Search

Hot cracking is a frequent and severe defect that occurs during laser additive manufacturing of superalloys. In this work, a pulsed-wave (PW) laser modulation process was employed to control the solidification microstructure and reduce the hot cracking susceptibility of laser additive manufactured cobalt-based superalloy. The effects of continuous-wave (CW) and PW laser processing modes on the dendrite morphology, element segregation, eutectic phase, and hot cracking of fabricated Co-based superalloys were investigated. Optical microscopy, scanning electron microscopy, and energy-dispersive X-ray spectroscopy were used to characterize the microstructural characteristics of samples. A two-color pyrometer was used to measure the molten pool temperature variation under different laser processing modes. The results show that coarse columnar dendrites, chain-like eutectic carbides, and hot cracks were observed in the CW sample. In contrast, the fine equiaxed crystals, discrete eutectic carbides, and low-level residual stresses were obtained to avoid hot cracks, owing to the high cooling rate and the periodic melting and solidification of the molten pool under the PW laser processing mode. This work provides a new method for controlling solidification structure and hot cracking of laser additive manufactured Co-based superalloy. [ABSTRACT FROM AUTHOR]

A sustainable and efficient strategy for the synthesis of 3-pyridyl-3,3-disubstituted oxindole derivatives has been achieved via PyBroP (bromotripyrrolidinophosphonium hexafluorophosphate) promoted nucleophilic addition reaction of oxindoles with pyridine N-oxides. The approach worked well under relatively mild conditions. The protocol features a broad substrate scope and good functional group tolerance and gives products in moderate to excellent (52–95%) yields. [ABSTRACT FROM AUTHOR]

Semiconductor thin films for electronic devices are usually produced through processes such as chemical vapor deposition, which requires careful control of the gas flow, heat distribution, and concentration distribution over the substrate to ensure a uniform deposition rate and thickness. Herein, a systematic method is proposed for the theoretical adjustment of metalorganic chemical vapor deposition (MOCVD) process parameters. To this end, a GaN-MOCVD reactor with a vertical injection structure was simulated based on computational fluid dynamics to analyze the stable flow under a fixed flow rate. The orthogonal experimental design was used to analyze the influence of process conditions on film quality. A neural network and genetic algorithm were used to optimize the inlet flow under the stable flow state to render the coefficient of variation <3%. Under these conditions, the flow field in the reactor was stabilized to ensure a uniform thickness for the deposited film. This study provides not only an effective solution for high-quality epitaxial growth but also a theoretical basis for subsequent experiments and equipment improvement. [ABSTRACT FROM AUTHOR]

Salmonella is the primary cause of community-acquired foodborne infections, so its resistance to antimicrobials, such as aminoglycosides, is a public health issue. Of concern, aminoglycoside resistance in Salmonella is increasing rapidly. Here, we performed a retrospective study evaluating the prevalence of Salmonella harboring armA -mediated aminoglycoside resistance in community-acquired infections and in food or environmental sources. The prevalence rates of armA -harboring Salmonella strains were 1.1/1,000 (13/12,095) and 8.7/1,000 (32/3,687) in outpatient and food/environmental isolates, respectively. All the armA -harboring Salmonella strains were resistant to multiple drugs, including fluoroquinolone and/or extended-spectrum cephalosporins, and most (34/45) belonged to serovar Indiana. The armA gene of these strains were all carried on plasmids, which spanned five replicon types with IncHI2 being the dominant plasmid type. All the armA -carrying plasmids were transferable into Escherichia coli and Acinetobacter baumannii recipients. The conjugation experiment results revealed that the armA -harboring S. Indiana strains had a relatively higher ability to acquire armA -carrying plasmids. The low similarity of their pulsed field gel electrophoresis patterns indicates that the armA -harboring Salmonella strains were unlikely to have originated from a single epidemic clone, suggesting broad armA spread. Furthermore, the genetic backgrounds of armA -harboring Salmonella strains isolated from outpatients exhibited higher similarity to those isolated from poultry than to those isolated from swine, suggesting that poultry consumption maybe an infection source. These findings highlight an urgent need to monitor the prevalence and transmission of armA -harboring Salmonella , especially S. Indiana, to better understand the potential public health threat and prevent the further spread of these strains. [ABSTRACT FROM AUTHOR]

International travel may facilitate the spread of the novel coronavirus disease (COVID‐19). The study describes clusters of COVID‐19 cases within Chinese tour groups travelling in Europe January 16–28. We compared characteristics of cases and non‐cases to determine transmission dynamics. The index case travelled from Wuhan, China, to Europe on 16 January 2020, and to Shanghai, China, on 27 January 2020, within a tour group (group A). Tour groups with the same outbound flight (group B) or the same tourism venue (group D) and all Chinese passengers on the inbound flight (group C) were investigated. The outbreak involved 11 confirmed cases, 10 suspected cases and six tourists who remained healthy. Group A, involving seven confirmed cases and six suspected cases, consisted of familial transmission followed by propagative transmission. There was less pathogenicity with propagative transmission than with familial transmission. Disease was transmitted in shared outbound flights, shopping venues within Europe and inbound flight back to China. The novel coronavirus caused clustered cases of COVID‐19 in tour groups. When tourism and travel opens up, governments will need to improve screening at airports and consider increased surveillance of tour groups—particularly those with older tour members. [ABSTRACT FROM AUTHOR]

We used contact tracing to document how COVID‐19 was transmitted across 5 generations involving 10 cases, starting with an individual who became ill on January 27. We calculated the incubation period of the cases as the interval between infection and development of symptoms. The median incubation period was 6.0 days (interquartile range, 3.5‐9.5 days). The last two generations were infected in public places, 3 and 4 days prior to the onset of illness in their infectors. Both had certain underlying conditions and comorbidity. Further identification of how individuals transmit prior to being symptomatic will have important consequences. [ABSTRACT FROM AUTHOR]

Coronavirus disease 2019 (COVID‐19) is an emerging infectious disease first identified in Wuhan City, Hubei Province, China. As of 19 February 2020, there had been 333 confirmed cases reported in Shanghai, China. This study elaborates on the epidemiological and clinical characteristics of COVID‐19 based on a descriptive study of the 333 patients infected with COVID‐19 in Shanghai for the purpose of probing into this new disease and providing reference. Among the 333 confirmed cases in Shanghai, 172 (51.7%) were males and 161 (48.3%) were females, with a median age of 50 years. 299 (89.8%) cases presented mild symptoms. 139 (41.7%) and 111 (33.3%) cases were infected in Wuhan and Shanghai, respectively. 148 (44.4%) cases once had contact with confirmed cases before onset, while 103 (30.9%) cases had never contacted confirmed cases but they had a sojourn history in Wuhan. The onset date of the first case in Shanghai was 28 December, with the peak appearing on 27 January. The median incubation period of COVID‐19 was estimated to be 7.2 days. 207 (62.2%) cases had fever symptoms at the onset, whereas 273 (82.0%) cases experienced fever before hospitalization. 56 (18.6%) adults experienced a decrease in white blood cell and 84 (42.9%) had increased C‐reactive protein after onset. Elderly, male and heart disease history were risk factors for severe or critical pneumonia. These findings suggest that most cases experienced fever symptoms and had mild pneumonia. Strengthening the health management of elderly men, especially those with underlying diseases, may help reduce the incidence of severe and critical pneumonia. Time intervals from onset to visit, hospitalization and diagnosis confirmed were all shortened after Shanghai's first‐level public health emergency response. Shanghai's experience proves that COVID‐19 can be controlled well in megacities. [ABSTRACT FROM AUTHOR]

Polymerization dynamics of single actin filaments coupled with adenosine triphosphate (ATP) hydrolysis is investigated via both theoretical analysis and Brownian dynamics simulations. Brownian dynamics simulations have been applied recently to study the growth behaviors of long filaments as a function of the free actin monomer concentrations, CT, which is found to be in agreement with the associated experiments. In the present study, both ATP cap length and length diffusivity are studied as a function of the free ATP-actin monomer concentrations, CT. The exact analytical expressions are found to be in perfect consistency with Brownian dynamics simulations. Likewise, we find that the length diffusion coefficient is peaked near the critical concentration, CT, cr. It is, therefore, expected that the dependence of length diffusivity on ATP-actin monomer concentrations is utilized to analyze the surprising experiments on the length fluctuations of individual actin filaments. [ABSTRACT FROM AUTHOR]

Control of solidification structure and crystallographic texture during metal additive manufacturing is a challenging work which attracts the increasing interest of researchers. In the present work, two kinds of scanning strategies (i.e., single-directional scanning (SDS) and cross-directional scanning (CDS) were used to control the solidification structure and crystallographic texture during quasi-continuous-wave laser additive manufacturing (QCW-LAM) of Inconel 718. The results show that the solidification structure and texture are strongly dependent on scanning strategies. The SDS develops a typical fiber texture with unidirectional columnar grains, whereas the CDS develops a more random texture with a mixture of unidirectional and multidirectional grains. In addition, the SDS promotes the continuously epitaxial growth of columnar dendrites and results in the linearly distributed Laves phase particles, while the CDS leads to the alternately distributed Laves phase particles with chain-like morphology and discrete morphology. The changed stacking features of molten-pool boundary and the switched heat flow direction caused by different scanning strategies plays a crucial role on the epitaxial growth of dendrites and the final solidification structure of the fabricated parts. [ABSTRACT FROM AUTHOR]

It is well known that surface roughness always enhances wetting for hydrophilic, but drying for hydrophobic surfaces. In this letter, the authors found that La0.7Sr0.3MnO3 coatings display distinct wettability from superhydrophilicity to superhydrophobictiy, which is tuned by their hierarchical microstructures obtained by annealing the coatings composed of nanopowder at different temperatures. This offers a strong support to Herminghaus’s model [Europhys. Lett. 52, 165 (2000)] which predicts that the material hierarchical structure determines its wettability and widens the range of raw materials for superhydrophobic surfaces. [ABSTRACT FROM AUTHOR]

What Is Already Known About This Topic?: Foodborne diseases are a growing public health concern with a notable disease burden in China., What Is Added by This Report?: Two children with diarrhea visited a healthcare facility within 24 hours on August 1 and 2, 2023. Salmonella Grumpensis was detected in their stool samples by the public health laboratory. Whole genome sequencing (WGS) analysis revealed characteristics typical of outbreak strains. Although the origin of the outbreak was unknown, the possibility of a hidden shared infection was deemed feasible., What Are the Implications for Public Health Practice?: It underscores the importance of thorough genomic surveillance to promptly detect emerging pathogens. Public health laboratories play a crucial role by utilizing advanced genomic technologies for accurate pathogen identification and timely warning systems., Competing Interests: No conflicts of interest., (Copyright and License information: Editorial Office of CCDCW, Chinese Center for Disease Control and Prevention 2024.)

We report three clusters related with potential pre-symptomatic transmission of coronavirus disease (COVID-19) between January and February 2020 in Shanghai, China. Investigators interviewed suspected COVID-19 cases to collect epidemiological information, including demographic characteristics, illness onset, hospital visits, close contacts, activities' trajectories between 14 days before illness onset and isolation, and exposure histories. Respiratory specimens of suspected cases were collected and tested for SARS-CoV-2 by real-time reverse-transcriptase polymerase chain reaction (rRT-PCR) assay. The interval between the onset of illness in the primary case and the last contact of the secondary case with the primary case in our report was 1 to 7 days. In Cluster 1 (five cases), illness onset in the five secondary cases was 2 to 5 days after the last contact with the primary case. In Cluster 2 (five cases) and Cluster 3 (four cases), the illness onset in secondary cases occurred prior to or on the same day as the onset in the primary cases. The study provides empirical evidence for transmission of COVID-19 during the incubation period and indicates that pre-symptomatic person-to-person transmission can occur following sufficient exposure to confirmed COVID-19 cases. The potential pre-symptomatic person-to-person transmission puts forward higher requirements for prevention and control measures.

Background: Norovirus is an important cause of gastroenteritis both in children and adults. In China, few studies have been conducted on adult populations. This study aimed to determine the contribution of norovirus to gastroenteritis, characterize the features of norovirus infections, compare them with other pathogens, and test the effectiveness of the surveillance system., Methods: A citywide surveillance network on diarrhea patients was established. Samples were collected with intervals from both children and adults among diarrhea outpatients in hospitals and tested for viruses using rRT-PCR and for bacteria in CDCs. Patient information was acquired through interviews and recorded into a dedicated online system. The Pearson χ2 test, multivariate logistic regression models and discriminant models were fitted into its comparisons with the non-norovirus group and other pathogens., Results: Norovirus was detected in 22.91% of sampled diarrhea patients. The seasonal distribution of norovirus infections was different from non-norovirus patients (p<0.001), with a half-year peak. Higher proportions of males (p=0.001, OR=1.303, 95% CI=1.110-1.529), local citizens (p<0.001) and officials/clerks (p=0.001, OR=1.348, 95% CI=1.124-1.618) were affected with norovirus when compared with non-norovirus patients. Diarrhea patients affected with norovirus featured nausea (p<0.001, OR=1.418, 95% CI=1.176-1.709) and vomiting (p<0.001, OR=1.969, 95% CI=1.618-2.398), while fewer manifested fever (p=0.046, OR=0.758, 95% CI=0.577-0.996) and abdominal pain (p=0.018, OR=0.815, 95% CI=0.689-0.965). Children were more vulnerable to rotavirus (p=0.008, OR=1.637, 95% CI=1.136-2.358) and bacteria (p=0.027, OR=1.511, 95% CI=1.053-2.169) than norovirus. There was a seasonal difference between the GI and GII genotypes (p<0.001). Officials or clerks were more easily affected with GI than GII (p=0.006, OR=1.888, 95% CI=1.205-2.958)., Conclusions: This study was based on a citywide hospital-sentinel surveillance system with multiple enteric pathogens included. Norovirus was recognized as the most prevalent enteric pathogen in Shanghai. The seasonal peak was from October to April. Males had a higher prevalence than females. Local citizens and officials/clerks were more vulnerable to norovirus than other pathogens. Compared with rotavirus and bacteria, children were less frequently affected by norovirus. Nausea and vomiting were typical of norovirus, whereas fever and abdominal pain were uncommon symptoms of this pathogen. GI and GII infections were centered in different seasons. Officials and clerks were more easily affected by GI than GII.

Materials having tunable optical properties are of great interest for photonic applications. Promising candidates in that context are transparent nanoporous media whose optical properties change after infiltration of a liquid into the pores. Herein we present an all-optical method to tune the light scattering properties of a nanoporous glass based on the light-induced phase change of the fluid filling the pores. The thermodynamic state of the gas inside the nanopores determines the light scattering, thereby the light transmission. The extent of capillary condensation inside the nanoscale pores is controlled by heat generated from light absorption inside the medium. The material can be configured in such a way that a laser beam of sufficient intensity either opens up or shuts down its own light path on a time scale of a few seconds. The scattering events inside the medium change the beam profile from Gaussian to super-Gaussian with a more homogeneous intensity distribution close to the beam axis. Our results demonstrate a new way of tuning the light transmission properties of nanoporous materials that could find various applications in integrated optical systems and optofluidic devices.