Search

Iron-based electrocoagulation can be highly effective for Cr(VI) removal from water supplies. However, the presence of humic acid (HA) inhibited the rate of Cr(VI) removal in electrocoagulation, with the greatest decreases in Cr(VI) removal rate at higher pH. This inhibition was probably due to the formation of Fe(II) complexes with HA that are more rapidly oxidized than uncomplexed Fe(II) by dissolved oxygen, making less Fe(II) available for reduction of Cr(VI). Close association of Fe(III), Cr(III), and HA in the solid products formed during electrocoagulation influenced the fate of both Cr(III) and HA. At pH 8, the solid products were colloids (1-200 nm) with Cr(III) and HA concentrations in the filtered fraction being quite high, while at pH 6 these concentrations were low due to aggregation of small particles. X-ray diffraction and X-ray absorption fine structure spectroscopy indicated that the iron oxides produced were a mixture of lepidocrocite and ferrihydrite, with the proportion of ferrihydrite increasing in the presence of HA. Cr(VI) was completely reduced to Cr(III) in electrocoagulation, and the coordination environment of the Cr(III) in the solids was similar regardless of the humic acid loading, pH, and dissolved oxygen level.

Herein, we describe engineered superparamagnetic iron oxide nanoparticles (IONPs) as platform materials for enhanced uranyl (UO 2 2+ ) sorption and separation processes under environmentally relevant conditions. Specifically, monodispersed 8-25 nm iron oxide (magnetite, Fe 3 O 4 ) nanoparticles with tailored organic acid bilayered coatings have been systematically evaluated and optimized to bind, and thus remove, uranium from water. The combined nonhydrolytic synthesis and bilayer phase transfer material preparation methods yield highly uniform and surface tailorable IONPs, which allow for direct evaluation of the size-dependent and coating-dependent sorption capacities of IONPs. Optimized materials demonstrate ultrahigh sorption capacities (>50% by wt/wt) at pH 5.6 for 8 nm oleic acid (OA) bilayer and sodium monododecyl phosphate (SDP) surface-stabilized IONPs. Synchrotron-based X-ray absorption spectroscopy shows that iron oxide core particle size and stabilizing surface functional group(s) substantially affect U(VI)-removal mechanisms, specifically the ratio of uptake via adsorption versus reduction to U(IV). Taken together, tunable size and surface functionality, high colloidal stability, and favorable affinity toward uranium provide distinct synergistic advantage(s) for the application of bilayered IONPs as part of the next-generation material-based uranium recovery, remediation, and sensing technologies.

Phosphate can be added to subsurface environments to immobilize U(VI) contamination. The efficacy of immobilization depends on the site-specific groundwater chemistry and aquifer sediment properties. Batch and column experiments were performed with sediments from the Hanford 300 Area in Washington State and artificial groundwater prepared to emulate the conditions at the site. Batch experiments revealed enhanced U(VI) sorption with increasing phosphate addition. X-ray absorption spectroscopy measurements of samples from the batch experiments found that U(VI) was predominantly adsorbed at conditions relevant to the column experiments and most field sites (low U(VI) loadings, <25 μM), and U(VI) phosphate precipitation occurred only at high initial U(VI) (>25 μM) and phosphate loadings. While batch experiments showed the transition of U(VI) uptake from adsorption to precipitation, the column study was more directly relevant to the subsurface environment because of the high solid:water ratio in the column and the advective flow of water. In column experiments, nearly six times more U(VI) was retained in sediments when phosphate-containing groundwater was introduced to U(VI)-loaded sediments than when the groundwater did not contain phosphate. This enhanced retention persisted for at least one month after cessation of phosphate addition to the influent fluid. Sequential extractions and laser-induced fluorescence spectroscopy of sediments from the columns suggested that the retained U(VI) was primarily in adsorbed forms. These results indicate that in situ remediation of groundwater by phosphate addition provides lasting benefit beyond the treatment period via enhanced U(VI) adsorption to sediments.

The potential for new U.S. regulations for Cr(VI) in drinking water have spurred strong interests in improving technologies for Cr(VI) removal. This study examined iron electrocoagulation for Cr(VI) removal at conditions directly relevant to drinking water treatment. Cr(VI) is chemically reduced to less soluble Cr(III) species by the Fe(II) produced from an iron anode, and XANES spectra indicate that the Cr is entirely Cr(III) in solid-phases produced in electrocoagulation. The dynamics of Cr(VI) removal in electrocoagulation at pH 6 and pH 8 at both oxic and anoxic conditions can be described by a new model that incorporates Fe(II) release from the anode and heterogeneous and homogeneous reduction of Cr(VI) by Fe(II). Heterogeneous Cr(VI) reduction by adsorbed Fe(II) was critical to interpreting Cr(VI) removal at pH 6, and the Fe- and Cr-containing EC product was found to catalyze the redox reaction. Dissolved oxygen (DO) did not observably inhibit Cr(VI) removal because Fe(II) reacts with DO more slowly than it does with Cr(VI), and Cr(VI) removal was faster at higher pH. Even in the presence of common groundwater solutes, iron electrocoagulation lowered Cr(VI) concentrations to levels well below California's 10 μg/L.

Uranium (U) and arsenic (As) often occur together naturally and, as a result, can be co-contaminants at sites of uranium mining and processing, yet few studies have examined the simultaneous redox dynamics of U and As. This study examines the influence of arsenate (As(V)) on the reduction of uranyl (U(VI)) by the redox-active mineral mackinawite (FeS). As(V) was added to systems containing 47 or 470 μM U(VI) at concentrations ranging from 0 to 640 μM. In the absence of As(V), U was completely removed from solution and fully reduced to nano-uraninite (nano-UO2). While the addition of As(V) did not reduce U uptake, at As(V) concentrations above 320 μM, the reduction of U(VI) was limited due to the formation of a trögerite-like uranyl arsenate precipitate. The presence of U also significantly inhibited As(V) reduction. While less U(VI) reduction to nano-UO2 may take place in systems with high As(V) concentrations, formation of trögerite-like mineral phases may be an acceptable reclamation end point due to their high stability under oxic conditions.

Uniformly arrayed zirconium-phosphate nanoporous material was synthesized, characterized, and used as an adsorbent for removal of U(VI) in a NaNO3 solution with varying background conditions including pH, ionic strength, U(VI) concentrations, and carbonate concentrations. Batch U(VI) adsorption results showed that U(VI) adsorption reached steady-state condition within 48 h, and all the dissolved U(VI) (10(-6)M) was removed by this material at neutral pH and closed conditions to atmospheric CO2(g). The U(VI) adsorption followed a traditional Langmuir adsorption isotherm, and the distribution coefficient (K(d)) calculated from the linear region of the Langmuir isotherm was 105,000 mL g(-1). Because this phosphate-bearing nanoporous material exhibits high thermal stability and has a very high Kd value, it can be applied as an efficient adsorbent for removing U(VI) from various contaminated waste streams, such as those present at the US Department of Energy defense sites and the proposed geologic radioactive waste disposal facility at Yucca Mountain in Nevada.