Search

Abstract The editorial board of AGU Advances thanks the individuals who reviewed for the journal in 2022.

Under continuous human disturbance, regeneration is the basis for biodiversity persistence and ecosystem service provision. In tropical dry forests, edaphic ecosystem engineering by biological soil crusts (biocrusts) could impact regeneration by influencing erosion control and soil water and nutrient fluxes, which impact landscape hydrology, geomorphology, and ecosystem functioning. This study investigated the effect of cyanobacteria-dominated biocrusts on water infiltration and aggregate stability in a human-modified landscape of the Caatinga dry forest (NE Brazil), a system characterized by high levels of forest degradation and increasing aridity. By trapping dust and swelling of cyanobacterial filaments, biocrusts can seal soil surfaces and slow down infiltration, which potentially induces erosion. To quantify hydraulic properties and erosion control, we used minidisc-infiltrometry, raindrop-simulation, and wet sieving at two sites with contrasting disturbance levels: an active cashew plantation and an abandoned field experiencing forest regeneration, both characterized by sandy soils. Under disturbance, biocrusts had a stronger negative impact on infiltration (reduction by 42% vs. 37% during regeneration), although biocrusts under regenerating conditions had the lowest absolute sorptivity (0.042 ± 0.02 cm s−1/2) and unsaturated hydraulic conductivity (0.0015 ± 0.0008 cm s−1), with a doubled water repellency. Biocrusts provided high soil aggregate stability although stability increased considerably with progression of biocrust succession (raindrop simulation disturbed: 0.19 ± 0.22 J vs. regenerating: 0.54 ± 0.22 J). The formation of stable aggregates by early successional biocrusts on sandy soils suggests protection of dry forest soils even on the worst land use/soil degradation scenario with a high soil erosion risk. Our results confirm that biocrusts covering bare interspaces between vascular plants in human-modified landscapes play an important role in surface water availability and erosion control. Biocrusts have the potential to reduce land degradation, but their associated ecosystem services like erosion protection, can be impaired by disturbance. Considering an average biocrust coverage of 8.1% of the Caatinga landscapes, further research should aim to quantify the contribution of biocrusts to forest recovery to fully understand the role they play in the functioning of this poorly explored ecosystem.

Biocrusts are biological communities that occupy the soil surface, accumulate organic matter and mineral particles and hence strongly affect the properties of the soils they cover. Moreover, by affecting water repellency, biocrusts may cause a preferential infiltration of rainwater, with a high impact on the formation of local water pathways, especially for sand dunes. The aim of this study is to shed light on the connections between water repellency and pH, carbonate and organic matter content in two dune ecosystems with different biocrust types. For this, we used contact angle measurements, gas volumetric carbonate determination and organic matter characterization via FT-IR and TOF-SIMS. In both ecosystems, moss-dominated biocrusts showed higher water repellency and higher amounts of organic matter compared to algal or cyanobacterial biocrusts. Surprisingly, the biocrusts of the two dune systems did not show differences in organic matter composition or organic coatings of the mineral grains. Biocrusts on the more acidic dunes showed a significantly higher level of water repellency as compared to higher carbonate containing dunes. We conclude that the driving factor for the increase in water repellency between cyanobacterial and moss-dominated biocrusts within one study site is the content of organic matter. However, when comparing the different study sites, we found that higher amounts of carbonate reduced biocrust water repellency.

Abstract The editorial board of AGU Advances thanks the individuals who reviewed for the journal in 2021.

This article is an editorial that discusses the development and ecological functions of biological soil crusts (biocrusts). Biocrusts are composed of microorganisms and play important roles in soil stabilization, microbial diversity, and ecosystem development. The editorial emphasizes the need for further research on biocrust communities and their impact on landscape-scale outcomes. It also highlights the ecological functions of biocrusts, such as reducing erosion and influencing biogeochemical cycles. The article concludes by discussing the importance of understanding biocrusts for ecological restoration and land management strategies. Another document provides a list of references for articles related to biological soil crusts, covering topics such as land degradation neutrality, ecological restoration, and the impact of biocrusts on microbial communities. The articles also explore the composition and response of biocrusts to climate change and physical disturbance, as well as their effects on soil properties and metabolic response to hydration. [Extracted from the article]

Abstract As individuals serving on the AGU Advances editorial board, we condemn racism, affirm that Black Lives Matter, and recognize that inequality is built into the systems that have allowed us to prosper. We aim to persistently foster discussion about racism, inequity, and the need to make our community more diverse and inclusive. This will help AGU Advances do a better job in publishing important science that inclusively reflects the ideas and contributions of all in our community.

Key Point The editors thank the 2020 peer reviewers

Background: Percolating dissolved organic matter (DOM) from the topsoil is considered the main source of subsoil organic carbon (OC) in temperate soils, but knowledge about its influence on OC storage and structure‐forming processes is limited. Aims: We conducted a 30‐day incubation experiment with artificial soils to study the effects of percolating DOM and soil texture on OC turnover and initial structure formation. Methods: Artificial soils with contrasting texture, but identical mineral composition, were used to mimic subsoil conditions, where mineral surfaces free of OM come into contact with percolating DOM. After the incubation, we assessed the solution exchange, OM covers on minerals, microbial community and OC turnover, and aggregate formation and stability. Results: A higher sand content caused a lower porosity, accompanied by a lower moisture content. In contrast, the OC retention (21% of the OC input), microbial activity, and community size were unaffected by soil texture. The OM covered 10% of the mineral surfaces within an otherwise OC‐free mineral matrix. The formation of large, water‐stable aggregates occurred in all soils, but was pronounced in the clay‐rich soils (58% mass contribution), which also supported a higher mechanical stability of the aggregates. Conclusions: The initial retention and microbial mineralization of DOM are decoupled from pore sizes and soil solution exchange but are driven by the mineral composition and OC input. The biochemical processing of the percolating DOM can induce large aggregates. Here, the presence of fine mineral particles enhances the formation and mechanical stability of the aggregates, irrespective of their surface charge or sorptive properties. [ABSTRACT FROM AUTHOR]

Background: Soil stability is often evaluated using either mechanical or hydraulic stress. The few studies that use both approaches suggest that these two types of stability behave differently. Aims: Our aim was to explore the mechanisms of aggregate stability regarding mechanical and water stability at the macro‐ and microscale, among other things, the effect of differing pore structure and soil organic matter content. Methods: Samples were taken from two adjacent plots that were expected to differ in stability due to land use, that is, cropped versus bare fallow (BF). The stability of dry‐separated macroaggregates (8–16 mm) and microaggregates (53–250 µm) was determined via wet sieving and unconfined uniaxial compression tests. To explore the mechanisms of stability, 3D pore characteristics were analyzed with microtomography scans. Furthermore, the contents of carbon and exchangeable polyvalent cations as well as contact angles were determined. Results: Water stability of macroaggregates was much higher in the cropped plot (geometric mean diameter 0.65–2.37 mm [cropped] vs. 0.31–0.56 mm [BF]), while mechanical stability was very similar (median work 17.3 [cropped] and 17.5 N mm [BF]). The two size fractions behaved similarly regarding both types of stability, with more pronounced differences in macroaggregates. Several soil characteristics, like carbon, exchangeable calcium, and higher connectivity of pores to the aggregate exterior, contributed to water stability. Regarding mechanical stability, the destabilizing effect of lower carbon content and exchangeable calcium in the BF plot was counterbalanced by a lower porosity. Conclusions: Mechanical and water stability behaved differently in the two plots due to the different deformation mechanisms. [ABSTRACT FROM AUTHOR]

The functions of soils are intimately linked to their three‐dimensional pore space and the associated biogeochemical interfaces, mirrored in the complex structure that developed during pedogenesis. Under stress overload, soil disintegrates into smaller compound structures, conventionally named aggregates. Microaggregates (<250 µm) are recognized as the most stable soil structural units. They are built of mineral, organic, and biotic materials, provide habitats for a vast diversity of microorganisms, and are closely involved in the cycling of matter and energy. However, exploring the architecture of soil microaggregates and their linkage to soil functions remains a challenging but demanding scientific endeavor. With the advent of complementary spectromicroscopic and tomographic techniques, we can now assess and visualize the size, composition, and porosity of microaggregates and the spatial arrangement of their interior building units. Their combinations with advanced experimental pedology, multi‐isotope labeling experiments, and computational approaches pave the way to investigate microaggregate turnover and stability, explore their role in element cycling, and unravel the intricate linkage between structure and function. However, spectromicroscopic techniques operate at different scales and resolutions, and have specific requirements for sample preparation and microaggregate isolation; hence, special attention must be paid to both the separation of microaggregates in a reproducible manner and the synopsis of the geography of information that originates from the diverse complementary instrumental techniques. The latter calls for further development of strategies for synlocation and synscaling beyond the present state of correlative analysis. Here, we present examples of recent scientific progress and review both options and challenges of the joint application of cutting‐edge techniques to achieve a sophisticated picture of the properties and functions of soil microaggregates. [ABSTRACT FROM AUTHOR]

Biological soil crusts (biocrusts) are millimeter-sized microbial communities developing on the topsoils of arid lands that cover some 12% of Earth's continental area. Biocrusts consist of an assemblage of mineral soil particles consolidated into a crust by microbial organic polymeric substances that are mainly produced by filamentous bundle-forming cyanobacteria, among which Microcoleus vaginatus is perhaps the most widespread. This cyanobacterium is the primary producer for, and main architect of biocrusts in many arid soils, sustaining the development of a diverse microbial community. Biocrusts are only active when wet, and spend most of their time in a state of desiccated quiescence, from which they can quickly recover upon wetting. Despite their ecological importance for arid ecosystems, little is known about the mechanisms that allow biocrust organisms to endure long periods of dryness while remaining viable for rapid resuscitation upon wetting. We had previously observed the persistence of significant rates of light-dependent carbon fixation in apparently dry biocrusts dominated by M. vaginatus, indicating that it may be able to remain hydrated against a background soil of very low water potential. One potential explanation for this may be that the abundant exopolysaccharide sheaths of M. vaginatus can preferentially retain moisture thus slowing the water equilibration with the surrounding soil allowing for extended activity periods. In order to test this hypothesis we aimed to develop methodologies to visualize and quantify the water dynamics within an undisturbed biocrust undergoing desiccation. We used synchrotron based X-ray microtomography and were able to resolve the distribution of air, liquid water, mineral particles and cyanobacterial bundles at the microscale. We could demonstrate the formation of steep, decreasing gradients of water content from the cyanobacterial bundle surface outward, while the bundle volume remained stable, as the local bulk water content decreased linearly, hence demonstrating a preferential retention of water in the microbes. Our data also suggest a transfer of hydration water from the EPS sheath material into the cyanobacterial filament as desiccation progresses. This work demonstrates the value of X-ray tomography as a tool to study microbe-scale water redistribution in biocrusts.

Rejuvenated volcanism refers to the reemergence of volcanism after a hiatus of 0.5–2 Ma following the voluminous shield building stage of Hawaiian volcanoes. The composition of the rejuvenated source and its distribution relative to the center of the plume provide important constraints on the origin of rejuvenated volcanism. Near‐contemporaneous lavas from the Kaula‐Niihau‐Kauai ridge and the North Arch volcanic field that are aligned approximately orthogonally to the plume track can constrain the lateral geochemical heterogeneity and distribution of the rejuvenated source across the volcanic chain. Nephelinites, phonolites and pyroxenite xenoliths from Kaula Island have radiogenic Hf, Nd and unradiogenic Sr isotope compositions consistent with a time‐integrated depleted mantle source. The pyroxenites and nephelinites extend to the lowest 208Pb/204Pb reported in Hawaiian rocks. These data, along with new Pb isotope data from pyroxenites from the Salt Lake Crater (Oahu) redefine the composition of the depleted end‐member of the Hawaiian rejuvenated source at 208Pb/204Pb=37.35±0.05, 206Pb/204Pb = 17.75±0.03, εNd = 9–10, εHf ∼16–17 and 87Sr/88Sr

Over the centuries, Grotius's writings on onderzetting (rights of hypothec) have been widely cited, particularly in the Netherlands and South Africa. This article investigates the originality and lasting impact of Grotius's contributions to this field. The article follows the layout of the chapter on hypothecs of Grotius's Inleiding tot de Hollandsche Rechts-geleertheyd. It examines Grotius's translation of hypotheca as onderzetting , the structure of his Inleiding , the distinctions between various kinds of hypothec, and contemporary requirements for the creation of hypothecs. It then explores the right to follow encumbered assets into the hands of third parties and analyses the enforcement of hypothecs, priority issues in cases of competing hypothecs, and reflects on Grotius's influence on Dutch security rights. In summary, although Grotius's insights were largely derivative, often echoing interpretations of earlier scholars, they illustrate Grotius's deep understanding of the influence of Germanic and Roman law on Roman-Dutch security rights. Grotius had a lasting impact on legal scholarship and practice because he was the first to provide a scholarly systematization of Roman-Dutch law within the framework of Justinian's Institutes and firmly placed the rights of hypothec in the book on property rights of his Inleiding. [ABSTRACT FROM AUTHOR]

Under continuous human disturbance, regeneration is the basis for biodiversity persistence and ecosystem service provision. In tropical dry forests, edaphic ecosystem engineering by biological soil crusts (biocrusts) could impact regeneration by influencing erosion control and soil water and nutrient fluxes, which impact landscape hydrology, geomorphology, and ecosystem functioning. This study investigated the effect of cyanobacteria-dominated biocrusts on water infiltration and aggregate stability in a human-modified landscape of the Caatinga dry forest (NE Brazil), a system characterized by high levels of forest degradation and increasing aridity. By trapping dust and swelling of cyanobacterial filaments, biocrusts can seal soil surfaces and slow down infiltration, which potentially induces erosion. To quantify hydraulic properties and erosion control, we used minidisc-infiltrometry, raindrop-simulation, and wet sieving at two sites with contrasting disturbance levels: an active cashew plantation and an abandoned field experiencing forest regeneration, both characterized by sandy soils. Under disturbance, biocrusts had a stronger negative impact on infiltration (reduction by 42% vs. 37% during regeneration), although biocrusts under regenerating conditions had the lowest absolute sorptivity (0.042 ± 0.02 cm s-1/2) and unsaturated hydraulic conductivity (0.0015 ± 0.0008 cm s-1), with a doubled water repellency. Biocrusts provided high soil aggregate stability although stability increased considerably with progression of biocrust succession (raindrop simulation disturbed: 0.19 ± 0.22 J vs. regenerating: 0.54 ± 0.22 J). The formation of stable aggregates by early successional biocrusts on sandy soils suggests protection of dry forest soils even on the worst land use/soil degradation scenario with a high soil erosion risk. Our results confirm that biocrusts covering bare interspaces between vascular plants in human-modified landscapes play an important role in surface water availability and erosion control. Biocrusts have the potential to reduce land degradation, but their associated ecosystem services like erosion protection, can be impaired by disturbance. Considering an average biocrust coverage of 8.1% of the Caatinga landscapes, further research should aim to quantify the contribution of biocrusts to forest recovery to fully understand the role they play in the functioning of this poorly explored ecosystem. [ABSTRACT FROM AUTHOR]

Contamination of soils in agroecosystems with microplastics (MPs) is of increasing concern. The contamination of the environment/farmland soils with MPs (1 µm to 5 mm sized particles) and nanoplastics (NPs; <1 µm sized particles) is causing numerous effects on ecological soil functions and human health. MPs enter the soil via several sources, either from intentional plastic use (e.g., plastic mulch, plastic greenhouses, plastic‐coated products) or indirectly from the input of sewage sludge, compost, or irrigation water that is contaminated with plastic. Once in the soil, plastic debris can have various impacts such as changes in soil functions and physicochemical properties and it affects soil organisms due to its toxic behavior. This review paper describes the different effects of plastic waste to understand the consequences for agricultural productivity. Furthermore, we identify knowledge gaps and highlight the required approaches, indicating future research directions on sources, transport, and fate of MPs in soils to improve our understanding of various unspecified abiotic and biotic impacts of MP pollution in agroecosystems. [ABSTRACT FROM AUTHOR]

Author(s): Vincent J. M. Salters (corresponding author) [1]; Henry J. B. Dick [2] Inferring the melting process at mid-ocean ridges, and the physical conditions under which melting takes place, usually [...]