Search

In this study, epoxidized natural rubber (ENR) was mixed using a two-roller mixer. Water hyacinth fiber (WHF) acted as a reinforcing agent in the preparation of the rubber composite at 10 phr (ENRC/WHF). Chlorhexidine gluconate (CHG) was added at different concentrations (1, 5, 10, and 20 phr) as an antimicrobial and coupling agent. The tensile strength increased with a CHG content of 1 phr (4.59 MPa). The ENRC/WHF/CHG20 blend offered high hardness (38) and good morphology owing to the reduction in cavities and fiber pull-out from the rubber matrix. The swelling of the sample blends in oil and toluene decreased as the CHG content increased. Reactions of –NH2/epoxy groups and –NH2/–OH groups occurred during the preparation of the ENRC/WHF/CHG blend. The FTIR spectroscopy peak at 1730 cm−1 confirmed the reaction between the −NH2 groups of CHG and epoxy groups of ENR. The ENRC/WHF/CHG blend at 10 phr and 20 phr exhibited zones of inhibition against three bacterial species (Staphylococcus aureus, Escherichia coli, and Bacillus cereus). CHG simultaneously acted as a crosslinking agent between ENR and WHF and as an antimicrobial additive for the blends. CHG also improved the tensile strength, hardness, swelling, and antimicrobial properties of ENR composites.

Abstract An epoxidized natural rubber (ENR) blend with chlorhexidine gluconate (CHG) was prepared using a two-roll mill at 130 °C. CHG was added at concentrations of 0.2, 0.5, 1, 2, 5, and 10% (w/w) as an antimicrobial additive. The ENR blend with 10% (w/w) CHG showed the best tensile strength, elastic recovery, and Shore A hardness. The ENR/CHG blend exhibited a smooth fracture surface. The appearance of a new peak in the Fourier transform infrared spectrum confirmed that the amino groups of CHG reacted with the epoxy groups of ENR. The ENR with 10% CHG exhibited an inhibition zone against Staphylococcus aureus. The proposed blending improved the mechanical properties, elasticity, morphology, and antimicrobial properties of the ENR.

Abstract Background This study aimed to isolate a novel thermotolerant bacterium that is capable of synthesizing polyhydroxyalkanoate from glycerol under high temperature conditions. Results A newly thermotolerant polyhydroxyalkanoate (PHA) producing bacterium, Cupriavidus sp. strain CB15, was isolated from corncob compost. The potential ability to synthesize PHA was confirmed by detection of PHA synthase (phaC) gene in the genome. This strain could produce poly(3-hydroxybutyrate) [P(3HB)] with 0.95 g/L (PHA content 75.3 wt% of dry cell weight 1.24 g/L) using glycerol as a carbon source. The concentration of PHA was enhanced and optimized based on one-factor-at-a-time (OFAT) experiments and response surface methodology (RSM). The optimum conditions for growth and PHA biosynthesis were 10 g/L glycerol, 0.78 g/L NH4Cl, shaking speed at 175 rpm, temperature at 45 °C, and cultivation time at 72 h. Under the optimized conditions, PHA production was enhanced to 2.09 g/L (PHA content of 74.4 wt% and dry cell weight of 2.81 g/L), which is 2.12-fold compared with non-optimized conditions. Nuclear magnetic resonance (NMR) analysis confirmed that the extracted PHA was a homopolyester of 3-hydyoxybutyrate. Conclusion Cupriavidus sp. strain CB15 exhibited potential for cost-effective production of PHA from glycerol.

Coffee silverskin (CS), a by-product of the coffee roasting process, has high protein content (16.2−19.0%, w/w), making it a potential source for plant protein and bioactive peptide production. This study aims to develop innovative extraction methods for phenolic compounds and proteins from CS. The conditions for hydrothermal (HT) extraction of phenolic compounds from CS were optimized by varying CS loading (2.5−10%, w/v), temperature (110−130 °C), and time (5−30 min) using a one-factor-at-a-time (OFAT) approach. The highest TPC of 55.59 ± 0.12 µmole GAE/g CS was achieved at 5.0% (w/v) CS loading and autoclaving at 125 °C for 25 min. Following hydrothermal extraction, CS protein was extracted from HT-extracted solid fraction by microwave-assisted alkaline extraction (MAE) using 0.2 M NaOH at 90 W for 2 min, resulting in a protein recovery of 12.19 ± 0.39 mg/g CS. The CS protein was then subjected to enzymatic hydrolysis using protease from Bacillus halodurans SE5 (protease_SE5). Protease_SE5-derived CS protein hydrolysate had a peptide concentration of 0.73 ± 0.09 mg/mL, with ABTS, DPPH, and FRAP values of 15.71 ± 0.10, 16.63 ± 0.061, and 6.48 ± 0.01 µmole TE/mL, respectively. Peptide identification by LC-MS/MS revealed several promising biological activities without toxicity or allergenicity concerns. This study’s integrated approach offers a sustainable and efficient method for extracting valuable compounds from CS, with potential applications in the food and pharmaceutical industries.

Abstract Cassava starch was blended with glycerol to prepare thermoplastic starch (TPS). Thermoplastic starch was premixed with sericin (TPSS) by solution mixing and then melt-blended with polyethylene grafted maleic anhydride (PEMAH). The effect of sericin on the mechanical properties, morphology, thermal properties, rheology, and reaction mechanism was investigated. The tensile strength and elongation at break of the TPSS10/PEMAH blend were improved to 12.2 MPa and 100.4%, respectively. The TPS/PEMAH morphology presented polyethylene grafted maleic anhydride particles (2 μm) dispersed in the thermoplastic starch matrix, which decreased in size to approximately 200 nm when 5% sericin was used. The melting temperature of polyethylene grafted maleic anhydride (121 °C) decreased to 111 °C because of the small crystal size of the polyethylene grafted maleic anhydride phase. The viscosity of TPS/PEMAH increased with increasing sericin content because of the chain extension. Fourier-transform infrared spectroscopy confirmed the reaction between the amino groups of sericin and the maleic anhydride groups of polyethylene grafted maleic anhydride. This reaction reduced the interfacial tension between thermoplastic starch and polyethylene grafted maleic anhydride, which improved the compatibility, mechanical properties, and morphology of the blend.

Abstract A mixture of corn starch and glycerol plasticizer (CSG) was blended with latex natural rubber (LNR) and carboxymethyl cellulose (CMC). The addition of 10 phr of CMC improved the Young’s modulus (6.7 MPa), tensile strength (8 MPa), and elongation at break (80%) of the CSG/LNR blend. The morphology of the CSG/LNR/CMC blends showed a uniform distribution of LNR particles (1–3 µm) in the CSG matrix. The addition of CMC enhanced the swelling ability and water droplet contact angle of the blends owing to the swelling properties, interfacial crosslinking, and amphiphilic structure of CMC. Fourier transform infrared spectroscopy confirmed the reaction between the C=C bond of LNR and the carboxyl groups (–COO−) of CMC, in which the Na+ ions in CMC acted as a catalyst. Notably, the mechanical properties of the CSG/LNR/CMC blend were improved owing to the miscibility of CSG/CMC and the CMC/LNR interfacial reaction. The CSG/LNR/CMC biodegradable polymer with high mechanical properties and interfacial tension can be used for packaging, agriculture, and medical applications.

Conversion of Pennisetum purpureum × Pennisetum americanum (Napier Pak Chong1) press cake into biobutanol using Clostridium beijerinckii TISTR 1461 was proposed as an alternative to combustion in this study. The optimum conditions for biobutanol fermentation were determined using a full factorial design and a central composite design of experiment. The studied factors were initial pHs (5.50–6.50) and sugar concentrations (40–60 g/L), while butanol yield (g/g reducing sugar utilized) was specified as the optimization response. The results showed that the suitable enzyme loading of alkali-pretreated press cake (at 3% w/w NaOH, 10% substrate loading, boiling at 90 °C, with a reaction time of 1 h) was 10 FPU/g biomass, which provided a glucose yield of 345 mg/g pretreated press cake. The optimized pH and reducing sugar concentration were 6.08 and 43 g/L, respectively. At these conditions, the maximum butanol yield from the hydrolysate of NaOH-pretreated press cake was 0.135 g/g reducing sugar utilized (0.30 g/g glucose utilized). Apart from the possibility of generating much less pollution, it was estimated that using the same amount of press cake, butanol production could possibly have a value comparable to that obtained from combustion for electricity production. A new concept for overall Napier Pak Chong1 grass utilization was also presented.

Abstract The (R)-phenylacetylcarbinol (PAC) batch biotransformation kinetics for partially purified Candida tropicalis TISTR 5350 pyruvate decarboxylase (PDC) were determined to validate a comprehensive mathematical model in 250 mL scale with 250 mM phosphate buffer/pH 7.0. PDC could convert initial 100/120 mM benzaldehyde/pyruvate substrates to the statistical significantly highest (p ≤ 0.05) maximum PAC concentration (95.8 ± 0.1 mM) and production rate (0.639 ± 0.001 mM min−1). A parameter search strategy aimed at minimizing overall residual sum of square (RSS T ) based on a system of six ordinary differential equations was applied to PAC biotransformation profiles with initial benzaldehyde/pyruvate concentration of 100/120 and 30/36 mM. Ten important biotransformation kinetic parameters were then elucidated including the zeroth order activation rate constant due to phosphate buffer species (k a ) of (9.38 ±

Prebiotics are functional food ingredients that assist probiotic growth and render many other health benefits. Mango peel is the biomass of the processing industry and has recently been value-added as a dietary fiber pectin. Besides its general use as a food additive, mango peel pectin (MPP) is partially hydrolyzed by pectinase to obtain pectic oligosaccharides (POSs) that have recently gained attention as novel prebiotic products and in medical research. This review describes probiotic candidates responsible for the digestion of pectin derivatives and the advantages of POSs as functional additives and their current best retrieval options. Mango pectic oligosaccharide (MPOS) recovery from low methoxyl MPP from mango with prebiotic performance both in vivo and in vitro environments is discussed. Current research gaps and potential developments in the field are also explored. The overall worthiness of this article is the potential use of the cheap-green food processing bioresource for high-value components.

ABSTRACT: A blend of cassava starch (CS), carboxymethyl cellulose (CMC), and paraffin was prepared as a coating material to maintain the quality of eggs during 4 wk of storage at different temperatures. The efficacy of the CS/CMC/paraffin (6/1/0.5% w/v) coating was investigated in terms of the Haugh unit (HU), weight loss, pH, and microbial load at the end of storage. The best egg storage temperature was 4°C, which maintained an HU of grade AA in coated and uncoated eggs for 4 wk. Lower weight loss (2.14%) was observed in coated eggs at 4°C storage than at 30°C storage (3.26%). The pH in the albumen of coated and uncoated eggs at 4°C increased from 6.84 to 6.88 and 7.01 to 7.03, respectively, after 4 wk of storage. No microbes were detected in the coated and uncoated eggs at 4°C. The maximum microbial count was 728 ± 35 cfu/mL in uncoated eggs at 30°C storage. Egg coating prevented microbial contamination of eggs stored at 30°C for 4 wk. The freshness of the eggs did not affect the nutrient content. The egg-coating material effectively maintained egg quality, prevented microbial contamination of eggs, and increased the shelf life of eggs at storage temperatures of 25 and 30°C.

Viral infections may cause serious human diseases. For instance, the recent appearance of the novel virus, SARS-CoV-2, causing COVID-19, has spread globally and is a serious public health concern. The consumption of healthy, proper, functional, and nutrient-rich foods has an important role in enhancing an individual's immune system and preventing viral infections. Several polysaccharides from natural sources such as algae, bacteria, and fungi have been considered as generally recognized as safe (GRAS) by the US Food and Drug Administration. They are safe, low-toxicity, biodegradable, and have biological activities. In this review, the bioactive polysaccharides derived from various microorganisms, including bacteria, fungi, and algae were evaluated. Antiviral mechanisms of these polysaccharides were discussed. Finally, the potential use of microbial and algal polysaccharides as an antiviral and immune boosting strategy was addressed. The microbial polysaccharides exhibited several bioactivities, including antioxidant, anti-inflammatory, antimicrobial, antitumor, and immunomodulatory activities. Some microbes are able to produce sulfated polysaccharides, which are well-known to exert a board spectrum of biological activities, especially antiviral properties. Microbial polysaccharide can inhibit various viruses using different mechanisms. Furthermore, these microbial polysaccharides are also able to modulate immune responses to prevent and/or inhibit virus infections. There are many molecular factors influencing their bioactivities, e.g., functional groups, conformations, compositions, and molecular weight. At this stage of development, microbial polysaccharides will be used as adjuvants, nutrient supplements, and for drug delivery to prevent several virus infections, especially SARS-CoV-2 infection.

The relationship between the phenotypic and chemical composition of local Andrographis paniculata was evaluated in this study. Five seed collections were sourced from different regions of Thailand, namely Kamphaeng Saen (KS), Udon Thani (UT), Chiang Rai (CR), Chiang Mai (CM), and Ratchaburi (RB). They were cultivated in the same conditions, potted, and partially shaded (60%) in an open conventional greenhouse. The phenology and chemical composition of these plants were assessed at the commercial harvesting stage (ca. 90 days after planting). The results indicated that UT was morphologically distinctive, illustrating the highest edible biomass yield (aerial and mature leaf size). The above-ground parts (viz., leaves and stem) were then analyzed for bioactive compounds after maceration with 80% (w/w) ethanol. It was found that the highest lactone content (~14 mg/g extract) was obtained from leaf and stem extracts of all samples except KS. Nonetheless, total phenolics and flavonoids in the stem extract of KS were found to be the highest at 3.22 and 2.42 mg/g, respectively. Phytochemicals from both leaf and stem extracts were capable of high anti-oxidant activity (~70%) as determined by DPPH and ABTS assays. Chemically, RB contained the highest 14-deoxy-11,12-didehydroandrographolide (156.98 mg/g extract), while UT and CM contained up to 0.68 mg/g extract of neoandrographolide. Classification of the samples indicated a clear relationship between the morphological traits and chemical compositions. In conclusion, our findings suggest the variations in phenotypic and chemotypic relations across the different landraces of A. paniculata. In essence, the quantity of the consumable parts was essentially the marker to describe the quality of the phytochemical constituents. The overall outcome of this study was to select the physiological characteristics that could be used for further breeding programs of the ideal variety with high productivity and higher bioactive(s) content.

Mycotoxin-contaminated feeds may negatively affect broiler chickens’ health; hence, a sustainable approach to achieve mycotoxin elimination is necessary. This study aimed to evaluate the efficacy of red yeast (Sporidiobolus pararoseus; RY) as a novel mycotoxin binder in broilers. A total of 1440 one-week-old male broiler chicks were randomly assigned to 12 treatments in a 3 × 4 factorial design. The dietary treatments included three levels of mycotoxin-contaminated diets (0 µg kg−1 (0% of mycotoxin; MT), 50 µg kg−1 (50% MT), and 100 µg kg−1 (100% MT)) and four levels of mycotoxin binders (0.0 and 0.5 g kg−1 commercial binder, and 0.5 and 1.0 g kg−1 RY). Experimental diets were contaminated with aflatoxin B1, zearalenone, ochratoxin A, T-2 toxin, and deoxynivalenol in the basal diet. Furthermore, the parameters including feed intake, body weight, and mortality rate were recorded on a weekly basis. After feeding for 28 days, blood and organ samples were collected randomly to determine the blood biochemistry, relative organ weights, and gut health. The results indicated that mycotoxin-contaminated diets reduced the average daily weight gain (ADG), villus height (VH), and villus height per the crypt depth ratio (VH:CD) of the intestine, as well as the population of Lactobacillus sp. and Bifidobacterium sp. in the cecal (p < 0.05), whereas they increased the mycotoxins concentration in the blood samples and the apoptosis cells (TUNEL positive) in the liver tissue (p < 0.01) of broiler chicken. In contrast, RY-supplemented diets had better ADG values and lower chicken mortality rates (p < 0.05). Moreover, these combinations positively impacted the relative organ weights, blood parameters, bacteria population, intestinal morphology, and pathological changes in the hepatocytes (p < 0.05). In conclusion, RY supplementation effectively alleviated the toxicity that is induced by AFB1 and OTA, mainly, and could potentially be applied as a novel feed additive in the broiler industry.

We describe the effect of enzyme (protease M) addition on reducing turbidity and self-flocculating of solid particles (mainly starch) in the drainage water after boiling a type of wheat-flour noodle (DWBWN) without the addition of flocculants to decrease waste-water-treatment costs to reuse the content of such drainage water. Reduction in turbidity and flocculation/sedimentation of solid particles in DWBWN are highly dependent on enzyme addition/concentration and pH level. We conducted experiments to determine the effect of adding protease to DWBWN. A decrease in turbidity of over 90% was observed in protease-added DWBWN. A decrease in total carbon (TC) of approximately 40% in the clear upper portion of DWBNW was also observed after protease addition and sedimentation. This TC was almost the same as with the supernatant of stock DWBWN without protease addition after centrifuging. Adding protease to DWBWN decreased the protein content, strengthened the negative surface electron charge, and decreased the isoelectric point of the solid particles. To determine the dissociation of phosphate ions in relation to reduction in turbidity and flocculation/sedimentation of solid particles, these processes were observed at the same pH level of a specific dissociate form of phosphorylated (mono-ester phosphates) starch in solid particles. This suggest that the strong negative zeta-potential of solid particles formed in DWBWN reduce turbidity, and flocculation/sedimentation of solid particles depends on the electrostatic properties.

Red yeast Sporidiobolus pararoseus KM281507 has been recognized as a potential feed additive. Beyond their nutritional value (carotenoids and lipids), red yeast cells (RYCs) containing high levels of β-glucan can bind mycotoxins. This study investigated the industrial feasibility of the large-scale production of RYCs, along with their ability to act as a mycotoxin binder. Under a semi-controlled pH condition in a 300 L bioreactor, 28.70-g/L biomass, 8.67-g/L lipids, and 96.10-mg/L total carotenoids were obtained, and the RYCs were found to contain 5.73% (w/w) β-glucan. The encapsulated RYC was in vitro tested for its mycotoxin adsorption capacity, including for aflatoxin B1 (AFB1), zearalenone (ZEA), ochratoxin A (OTA), T-2 toxin (T-2) and deoxynivalenol (DON). The RYCs had the highest binding capacity for OTA and T-2 at concentrations of 0.31–1.25 and 0.31–2.5 µg/mL, respectively. The mycotoxin adsorption capacity was further tested using a gastrointestinal poultry model. The adsorption capacities of the RYCs and a commercial mycotoxin binder (CMB) were comparable. The RYCs not only are rich in lipids and carotenoids but also play an important role in mycotoxin binding. Since the industrial-scale production and downstream processing of RYCs were successfully demonstrated, RYCs could be applied as possible feed additives.

Basils of the genus Ocimum are aromatic plants grown widely throughout the tropical and temperate regions. The essential oils obtained from their aerial parts are enriched with volatile organic compounds with high market demand for food and pharmaceutical industries. The volatile organic compounds have been shown to exhibit biological activities. Therefore, their novel applications have been extensively explored in the last few decades. The most widely available basils in the tropical areas include white holy basil (O. sanctum var. Shyama), red holy basil (O. sanctum var. Rama), Thai basil (O. basilicum var. thyrsiflorum), lemon basil (O. citriodorum), and tree basil (O. gratissimum). Over 60 volatiles of different classes have been exclusively described, and some of them could be useful as biomarkers for genotype specification. The major volatile ingredient is the phenylpropanoids, such as methyl eugenol, which has the potential as a natural product for mitigating Oriental fruit fly (Bactrocera dorsalis) during tropical fruit production. Moreover, basil essential oils are also used to control diseases of the fruits during post-harvest storage. As a result, the application of basil essential oils as a sustainable defect control strategy for tropical fruit value chains seems intriguing. This review provides comprehensive information on plant taxonomy and volatile compositions of the essential oil fractions from different basil species. Their biological activities and applications are also discussed, mainly during the pre- and post-production of tropical fruits. Additionally, the available techniques to enhance the efficacy of the volatile active compounds are also described.

Carboxymethyl rice starch films were prepared from carboxymethyl rice starch (CMSr) treated with sodium hydroxide (NaOH) at 10–50% w/v. The objective of this research was to determine the effect of NaOH concentrations on morphology, mechanical properties, and water barrier properties of the CMSr films. The degree of substitution (DS) and morphology of native rice starch and CMSr powders were examined. Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and differential scanning calorimetry (DSC) were used to investigate the chemical structure, crystallinity, and thermal properties of the CMSr films. As the NaOH concentrations increased, the DS of CMSr powders increased, which affected the morphology of CMSr powders; a polyhedral shape of the native rice starch was deformed. In addition, the increase in NaOH concentrations of the synthesis of CMSr resulted in an increase in water solubility, elongation at break, and water vapor permeability (WVP) of CMSr films. On the other hand, the water contact angle, melting temperature, and the tensile strength of the CMSr films decreased with increasing NaOH concentrations. However, the tensile strength of the CMSr films was relatively low. Therefore, such a property needs to be improved and the application of the developed films should be investigated in the future work.

Nowadays, industrial poultry producers are more focused on the safety of their products, especially contaminants from feedstuffs such as mycotoxin and pesticides. The residue from animal production using antibiotic growth promoters (AGPs) may cause some problems with antimicrobial resistance in human and animals. Red yeast (Sporidiobolus pararoseus) has a cell wall consisting of β-glucan and mannan-oligosaccharides and pigments from carotenoids that may be suitable for use as a substitute for AGPs. The objective was to evaluate the effects of red yeast in laying hen diets on productive performance, egg quality, and duodenal health. A total of 22-week-old laying hens (n = 480) were divided into five groups: control diet (CON), AGP at 4.5 g/kg and red yeast supplementation at 1.0 (RY1.0), 2.0 (RY2.0) and 4.0 g/kg (RY4.0) of diet. The results show that the AGP, RY2.0, and RY4.0 groups had significantly higher final body weight compared with the other groups (p < 0.001). The red yeast supplementation improved the egg shape index (p = 0.025), Haugh unit (p < 0.001), and yolk color (p = 0.037), and decreased yolk cholesterol (p < 0.001). Diet with red yeast supplementation improved villus height to crypt depth ratio and crypt cell proliferations. In conclusion, red yeast supplementation at 2.0 g/kg of diet can substitute AGP in layer diet.

Different proteases can be applied to produce certain bioactive peptides. This study focused on the effects of some commercial proteases and drying processes on the physical, chemical, and biological properties of chicken breast hydrolysates (CBH). Chicken breast hydrolyzed with Alcalase® presented a higher degree of hydrolysis (DH) than papain. Moreover, the treatment with Alcalase®, followed by papain (A-P), was more proficient in producing antioxidant activities than a single enzyme treatment. Conditions comprising 0.63% Alcalase® (w/w) at pH 8.0 and 52.5 °C for 3 h, followed by 0.13% papain (w/w) at pH 6.0 and 37 °C for 3 h, resulted in the highest yields of DH and peptide contents. The spray-dried microencapsulated powder improved the physicochemical properties including moisture content, color measurement, solubility, and particle morphology. In summary, the dual enzyme application involving the hydrolysis of Alcalase® and papain, coupled with the spray-drying process, could be used to produced antioxidant CBH.

This research examined the changes of black garlic (BG) quality attributes when raw materials of different initial moisture contents (iMC) were used. Fresh garlic bulbs (cv. Thai) were shade-dried for eight weeks at a controlled condition at 29 °C and relative humidity (RH) of 55% to the desired iMC (ranging from ca. 50–70%). BG processing was at 75 °C, RH = 80% for ten days. After processing, physiological characteristics and chemical properties of garlic were determined. Results illustrated that fresh garlic with higher moisture content (ca. 70%) resulted in BG of a dark brown colour, sloppy texture, and lesser acidity (pH = 4.44), while samples with lower iMCs (

An egg-coating material was developed to extend the shelf-life and freshness of eggs by blending cassava starch (CS) with gelling agents and waxes. The effects of the properties of this egg coating on egg quality were investigated. Hydroxypropyl methylcellulose (HPMC), carboxymethyl cellulose (CMC), beeswax, and paraffin wax were used. CS blended with low-molecular-weight paraffin (Paraffin(L)) and CMC coating material displayed a tensile strength of 4 MPa, 34% elongation at break, 0.0039 g day−1 m−2 water vapor permeability, and a water contact angle of 89° at 3 min. Eggs coated with CS/CMC/Paraffin(L) solutions had a Haugh unit value of 72 (AA grade) and exhibited a weight loss of 2.4% in 4 weeks. CMC improved the compatibility of CS and Paraffin(L). This improvement and the hydrophobicity of Paraffin(L) provided suitable mechanical and water-resistance properties to the coating material that helped to maintain the quality of the coated AA-grade eggs with low weight loss for 4 weeks.

Concerns regarding the overconsumption of natural resources has provoked the recovery of biopolymers from food processing biomass. Furthermore, the current market opportunity for pectin in other areas has increased, necessitating the search for alternative pectin resources. This is also a step towards the sustainable and circular green economy. Mango peel is the byproduct of agro-processing and has been used for high value-added components such as polysaccharide biopolymers. Pectin derived from the peel is yet to be exploited to its greatest extent, particularly in terms of its separation and physiochemical properties, which limit its applicability to dietary fiber in culinary applications. The functionality of the mango peel pectin (MPP) strongly depends on the molecular size and degree of esterification which highlight the importance of isolation and characterisation of pectin from this novel resource. This article therefore provides a useful overview of mango peel as a potential biomaterial for the recovery of MPP. Different extraction techniques and the integrated recovery were also discussed. The utilisation of MPP in different industrial schemes are also detailed out from different perspectives such as the pharmaceutical and biotechnology industries. This review convincingly expresses the significance of MPP, providing a sustainable opportunity for food and pharmaceutical development.

This study investigated the effect of chitosan particle sizes on the properties of carboxymethyl chitosan (CMCh) powders and films. Chitosan powders with different particle sizes (75, 125, 250, 450 and 850 µm) were used to synthesize the CMCh powders. The yield, degree of substitution (DS), and water solubility of the CMCh powders were then determined. The CMCh films prepared with CMCh based on chitosan with different particle sizes were fabricated by a solution casting technique. The water solubility, mechanical properties, and water vapor transmission rate (WVTR) of the CMCh films were measured. As the chitosan particle size decreased, the yield, DS, and water solubility of the synthesized CMCh powders increased. The increase in water solubility was due to an increase in the polarity of the CMCh powder, from a higher conversion of chitosan into CMCh. In addition, the higher conversion of chitosan was also related to a higher surface area in the substitution reaction provided by chitosan powder with a smaller particle size. As the particle size of chitosan decreased, the tensile strength, elongation at break, and WVTR of the CMCh films increased. This study demonstrated that a greater improvement in water solubility of the CMCh powders and films can be achieved by using chitosan powder with a smaller size.

This study aimed to select thermotolerant yeast for bioethanol production from cellulose-rich corncob (CRC) residue. An effective yeast strain was identified as Saccharomyces cerevisiae TC-5. Bioethanol production from CRC residue via separate hydrolysis and fermentation (SHF), simultaneous saccharification and fermentation (SSF), and prehydrolysis-SSF (pre-SSF) using this strain were examined at 35–42 °C compared with the use of commercial S. cerevisiae. Temperatures up to 40 °C did not affect ethanol production by TC-5. The ethanol concentration obtained via the commercial S. cerevisiae decreased with increasing temperatures. The highest bioethanol concentrations obtained via SHF, SSF, and pre-SSF at 35–40 °C of strain TC-5 were not significantly different (20.13–21.64 g/L). The SSF process, with the highest ethanol productivity (0.291 g/L/h), was chosen to study the effect of solid loading at 40 °C. A CRC level of 12.5% (w/v) via fed-batch SSF resulted in the highest ethanol concentrations of 38.23 g/L. Thereafter, bioethanol production via fed-batch SSF with 12.5% (w/v) CRC was performed in 5-L bioreactor. The maximum ethanol concentration and ethanol productivity values were 31.96 g/L and 0.222 g/L/h, respectively. The thermotolerant S. cerevisiae TC-5 is promising yeast for bioethanol production under elevated temperatures via SSF and the use of second-generation substrates.

Red yeast (Sporidiobolus pararoseus), obtained from glycerol waste in the biodiesel process, has been used as a mycotoxin sorbent in some agricultural products. This study focused on the antigenotoxic effects of red yeast on aflatoxin B1 (AFB1)-induced mutagenesis, using a Salmonella mutation assay and a rat liver micronucleus test. Red yeast was sequentially extracted to obtain hexane, acetone, hot water, and residue fractions. Carbohydrates were mainly found in hot water extract (HWE), while proteins were observed in the residue fraction. The amount of lycopene in hexane extract (HE) was higher than the amount of β-carotene in HE. All red yeast extracts were not mutagenic in the Salmonella typhimurium strains TA98 and TA100 under the presence and absence of metabolic activation. Among the extracts obtained from red yeast, HE presented the strongest antimutagenicity against AFB1-induced mutagenesis in both strains, but HWE did not show any antimutagenicity. The oral administration of red yeast, HE, and HWE for 28 days was further investigated in rats. These extracts did not induce micronucleated hepatocytes. Furthermore, they modulated the activities of some detoxifying enzymes but did not alter the activities of various cytochrome P450 isozymes. Notably, they significantly decreased hepatic micronucleus formation in AFB1-initiated rats. HE altered the activity of hepatic glutathione-S-transferase but did not affect its protein expression. Taken together, the antigenotoxicity of red yeast against AFB1-induced mutagenesis might be partly due to the modulation of some detoxifying enzymes in AFB1 metabolism. β-Carotene and lycopene might be promising antigenotoxic compounds in red yeast.

The effect of ultrasonication on the antioxidant and antibacterial properties of Ceylon spinach (Basella alba) extracts (CE) and the shelf life of chilled pork with CE were studied. The CE were ultrasonicated at different power levels (60–100%) for 10–40 min in an ultrasonic bath with the rise of antioxidant activities (p ≤ 0.05) proportional to the ultrasonication time. The additional investigation of antibacterial activities showed that the ultrasonicated extracts (100 mg/mL) could inhibit and inactivate Staphylococcus aureus and Escherichia coli with the optimal condition of 80% power for 40 min. For shelf life testing, fresh pork treated with the ultrasonicated extracts at 100 and 120 mg/mL had lower values of thiobarbituric acid reactive substances (TBARS) than the control (without dipping). For food safety as measured by the total microbial count, the fresh pork dipped with 100–120 mg/mL CE extract could be kept at 0 °C for 7 days, 2 to 3 days longer than control meat at 0 and 4 °C, respectively. A sensory evaluation using a nine-point hedonic scale showed that fresh pork dipped with 100-mg/mL CE extracts was accepted by consumers. It is suggested that CE extracts can be applied in the food industry to enhance the quality and extend the shelf life of meat products.

Curcumin is a phenolic compound derived from turmeric roots (Curcuma longa L.). This research studied the effects of curcumin extract on the properties of chitosan films. The film characteristics measured included mechanical properties, visual aspects, color parameters, light transmission, moisture content, water solubility, water vapor permeability, infrared spectroscopy, and antioxidant activity. The results suggest that adding curcumin to chitosan-based films increases yellowness and light barriers. Infrared spectroscopy analysis showed interactions between the phenolic compounds of the extract and the chitosan, which may have improved the mechanical properties and reduced the moisture content, water solubility, and water vapor permeability of the films. The antioxidant activity of the films increased with increasing concentrations of the curcumin extract. This study shows the potential benefits of incorporating curcumin extract into chitosan films used as active packaging.

Nata de coco has been used as a raw material for food preparation. In this study, the production of carboxymethyl cellulose (CMC) film from nata de coco and the effect of monochloroacetic acid on carboxymethyl bacterial cellulose (CMCn) and its film were investigated. Bacterial cellulose from nata de coco was modified into CMC form via carboxymethylation using various concentrations of monochloroacetic acid (MCA) at 6, 12, 18, and 24 g per 15 g of cellulose. The results showed that different concentrations of MCA affected the degree of substitution (DS), chemical structure, viscosity, color, crystallinity, and morphology of CMCn. The optimum treatment for carboxymethylation was found using 24 g of MCA per 15 g of cellulose, which provided the highest DS at 0.83. The morphology of CMCn was related to DS value; a higher DS value showed denser and smoother surface than nata de coco cellulose. The various MCA concentrations increased the mechanical properties (tensile strength and percentage of elongation at break) and water vapor permeability of CMCn, which were related to the DS value.

Bacterial cellulose from nata de coco was prepared from the fermentation of coconut juice with Acetobacter xylinum for 10 days at room temperature under sterile conditions. Carboxymethyl cellulose (CMC) was transformed from the bacterial cellulose from the nata de coco by carboxymethylation using different concentrations of sodium hydroxide (NaOH) and monochloroacetic acid (MCA) in an isopropyl (IPA) medium. The effects of various NaOH concentrations on the degree of substitution (DS), chemical structure, viscosity, color, crystallinity, morphology and the thermal properties of carboxymethyl bacterial cellulose powder from nata de coco (CMCn) were evaluated. In the carboxymethylation process, the optimal condition resulted from NaOH amount of 30 g/100 mL, as this provided the highest DS value (0.92). The crystallinity of CMCn declined after synthesis but seemed to be the same in each condition. The mechanical properties (tensile strength and percentage of elongation at break), water vapor permeability (WVP) and morphology of CMCn films obtained from CMCn synthesis using different NaOH concentrations were investigated. The tensile strength of CMCn film synthesized with a NaOH concentration of 30 g/100 mL increased, however it declined when the amount of NaOH concentration was too high. This result correlated with the DS value. The highest percent elongation at break was obtained from CMCn films synthesized with 50 g/100 mL NaOH, whereas the elongation at break decreased when NaOH concentration increased to 60 g/100 mL.

Fructooligosaccharides (FOS) are considered prebiotics and have been widely used in various food industries as additives. Ultrasonication has been widely used to enhance food processes; however, there are few reports on ultrasound-assisted FOS synthesis. In the present study, FOS were produced from brown sugar using ultrasonication combined with microbubbles, and the production was optimised using a Box-Behnken experimental design. Here we showed that a combination of ultrasonication and microbubbles could boost the enzyme activity by 366%, and the reaction time was shortened by 60%. The reaction time was a significant variable affecting the FOS production. The optimum conditions were 5 min 45 s of ultrasonication and 7 min 19 s of microbubbles with a reaction time of 5 h 40 min. The maximum enzyme activity and total FOS yield were 102.51 ± 4.69 U·mL−1 and 494.89 ± 19.98 mg·g−1 substrate, respectively. In an enlarged production scale up to 5 L, FOS yields were slightly decreased, but the reaction time was decreased to 4 h. Hence, this technique offers a simple and useful tool for enhancing enzyme activity and reducing reaction time. We have developed a pilot technique as a convenient starting point for enhancing enzyme activity of oligosaccharide production from brown sugar.

Cellulose from Asparagus officinalis stalk end was extracted and synthesized to carboxymethyl cellulose (CMCas) using monochloroacetic acid (MCA) via carboxymethylation reaction with various sodium hydroxide (NaOH) concentrations starting from 20% to 60%. The cellulose and CMCas were characterized by the physical properties, Fourier Transform Infrared spectroscopy (FTIR), Differential scanning calorimetry (DSC), Scanning electron microscopy (SEM) and X-ray diffraction (XRD). In addition, mechanical properties of CMCas films were also investigated. The optimum condition for producing CMCas was found to be 30% of NaOH concentration for the carboxymethylation reaction, which provided the highest percent yield of CMCas at 44.04% with the highest degree of substitution (DS) at 0.98. The melting point of CMCas decreased with increasing NaOH concentrations. Crystallinity of CMCas was significantly deformed (p < 0.05) after synthesis at a high concentration. The L* value of the CMCas was significantly lower at a high NaOH concentration compared to the cellulose. The highest tensile strength (44.59 MPa) was found in CMCas film synthesized with 40% of NaOH concentration and the highest percent elongation at break (24.99%) was obtained in CMCas film treated with 30% of NaOH concentration. The applications of asparagus stalk end are as biomaterials in drug delivery system, tissue engineering, coating, and food packaging.

Consumption of pigmented rice as a staple food is rapidly increasing due to their healthy prospective and considered as functional food ingredients. Greater interest has been shown in many color rice varieties due to their multiple biological activities. The phenolic compounds have been found to consist of anthocyanidins, ferulic acid, diferulates, anthocyanins and polymeric proanthocyanidins. Anthocyanin is located in the bran layers of the rice kernel, while phenolic acids are mainly present in the bran layers of rice, existing as free, conjugated and bound forms. Keeping in view the several health benefits associated with the functional ingredients, such as anti-inflammatory, antioxidative and anticancer effects, pigmented rice is considered as a functional food and food ingredient in many Asian countries. The application and incorporation of bran into food products for the preparation of functional foods is increasing. Within the scope of this review, we highlighted the significant bioactive compounds from pigmented rice varieties and their potentials for medicinal and nutraceutical ingredients. The information provided from this could be of high benefit to the functional food industry and further research advance medicinal products.

The aim of this work was to synthesize carboxymethyl cellulose (CMC) and produce CMC films from the cellulose of palm bunch and bagasse agricultural waste. The effect of various amounts of H2O2 (0–40% v/v) during delignification on the properties of cellulose, CMC, and CMC films was studied. As the H2O2 content increased, yield and the lignin content of the cellulose from palm bunch and bagasse decreased, whereas lightness (L*) and whiteness index (WI) increased. FTIR confirmed the substitution of a carboxymethyl group on the cellulose structure. A higher degree of substitution of CMC from both sources was found when 20%–30% H2O2 was employed. The trend in the L* and WI values of each CMC and CMC film was related to those values in their respective cellulose. Bleaching each cellulose with 20% H2O2 provided the cellulose with the highest viscosity and the CMC films with the greatest mechanical (higher tensile strength and elongation at break) and soluble attributes, but the lowest water vapor barrier. This evidence indicates that cellulose delignification with H2O2 has a strong effect on the appearance and physical properties of both CMCs.