Search

Psyllium is a viscous, gel forming fibre with properties that have led it to be used for alleviating gastrointestinal discomfort. We have used previously identified fractions of psyllium with differing flow properties. Fraction 1 (F1) forms a non-gelling solution containing rhamnose. galactose, and arabinose. Fraction 2 (F2) forms a fluid-like gel containing mainly xylose and arabinose, Fraction 3 (F3) has almost identical monosaccharide and linkage composition to F2, but forms an insoluble, self-supporting gel. We performed in vitro batch fermentation experiments seeded with human stool. Metabolomics were performed using 1H NMR, and FISH with calcofluor white and direct red 23 were used to visualise the gels after in vitro fermentation of the fractions. The total amount of gas and short chain fatty acid produced was significantly higher for F1, compared to F2 and F3. F3 gas production was significantly lower than F2, but metabolite production between F2 and F3 did not differ. All fractions preferentially lead to the production of propionate instead of butyrate and were produced in the ratio of 58:35:7, 54:38:8, and 61:33:6 (acetate: propionate: butyrate) for F1, F2, and F3 respectively. Microscopy showed differences in how the fractions broke down and demonstrated the localisation of bacteria on the outer edge of each fraction. These results suggest that for these psyllium fractions the structure is a key factor that determines fermentability. Flow properties may play a role in gas production, suggesting directions for future investigation. Isolated fractions may have clinical benefit above that of unrefined psyllium powder aiding in the treatment of gastrointestinal discomfort.

International audience; The nature of the structural and dynamical disorder of the nanoporous organic cocrystal carbamazepine-tartaric acid designed by liquid-assisted grinding is investigated through complementary solid-state NMR, X-ray diffraction, and broadband dielectric spectroscopy experiments combined with molecular dynamics simulations. In this article, we especially highlight that the tartaric acid molecules present in the channel-like cocrystalline architecture show both translational and rotational dynamical disorder. Such a disorder seems only partial since tartaric acid molecules are strongly hydrogen-bonded to the carbamazepine molecules which form the channels, and they thus share with them some order. Tartaric acid species are organized as one-dimensional interrupted single files of molecules weakly hydrogen-bonded between them. Translational dynamics occurs by small hops of about 6–7 Å, consistent with the distance between first neighbors. At short times, it can be described as a single-file diffusion process, while at longer times, the classical diffusion (Fickian) is recovered. Random motions are explained by the presence of several short single files of molecules in the channel instead of just one single file. Rotational dynamics is interpreted as rotational jumps between preferred orientations. It gives rise to a change of the molecular dipole moments orientations, which are detected by dielectric relaxation spectroscopy. Freezing out of the rotational molecular mobility is detected in the temperature range [173–193] K concomitantly in the presence of a kink in the temperature evolution of the crystalline cell volume, which is usually associated with the glass transition phenomenon. It reveals a remarkable link between the molecular mobility of the tartaric acid molecules and the overall crystal anharmonicity. The present findings aim to demonstrate the interest of disordered channel-like cocrystals for investigation of dynamics in nanoconfinement environments.

Targeted colonic drug delivery systems are needed for the treatment of endemic colorectal pathologies, such as Crohn's disease, ulcerative colitis, and colorectal cancer. These drug delivery vehicles are difficult to formulate, as they need to remain structurally intact whilst navigating a wide range of physiological conditions across the upper gastrointestinal tract. In this work we show how starch hydrogel bulk structural and molecular level parameters influence their properties as drug delivery platforms. The in vitro protocols mimic in vivo conditions, accounting for physiological concentrations of gastrointestinal hydrolytic enzymes and salts. The structural changes starch gels undergo along the entire length of the human gastrointestinal tract have been quantified, and related to the materials' drug release kinetics for three different drug molecules, and interactions with the large intestinal microbiota. It has been demonstrated how one can modify their choice of starch in order to fine tune its corresponding hydrogel's pharmacokinetic profile.

Fulvic acid treatment increases yield and nodulation in Medicago sativa, in glasshouse and field experiments. De novo transcriptome analysis shows the up-regulation of early nodulation genes in response to fulvic acid., The use of potential biostimulants is of broad interest in plant science for improving yields. The application of a humic derivative called fulvic acid (FA) may improve forage crop production. FA is an uncharacterized mixture of chemicals and, although it has been reported to increase growth parameters in many species including legumes, its mode of action remains unclear. Previous studies of the action of FA have lacked appropriate controls, and few have included field trials. Here we report yield increases due to FA application in three European Medicago sativa cultivars, in studies which include the appropriate nutritional controls which hitherto have not been used. No significant growth stimulation was seen after FA treatment in grass species in this study at the treatment rate tested. Direct application to bacteria increased Rhizobium growth and, in M. sativa trials, root nodulation was stimulated. RNA transcriptional analysis of FA-treated plants revealed up-regulation of many important early nodulation signalling genes after only 3 d. Experiments in plate, glasshouse, and field environments showed yield increases, providing substantial evidence for the use of FA to benefit M. sativa forage production.

Water quality parameters such as salt content and various pH environments can alter the stability of gels as well as their rheological properties. Here, we investigated the effect of various concentrations of NaCl and different pH environments on the rheological properties of TEMPO-oxidised cellulose nanofibril (OCNF) and starch-based hydrogels. Addition of NaCl caused an increased stiffness of the OCNF:starch (1:1 wt%) blend gels, where salt played an important role in reducing the repulsive OCNF fibrillar interactions. The rheological properties of these hydrogels were unchanged at pH 5.0 to 9.0. However, at lower pH (4.0), the stiffness and viscosity of the OCNF and OCNF:starch gels appeared to increase due to proton-induced fibrillar interactions. In contrast, at higher pH (11.5), syneresis was observed due to the formation of denser and aggregated gel networks. Interactions as well as aggregation behaviour of these hydrogels were explored via ζ-potential measurements. Furthermore, the nanostructure of the OCNF gels was probed using small-angle X-ray scattering (SAXS), where the SAXS patterns showed an increase of slope in the low-q region with increasing salt concentration arising from aggregation due to the screening of the surface charge of the fibrils.

Understanding the fine details of the self‐assembly of building blocks into complex hierarchical structures represents a major challenge en route to the design and preparation of soft‐matter materials with specific properties. Enzymatically synthesised cellodextrins are known to have limited water solubility beyond DP9, a point at which they self‐assemble into particles resembling the antiparallel cellulose II crystalline packing. We have prepared and characterised a series of site‐selectively fluorinated cellodextrins with different degrees of fluorination and substitution patterns by chemoenzymatic synthesis. Bearing in mind the potential disruption of the hydrogen‐bond network of cellulose II, we have prepared and characterised a multiply 6‐fluorinated cellodextrin. In addition, a series of single site‐selectively fluorinated cellodextrins was synthesised to assess the structural impact upon the addition of one fluorine atom per chain. The structural characterisation of these materials at different length scales, combining advanced NMR spectroscopy and microscopy methods, showed that a 6‐fluorinated donor substrate yielded multiply 6‐fluorinated cellodextrin chains that assembled into particles presenting morphological and crystallinity features, and intermolecular interactions, that are unprecedented for cellulose‐like materials., Generating glycomaterials: Enzymatic incorporation of singly and multiply fluorinated glucose residues into cellodextrin chains produces selectively fluorinated cellodextrins that self‐assemble into crystalline materials. Multiply 6‐fluorinated cellodextrin gave rise to an allomorph not previously reported for celluloses or cellulose‐like materials. Our findings highlight the potential of chemoenzymatic synthesis for generating novel glycomaterials of controlled molecular structure and morphology.

Highlights • Produced starch hydrogels through high temperature-pressure gelatinisation. • Employed a range of NMR methods to probe the molecular mobility and water dynamics. • Reported for the first time highly dynamic starch chains in the solvent phase of gels. • Correlated the degree of chain structural mobility with bulk properties. • Revealed a previously unknown level of molecular organisation in starch gels., Hydrogels have a complex, heterogeneous structure and organisation, making them promising candidates for advanced structural and cosmetics applications. Starch is an attractive material for producing hydrogels due to its low cost and biocompatibility, but the structural dynamics of polymer chains within starch hydrogels are not well understood, limiting their development and utilisation. We employed a range of NMR methodologies (CPSP/MAS, HR-MAS, HPDEC and WPT-CP) to probe the molecular mobility and water dynamics within starch hydrogels featuring a wide range of physical properties. The insights from these methods were related to bulk rheological, thermal (DSC) and crystalline (PXRD) properties. We have reported for the first time the presence of highly dynamic starch chains, behaving as solvated moieties existing in the liquid component of hydrogel systems. We have correlated the chains’ degree of structural mobility with macroscopic properties of the bulk systems, providing new insights into the structure-function relationships governing hydrogel assemblies.

Elevated postprandial glucose (PPG) is a significant risk factor for non-communicable diseases globally. Currently, there is a limited understanding of how starch structures within a carbohydrate-rich food matrix interact with the gut luminal environment to control PPG. Here, we use pea seeds (Pisum sativum) and pea flour, derived from two near-identical pea genotypes (BC1/19RR and BC1/19rr) differing primarily in the type of starch accumulated, to explore the contribution of starch structure, food matrix and intestinal environment to PPG. Using stable isotope 13C-labelled pea seeds, coupled with synchronous gastric, duodenal and plasma sampling in vivo, we demonstrate that maintenance of cell structure and changes in starch morphology are closely related to lower glucose availability in the small intestine, resulting in acutely lower PPG and promotion of changes in the gut bacterial composition associated with long-term metabolic health improvements. Seeds, flour and food products derived from two near-identical pea genotypes (BC1/19RR and BC1/19rr) were utilized in a series of in vitro, ex vivo and in vivo studies to explore the contribution of starch structure, food matrix and intestinal environment to postprandial glycaemia.

The titratable acidity, alkalinity, and carboxylate content are fundamental properties required for the understanding of aqueous chemical systems. Here, we present a set of new methods that allow these properties to be determined directly by 1H NMR without the labor, cost, and sample quantity associated with running separate potentiometric or conductometric titrations. Our methods require only the measurement of the pH-sensitive 1H chemical shifts of indicator molecules and do not require the tedious titration of reagents into a sample. To determine the titratable acidity, an excess of 2-methylimidazole (2MI) is added to a sample and the quantity of protons absorbed by 2MI is determined from its 1H chemical shifts. The titratable alkalinity of a sample can be similarly determined using acetic acid. To determine the concentration of deprotonated carboxylates, a sample is acidified with HCl, and the quantity of H+ absorbed is determined from the 1H chemical shift of methylphosphonic acid. We validate our methods by demonstrating the measurement of the acidity of fruit-flavored drinks, the alkalinity of tap water, and the carboxylate content of nanocellulose dispersions.

Surface hydrophobization of cellulose nanomaterials has been used in the development of nanofiller-reinforced polymer composites and formulations based on Pickering emulsions. Despite the well-known effect of hydrophobic domains on self-assembly or association of water-soluble polymer amphiphiles, very few studies have addressed the behavior of hydrophobized cellulose nanomaterials in aqueous media. In this study, we investigate the properties of hydrophobized cellulose nanocrystals (CNCs) and their self-assembly and amphiphilic properties in suspensions and gels. CNCs of different hydrophobicity were synthesized from sulfated CNCs by coupling primary alkylamines of different alkyl chain lengths (6, 8, and 12 carbon atoms). The synthetic route permitted the retention of surface charge, ensuring good colloidal stability of hydrophobized CNCs in aqueous suspensions. We compare surface properties (surface charge, ζ potential), hydrophobicity (water contact angle, microenvironment probing using pyrene fluorescence emission), and surface activity (tensiometry) of different hydrophobized CNCs and hydrophilic CNCs. Association of hydrophobized CNCs driven by hydrophobic effects is confirmed by X-ray scattering (SAXS) and autofluorescent spectroscopy experiments. As a result of CNC association, CNC suspensions/gels can be produced with a wide range of rheological properties depending on the hydrophobic/hydrophilic balance. In particular, sol–gel transitions for hydrophobized CNCs occur at lower concentrations than hydrophilic CNCs, and more robust gels are formed by hydrophobized CNCs. Our work illustrates that amphiphilic CNCs can complement associative polymers as modifiers of rheological properties of water-based systems.

Bacterial cellulose (BC) consists of a complex three-dimensional organization of ultrafine fibers which provide unique material properties such as softness, biocompatibility, and water-retention ability, of key importance for biomedical applications. However, there is a poor understanding of the molecular features modulating the macroscopic properties of BC gels. We have examined chemically pure BC hydrogels and composites with arabinoxylan (BC-AX), xyloglucan (BC-XG), and high molecular weight mixed-linkage glucan (BC-MLG). Atomic force microscopy showed that MLG greatly reduced the mechanical stiffness of BC gels, while XG and AX did not exert a significant effect. A combination of advanced solid-state NMR methods allowed us to characterize the structure of BC ribbons at ultra-high resolution and to monitor local mobility and water interactions. This has enabled us to unravel the effect of AX, XG, and MLG on the short-range order, mobility, and hydration of BC fibers. Results show that BC-XG hydrogels present BC fibrils of increased surface area, which allows BC-XG gels to hold higher amounts of bound water. We report for the first time that the presence of high molecular weight MLG reduces the density of clusters of BC fibrils and dramatically increases water interactions with BC. Our data supports two key molecular features determining the reduced stiffness of BC-MLG hydrogels, that is, (i) the adsorption of MLG on the surface of BC fibrils precluding the formation of a dense network and (ii) the preorganization of bound water by MLG. Hence, we have produced and fully characterized BC-MLG hydrogels with novel properties which could be potentially employed as renewable materials for applications requiring high water retention capacity (e.g. personal hygiene products).

Utilization of reversible non-covalent interactions is a versatile design strategy for the development of stimuli responsive soft materials. In this study, hydrophobic interactions were harnessed to assemble water-soluble macromolecules and nanoparticles into a transient hybrid network forming thermosensitive hydrogels with tunable rheological properties. Hybrid hydrogels were built of biopolymer derived components: cellulose nanocrystals (CNCs), nanoparticles of high aspect ratio, and hydroxypropyl methylcellulose (HPMC). To enable polymer/CNC assembly via hydrophobic interactions, the surface of highly hydrophilic CNCs was modified by binding octyl moieties (octyl-CNCs). The amphiphilicity of octyl-CNCs was confirmed by surface tension measurements. The molecular and particulate amphiphiles assemble into hybrid networks, which result in stiffer and stronger hydrogels compared to HPMC hydrogels and hydrogels reinforced with hydrophilic CNCs. Hybrid hydrogels retain the ability of HPMC hydrogels to flow under applied shear stress. However, significantly higher viscosity was achieved for HPMC/octyl-CNCs compared with HPMC/CNCs hydrogels. The inherent thermal response of rheological properties of HPMC hydrogels was further amplified in combination with octyl-CNCs due to temperature-induced polymer/nanoparticle association via hydrophobic interactions. Saturation transfer difference NMR spectroscopy demonstrated the growth of network-bound water with an increase in temperature, which correlates with the increase of stiffness and viscosity of hydrogels upon heating. Rheological properties of these hybrid hydrogels are defined by the content of the soluble polymer and the CNCs, and it is shown that they can be finely adjusted for a required application.

International audience; Zwitterionic cellulose nanofibrils (ZCNFs) with an isoelectric point of 3.4 were obtained by grafting glycidyltrimethylammonium chloride onto TEMPO/NaBr/NaOCl-oxidised cellulose nanofibrils. The ZCNF aqueous dispersions were characterized via transmission electron microscopy, rheology and small angle neutron scattering, revealing a fibril-bundle structure with pronounced aggregation at pH 7. Surfactants were successfully employed to tune the stability of the ZCNF dispersions. Upon addition of the anionic surfactant, sodium dodecyl sulfate, the ZCNF dispersion shows individualized fibrils due to electrostatic stabilization. In contrast, upon addition of the cationic species dodecyltrimethylammonium bromide, the dispersion undergoes charge neutralization, leading to more pronounced flocculation.

Hybrid polymer coated silica nanoparticles (NPs) were synthesized using low temperature graft (co)polymerization of trimethoxysilane propyl methacrylate (MPTS) initiated by surface-active oligoperoxide metal complex (OMC) in aqueous media. These NPs were characterized by means of kinetic, solid-state NMR, TEM and FTIR techniques. Two processes, namely the radical graft-copolymerization due to presence of double bonds and 3D polycondensation provided by the intra- or/and intermolecular interaction of organosilicic fragments, occurred simultaneously. The relative contribution of the reactions depending on initiator concentration and pH value leading to the formation of low cured polydisperse microparticles or OMC coated SiO2 NPs of controlled curing degree was studied. The availability of free-radical forming peroxide fragments on the surface of SiO2 NPs provides an opportunity for seeded polymerization leading to the formation of the functional polymer coated NPs with controlled particle structure, size, and functionality. Encapsulation of the luminescent dye (Rhodamine 6G) in SiO2 core of functionalized NPs provided a noticeable increase in their resistance to photo-bleaching and improved biocompatibility. These luminescent NPs were not only attached to murine leukemia L1210 cells but also tolerated by the mammalian cells. Their potential use for labeling of the mammalian cells is considered.

Stiff, elastic, viscous shear thinning aqueous gels are formed upon dispersion of low weight percent concentrations of cationically modified cellulose nanofibrils (CCNF) in water. CCNF hydrogels produced from cellulose modified with glycidyltrimethylammonium chloride, with degree of substitution (DS) in the range 10.6(3)–23.0(9)%, were characterised using NMR spectroscopy, rheology and small angle neutron scattering (SANS) to probe the fundamental form and dimensions of the CCNF and to reveal interfibrillar interactions leading to gelation. As DS increased CCNF became more rigid as evidenced by longer Kuhn lengths, 18–30 nm, derived from fitting of SANS data to an elliptical cross-section, cylinder model. Furthermore, apparent changes in CCNF cross-section dimensions suggested an “unravelling” of initially twisted fibrils into more flattened ribbon-like forms. Increases in elastic modulus (7.9–62.5 Pa) were detected with increased DS and 1H solution-state NMR T1 relaxation times of the introduced surface –N+(CH3)3 groups were found to be longer in hydrogels with lower DS, reflecting the greater flexibility of the low DS CCNF. This is the first time that such correlation between DS and fibrillar form and stiffness has been reported for these potentially useful rheology modifiers derived from renewable cellulose.

Phenylalanine (Phe) is an amino acid of great interest as coupling of an aromatic group with a chiral hydrophilic region imparts a number of unique properties. Recently there has been an increased interest in the crystalline and gel forms of this compound, part as a result of the complex and undetermined structures of the resulting materials and the relationship of the solid forms of Phe with the disease phenylketonuria. In this report, we highlight the relationship between gelation, crystallization, and the dynamics of self-assembly processes of Phe. We do this by describing the gelation of the amino acid, the gel to crystal relationship, crystal structure predictions for this relatively simple compound, and the dynamics of assembly as determined by NMR in both water and dimethyl sulfoxide. This will provide guidance to future research into Phe assemblies, possible treatments for phenylketonuria, and diseases related to formation of amyloid-like fibers.

Correction for ‘Substituent interference on supramolecular assembly in urea gelators: synthesis, structure prediction and NMR’ by Francesca Piana et al., Soft Matter, 2016, 12, 4034–4043.

Eighteen N-aryl-N'-alkyl urea gelators were synthesised in order to understand the effect of head substituents on gelation performance. Minimum gelation concentration values obtained from gel formation studies were used to rank the compounds and revealed the remarkable performance of 4-methoxyphenyl urea gelator 15 in comparison to 4-nitrophenyl analogue 14, which could not be simply ascribed to substituent effects on the hydrogen bonding capabilities of the urea protons. Crystal structure prediction calculations indicated alternative low energy hydrogen bonding arrangements between the nitro group and urea protons in gelator 14, which were supported experimentally by NMR spectroscopy. As a consequence, it was possible to relate the observed differences to interference of the head substituents with the urea tape motif, disrupting the order of supramolecular packing. The combination of unbiased structure prediction calculations with NMR is proposed as a powerful approach to investigate the supramolecular arrangement in gel fibres and help understand the relationships between molecular structure and gel formation.

At elevated temperatures, the ionic liquid precursor (ILP) tetrabutylammonium hydroxide reacts with zinc acetate and the glass wall of the reaction vessel. While the reaction of OH- with the glass wall is not surprising as such and could be considered a failed experiment, the resulting materials are interesting for a variety of applications. If done on purpose and under controlled conditions, the reaction with the glass wall results in uniform, well-defined hemimorphite Zn4Si2O7(OH)2·nH2O and willemite Zn2SiO4 microcrystals and films. Their morphology can be adjusted by variation of the reaction time and reaction temperature. The hemimorphite can be transformed to Zn2SiO4 via calcination. The process is therefore a viable approach for the fabrication of porous films on glass surfaces with potential applications as catalyst support, among others.

Control over the surface functionality and microporosity in conjugated microporous polymers (CMPs) has been achieved by the post-synthetic modification of amines into amides of with different alkyl chains, one of which was chiral. The surface areas, pore volumes, carbon dioxide uptakes and isosteric heat of adsorption for carbon dioxide can be rationally tuned.

We discuss in detail the mechanism of formation of a highly microporous polymer, CMP-1, formed mainly via Sonogashira–Hagihara coupling. We demonstrate how the microporosity evolves with time, and discuss the importance of alkyne homo-coupling on the microporosity.

Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG geförderten) Allianz- bzw. Nationallizenz frei zugänglich. This publication is with permission of the rights owner freely accessible due to an Alliance licence and a national licence (funded by the DFG, German Research Foundation) respectively. Poly(triazine imide)—a 2D layered network—can be obtained as an intercalation compound with halides from the ionothermal condensation of dicyandiamide in a eutectic salt melt. The gallery height of the intercalated material can be tuned via the composition of the eutectic melt and by post-synthetic modification. Here, we report the synthesis of poly(triazine imide) with intercalated bromide ions (PTI/Br) from a lithium bromide and potassium bromide salt melt. PTI/Br has a hexagonal unit-cell (P63cm (no. 185); a = 8.500390(68) Å, c = 7.04483(17) Å) that contains two layers of imide-bridged triazine (C3N3) units stacked in an AB-fashion as corroborated by solid-state NMR, FTIR spectroscopy and high-resolution TEM. By comparison with a recently reported material PTI/Li+Cl−, prepared from a LiCl/KCl eutectic, the layer-stacking distance in the analogous bromide material was expanded from 3.38 Å to 3.52 Å – an exceptionally large spacing for an aromatic, discotic system (cf. graphite 3.35 Å). Subsequent treatment of PTI/Br with concentrated ammonium fluoride yields poly(triazine imide) with intercalated fluoride ions (PTI/F) (P63/m (no. 176); a = 8.4212(4) Å, c = 6.6381(5) Å) as a statistical phase mix with PTI/Br. Fluoride intercalation leads to a contraction of the gallery height to 3.32 Å, demonstrating that the gallery height is synthetically tuneable in these materials.