Search

Within the Northern Calcareous Alps (NCA) fold-and-thrust belt of the Eastern Alps, multiple pre-shortening deformation phases have contributed to the structural grain that controlled localization of deformation at later stages. In particular, Jurassic rifting and opening of the Alpine Tethys led to the formation of extensional basins at the northern margin of the Apulian plate. Subsequent Cretaceous shortening within the Northern Calcareous Alps produced the enigmatic Achental structure, which forms a sigmoidal transition zone between two E–W-striking major synclines. One of the major complexities of the Achental structure is that all structural elements are oblique to the Cretaceous direction of shortening. Its sigmoidal form was, therefore, proposed to be a result of forced folding at the boundaries of the Jurassic Achental basin. This study analyses the structural evolution of the Achental structure through integrating field observations with crustal-scale physical analogue modelling to elucidate the influence of pre-existing crustal heterogeneities on oblique basin inversion. From brittle–ductile models that include a weak basal décollement, we infer that oblique shortening of pre-existing extensional faults can lead to the localization of deformation at the pre-existing structure and predicts thrust and fold structures that are consistent with field observations. Consequently, the Achental low-angle thrust and sigmoidal fold train was able to localize at the former Jurassic basin margin, with a vergence opposite to the controlling normal fault, creating the characteristic sigmoidal morphology during a single phase of NW-directed shortening. [ABSTRACT FROM AUTHOR]

The Barents Shear Margin separates the Svalbard and Barents Sea from the North Atlantic. During the break-up of the North Atlantic the plate tectonic configuration was characterized by sequential dextral shear, extension, and eventually contraction and inversion. This generated a complex zone of deformation that contains several structural families of overlapping and reactivated structures. A series of crustal-scale analogue experiments, utilizing a scaled and stratified sand–silicon polymer sequence, was used in the study of the structural evolution of the shear margin. The most significant observations for interpreting the structural configuration of the Barents Shear Margin are the following. Prominent early-stage positive structural elements (e.g. folds, push-ups) interacted with younger (e.g. inversion) structures and contributed to a hybrid final structural pattern. Several structural features that were initiated during the early (dextral shear) stage became overprinted and obliterated in the subsequent stages. All master faults, pull-apart basins, and extensional shear duplexes initiated during the shear stage quickly became linked in the extension stage, generating a connected basin system along the entire shear margin at the stage of maximum extension. The fold pattern was generated during the terminal stage (contraction–inversion became dominant in the basin areas) and was characterized by fold axes striking parallel to the basin margins. These folds, however, strongly affected the shallow intra-basin layers. The experiments reproduced the geometry and positions of the major basins and relations between structural elements (fault-and-fold systems) as observed along and adjacent to the Barents Shear Margin. This supports the present structural model for the shear margin. [ABSTRACT FROM AUTHOR]

Within the Northern Calcareous Alps fold-and-thrust belt of the Eastern Alps, multiple deformation phases have contributed to the structural grain that localised deformation at later stages. In particular, Jurassic rifting and opening of the Alpine Tethys led to the formation of extensional basins at the northern margin of the Apulian plate. Subsequent Cretaceous shortening within the Northern Calcareous Alps produced the enigmatic Achental structure, which forms a sigmoidal transition zone between two E-W striking major synclines. One of the major complexities of the Achental structure is that all structural elements are oblique to the Cretaceous direction of shortening. It was therefore proposed to be a result of forced folding at the boundaries of the Achental basin. This study analyses the structural evolution of the Achental structure through integrating field observations with crustal-scale physical analogue models, to elucidate the influence of pre-existing crustal heterogeneities on oblique basin inversion and the prerequisites for the formation of a sigmoidal hanging wall that outlines former basin margins. From brittle-ductile models, we infer that shortening oblique to pre-existing extensional faults can lead to the localisation of thrust faults at the existing structure within a single deformation phase. Prerequisites are 1) a weak basal décollement that is offset by an existing normal fault, 2) the presence of topography in the hinterland, 3) a thin-skinned deformation style. Consequently, the Achental low-angle thrust and corresponding folds was able to localise exactly at the basin margin, with a vergence opposite to the Jurassic normal fault, creating the characteristic sigmoidal morphology during a single phase of NWdirected shortening. [ABSTRACT FROM AUTHOR]

Within the Northern Calcareous Alps fold-and-thrust belt of the Eastern Alps, multiple deformation phases have contributed to the structural grain that localised deformation at later stages. In particular, Jurassic rifting and opening of the Alpine Tethys led to the formation of extensional basins at the northern margin of the Apulian plate. Subsequent Cretaceous shortening within the Northern Calcareous Alps produced the enigmatic Achental structure, which forms a sigmoidal transition zone between two E-W striking major synclines. One of the major complexities of the Achental structure is that all structural elements are oblique to the Cretaceous direction of shortening. It was therefore proposed to be a result of forced folding at the boundaries of the Achental basin. This study analyses the structural evolution of the Achental structure through integrating field observations with crustal-scale physical analogue models, to elucidate the influence of pre-existing crustal heterogeneities on oblique basin inversion and the prerequisites for the formation of a sigmoidal hanging wall that outlines former basin margins. From brittle-ductile models, we infer that shortening oblique to pre-existing extensional faults can lead to the localisation of thrust faults at the existing structure within a single deformation phase. Prerequisites are 1) a weak basal décollement that is offset by an existing normal fault, 2) the presence of topography in the hinterland, 3) a thin-skinned deformation style. Consequently, the Achental low-angle thrust and corresponding folds was able to localise exactly at the basin margin, with a vergence opposite to the Jurassic normal fault, creating the characteristic sigmoidal morphology during a single phase of NW-directed shortening. [ABSTRACT FROM AUTHOR]

Polyphase deformation of continental crust is analysed through physical analogue models for settings where platform-basin geometries at passive continental margins are subject to subsequent shortening and orogenesis. In a first stage, segmentation of the brittle and brittle-ductile models into basins and platforms is achieved by extension. Basins are partly filled with brittle material to allow for a strength differences between basin and platform realms, simulating relatively weaker, incompetent deposits of grabens surrounded by competent pre-rift basement or carbonate platform rock, respectively. In a second stage of deformation, contraction parallel to oblique (10 to 20 degrees) with respect to the basin axes has been applied leading to the inversion of earlier formed basins. The experiments show that the simple presence of an inherited platform-basin configuration controls the overall style of compressional deformation, no matter of including frictional or viscous basal décollements, of varying the rheology of the basin fill, or of changing platform-basin thickness ratios. Orientations of thrust faults change laterally across inherited platform-basin transitions throughout all experiments; higher obliquity of basin inversion leading to stronger curvature of thrusts with respect to the pre-existing rift axes. Variations in the strike of thrust fronts are accompanied by changes of the shortening direction along one single fault and time step. Furthermore, our models support localisation of deformation in areas of lateral strength contrasts, as platform-basin transitions represent. Reactivation of normal faults occurs in oblique basin inversion settings only, favourably at platform-basin transitions where the normal faults face the shortening direction. The amount and style of fault reactivation depend on the material used. Both parallel and oblique inversion experiments can be applied to polyphase deformed continental crust, as, e.g., the Dolomites Indenter of the eastern Southern Alps. Our models involving two phases of deformation, suggest that the whole tectonic evolution of the Dolomites Indenter is controlled by inherited features. Fault slip data and shortening directions from fold axes from our field case study along the western segment of the Belluno thrust of the Valsugana fault system support variations of thrust fault orientation and a lateral change in shortening direction (from SSW to SSE along strike) along one single fault. Based on our modelling results, we infer that this variability of shortening directions depends on inherited structures and do not necessarily reflect different deformation phases. [ABSTRACT FROM AUTHOR]

The consequences of decoupling between weak orogenic wedges and strong adjacent foreland plates are investigated by means of lithospheric-scale analogue modeling. Decoupling is implemented in the three-layer models by lubrication of the inclined boundary between a strong foreland and a weak orogenic wedge. Plate boundaries are orthogonal to the convergence direction. Experimental results show that strong decoupling between the foreland and the orogenic wedge leads to underthrusting of the former underneath the orogenic wedge and deformation of the orogenic wedge by folding, shearing, and minor backthrusting. Shortening is mainly taken up along the main overthrust, the decoupled boundary, and within the orogenic wedge, leaving the indenter devoid of deformation. In contrast, strong coupling between the foreland and the orogenic wedge favors buckling, involving both the weak zone and the strong plates. The results of these end-member models have implications for collision zones, for example, the Eastern Alps in Europe, such that the switch from localized deformation within the orogenic wedge during the Oligocene-middle Miocene to orogen-scale uplift and deformation during the late Miocene-Pliocene involving the foreland and indenter plates, respectively, is interpreted as reflecting a change from a decoupled to a coupled system.

The high‐pressure metamorphic Nevado‐Filábride Complex (NFC) in the Betics mountain range of southeastern Spain exhibits continental and ocean‐derived tectonic units, which are key for understanding the geodynamic evolution of the Western Mediterranean. We address the current debate in the definition of tectonic units, the emplacement of (ultra)mafic rocks, and the timing of burial metamorphism by conducting a structural study combined with single grain fusion 40Ar/39Ar dating of white micas in structurally critical outcrops of the eastern Sierra de Los Filábres. One older 40Ar/39Ar age population (38–27 Ma) is found at distance from the main shear zones in the relics of an early foliation, while a younger 40Ar/39Ar population (22–12 Ma) is dominant in the vicinity of these shear zones, where the early foliation is obliterated. Both age groups are interpreted as the record of deformation or fluid‐induced recrystallization during distinct fabric‐forming events, while alternative scenarios are discussed. A key observation is the presence of an ophiolitic mélange, which—together with new and published geochronological data—allows for a new tectonic hypothesis. This considers Paleogene subduction beneath a Jurassic oceanic lithosphere, followed by the continued subduction of NFC and overlying ophiolites below the Alpujárride Complex. Exhumation during westward slab roll‐back led to the formation of an extensional detachment system that obliquely cut nappe contacts. Although the timing constraints for high pressure‐low temperature (HP‐LT) metamorphism in the NFC remain inconclusive, the new tectonic hypothesis provides a solution that can account for both Paleogene and Miocene ages of HP‐LT metamorphism. Key Points: White mica 40Ar/39Ar dating yields Paleogene ages in relic crenulations, while Miocene ages in the vicinity of shear zonesShear sense indicators imply top‐NNW nappe stacking and top‐W displacement along the Betic Movement ZoneA new hypothesis is formulated for a gradual, Paleogene‐early Miocene burial of the Nevado‐Filábride Complex [ABSTRACT FROM AUTHOR]

[1] We calculate the present-day lithospheric strength of the Eastern Alps along the new reflection seismic profile TRANSALP to examine vertical and lateral strength variations and their implications on neotectonic activity of the Eastern Alps. The large-scale geometry of the Eastern Alps and the spatial distribution of upper, and lower crustal layers, and the lithospheric mantle is constrained by the deep seismic line. Two rheological models, coupled to a kinematic thermal model that accounts for the thermal evolution of the Eastern Alps for the last 30 Myr, are investigated for the present-day lithospheric configuration in the Eastern Alps. Models with strong (Model A) and weak (Model B) crustal rheologies predict the European and the Adriatic plates to be stronger than the central zone of the orogen comprising the region between the Inntal Fault and the Periadriatic Fault. Model A is characterized by a brittle-ductile boundary between 14 and 9 km depth and strong coupling of the mechanically strong lower crust to the upper mantle, whereas Model B suggests the presence of a thick decoupling zone between the upper crust and the upper mantle and a shallower brittle-ductile boundary (7-10 km). Of these end-member scenarios, Model A is in better agreement with neotectonic data including seismicity down to the upper-lower crust boundary within the Adriatic plate, uplift of the central zone of the Eastern Alps and the Southern Alps, and eastward escape of fault-bound blocks. Such deformation pattern is best explained by lateral extrusion upon north-south compression supporting a strong-weak-strong configuration of tectonic units along the TRANSALP line. INDEX TERMS: 9335 Information Related to Geographic Region: Europe; 8102 Tectonophysics: Continental contractional orogenic belts; 8107 Tectonophysics: Continental neotectonics; 8159 Tectonophysics: Rheology--crust and lithosphere; 8164 Tectonophysics: Stresses--crust and lithosphere; KEYWORDS: Eastern Alps, lithospheric strength, neotectonics, rheology, TRANSALP.

Particle image velocimetry (PIV), a method based on image cross-correlation, is widely used for obtaining velocity fields from time-series of images of deforming objects. Rather than instantaneous velocities, we are interested in reconstructing cumulative deformation, and use PIV-derived incremental displacements for this purpose. Our focus is on analogue models of tectonic processes, which can accumulate large deformation. Importantly, PIV provides incremental displacements during analogue model evolution in a spatial reference (Eulerian) frame, without the need for explicit markers in a model. We integrate the displacements in a material reference (Lagrangian) frame, such that displacements can be integrated to track the spatial accumulative deformation field as a function of time. To describe cumulative, finite deformation, various strain tensors have been developed, and we discuss what strain measure best describes large shape changes, as standard infinitesimal strain tensors no longer apply for large deformation. PIV or comparable techniques have become a common method to determine strain in analogue models. However, the qualitative interpretation of observed strain has remained problematic for complex settings. Hence, PIV-derived displacements have not been fully exploited before, as methods to qualitatively characterize cumulative, large strain have been lacking. Notably, in tectonic settings, different types of deformation—extension, shortening, strike-slip—can be superimposed. We demonstrate that when shape changes are described in terms of Hencky strains, a logarithmic strain measure, finite deformation can be qualitatively described based on the relative magnitude of the two principal Hencky strains. Thereby, our method introduces a physically meaningful classification of large 2-D strains. We show that our strain type classification method allows for accurate mapping of tectonic structures in analogue models of lithospheric deformation, and complements visual inspection of fault geometries. Our method can easily discern complex strike-slip shear zones, thrust faults and extensional structures and its evolution in time. Our newly developed software to compute deformation is freely available and can be used to post-process incremental displacements from PIV or similar autocorrelation methods. [ABSTRACT FROM AUTHOR]

Pull-apart basins are structural features linked to the interactions between strike-slip and extensional tectonics. Their morphology and structural evolution are determined by factors such as extension rate, the basin length/width ratio, and changes in extension direction. In this work, we investigate the effect of a change in the plate motion direction on a pull-apart basin's structure, using analogue modelling experiments with a two-layer ductile-brittle configuration to simulate continental crust rheology. We initially impose orthogonal extension on an interconnected rift and strike-slip system to drive pull-apart development. Subsequently, we rotate the relative motion vector, imposing transtensional deformation and continuing with this new relative motion vector to the end of the experiment. To compare with natural examples, we analyse the model using seismic interpretation software, generating 3D fault structure and sedimentary thickness interpretations. Results show that the change in the direction of plate motion produces map-view sigmoidal oblique slip faults that become normal-slip when deformation adjusts to the new plate motion vector. Furthermore, sediment distribution is strongly influenced by the relative plate rotation, changing the locus of deposition inside the basin at each model stage. Finally, we compare our observations to seismic reflection images, sedimentary package thicknesses and fault interpretations from the Northern Gulf of California and find good agreement between model and nature. Similar fault arrays occur in the Bohai Basin in northern China, which suggests a rotational component in its evolution. More broadly, such similar structures could indicate a role for oblique extension and fault rotation in any pull-apart basin. [ABSTRACT FROM AUTHOR]

Although many different mechanisms for subduction initiation have been proposed, only few of them are viable in terms of consistency with observations and reproducibility in numerical experiments. In particular, it has recently been demonstrated that intra‐oceanic subduction triggered by an upwelling mantle plume could greatly contribute to the onset and operation of plate tectonics in the early and, to a lesser degree, modern Earth. On the contrary, the initiation of intra‐continental subduction still remains underappreciated. Here we provide an overview of 1) observational evidence for upwelling of hot mantle material flanked by downgoing proto‐slabs of sinking continental mantle lithosphere, and 2) previously published and new numerical models of plume‐induced subduction initiation. Numerical modeling shows that under the condition of a sufficiently thick (>100 km) continental plate, incipient downthrusting at the level of the lowermost lithospheric mantle can be triggered by plume anomalies of moderate temperatures and without significant strain‐ and/or melt‐related weakening of overlying rocks. This finding is in contrast with the requirements for plume‐induced subduction initiation within oceanic or thinner continental lithosphere. As a result, plume‐lithosphere interactions within continental interiors of Paleozoic‐Proterozoic‐(Archean) platforms are the least demanding (and thus potentially very common) mechanism for initiation of subduction‐like foundering in the Phanerozoic Earth. Our findings are supported by a growing body of new geophysical data collected in various intra‐continental areas. A better understanding of the role of intra‐continental mantle downthrusting and foundering in global plate tectonics and, particularly, in the initiation of "classic" ocean‐continent subduction will benefit from more detailed follow‐up investigations. Plain Language Summary: Subduction zones, areas where tectonic plates sink into the Earth mantle, are a vital component of the plate tectonic cycle and result in the opening and closure of oceans over geologic time. Despite major advances in the study of plate tectonics and geodynamics during the last decades, the causes for triggering subduction are still not well understood. In this paper, we review observations and insights from geodynamic models and show that upwelling inside the mantle (i.e., "mantle plumes or hot spots") offer a viable mechanism that takes lithospheric plates back into the deep mantle, thus initiating subduction. However, subduction initiated by mantle plumes within oceanic tectonic plates has rarely been observed in the Phanerozoic history of Earth (541‐0 Ma). In contrast, thick and old continental segments of tectonic plates appear to provide optimal conditions for their participation in plume‐induced sinking (subduction) into the interior of modern Earth in a mode detectable by geophysical imaging in different regions (Europe, Asia, North America). The role of such intra‐continental mantle sinking in global plate tectonics warrants thorough further examination in forthcoming studies. Key Points: We review insights from observational and numerical modeling studies on plume‐induced sinking of lithospheric mantlePlume‐induced mantle downthrusting within continental interiors and at their rims appears to be much more common than hitherto assumedPlausible consequences of intra‐continental mantle sinking for the operation of plate tectonics require further investigation [ABSTRACT FROM AUTHOR]

We have investigated subduction‐exhumation processes in the Pelagonian zone, exposed on the Northern Sporades islands (Aegean Sea) related to successive episodes of ocean continent and continent‐continent convergence through integrating multiscale structural analysis, metamorphic petrology, and white mica 40Ar/39Ar dating. Two major progressive phases of ductile deformation are documented, which are related to distinct episodes of tectonic burial and exhumation of the Pelagonian continental margin, which was facing the Neotethys/Vardar ocean. Review of existing data sets from neighboring regions shows that both deformation phases can be correlated along strike up to the Dinarides. The first phase of tectonic burial and exhumation (D1) is characterized by NW‐SE tectonic transport, greenschist facies metamorphism, and Early Cretaceous (~105‐135Ma) 40Ar/39 Ar white mica single fusion ages. D1 is correlated with the initial closure of the Vardar ocean by top‐to‐the‐W to NW ophiolite obduction and the underthrusting of the Pelagonian margin below the oceanic upper plate. Underthrusting was followed by exhumation and the deposition of Late Cretaceous‐Paleogene sediments. The second phase of burial and exhumation (D2) is characterized by NE‐SW tectonic transport, greenschist to blueschist facies metamorphism, and latest Cretaceous‐Early Eocene 40Ar/39 Ar white mica ages of S2 fabrics. Top‐to‐the‐SW shearing is correlated with the tectonic burial of the Pelagonian zone below the Eurasian continent (Rhodopia), while top‐to‐the‐NE shearing is attributed to subsequent extensional exhumation. D2 fabrics record low‐grade P‐T conditions suggesting that the decoupled cover formations exposed on Skopelos were incorporated in an accretionary wedge that formed above the subducting Pelagonian basement during Paleogene times. Key Points: Investigation of successive burial‐exhumation cycles by structural analysis and 40Ar/39Ar datingEarly Cretaceous deformation and metamorphism are linked to the underthrusting of the Pelagonian margin below the Vardar ophiolitesPaleogene deformation and metamorphism of Skopelos are governed by accretionary wedge evolution between Pelagonia and Rhodopia [ABSTRACT FROM AUTHOR]

ABSTRACT The sea floor of intraslope minibasins on passive continental margins plays a significant role in controlling turbidity current pathways and the resulting sediment distribution. To address this, laboratory analogue modelling of intraslope minibasin formation is combined with numerical flow simulations of multi-event turbidity currents. This approach permits an improved understanding of evolving flow-bathymetry-deposit interactions and the resulting internal stacking patterns of the infills of such minibasins. The bathymetry includes a shelf to slope channel followed by an upper minibasin, which are separated by a confining ridge from two lower minibasins that compares well with analogous bathymetries reported from natural settings. From a wider range of numerical flow experiments, a series of 100 consecutive flows is reported in detail. The turbidity currents are released into the channel and upon reaching the upper minibasin follow a series of stages from short initial ponding, 'filling and spilling' and an extended transition to long retrogradational ponding. Upon reaching the upper minibasin floor, the currents undergo a hydraulic jump and therefore much sediment is deposited in the central part of the minibasin and the counterslope. This modifies the bathymetry such that in the fill and spill stage, flow stripping and grain-size partitioning cause some finer sediment to be transported across the confining ridge into the lower minibasins. Throughout the basin infill process, the sequences retrograde upstream, accompanied by lateral switching into locally formed depressions in the upper minibasin. After the fill and spill stage, significant deposition occurs in the channel where retrograding cyclic steps with wavelengths of 1 to 2 km develop as a function of pulsating flow criticality. These results are at variance with conventional schemes that emphasize sequential downstream minibasin filling through ponding dominated by vertical aggradation. Comparison of these results with published field and experimental examples provides support for the main conclusions. [ABSTRACT FROM AUTHOR]

The thrust sheets of the Northern Calcareous Alps were emplaced during Late Cretaceous thrust-dominated transpression expressed by thrust sheets segmented by closely spaced tear faults. Thrust sheet-top sediments were deposited during thrusting and associated fold growth and were controlled by active folding and tearing. We observe two types of angular unconformities: (1) Angular unconformities above folds between tear faults conform with the model of progressive unconformities. Across these unconformities dip decreases upsection. (2) Here, we define progressive unconformities that are related to tear faults and are controlled by both folding and tearing. Across these unconformities both strike and dip change. In growth strata overlying folds dissected by high-angle faults, such unconformities are expected to be common. We used analogue modelling to define the geometry of the tear faults and related unconformities. Within the syn-tectonic sediments, a steep, upward flattening thrust within a broader, roughly tulip-shaped drag zone develops. The thrust roots in the tear fault in pre-tectonic deposits and is curved upward toward the downthrown block. Vertical offset on the thrust is related to differential vertical uplift caused by, for example, growth of folds with different wavelength and amplitude on either side of the tear fault. Formation of progressive unconformities is governed by the relationship between the rates of deposition and vertical growth of a structure. Fault-related progressive unconformities are additionally controlled by the growth of the vertical step across the tear fault. When the rates of vertical growth of two neighbouring folds separated by a tear fault are similar, the rate of growth across the tear fault is small; if the first differ, the latter is high. Episodic tear fault activity may create several angular unconformities attached to a tear fault or allow the generation of angular unconformities near tear faults in sedimentary systems that have a rate of deposition too high to generate classical progressive unconformities between the tear faults. [ABSTRACT FROM AUTHOR]

A series of analogue experiments utilizing sequences of sand with interlayered silicone polymer have been performed to investigate the effects of multistage extension on rock sequences of different strength, with particular reference to the Hoop Fault Complex of the Barents Sea. It was found that the width and style of the graben systems as seen in map view depend strongly on the extension velocity. Wide areas of graben formation are promoted by fast extension, whereas narrowly constrained deep-graben structures are typical of slow extension rates. Furthermore, the decoupling strata are likely to be characterized by flow rather than by distinct detachment faults. The scaled experiments produced units of contrasting fault frequencies and styles in individual sand layers positioned between layers of silicone polymer. It was also found that the fault segments developed from different levels were related to varying extents (hard-linked, soft-linked, firm-linked, unlinked). The fault configurations and the general fault pattern obtained in the experiments is similar to that observed in natural faults where salt or unconsolidated mudstone separate sequences of sand. [ABSTRACT FROM AUTHOR]

Southern Ethiopia is a key region to understand the evolution of the East African rift system, since it is the area of interaction between the main Ethiopian rift (MER) and the Kenyan rift. However, geological data constraining rift evolution in this remote area are still relatively sparse. In this study the timing, distribution, and style of rifting in southern Ethiopia are constrained by new structural, geochronological, and geomorphological data. The border faults in the area are roughly parallel to preexisting basement fabrics and are progressively more oblique with respect to the regional Nubia-Somalia motion proceeding southward. Kinematic indicators along these faults are mainly dip slip, pointing to a progressive rotation of the computed direction of extension toward the south. Radiocarbon data indicate post 30 ka faulting at both western and eastern margins of the MER with limited axial deformation. Similarly, geomorphological data suggest recent fault activity along the western margins of the basins composing the Gofa Province and in the Chew Bahir basin. This supports that interaction between the MER and the Kenyan rift in southern Ethiopia occurs in a 200 km wide zone of ongoing deformation. Fault-related exhumation at ~10-12 Ma in the Gofa Province, as constrained by new apatite fission track data, occurred later than the ~20 Ma basement exhumation of the Chew Bahir basin, thus pointing to a northward propagation of the Kenyan rift-related extension in the area. [ABSTRACT FROM AUTHOR]