Search

This study conducted 3D numerical simulations to investigate the impact of combustion chamber diameter on the combustion characteristics of liquid kerosene scramjet rotating detonation under high Mach number flow conditions (Ma6/28 km). After ignition, a local hotspot near the contact surface between the combustion product and fresh reactant facilitates the generation of new detonation wave heads, resulting in a co-directional multi-wave mode in the detonation combustion flow field. The higher total temperature of the incoming flow restricts the accumulation of a substantial fuel gas layer in the axial direction of the combustion chamber, resulting in a smaller fuel distribution area and a lower wave head. Increasing the inner diameter of the combustion chamber leads to an increase in the number of wave heads but a decrease in overall height. Specifically, when using diameters of 125 and 150 mm, we observed significant periodic low-frequency oscillations in the peak pressure of the detonation wave during stable propagation. The specific impulse of the fuel does not vary significantly across different combustion chamber diameters. However, when the inner diameter is 75 mm, periodic oscillations occur, which reduce thrust stability. These findings provide valuable insights into optimizing combustion chamber design and improving the efficiency and stability of liquid kerosene scramjet rotating detonation propulsion systems under high Mach number flow conditions. [ABSTRACT FROM AUTHOR]

The feasibility of using preheated kerosene and pre-evaporation to assist in liquid kerosene detonation ignition and self-sustaining combustion under near-ramjet limit conditions was investigated. Additionally, the detonation decoupling and self-sustaining mechanisms were analyzed in depth. Owing to the forced heat transfer effect of supersonic flow on kerosene droplets, self-sustaining detonation combustion could not be achieved using preheated kerosene alone. The detonation wave was still decoupled due to the forced heat exchange effect of the cold kerosene droplets on the detonation wave, even if the distribution of C12H23 reached the detonation conditions through the pre-evaporation of fuel. [ABSTRACT FROM AUTHOR]

During the COVID-19 pandemic, panic buying, price inflation, and the pollution of production processes led to economic and social unrest. In response to the current situation, the current research takes less account of the subjective perception of public panic buying and the lack of reference to the reality of effective governance. First, this paper uses prospect theory to portray the public's perceived value of goods in panic buying and non-panic buying situations. Then, drawing on the experience of effective governance in China, a tripartite evolutionary game model of local government, the public and green smart supply chain enterprises is constructed under the reward and punishment mechanism of the central government. Then, this paper analyzes the strategic choices of each game player and the stability of the system equilibrium. The structure of the study suggests the following. (1) Improving local government subsidies and penalties, the cost of positive response and the probability of response can lead to an evolutionary direction where the public chooses not to panic buy and green smart supply chain enterprises choose to ensure a balance between supply and demand and increase pollution control in the production process. (2) Our study yields three effective combinations of evolutionary strategies, of which an ideal combination of evolutionary strategies exists. Non-ideal evolutionary strategy combinations can occur due to improper incentives and penalties of local governments and misallocation of limited resources. However, we find four paths that can transform the non-ideal evolutionary strategy combination into an ideal evolutionary strategy combination. (3) The central government's reward and punishment mechanism is an important tool to stabilize the tripartite strategy, but the central government cannot achieve effective governance by replacing incentives with punishment. [ABSTRACT FROM AUTHOR]

Two-phase rotating detonation ramjets are considered to be suitable for aerospace applications due to their high thermodynamic cycle efficiency. These engines have an extremely complex internal flow field, in which the liquid fuel undergoes physical and chemical processes such as fragmentation, evaporation, mixing, and combustion; these processes also interact with detonation waves that have significant gradients. This makes it difficult to simulate a three-dimensional (3D) full-process rotating detonation combustion chamber. Here, based on the Euler–Lagrangian simulation method, a 3D numerical combustion chamber was simulated using kinetic theory and the constant thermal physical property parameter (TPPP) calculation method. The accuracy of these methods was then compared with the existing experimental results and theoretical values. Calculating the TPPPs using kinetic theory brought about a relatively high-pressure peak and detonation wave temperature; the detonation wave profile was also finer and more precise. The detonation wave propagation velocity of the two-phase detonation is estimated to be about 60% of the theoretical gas-phase CJ velocity. The calculation method of physical parameters has relatively little influence on the engine's operating frequency and the detonation wave's propagation velocity but has a more significant influence on the peak pressure. Constant TPPPs can be used when the Kelvin–Helmholtz–Rayleigh–Taylor model with insufficient precision is used to consider the breakup of droplets and leads to the acceleration of the propagation speed of two-phase detonation waves. [ABSTRACT FROM AUTHOR]

Two-phase rotating detonation ramjets are considered to be suitable for aerospace applications due to their high thermodynamic cycle efficiency. These engines have an extremely complex internal flow field, in which the liquid fuel undergoes physical and chemical processes such as fragmentation, evaporation, mixing, and combustion; these processes also interact with detonation waves that have significant gradients. This makes it difficult to simulate a three-dimensional (3D) full-process rotating detonation combustion chamber. Here, based on the Euler–Lagrangian simulation method, a 3D numerical combustion chamber was simulated using kinetic theory and the constant thermal physical property parameter (TPPP) calculation method. The accuracy of these methods was then compared with the existing experimental results and theoretical values. Calculating the TPPPs using kinetic theory brought about a relatively high-pressure peak and detonation wave temperature; the detonation wave profile was also finer and more precise. The detonation wave propagation velocity of the two-phase detonation is estimated to be about 60% of the theoretical gas-phase CJ velocity. The calculation method of physical parameters has relatively little influence on the engine's operating frequency and the detonation wave's propagation velocity but has a more significant influence on the peak pressure. Constant TPPPs can be used when the Kelvin–Helmholtz–Rayleigh–Taylor model with insufficient precision is used to consider the breakup of droplets and leads to the acceleration of the propagation speed of two-phase detonation waves. [ABSTRACT FROM AUTHOR]

The magnetic field is extremely important for understanding the properties of the solar corona. However, there are still difficulties in the direct measurement of the coronal magnetic field. The magnetic-field-induced transition (MIT) in Fe x, appearing in coronal spectra, was discovered to have prospective applications in coronal magnetic field measurements. In this work, we obtained the extreme ultraviolet spectra of Fe x in the wavelength range of 174â€"267 Ă... in the Shanghai High-temperature Superconducting Electron Beam Ion Trap, and examined the effect of MIT in Fe x by measuring the line ratios between 257.262 Ă... and the reference line of 226.31 Ă... (257/226) at different magnetic field strengths for the first time. The electron density that may affect the 257/226 value was also obtained experimentally and verified by comparing the density-sensitive line ratio (175.266 Ă.../174.534 Ă...) measurements with the theoretical predictions, and there was good agreement between them. The energy separation between the two levels of 3s23p43d 4 D 5/2 and 3s23p43d 4 D 7/2, one of the most critical parameters for determining the MIT rate, was obtained by analyzing the simulated line ratios of 257/226 with the experimental values at the given electron densities and magnetic fields. Possible reasons that may have led to the difference between the obtained energy splitting and the recommended value in previous works are discussed. Magnetic field response curves for the 257/226 value were calculated and compared to the experimental results, which is necessary for future MIT diagnostics. [ABSTRACT FROM AUTHOR]

Vegetation restoration is assumed to enhance carbon (C) sequestration in terrestrial ecosystems, where plant producers and microbial decomposers play key roles in soil C cycling. However, it is not clear how the nutrient limitation patterns of plants and soil microbes might change during vegetation restoration. We investigated the nutrient limitations of the plant and microbial communities along a natural vegetation restoration chronosequence (1, 8, 16, 31, and 50 years) following farmland abandonment in Qinling Mountains, China, and assessed their relationships with soil factors. The result showed that following natural vegetation restoration, the nitrogen (N) limitation of plant and microbial communities was alleviated significantly, and thereafter, it began to shift to phosphorus (P) limitation at a later stage. Plants showed P limitation 50 years after restoration, while microbial P limitation appeared 31 years later. The changes in plant nutrient limitation were consistent with those in microbial nutrient limitation, but soil microbes were limited by P earlier than plants. Random forest model and partial least squares path modeling revealed that soil nutrient stoichiometry, especially soil C:N ratio, explained more variations in plant and microbial nutrient limitation. Our study demonstrates that the imbalanced soil C:N ratio may determine the soil microbial metabolic limitation and further mediate the variation in plant nutrient limitation during natural vegetation restoration, which provides important insights into the link between metabolic limitation for microbes and nutrient limitation for plants during vegetation restoration to improve our understanding of soil C turnover in temperate forest ecosystems. [ABSTRACT FROM AUTHOR]

• Soil microbes were co-limited by the C and P during oak forest restoration, but these limitations tended to decrease gradually. • Rhizosphere soil microorganisms were subject to relatively strong C limitation and weak P limitation compared with those in bulk soil. • Microbial C and P limitation in the rhizosphere soil were mainly dependent on the DOC and Olsen−P. • An increase in the soil water content decreased the relative P limitation for the rhizosphere microbial community. Microbial metabolism changes in soil systems along a vegetation restoration gradient have attracted considerable attention; however, the differences in microbial metabolic limitations between the rhizosphere and bulk soil and their drivers during natural secondary forest restoration after disturbance have rarely been investigated. Here, we used multiple methods based on extracellular enzymatic stoichiometry to examine the microbial metabolic limitations in the rhizosphere and bulk soils along with a clear-cut oak (Quercus aliena var. acuteserrata) forest restoration over 58 years in the Qinling Mountains, China. Overall, the microbial metabolisms in both rhizosphere and bulk soils were co-limited by the availability of soil carbon (C) and phosphorus (P), and the limitations tended to decrease during restoration. Rhizosphere soil microorganisms were subject to relatively strong C limitation and weak P limitation compared with those in bulk soil. Microbial C and P limitations in the bulk soil were regulated by the nutrient ratios, and those in the rhizosphere soil were mainly dependent on the available nutrients mediated by soil moisture. Our results indicate that variations in the soil nutrients caused by oak forest restoration and water differences caused by the rhizosphere effect regulated microbial C and P metabolism in the rhizosphere and bulk soils. This study highlights the microbial metabolism difference between rhizosphere and bulk soil and its drivers during oak forest restoration and provides insights into the microbial resource limitation, nutrient cycling, and rhizosphere processes in the natural secondary forests after clear-cutting. [ABSTRACT FROM AUTHOR]

With the rapid development of subway systems, the negative environmental impacts of vibration induced by subways has gradually become a research hotspot. For the purpose of developing predictive models of vibration and designing effective vibration mitigation systems, continuous field dynamic measurements were conducted simultaneously in a subway tunnel, ground, and building in eastern China, the most prosperous region in China. The characteristics of vibration transmission and attenuation induced by subway were analyzed by statistical analysis of large amounts of measurement data. The results showed that most prominent and visible attenuation of vibration is from the track to the ballast bed in the tunnel, where the ground-borne vibration would quickly decrease exponentially with distance. The results also showed that the measured attenuation value of indoor vibration was approximate 0.76 dB on average between each floor. Moreover, the decay ratio of the vibration increased with the increase in the frequency range. Based on these findings, construction gauge of 20–25 m outside of the tunnel is recommended. In addition, reducing the vibration source excitation intensity is the most effective vibration isolation method, especially by track structural transformation. [ABSTRACT FROM AUTHOR]

Abstract: Introduction: Novel technetium-labeled ligands, 99mTc-NCAM and 99mTc-NHAM were developed from the N-methyl-d-aspartate (NMDA) receptor agonist memantine as a lead compound by coupling with N2S2. This study evaluated the binding affinity and specificity of the ligands for the NMDA receptor. Methods: Ligand biodistribution and uptake specificity in the brain were investigated in mice. Binding affinity and specificity were determined by radioligand receptor binding assay. Three antagonists were used for competitive binding analysis. In addition, uptake of the complexes into SH-SY5Y nerve cells was evaluated. Results: The radiochemical purity of 99mTc-labeled ligands was more than 95%. Analysis of brain regional uptake showed higher concentration in the frontal lobe and specific uptake in the hippocampus. 99mTc-NCAM reached a higher target to nontarget ratio than 99mTc-NHAM. The results indicated that 99mTc-NCAM bound to a single site on the NMDA receptor with a K d of 701.21 nmol/l and a B max of 62.47 nmol/mg. Specific inhibitors of the NMDA receptor, ketamine and dizocilpine, but not the dopamine D2 and 5HT1A receptor partial agonist aripiprazole, inhibited specific binding of 99mTc-NCAM to the NMDA receptor. Cell physiology experiments showed that NCAM can increase the viability of SH-SY5Y cells after glutamate-induced injury. Conclusions: The new radioligand 99mTc-NCAM has good affinity for and specific binding to the NMDA receptor, and easily crosses the blood–brain barrier; suggesting that it might be a potentially useful tracer for NMDA receptor expression. [Copyright &y& Elsevier]

Introduction: Novel technetium-labeled ligands, (99m)Tc-NCAM and (99m)Tc-NHAM were developed from the N-methyl-d-aspartate (NMDA) receptor agonist memantine as a lead compound by coupling with N(2)S(2). This study evaluated the binding affinity and specificity of the ligands for the NMDA receptor., Methods: Ligand biodistribution and uptake specificity in the brain were investigated in mice. Binding affinity and specificity were determined by radioligand receptor binding assay. Three antagonists were used for competitive binding analysis. In addition, uptake of the complexes into SH-SY5Y nerve cells was evaluated., Results: The radiochemical purity of (99m)Tc-labeled ligands was more than 95%. Analysis of brain regional uptake showed higher concentration in the frontal lobe and specific uptake in the hippocampus. (99m)Tc-NCAM reached a higher target to nontarget ratio than (99m)Tc-NHAM. The results indicated that (99m)Tc-NCAM bound to a single site on the NMDA receptor with a K(d) of 701.21 nmol/l and a B(max) of 62.47 nmol/mg. Specific inhibitors of the NMDA receptor, ketamine and dizocilpine, but not the dopamine D(2) and 5HT(1A) receptor partial agonist aripiprazole, inhibited specific binding of (99m)Tc-NCAM to the NMDA receptor. Cell physiology experiments showed that NCAM can increase the viability of SH-SY5Y cells after glutamate-induced injury., Conclusions: The new radioligand (99m)Tc-NCAM has good affinity for and specific binding to the NMDA receptor, and easily crosses the blood-brain barrier; suggesting that it might be a potentially useful tracer for NMDA receptor expression., (Copyright © 2012 Elsevier Inc. All rights reserved.)