Search

Dried blood spots (DBSs) are formed by collecting a small sample of blood on specialized filter paper and allowing it to dry naturally. Various domains of life sciences and drug research extensively use DBSs as a sampling technique. The “Hematocrit (Ht) effect” affects assay bias, and several strategies have been put forth to deal with it, including the correction of quantified concentrations using an appropriate correction factor. The approach was previously applied, following the utilization of an image processing algorithm developed in Matlab® to derive a reliable equation correlating DBS areas to Ht% values. The present work looks more closely at the application of image analysis to the evaluation of Ht in DBS samples. Utilizing image analysis software, DBS samples with known Ht values were processed. Preparation of cards has followed a previously developed protocol for the appropriate formation of uniform area DBSs, irrespective of Ht. The resulting areas showed close resemblance to the respective theoretical areas calculated by applying the correlation equation. Following that, the equation was utilized to determine the Ht values for each sample, and a comprehensive comparison of measured versus calculated Ht was carried out using various statistical approaches for method comparison. The results demonstrated a strong correlation, suggesting the method’s viability in estimating Ht for unknown DBS samples.

Chromatograms with overlapping peaks and a baseline rise or upset constitute a great challenge for analysts. Such a case regarding the analysis of bupropion hydrochloride and its 5 impurities in a tablet formulation was used as a model. A baseline correction technique for liquid chromatography coupled with diode array detection is described by using Rstudio. The asymmetry least squares (ALS) algorithm was used as implemented in the “baseline” package, with parameters lambda and p set to 4 and 0.05, respectively. Peak deconvolution and subsequent integration and area quantification were accomplished through Fytik software. Chromatographic data from the validation procedure were utilized to demonstrate the feasibility of the suggested method and whether this correction affects the outcome of the validation study. Finally, a robustness study was carried out in order to shed light on the factors that have a more significant influence on the baseline correction, showing the reliability of this procedure through random changes in its parameters.

Cetrimide (CE) is a quaternary ammonium compound and a cationic surfactant, which can be used as an antiseptic and preservative in various formulations. Antiseptic solutions of Cetrimide are available in combination with Chlorhexidine Gluconate (CHG) for external use. Chlorhexidine is a biguanide with high microbicidal activity and is widely known as a skin disinfectant. The present work displays the development and validation of an RP-HPLC isocratic method for the simultaneous determination of CE and CHG. The method consists of a Hypersil® SAS C1 (4.6 × 250 mm) 5 μm column, with a mobile phase of 85%/15% v/v MeOH-NaH2PO4·H2O, aqueous solution. In addition, 0.2% of triethylamine (Et3N) was added to the buffer for the confrontation of peak tailing, and then the pH was adjusted to 3.0 with ortho-phosphoric acid (H3PO4). The flow rate was set at 1 mL/min, and adequate detection was achieved with a diode array detector (PDA) at 205 nm. The method was successfully validated according to ICH guidelines for specificity, linearity, accuracy, precision and stability for sample and standard solutions. In addition, the robustness of the method was evaluated through statistical and graphical analysis, using a fractional factorial experimental design.

Dried blood spot (DBS) microsampling is extensively employed in newborn screening (NBS) and neonatal studies. However, the impact of variable neonatal hematocrit (Ht) values on the results can be a source of analytical error, and the use of fixed Ht for calibration (Htcal) is not representative of all neonatal subpopulations. A computational approach based on neonatal demographics was developed and implemented in R® language to propose a strategy using correction factors to address the Ht effect in neonatal DBS partial-spot assays. A rational “tolerance level” was proposed for the Ht effect contribution to the total analytical error and a safe Ht range for neonatal samples, where the correction of concentrations can be omitted. Furthermore, an “alert zone” for a false positive or negative result in NBS was proposed, where the Ht effect has to be considered. Results point toward the use of Htcal values closely representative of populations under analysis and an acceptable level of percentage relative error can be attributed to the Ht effect, diminishing the probability of correction. Overall, the impact of the Ht effect on neonatal studies is important and future work may further investigate this parameter, correlated to other clinical variables potentially affecting results.

Migration studies are one of the few domains of pharmaceutical analysis employing wide-scope screening methodologies. The studies involve the detection of contaminants within pharmaceutical products that arise from the interaction between the formulation and materials. Requiring both qualitative and quantitative data, the studies are conducted using Liquid Chromatography or Gas Chromatography coupled to a mass spectrometer (LC-MS and GC-MS). While mass spectrometry allows wide-scope analyte detection and identification at the very low Analytical Evaluation Threshold (AET) levels used in these studies, MS detectors are far from “universal response” detectors. Regulation brings the application of uncertainty factors into the picture to limit the risk of potential analytes detected escaping report and further evaluation; however, whether the application of a default value can cover any or all relevant applications is still debatable. The current study evaluated the response of species usually detected in migration studies, generating a suitable representative sample, analyzing said species, and creating a strategy and evaluation mechanism for acceptable classification of the detected species. Incorporating novel methodologies, i.e., Design of Experiments (DoE) for Design Space generation, the LC-MS-based methodology is also evaluated for its robustness in changes performed.

Background: Free carnitine (C0) and short chain acylcarnitine (SCA) blood concentrations play a significant role in fatty acid oxidation process during the first days of life. The aim of this study was to demonstrate C0 and SCA concentrations in Dried Blood Spots (DBS) of full term breastfed infants in relation to their birth weight (BW) perinatally. Methods: Breastfed full term infants (n = 12,000, 6000 males, 6000 females) with BW 2000–4000 g were divided into 4 equal groups: Group A, 2000–2500 g, B 2500–3000 g, C 3000–3500 g and D 3500–4000 g. Blood samples in the form of DBS were collected on the 3rd day of life and analyzed via a liquid chromatography tandem mass spectrometry (LC-MS/MS) protocol. Results: BW-related C0 and SCAs were found as follows: C0 was determined to be statistically significantly higher in group A (BW 2000–2500 g) in both males and females. Lower acetylcarnitine (C2) and hydroxybutyrylcarnitine (C4OH) blood concentrations were detected in group A of both sexes, whereas butyrylcarnitine (C4) concentrations were found to be lower in the same group of males only. Furthermore, high concentrations of C2 and C4OH were shown in group D (BW 3500–4000 g) in both sexes. SCA sum of means ± SD values in males and females of group A were statistically significantly lower as compared to other study groups. Conclusion: Due to the number of the samples, data from this study could be applied as neonatal screening reference values for full term breastfed newborns in relation to their birth weight.

A novel chaotropic chromatography method for the quantitative determination of bupropion and its impurities, following analytical quality-by-design (AQbD) principles, is presented. The analytical target profile (ATP) was defined on the basis of the efficient separation and reliable determination of bupropion and its five impurities in tablets. Preliminary experiments revealed the need for the addition of a gradient elution part. A screening fractional factorial experimental design was employed to select the critical method parameters (CMPs) and a Box–Behnken design (BBD) was utilized to investigate their influence on predefined critical method attributes (CMAs). In order to compute the design space (DS), where CMPs meet predefined acceptance limits with a high level of probability (π ≥ 85%), Monte Carlo simulations were performed. The working point selected from the DS corresponded to the following conditions: 37.5% acetonitrile at the start of the gradient program (up to 70% at the end of the gradient program), 45 mM of potassium hexafluorophosphate in the water phase, and the start of the linear gradient step in the gradient program at 10 min. The method was validated according to ICH guidelines and applied to the analysis of Wellbutrin® tablets containing bupropion hydrochloride.

A simple, precise, and cost-effective reverse phase ion pair chromatographic (RP-IP-HPLC) method was developed and validated for the determination of Ephedrine Hydrochloride in a nasal ointment. A simple and fast extraction protocol was developed for the effective recovery of the analyte, and for this purpose, Bromhexine Hydrochloride was used as the internal standard. The mobile phase consisted of MeOH, Sodium Lauryl Sulfate (SLS) 49.8 mM, triethylamine (ET3N) in the ratio of 65:34.6:0.4%, respectively, with pH = 2.20. The detection of the compounds was carried out at 206 nm, and we used a PDA detector. A short run time was achieved with retention times of 6.3 min and 9.8 min for ephedrine hydrochloride and the internal standard, respectively. The proposed method was validated according to ICH guidelines. Linearity was confirmed in the range of 50–150 μg/mL. Recoveries results were within the range of 98–102% and precision < 2% for the analyte in spiked blank matrix. Robustness testing was conducted via a fractional factorial experimental design. The method was found to fulfill the required specifications for specificity and stability for both standard solutions and samples, as well and applied to the determination of ephedrine hydrochloride in nasal ointments produced by the Greek Military Pharmaceutical Laboratories.

Quantitation of chromophore-free analytes is always a challenge. To this purpose, derivatization of the analyte constitutes a common strategy, leading to a product with a strong signal. In the current study, a novel xanthone analogue was utilized for the first time for the derivatization of pregabalin, a model analyte with a primary amine moiety that lacks a chromophore. The fact that only the xanthene-based derivative, formed after the derivatization reaction fluoresces, enables avoiding its chromatographic separation from the reagent and thus reducing the analysis time of a series of samples in 1–2 min via a plate reader. The reaction conditions were optimized via a central composite design (CCD), with fluorescence signal as the measure of the yield. The following factors that affect the derivatization reaction were chosen: (a) temperature, (b) reaction time, and (c) triethylamine solution volume used to drive the reaction to completion. After the identification of the optimal conditions, the method was validated according to ICH guidelines, using a fluorescence plate reader for signal measurement (λex = 540, λem = 615 nm). Finally, the newly developed high-throughput method was applied to the determination of drug content in pregabalin bulk.

A reversed-phase high-pressure liquid chromatography (RP-HPLC) method was developed and subsequently validated for the simultaneous determination of butamirate citrate (BC) and benzoic acid (BA) in cough syrup. The separation was performed employing a cyanopropyl column with a mobile phase consisting of 50%/50% v/v MeOH/NaH2PO4 * H2O 50 mM aqueous solution pH = 3.0. The quantitation was achieved with a diode array detector (DAD) at 210 nm. The method demonstrated a congenitally satisfactory separation, yet the acquired peaks were asymmetrical. This effect was eliminated by using 1% triethylamine in the buffer solution as a silanol blocker. In addition, the method was found to unequivocally assess the target analytes in the sample matrix and fulfilled the required specifications in relevance to specificity, linearity, accuracy, precision and stability of both the standard solutions and of the sample solutions. Lastly, an experimental design was designed in order to assess the robustness of the proposed assay. To this purpose, a graphical and a statistical approach were utilized and compared to identify the factors that should be strictly controlled during each execution of the method.