Search

We have proposed and implemented a modification of the well-known wall follower algorithm to identify a backbone (a current-carrying part) of the percolation cluster. The advantage of the modified algorithm is identification of the whole backbone without visiting all edges. The algorithm has been applied to backbone identification in networks produced by random deposition of conductive sticks onto an insulating substrate. We have found that (i) for concentrations of sticks above the percolation threshold, the strength of the percolating cluster quickly approaches unity; (ii) simultaneously, the percolation cluster is identical to its backbone plus simplest dead ends, i.e., edges that are incident to vertices of unit degree., 6 pages, 3 figures, 39 references

Using computer simulation, we have studied the random sequential adsorption of stiff linear $k$-mers onto a square lattice. Each such particle occupies $k$ adjacent lattice sites. During deposition, the two mutually perpendicular orientations of the particles are equiprobable, hence, a macroscopically isotropic monolayer is formed. However, this monolayer is locally anisotropic, since the deposited particles tend to form domains of particles with the same orientation. Using the "excluded area" concept, we have classified lattice sites into several types and examined how the fraction of each type of lattice site varies as the number of deposited particles increases. The behaviors of these quantities have allowed us to identify the following stages of domain formation (i) the emergence of domain seeds; (ii) the filling of domains; (iii) densification of the domains., 6 pages, 8 figures, 33 references

We consider $N$ circles of equal radii, $r$, having their centers randomly placed within a square domain $\mathcal{D}$ of size $L \times L$ with periodic boundary conditions ($\mathcal{D} \in \mathbb{R}^2$). When two or more circles intersect each other, each circle is divided by the intersection points into several arcs. We found the exact length distribution of the arcs. In the limiting case of dense systems and large size of the domain $\mathcal{D}$ ($L \to \infty$ in such a way that the number of circle per unit area, $n=N/L^2$, is constant), the arc distribution approaches the probability density function (PDF) $f(\psi) = 4 n r^2\exp(-4 n r^2 \psi)$, where $\psi$ is the central angle subtended by the arc. This PDF is then used to estimate the sheet resistance of transparent electrodes based on conductive rings randomly placed onto a transparent insulating film., Comment: 16 pages, 8 figures, 24 references

Aging in a two dimensional suspension containing rods was studied by means of kinetic Monte Carlo simulations. An off-lattice model with continuous positional and orientational degrees of freedom was considered. The initial state was produced using a random sequential adsorption model. During the aging, the rods underwent translational and rotational Brownian motions. The simulations were run at different values of number density (the number of rods per unit area), $\rho$, and of the initial orientation order parameter, $S_i$. The rods were assumed to have core---shell structures. The evolutions of both the connectivity and the order parameter in the course of the aging were examined., Comment: 8 pages, 8 figures

The sedimentation of a two dimensional suspension containing rods was studied by means of kinetic Monte Carlo (MC) simulations. An off-lattice model with continuous positional and orientational degrees of freedom was considered. The initial state before sedimentation was produced using a model of random sequential adsorption. During such sedimentation, the rods undergo translational and rotational Brownian motions. The MC simulations were run at different initial number densities (the numbers of rods per unit area), $\rho_i$, and sedimentation rates, $u$. For sediment films, the spatial distributions of the rods, the order parameters and the electrical conductivities were examined. Different types of sedimentation-driven self-assembly and anisotropy of the electrical conductivity were revealed inside the sediment films. This anisotropy can be finely regulated by changes in the values of $\rho_i$ and $u$., Comment: 11 pages, 11 figures, 68 references

The experiments conducted by various scientific groups indicate that, in dense two-dimensional systems of elongated particles subjected to vibration, the pattern formation is possible. Computer simulations have evidenced that the random walk of rectangular particles in a discrete two-dimensional space can lead to their self-organisation. We propose a technique for calculating the entropy characteristics of a two-dimensional system in a discrete two-dimensional space consisting of rectangular particles of two mutually perpendicular orientations, and a change in these characteristics for a random walk of particles is investigated., 6 pages, 5 figures, presented at 7th International Conference on Mathematical Modeling in Physical Sciences, August 27-31, 2018, Moscow, Russia; to be published in J.Phys.Conf.Ser

We simulated random walk of rectangular particles on a square lattice with periodic boundary conditions. Two kind of particles were investigated, viz., so-called `blind' and `myopic' particles. We found that steady state patterns occurred only for some values of the ratio $L_x/L_y$ where $L_x$ and $Ly$ are the linear sizes of the system and only for `needles', i.e., the particles of size $1 \times k$. Different patterns were observed for `blind' and `myopic' particles., Comment: 6 pages, 9 figures; to be presented at International Conference on Computer Simulation in Physics and beyond, September 24-27, 2018, Moscow, Russia http://csp2018.ac.ru/ and to be submitted to J.Phys.Conf.Ser

The vertical drying of a two dimensional colloidal film containing zero-thickness sticks (lines) was studied by means of kinetic Monte Carlo (MC) simulations. The continuous two-dimensional problem for both the positions and orientations was considered. The initial state before drying was produced using a model of random sequential adsorption with isotropic orientations of the sticks. During the evaporation, an upper interface falls with a linear velocity in the vertical direction and the sticks undergo translational and rotational Brownian motions. The MC simulations were run at different initial number concentrations (the numbers of sticks per unit area), $p_i$, and solvent evaporation rates, $u$. For completely dried films, the spatial distributions of the sticks, the order parameters and the electrical conductivities of the films in both the horizontal, $x$, and vertical, $y$, directions were examined. Significant evaporation-driven self-assembly and stratification of the sticks in the vertical direction was observed. The extent of stratification increased with increasing values of $u$. The anisotropy of the electrical conductivity of the film can be finely regulated by changes in the values of $p_i$ and $u$., 10 pages, 8 figures, 47 references, submitted to PRE

The vertical drying of a colloidal film containing rod-like particles was studied by means of kinetic Monte Carlo (MC) simulation. The problem was approached using a two-dimensional square lattice and the rods were represented as linear $k$-mers (i.e., particles occupying $k$ adjacent sites). The initial state before drying was produced using a model of random sequential adsorption (RSA) with isotropic orientations of the $k$-mers (orientation of the $k$-mers along horizontal $x$ and vertical $y$ directions are equiprobable). In the RSA model, overlapping of the $k$-mers is forbidden. During the evaporation, an upper interface falls with a linear velocity of $u$ in the vertical direction and the $k$-mers undergo translation Brownian motion. The MC simulations were run at different initial concentrations, $p_i$, ($p_i \in [0, p_j]$, where $p_j$ is the jamming concentration), lengths of $k$-mers ($k \in [1, 12]$), and solvent evaporation rates, $u$. For completely dried films, the spatial distributions of $k$-mers and their electrical conductivities in both $x$ and $y$ directions were examined. Significant evaporation-driven self-assembly and orientation stratification of the $k$-mers oriented along the $x$ and $y$ directions were observed. The extent of stratification increased with increasing value of $k$. The anisotropy of the electrical conductivity of the film can be finely regulated by changes in the values of $p_i$, $k$ and $u$., 11 pages, 10 figures, submitted to Phys. Rev. E

The effect of defects on the percolation of linear $k$-mers (particles occupying $k$ adjacent sites) on a square lattice is studied by means of Monte Carlo simulation. The $k$-mers are deposited using a random sequential adsorption mechanism. Two models, $L_d$ and $K_d$, are analyzed. In the $L_d$ model, it is assumed that the initial square lattice is non-ideal and some fraction of sites, $d$, is occupied by non-conducting point defects (impurities). In the $K_d$ model, the initial square lattice is perfect. However, it is assumed that some fraction of the sites in the $k$-mers, $d$, consists of defects, i.e., are non-conducting. The length of the $k$-mers, $k$, varies from 2 to 256. Periodic boundary conditions are applied to the square lattice. The dependencies of the percolation threshold concentration of the conducting sites, $p_c$, vs the concentration of defects, $d$, were analyzed for different values of $k$. Above some critical concentration of defects, $d_m$, percolation is blocked in both models, even at the jamming concentration of $k$-mers. For long $k$-mers, the values of $d_m$ are well fitted by the functions $d_m \propto k_m^{-\alpha}-k^{-\alpha}$ ($\alpha = 1.28 \pm 0.01$, $k_m = 5900 \pm 500$) and $d_m \propto \log (k_m/k)$ ($k_m = 4700 \pm 1000$ ), for the $L_d$ and $K_d$ models, respectively. Thus, our estimation indicates that the percolation of $k$-mers on a square lattice is impossible even for a lattice without any defects if $k\gtrapprox 6 \times 10^3$., Comment: Submitted to Physical Review E

It is shown here that concurrence between advection and diffusion in a drying sessile drop of a biological fluid can produce spatial redistribution of albumen and salt. The result gives an explanation for the patterns observed in the dried drops of the biological fluids., 6 pages, 3 figures; submitted to European Physical Journal E

We consider site percolation on a correlated bi-colored simple cubic lattice. The correlated medium is constructed from a strongly alternating bi-colored simple cubic lattice due to anti-site disordering. The percolation threshold is estimated. The cluster size distribution is obtained. A possible application to the double 1:1 perovskites is discussed., 10 pages, 12 figures, Submitted to IJMPC