analyze the influence of the bladder and rectum filling and the body contour changes on the prostate target dose. Methods: A total of 190 cone-beam CT (CBCT) image data sets from 16 patients with prostate cancer were used in this study. Dose reconstruction was performed on the virtual CT generated by the deformable planning CT. Then, the effects of the bladder filling, rectal filling, and the patient's body contour changes of the PCTV1 (the prostate area, B1) and PCTV2 (the seminal vesicle area, B2) on the target dose were analyzed. Correlation analysis was performed for the ratio of bladder and rectal volume variation and the variation of the bladder and rectal dose. Results: The mean Dice coefficients of B1, B2, bladder, and rectum were 0.979, 0.975, 0.888 and 0.827, respectively, and the mean Hausdorff distances were 0.633, 1.505, 2.075, and 1.533, respectively. With the maximum volume variations of 142.04 ml for the bladder and 40.50 ml for the rectum, the changes of V100, V95, D2, and D98 were 1.739 ± 1.762 (%), 0.066 ± 0.169 (%), 0.562 ± 0.442 (%), and 0.496 ± 0.479 (%) in PCTV1 and 1.686 ± 1.051 (%), 0.240 ± 0.215 (%), 1.123 ± 0.925 (%), and 0.924 ± 0.662 (%) in PCTV2, respectively. With a 10% increase in the volume of the bladder and rectum, the V75, V70, and V65 of rectum increased at 0.73 (%), 0.71 (%), and 1.18 (%), and the V75, V70, and V65 of bladder changed at −0.21 (%), −0.32 (%), and −0.39 (%), respectively. Conclusion: Significant correlations were observed between the volume variation and the dose variation of the bladder and rectum. However, when a bladder and rectal filling protocol was adopted, the target dose coverage can be effectively ensured based on CBCT guidance to correct the prostate target position. [ABSTRACT FROM AUTHOR]

The aim of the study was to evaluate the clinical feasibility of a 3D-print silica bolus for nasal NK/T-cell lymphoma radiation therapy. Intensity modulated radiotherapy (IMRT) and volumetric modulated arc therapy (VMAT) plans were designed using an anthropomorphic head phantom with a 3D-print silica bolus and other kinds of bolus used clinically, and the surface dose was measured by a metal oxide semiconductor field-effect transistor (MOSFET) dosimeter. Four nasal NK/T patients with or without 3D-print silica bolus were treated and the nose surface dose was measured using a MOSFET dosimeter during the first treatment. Plans for the anthropomorphic head phantom with 3D-print bolus have more uniform dose and higher conformity of the planning target volume (PTV) compared to other boluses; the homogeneity index (HI) and conformity index (CI) of the VMAT plan were 0.0589 and 0.7022, respectively, and the HI and CI of the IMRT plan were 0.0550 and 0.7324, respectively. The MOSFET measurement results showed that the surface dose of the phantom with 3D-print bolus was >180 cGy, and that of patients with 3D-print bolus was higher than patients without bolus. The air gap volume between the 3D-print bolus and the surface of patients was <0.3 cc. The 3D-print silica bolus fitted well on the patient's skin, effectively reducing air gaps between bolus and patient surface. Meanwhile, the 3D-print silica bolus provided patients with higher individuation, and improved the conformity and uniformity of the PTV compared to other kinds of boluses. [ABSTRACT FROM AUTHOR]

To design a new breast vacuum bag to reduce global and local setup errors in post-mastectomy radiation therapy (PMRT). A total of 24 PMRT patients were immobilized with an old vacuum bag and 26 PMRT patients were immobilized with a new vacuum bag. The registration results were analysed using four regions of interest (ROI): the global ROI [including the whole region of the planning target volume (PTV), GROI], the supraclavicular area (SROI), the ipsilateral chest wall region (CROI) and the ipsilateral arm region (AROI). The global and local setup errors of the two groups were compared. The global setup errors of the new vacuum group were significantly smaller than those in the old vacuum group with the exception of yaw axes (P  < 0.05). The systematic error (Σ) and random error (σ) ranged from 1.21 to 2.13 mm. In the new vacuum group, the local setup errors in the medial-lateral (ML) direction and roll axes for CROI (the Σ and σ ranged from 0.65 to 1.35 mm), and the local setup errors in ML and superior-inferior (SI) directions for SROI were significantly smaller than those in the old vacuum group. The total required PTV margins for the chest wall in ML, SI, and anterior-posterior (AP) were 4.40, 3.12 and 3.77 mm respectively. The new vacuum bag can significantly reduce the global setup errors and local setup errors in PMRT. The respiratory motion of the chest wall was negligible, and the 5 mm PTV margin could cover the local setup errors in PMRT using the new vacuum bag with cone beam CT (CBCT) correction. [ABSTRACT FROM AUTHOR]

Purpose: Applying statistical process control (SPC) to intensity‐modulated radiotherapy (IMRT)/volumetric modulated arc therapy (VMAT) patient‐specific quality assurance (PSQA) program was recommended by the American Association of Physics in Medicine Task Group 218 report, but a comprehensive analysis of PSQA processes with non‐normal distributions is lacking. This study investigates SPC and process capability analysis (PCA) methods for non‐normal IMRT/VMAT PSQA processes. Methods: 1119 VMAT PSQAs were performed on three beam‐matched linear accelerators (linacs), using gamma analysis. The Anderson–Darling statistic was used to test normality. The control charts for each PSQA process were obtained using three non‐normal‐based methods and compared with the conventional Shewhart method. The ability of each PSQA process to produce an output within the specification limit was measured using the Cpk index; in this study, the Cpk index was calculated using two transformation methods and compared with that calculated using the conventional method. The performances of the three linacs were assessed using SPC and PCA methods. Results: All three PSQA processes were non‐normal (P < 0.005). Compared to the non‐normal‐based SPC and PCA methods, the false alarm rates of the conventional method for linac1, linac2, and linac3 were 0.83%, 3.77%, and 4.95% respectively; the minimum overestimated Cpk values were 0.59, 0.87, and 1.49, respectively. The process capabilities of the three beam‐matched linacs were at different levels. Conclusion: For non‐normal VMAT PSQA processes, the conventional SPC and PCA methods increase the false alarm rates and overestimate process capabilities. Instead, non‐normal‐based SPC and PCA methods are more reliable and accurate in non‐normal PSQA processes. Statistical process control and PCA are useful tools for assessing the performance of beam‐matched linacs. [ABSTRACT FROM AUTHOR]

Background: Partial breast radiotherapy (PBI) has emerged as an option after breast-conserving surgery for early stage breast cancer patients. Methods: A total of 55 patients with early stage breast cancer between 2009 and 2013 were enrolled in this single-institutional phase II prospective clinical trial. All patients received adjuvant PBI-IMRT after lumpectomy, with the prescription of 48 Gy in 12 fractions at 4 Gy per fraction, 5 days a week. The primary endpoint was ipsilateral breast tumor recurrence (IBTR), the other endpoints were a regional nodal failure (RNF), distant metastasis (DM) rate, disease-free survival (DFS), and overall survival (OS). These endpoints were used to evaluate clinical outcomes. The cosmetic effects and the late toxicity were assessed according to Harvard standard scale and CTCAE 3.0, respectively. Results: In our cohorts, the median age was 45.60 years old (range 31–65 years) and 29.09% of these patients were post-menopause (n = 16). Most patients were T1 stage (65.45%) or N0 stage (70.91%). 80% of patients were ER-positive, 67.27% PR positive, and 61.82% HER2 negative. At the median follow-up of 9.25 years, RNF was 0% and IBTR occurred in only one patient (1.82%) to the chest wall. Except for one patient (1.82%) had DM to lung and pleura and died from disease progression, the remaining patients were alive at the end of the 10-year follow-up. The 10-year DFS and OS were 94.55 and 98.18%. One patient (1.82%) was diagnosed with endometrial cancer after PBI. Except for 9 patients who declined the cosmetic assessment, the rest of the 46 patients (83.64%) were all rated as good and well-satisfied with the appearance of the irradiated breast. No breast retraction and fibrosis were observed in any of the patients. Additionally, only 4 patients experienced grade 1 late toxicity (7.28%). None had grade 3 or higher late toxicity. Conclusion: This is the first study to report the 10-year results of PBI after breast-conserving surgery in Chinese patients. Our study suggested that PBI had durable local control and maintained good cosmetic outcomes with minimal late toxicity at long term follow up for the early stage breast cancer patients. [ABSTRACT FROM AUTHOR]

The purpose of the study was to quantify local setup errors and evaluate the planning target volume (PTV) margins for sub-regions in cone-beam computed tomography (CBCT)-guided post-mastectomy radiation therapy (PMRT). The local setup errors of 20 patients undergoing CBCT-guided PMRT were analysed retrospectively. Image registration between CBCT and planning CT was performed using four sub-regions of interest (ROIs): the supraclavicular area (SROI), ipsilateral chest wall region (CROI), ipsilateral chest wall plus supraclavicular region (SROI + CROI) and vertebral region (TROI). Bland–Altman analysis, correlation, local setup errors and PTV margins among these ROIs were evaluated. There was no significant consistency or correlation for registration results between the TROI and the CROI or SROI regions on any translational axis. When using the SROI + CROI as the ROI, the systematic error (Σ) and random error (σ) of the local setup errors for the CROI region were 1.81, 1.19 and 1.76 mm and 1.84, 2.64 and 3.00 mm along the medial–lateral (ML), superior–inferior (SI) and anterior–posterior (AP) directions, respectively. The PTV margins for the CROI region were 5.80, 4.82 and 6.50 mm. The Σ and σ of the local setup errors for the SROI region were 1.29, 1.15 and 0.77 mm and 1.96, 2.65 and 2.2 mm, respectively, and the PTV margins were 4.59, 4.73 and 3.47 mm. Large setup errors and local setup errors occur in PMRT. The vertebral body should not be a position surrogate for the supraclavicular region or chest wall. To compensate for the local setup errors, different PTV margins are required, even with CBCT guidance. [ABSTRACT FROM AUTHOR]

Background: The aim of this study is to assess the effect of home enteral nutrition (HEN) on the myelosuppression of patients with nasopharyngeal cancer (NPC) during the course of concurrent chemoradiotherapy (CCRT). Methods: A total of 18 outpatients with NPC administered oral nutritional supplementation intervention at home during the course of CCRT were designated as the HEN group, whereas 36 patients with NPC who had previously completed CCRT were retrospectively included as the control group. Patient Generated Subjective Global Assessment, body mass index (BMI), and blood test were evaluated prior to CCRT. During the course of CCRT, blood test was assessed every 2 weeks. Results: In male patients, hemoglobin (HB) and red blood cell were decreased (P < .05) in both HEN and control group after CCRT, whereas white blood cell (WBC) started to decrease since week 2 of CCRT in the control group but maintained in the HEN group which was significantly higher than the control (5.05 ± 1.29 vs 3.77 ± 1.5, P < .05). In female patients, HB and WBC were reduced in control group during CCRT, whereas these indicators also maintained in the HEN group. Surprisingly, all patients with lower BMI (<24 kg/m2) had a significant increase in platelet (PLT) after CCRT (200.78 ± 58.03 vs 253.00 ± 69.82, P < .05), while had steady HB and WBC values in the HEN group. At the end of CCRT, WBC and PLT of the HEN group were both higher than those in the control group (5.21 ± 1.07 vs 3.37 ± 1.52), (253.00 ± 69.82 vs 165.57 ± 59.56) (P < .05 for both). Our findings suggest that HEN is effective in preventing myelosuppression during CCRT for patients with NPC. Conclusion: Our findings suggest that HEN is effective in preventing myelosuppression during CCRT for patients with NPC. [ABSTRACT FROM AUTHOR]

Background Non-small cell lung cancer ( NSCLC) harboring kinase-domain mutations in epidermal growth factor receptors ( EGFR) has been observed to be sensitive to ionizing radiation ( IR). We explore Rad51-dependent homologous recombination ( HR) DNA repair in regulating radiosensitivity in two NSCLC cell lines with different EGFR mutation status. Methods NSCLC cell lines, wild-type EGFR A549 and mutant EGFR H820 with an in-frame deletion in exon 19 of EGFR (Δ E746- E750), were cultured. Radiosensitivity was estimated by colony forming assay. Rad51 expression was evaluated by quantitative real time-polymerase chain reaction and Western-blot. Lentiviral small hairpin ribonucleic acid- Rad51 and Δ E746- E750 deletion mutant EGFR were constructed and transfected into cells. Flowcytometry assay was used to analyze DNA double strand breaks, cell cycle alterations, and apoptosis. Results A549 had a higher survival factor ( SF)2 (0.66 vs. 0.44) and lower α/β value (4.07 vs. 9.01). Compared with the A549 cell, the H820 cell exhibited defective arrest in the S-phase, a higher rate of G2/M accumulation, early apoptosis, and residual γ- H2AX. Downregulated Rad51 expression decreased SF2 (0.42 vs. 0.31) and increased the α/β ratio (7.51 vs. 10.5), G2/M accumulation, early apoptosis, and γ- H2AX in two cell lines. H820 had a low IR-induced Rad51 expression and nuclear translocation. Exogenous expression of the Δ E746- E750 deletion mutant EGFR caused the A549 cell to become more radiosensitive. Conclusions An EGFR mutated NSCLC cell line is sensitive to IR , which is correlated with reduced IR-induced Rad51 expression and nuclear translocation. The signaling pathway of EGFR maintaining Rad51 protein levels maybe a novel lung cancer therapeutic target to overcome radioresistance. [ABSTRACT FROM AUTHOR]

Abstract: Background and purpose: To evaluate the feasibility and validity of cone beam computed tomography (CBCT) and active breath control (ABC) by long breath-holding in hypofraction radiotherapy of liver tumor. Methods and materials: Twenty-four patients received hypofraction radiotherapy of liver tumor with long breath-holding at end-inhale; four prescriptions were used: 6Gy×7 (n =8), 10Gy×4 (n =7), 5Gy×9 (n =6), 4Gy×10 (n =3). For each fraction, all patients received pre-correction CBCT scans with ABC, some patients received post-correction and post-treatment CBCT. The interfraction and intrafraction liver positioning errors on medial–lateral (ML), cranial–caudal (CC) and anterior–posterior (AP) directions were obtained. The theoretic margin from clinical target volume (CTV) to planning target volume (PTV) was calculated based on post-treatment error. The dosimetric parameters of PTV and normal tissue were compared between ABC and free breathing (FB). Results: The interfraction error in liver positioning showed system errors (Σ) of 3.18mm (ML), 6.80mm (CC) and 3.05mm (AP); random error (σ) of 3.03mm (ML), 6.78mm (CC) and 3.62mm (AP). These errors were significantly reduced with CBCT guided online correction. The intrafraction systematic error was 0.72mm (ML), 2.21mm (CC), 1.49mm (AP), and random error was 2.30mm (ML), 3.58mm (CC), 2.49mm (AP). Dosimetric parameters such as PTV, the liver’s volume included by 23, 30Gy isodose curve (V23, V30), mean dose to normal liver (MDTNL) and mean dose to cord were significantly larger for FB (P <0.05). Conclusion: Liver radiotherapy with long time breath-holding at end-inhale is an effective method to reduce liver motion, PTV and dose to normal tissue. Interfraction and intrafraction liver positioning errors were substantial. CBCT guided online correction of positioning error is recommended for liver radiotherapy with end-inhale ABC. [Copyright &y& Elsevier]

To analyse which local set-up errors can be covered by a 5-mm margin for cone beam computed tomography (CBCT)-guided radiotherapy in nasopharyngeal carcinoma (NPC). 11 regions of interest (ROIs) were registered for 24 NPC patients, with a total of 323 CBCT scans. According to the registration results, clinical target volume–planning target volume (CTV–PTV)/organs at risk-planning risk volume (OAR-PRV) margin analysis; Pearson correlation analysis; Bland–Altman plots; and a receiver operating characteristic (ROC) analysis were used to investigate which local set-up errors of substructure can be represented by the PTVROI. The clinical target volume-PTV/OAR-planning risk volume margins were less than 5 mm for C1ROI-C4ROI, mandible (MROI), and sphenoid sinus (SROI) with respect to PTVROI. C1ROI-C4ROI, MROI, and SROI exhibited significant correlations and consistencies in the mediolateral, superior–inferior, and anteroposterior (AP) directions and significant receiver operating characteristic analysis results in the anteroposterior direction. Only the upper local set-up error of C1ROI-C4ROI, MROI, and SROI can be covered by a 5-mm margin for CBCT-guided NPC radiotherapy with a large ROI. Using these ROIs as an integral reference ROI is better than individual bony landmark. This report is helpful to CBCT registration for NPC radiotherapy in clinical practice. [ABSTRACT FROM AUTHOR]

Background: To analyze the feasibility of active breath control (ABC), the lung tumor reproducibility and the rationale for single-breath-hold cone beam CT (CBCT)-guided hypofraction radiotherapy.Methods: Single-breath-hold CBCT images were acquired using ABC in a cohort of 83 lung cancer patients (95 tumors) treated with hypofraction radiotherapy. For all alignments between the reference CT and CBCT images (including the pre-correction, post-correction and post-treatment CBCT images), the tumor reproducibility was evaluated via online manual alignment of the tumors, and the vertebral bone uncertainties were evaluated via offline manual alignment of the vertebral bones. The difference between the tumor reproducibility and the vertebral bone uncertainty represents the change in the tumor position relative to the vertebral bone. The relative tumor positions along the coronal, sagittal and transverse axes were measured based on the reference CT image. The correlations between the vertebral bone uncertainty, the relative tumor position, the total treatment time and the tumor reproducibility were evaluated using the Pearson correlations.Results: Pre-correction, the systematic/random errors of tumor reproducibility were 4.5/2.6 (medial-lateral, ML), 5.1/4.8 (cranial-caudal, CC) and 4.0/3.6 mm (anterior-posterior, AP). These errors were significantly decreased to within 3 mm, both post-correction and post-treatment. The corresponding PTV margins were 4.7 (ML), 7.4 (CC) and 5.4 (AP) mm. The changes in the tumor position relative to the vertebral bone displayed systematic/random errors of 2.2/2.0 (ML), 4.1/4.4 (CC) and 3.1/3.3 (AP) mm. The uncertainty of the vertebral bone significantly correlated to the reproducibility of the tumor position (P<0.05), except in the CC direction post-treatment. However, no significant correlation was detected between the relative tumor position, the total treatment time and the tumor reproducibility (P>0.05).Conclusions: Using ABC for single-breath-hold CBCT guidance is an effective method to reduce the PTV margin of hypofraction radiotherapy for lung cancer. Using ABC, the tumor position was significantly altered relative to the vertebral position. The reproducibility of the tumor position was affected by the vertebral bone but not by the relative tumor position or the total treatment time. [ABSTRACT FROM AUTHOR]

Background: Whole brain radiotherapy (WBRT) plus sequential focal radiation boost is a commonly used therapeutic strategy for patients with brain metastases. However, recent reports on WBRT plus simultaneous in-field boost (SIB) also showed promising outcomes. The objective of present study is to retrospectively evaluate the efficacy and toxicities of WBRT plus SIB with image guided intensity-modulated radiotherapy (IG-IMRT) for inoperable brain metastases of NSCLC.Methods: Twenty-nine NSCLC patients with 87 inoperable brain metastases were included in this retrospective study. All patients received WBRT at a dose of 40 Gy/20 f, and SIB boost with IG-IMRT at a dose of 20 Gy/5 f concurrent with WBRT in the fourth week. Prior to each fraction of IG-IMRT boost, on-line positioning verification and correction were used to ensure that the set-up errors were within 2 mm by cone beam computed tomography in all patients.Results: The one-year intracranial control rate, local brain failure rate, and distant brain failure rate were 62.9%, 13.8%, and 19.2%, respectively. The two-year intracranial control rate, local brain failure rate, and distant brain failure rate were 42.5%, 30.9%, and 36.4%, respectively. Both median intracranial progression-free survival and median survival were 10 months. Six-month, one-year, and two-year survival rates were 65.5%, 41.4%, and 13.8%, corresponding to 62.1%, 41.4%, and 10.3% of intracranial progression-free survival rates. Patients with Score Index for Radiosurgery in Brain Metastases (SIR) >5, number of intracranial lesions <3, and history of EGFR-TKI treatment had better survival. Three lesions (3.45%) demonstrated radiation necrosis after radiotherapy. Grades 2 and 3 cognitive impairment with grade 2 radiation leukoencephalopathy were observed in 4 (13.8%) and 4 (13.8%) patients. No dosimetric parameters were found to be associated with these late toxicities. Patients received EGFR-TKI treatment had higher incidence of grades 2-3 cognitive impairment with grade 2 leukoencephalopathy.Conclusions: WBRT plus SIB with IG-IMRT is a tolerable and effective treatment for NSCLC patients with inoperable brain metastases. However, the results of present study need to be examined by the prospective investigations. [ABSTRACT FROM AUTHOR]

Martian dust plays an important role in modulating climate. However, the effects of dust on polar CO2 ice caps, atmospheric circulation processes and the relationship between them are not yet clear. In this study, a Mars general circulation model (MarsWRF) was applied to investigate the impacts of the magnitude and timing of Martian dust storms on the spatiotemporal characteristics of polar CO2 ice caps and atmospheric circulation. The results show that dust can inhibit the sublimation of southern CO2 ice through the radiation effect. Under the "High Dust" scenario, the ice edge can extend up to 5° more equatorward than that under the "Standard" scenario around Ls = 220°. The extent of northern CO2 ice cap is hardly affected by dust because the impacts induced by dust mainly appear north of 80°N. By shifting the timing of maximum dust loading during the dust season, the "Early Dust" scenario inhibits the sublimation of the southern ice cap, while the "Late Dust" scenario accelerates the sublimation process. In addition, the variations in dust loading strength can lead to changes in three near‐surface wind belts, which are related to intensified Hardly circulation. The appearance of the warming vortex under the "Early Dust" scenario is delayed, and its intensity is 60 K lower than that observed in the "High Dust" and "Late Dust" scenarios. When dust loading increases, the northern CO2 condensation process in the Western Hemisphere accelerates, which is due to the increased pole‐to‐equator temperature gradient and the increased meridional wind speed. Plain Language Summary: Dust has a strong influence on the Martian climate. However, the dust effects on polar CO2 ice caps and wind fields have not yet been fully investigated. In this study, a numerical model that simulates the Martian climate was applied to investigate changes in the spatial and temporal patterns of CO2 ice caps and three‐dimensional wind fields. The results show that dust can inhibit the sublimation of southern CO2 ice by influencing the surface energy balance, while the coverage area of the northern CO2 ice cap is hardly affected by dust because the impacts induced by dust mainly appear north of 80°N. In terms of the timing of Martian dust storms, when a dust storm starts early (late), the sublimation of the southern ice cap is inhibited (accelerated). The appearance of the warming vortex will be delayed and its temperature will be 60 K lower than that in the general scenario if the dust storm starts early. When dust loading increases, the northern surface CO2 ice in the Western Hemisphere also increases, which is due to the increased pole‐to‐equator temperature gradient and increased meridional wind speed. Key Points: High dust loading decelerates the recession of southern CO2 ice cap, while the extent of northern CO2 ice cap is hardly affected by dustWhen Martian dust storm starts early, the appearance of the warming vortex is delayed and its intensity weakensThe increase in northern surface CO2 ice is induced by the increased polar‐equator temperature gradient and the increased meridional flow [ABSTRACT FROM AUTHOR]