Search

In recent years, deep learning methods were good solutions for object detection in synthetic aperture radar (SAR) images. However, the problems of complex scenarios, large object scale differences and imperfect fine‐grained classification in ship detection were intractable. In response, an improved model GDB‐YOLOv5s (Improved YOLOv5s model incorporating global attention mechanism (GAM), DCN‐v2 and BiFusion) is designed. This model introduces deformable convolution networks (DCN‐v2) into the Backbone to enhance the adaptability of the receptive field. It replaces the original Neck's PANet structure with a BiFusion structure to better fuse the extracted multiscale features. Additionally, it integrates GAM into the network to reduce information loss and improve global feature interaction. Experiments were conducted on single‐class dataset SSDD and multi‐class dataset SRSSD‐V1.0. The results show that the GDB‐YOLOv5s model improves mean average precision scores (mAP) significantly, outperforming the original YOLOv5s model and other traditional methods. GDB‐YOLOv5s also improves Precision‐score (P) and Recall‐score (R) for fine‐grained classification to some extent, thereby reducing false alarms and missed detections. It has been proved that the improved model is relatively effective. [ABSTRACT FROM AUTHOR]

Glacier pattern changes directly indicate variability in local climatic circumstances. The present study dealt with the proposition and estimation of spatiotemporal glacier movement using a synthetic aperture radar-derived polarimetric tracking method which revealed improved estimates over four selected large tributary-bearing glaciers (Siachen, Bara Shigri, Gangotri, and Zemu) in the Indian Himalayas. The average estimated velocities in 2021–2022 for the four glaciers were 0.13, 0.06, 0.08 and 0.09 m/day. The thick debris cover hindered the movement temporally in the middle and lower reaches of the glaciers. The effect of meltwater influx along the tributary confluence zone was also witnessed over the glaciers. Comparison and validation with the US National Aeronautics and Space Administration (NASA) Inter-mission Time Series of Land Ice Velocity and Elevation (ITS_LIVE) products has shown the utility of the proposed method in studying the contributions of active feeding tributaries of the glaciers in the ablation zone. [ABSTRACT FROM AUTHOR]

Time series interferometric SAR (TSInSAR) techniques face challenges related to the availability of highly coherent point targets in non-urban, vegetated, and mountainous regions. In this study, we tested an improved TSInSAR approach with the help of distributed scatterers (DS) detected through the fast statistically homogeneous pixel selection (faSHP) approach and jointly processed with persistent scatterers (PS) within the interferometric point target analysis (IPTA) framework. The method is applied to a seismically active and highly gradient terrain to investigate the earthquake-induced active unstable slopes (AUS) in the Muzaffarabad-Balakot region of northern Pakistan, particularly using sixteen PALSAR-2 images acquired between October 2014 and May 2020. However, its effectiveness was also assessed by using Sentinel-1 data from the same time period. The quantitative assessment showed the effectiveness of the method in delineating the sliding surfaces of the unstable slopes and achieving approximately four times higher point density as compared to the standard PSI approach when applied to PALSAR-2 data and approximately nine times higher point targets when Sentinel-1 data is used. Exhibiting an average deformation rate varying between −40 mm yr−1 and 20 mm yr−1 along the line of sight (LOS) direction, the obtained results from PALSAR-2 data revealed the existence of 451 AUS in the region. The study also reports the discovery of a giant destabilized slope (~2.30 sq. km) located near Patika Village along the Neelam River. The majority of these unstable slopes are found at altitudes above 780 m, with slope angles ranging from 15 to 50 degrees. The study also found a significant correlation between deformation patterns and local precipitation. The rainwater gradually penetrates into the joints and cracks, accelerating the processes of deformation and slope failure. The research and its findings could help decision-making entities by providing first-hand information for managing the risks associated with slope failure. [ABSTRACT FROM AUTHOR]

Disturbances in the ionosphere can severely affect synthetic aperture radar (SAR) acquisition and also the accuracy of differential SAR interferometry (D-InSAR) techniques. Focusing on the mid-latitudes, we report for the first time the effect of small-scale ionospheric irregularities on the interferograms generated by the C-band Sentinel-1 satellite. The interferograms obtained during the geomagnetic storm on 4 November 2021 showed finger-like stripes of phase artefacts, while the interferograms obtained on non-storm days did not show such anomalies. Such phase artefacts introduce an error greater than ± 3π in the interferogram. By further checking the gridded total electron content (TEC) from the ground-based global navigation satellite system (GNSS) network, as well as the in-situ electron density measured by ESA's Swarm satellite, the finger-like stripes in the interferograms are found to be correlated with ionospheric bulge structures generated during the geomagnetic storm. Since both the interferogram stripes and the ionospheric bulges exhibit a comparable east-west extension, it is believed that the interferograms can also be used to reflect the small-scale structures of ionospheric bulge fringes. For example, in this case, the latitudinal width of each finger-like stripe reaches about 8 km. Our result implies that the C-band interferogram has the potential to probe the two-dimensional ionospheric structures with unprecedented resolution, which cannot be achievable by the gridded GNSS-TEC. [ABSTRACT FROM AUTHOR]

This research investigated the green gram crop by employing a time series of Sentinel-1A Single Look Complex (SLC) and Sentinel-2 datasets, which corresponded to different phenological growth stages of the crop. Field campaigns were conducted on the acquisition dates of Sentinel-1A datasets for the entire crop cycle to estimate crop height and soil moisture. In line with these observations, temporal variations in 10 salient Synthetic Aperture Radar (SAR) parameters, obtained from Sentinel-1A datasets, are systematically analysed, which elucidated the importance of dual-polarized SAR parameters in the diverse phenological growth stages of the crop. Moreover, the Normalized Difference Vegetation Index (NDVI) values from Sentinel-2 datasets, estimated at various green gram growth stages, are categorized into initial (NDVI $ \le $ ≤ 0.5), intermediate (0.5 $ \lt $ < NDVI $ \lt $ < 0.8), and maximum growth of the crop (NDVI $ \ge $ ≥ 0.8), which are then aligned with corresponding SAR and ground-measured parameters. The inversion model development and sensitivity analysis were carried out to correlate ground-measured parameters with SAR parameters across various growth stages based on the categorization of NDVI values as well as for the entire growing season of the crop. Backscattering intensities are found to have good sensitivity to crop height at its intermediate growth (r $ \ge $ ≥ 0.75). Among vegetation indices, the Polarimetric Radar Vegetation Index (PRVI) showed significant sensitivity to crop height in its intermediate growth stage (r $ \approx $ ≈ 0.77). H-A-Alpha decomposition parameters displayed notable sensitivity to soil moisture in the initial and maximum growth stages of green gram. This study demonstrates the effectiveness of Sentinel-1 dual-polarized SAR parameters in monitoring green gram phenological growth stages. The parameters show substantial sensitivity to both green gram height and soil moisture. [ABSTRACT FROM AUTHOR]

Estuaries and coasts runoff plays a crucial role in the dynamics of the ocean system. However, the current emphasis on synthetic aperture radar (SAR) retrieved current velocities has been on studying strong boundary currents and large-scale ocean circulation, resulting in relatively limited observational research on estuarine current velocities. This study aims to observe the current velocities in the Yangtze River estuary area using Sentinel-1A SAR data. The findings indicate a high agreement between the current velocities retrieved by Sentinel-1A and those observed at hydrographic stations, showcasing the characteristics of current velocity distribution associated with seafloor topography. This highlights the significant potential of SAR in observing estuarine current velocities, contributing to the analysis of benthic topography and the statistics of river runoff. [ABSTRACT FROM AUTHOR]

Contemporary synthetic aperture radar (SAR) image processing techniques face various challenges, particularly in ship detection, background noise reduction, and information preservation. To address these issues, this paper introduces a novel model we called SAR-ShipSwin, which combines the swin transformer and feature pyramid network as the backbone network structure, specifically designed for ship detection in SAR images. The backbone network optimizes computational efficiency and handles occlusion and overlap issues in SAR images successfully by introducing the improved window multi-head self-attention module. To further enhance recognition accuracy, we design the background modeling network, which efficiently identifies and eliminates complex background features. Additionally, we introduce the spatial intensity geometric pooling technique, a novel pooling strategy that preserves geometric and structural information of the original region of interest, significantly reducing information loss and distortion. Considering the diverse ship shapes in SAR images, we specially design the dynamic ship shape adaptive convolution module, which dynamically adjusts the shape of convolution kernels to better match the targets. The proposed model is validated on the SSDD and HRSID datasets, achieving state-of-the-art performance. [ABSTRACT FROM AUTHOR]

Sea state bias (SSB) is a crucial error of satellite radar altimetry over the ocean surface. For operational nonparametric SSB (NPSSB) models, such as two-dimensional (2D) or three-dimensional (3D) NPSSB, the solution process becomes increasingly complex and the construction of their regression functions pose challenges as the dimensionality of relevant variables increases. And most current SSB correction models for altimeters still follow those of traditional nadir radar altimeters, which limits their applicability to Synthetic Aperture Radar altimeters. Therefore, to improve this situation, this study has explored the influence of multi-dimensional SSB models on Synthetic Aperture Radar altimeters. This paper proposes a deep learning-based SSB estimation model called SNSSB, which employs a Siamese network framework, takes various multi-dimensional variables related to sea state as inputs, and uses the difference in sea surface height (SSH) at self-crossover points as the label. Experiments were conducted using Sentinel-6 self-crossover data from 2021 to 2023, and the model is evaluated using three main metrics: the variance of the SSH difference, the explained variance, and the SSH difference variance index (SVDI). The experimental results demonstrate that the proposed SNSSB model can further improve the accuracy of SSB estimation. On a global scale, compared to the traditional NPSSB, the multi-dimensional SNSSB not only decreases the variance of the SSH difference by over 11%, but also improves the explained variance by 5-10 cm2 in mid- and low-latitude regions. And the regional SNSSB also performs well, reducing the variance of the SSH difference by over 10% compared to the NPSSB. Additionally, the SNSSB model improves the computational efficiency by approximately 100 times. The favorable results highlight the potential of the multidimensional SNSSB in constructing SSB models, particularly the five-dimensional (5D) SNSSB, representing a breakthrough in overcoming the limitations of traditional NPSSB for constructing high-dimensional models. This study provides a novel approach to exploring the multiple influencing factors of SSB. [ABSTRACT FROM AUTHOR]

Land subsidence, marked by a decline in surface elevation, poses a significant threat to urban infrastructure and safety. Accurate subsidence information and a reliable prediction model are crucial for prevention and control. In this study, we used persistent scatterer interferometric synthetic aperture radar (PSInSAR) technology to obtain long-term land subsidence data and analyzed subsidence characteristics in Decheng District. By integrating hydrogeological and groundwater data, we developed a three-dimensional groundwater flow and one-dimensional compaction model through numerical simulation. Furthermore, the subsidence data monitored by PS-InSAR were used to further constrain and validate the model. The evolution trend of land subsidence under different groundwater exploitation scenarios was predicted and analyzed. The results showed that from May 2017 to December 2021, the cumulative maximum subsidence in Decheng District reached -173 mm. The subsidence area is mainly concentrated in the northern area, and its subsidence center is near Qiaoyuan Town. According to the Land Subsidence Prevention and Control Plan of Dezhou City, Shandong Province (2018-2025), we set up different groundwater mining scenarios with the goal that the rate of land subsidence in the key prevention and control area is less than 35 mm/yr in 2025.The Fluidsolid coupled model prediction analysis results indicated that a 30% reduction in groundwater exploitation is reasonable. [ABSTRACT FROM AUTHOR]

Efficient flood risk management hinges on the precise mapping and assessment of areas vulnerable to flooding. This research endeavors to advance the flood susceptibility mapping in Jeddah, Saudi Arabia by harnessing the long short-term memory (LSTM) algorithm enriched with two sophisticated metaheuristic optimizers: invasive weed optimization (IWO) and harmony search (HS). The process commenced with the utilization of synthetic aperture radar (SAR) imagery to construct a detailed flood inventory map. A comprehensive geodatabase encompassing various flood conditioning factors—encompassing lithology, land use, proximity to water bodies, hydrologic soil group (HSG), topographical features (such as slope, plan curvature, and aspect), and hydrological indices [including profile curvature, Topographic Wetness Index (TWI), flow accumulation, Topographic Position Index (TPI), altitude, Terrain Ruggedness Index (TRI), and Stream Power Index (SPI)] was meticulously curated. To develop the model, 70% of this dataset was employed, while the remaining 30% served to validate the predictive efficacy of the resultant flood susceptibility maps. These maps' accuracy was quantitatively gauged through the receiver operating characteristic curve and the area under the curve (AUC) statistics. Findings reveal that the integration of LSTM with IWO and HS metaheuristic algorithms significantly enhances accuracy (LSTM-IWO: AUC = 0.900; LSTM-HS: AUC = 0.876) in comparison to the standalone LSTM approach (AUC = 0.863). The implementation of these hybrid algorithms manifests as a potent and economically viable approach for detailed geospatial modeling of flood susceptibility, providing invaluable insights to bolster flood mitigation, preparedness, and emergency response strategies. [ABSTRACT FROM AUTHOR]

Spaceborne synthetic aperture radar (SAR) for measuring high winds is expected to reduce uncertainties in tropical cyclone (TC) intensity and structure estimation, yet the consistency of SAR observed winds equivalent to a 1-min sustained wind speed with the conventionally estimated 10-min maximum wind speed (Vmax10) remains to be assessed. This study compares SAR wind observations with western North Pacific best track estimates from the Japan Meteorological Agency (JMA) and the Joint Typhoon Warning Center (JTWC). Because SAR wind observations have a bias dependent on SAR incidence angle, a first order corrective term is proposed and used to correct SAR-derived maximum wind (SAR Vmax) tentatively. After this correction, conversion of SAR Vmax into SAR Vmax10 with Dvorak conversion tables revealed a mean difference between SAR Vmax10 and JMA Vmax10 (ΔVmax10) of -0.1 m s-1 and a mean absolute difference of 4.8 m s-1. ΔVmax10 is found to be correlated with current intensities and with subsequent intensity changes from the SAR observation time. Also, comparison of the JMA best track 50-kt wind radius (R50) with SAR wind speeds suggests that R50 is systematically underestimated. Aside from the SAR wind limitations, possible reasons for the observed discrepancies between SAR wind observations and best track estimates include biases in the Dvorak analysis and conventional surface wind products. Further accumulation of SAR wind observations with appropriate bias correction in the future is expected to contribute to a comprehensive evaluation and improvement of conventional Vmax estimation methods, which could also be useful to verify TC intensity forecasts. [ABSTRACT FROM AUTHOR]

Landslides in Alpine valleys pose significant hazards due to potential impacts on inhabited areas and landslide-dam formation. These valleys feature diverse glacial deposits (moraine, debris talus, and glacio-fluvio-lacustrine materials) with varying technical traits. A comprehensive study investigated a Carnic Alps landslide in northeastern Italy, focusing on moraine deposits. This entailed geological-geomorphological analyses, slope deformation monitoring, and utilisation of 2D and 3D stability models. The 19th-century landslide occurred in Tolmezzo, Friuli Venezia Giulia, and affected the Cazzaso village. Geological-geomorphological studies involved LiDAR-derived terrain models, borehole-based slope stratigraphy, and inclinometer-derived landslide characterisation. Deformation data combined GPS measurements and multi-temporal interferometric synthetic aperture radar. Reconstructing the slope's geological model, stability assessments employed 2D and 3D limit equilibrium methods, factoring in groundwater and seismicity. Validation occurred against monitoring data and geologicalgeomorphological observations. The 3D models further identified most landslidesusceptible zones. [ABSTRACT FROM AUTHOR]

Tomographic synthetic aperture radar is an advanced multi‐channel interferometric technique for retrieving 3‐D spatial information. It can be regarded as an inherently sparse reconstruction problem and can be solved using compressive sensing algorithms. However, the performances are limited by the number of acquisitions and suffer from computational burdens in practice. This paper proposes a novel method based on deep learning, which is carried out and optimized in an end‐to‐end manner by the generative adversarial neural networks. The proposed method applies the cascaded U‐Net architectures to achieve the reconstruction of full‐channel synthetic aperture radar images and the refinement of obtained tomographic results, respectively. The proposed network is trained using simulated data and validate the technique on simulated and real data. The tests show promising results with the limited number of acquisitions while reducing the computation time. [ABSTRACT FROM AUTHOR]

Atmospheric phase error is the main factor affecting the accuracy of ground-based synthetic aperture radar (GB-SAR). The atmospheric phase screen (APS) may be very complicated, so the atmospheric phase correction (APC) model is very important; in particular, the parameters to be estimated in the model are the key to improving the accuracy of APC. However, the conventional APC method first performs phase unwrapping and then removes the APS based on the least-squares method (LSM), and the general phase unwrapping method is prone to introducing unwrapping error. In particular, the LSM is difficult to apply directly due to the phase wrapping of permanent scatterers (PSs). Therefore, a novel methodology for estimating parameters of the APC model based on the maximum likelihood estimation (MLE) and the Gauss-Newton algorithm is proposed in this paper, which first introduces the MLE method to provide a suitable objective function for the parameter estimation of nonlinear far-end and near-end correction models. Then, based on the Gauss-Newton algorithm, the parameters of the objective function are iteratively estimated with suitable initial values, and the Matthews and Davies algorithm is used to optimize the Gauss-Newton algorithm to improve the accuracy of parameter estimation. Finally, the parameter estimation performance is evaluated based on Monte Carlo simulation experiments. The method proposed in this paper experimentally verifies the feasibility and superiority, which avoids phase unwrapping processing unlike the conventional method. [ABSTRACT FROM AUTHOR]

Oil spill SAR images are characterized by high noise, low contrast, and irregular boundaries, which lead to the problems of overfitting and insufficient capturing of detailed features of the oil spill region in the current method when processing oil spill SAR images. An improved DeepLabV3+ model is proposed to address the above problems. First, the original backbone network Xception is replaced by the lightweight MobileNetV2, which significantly improves the generalization ability of the model while drastically reducing the number of model parameters and effectively addresses the overfitting problem. Further, the spatial and channel Squeeze and Excitation module (scSE) is introduced and the joint loss function of Bce + Dice is adopted to enhance the sensitivity of the model to the detailed parts of the oil spill area, which effectively solves the problem of insufficient capture of the detailed features of the oil spill area. The experimental results show that the mIOU and F1-score of the improved model in an oil spill region in the Gulf of Mexico reach 80.26% and 88.66%, respectively. In an oil spill region in the Persian Gulf, the mIOU and F1-score reach 81.34% and 89.62%, respectively, which are better than the metrics of the control model. [ABSTRACT FROM AUTHOR]

Traditional near-field synthetic aperture radar (SAR) imaging algorithms reveal target features by exploiting signal amplitude and phase information. However, electromagnetic wave propagation is constrained by short distance. Therefore, the spherical wave approximation needs to be considered. In addition, it is also limited by equipment ambient noise, azimuth-distance coupling, wave scattering, and transmission power. Both the amplitude and phase of the signal suffer from the interference of multiple clutter, so they cannot be effectively utilized. To address these issues, this paper introduces a covering penetration detection system based on an improved Range Migration Algorithm (IMRMA) imaging method. Firstly, the proposed method minimizes interferences from the front end of the system using an optimized window to balance denoising and information preservation. Next, interval non-uniform interpolation, instead of Stolt interpolation decoupling, is employed to reduce the computational overhead significantly. To minimize the effects due to wave scattering and propagation loss, distance information is enhanced using amplitude and phase compensation. This reduces scattering effects and enhances image quality. An experimental system is constructed based on a vector network analyzer (VNA) to image the target. The proposed method takes about half the time of traditional RMA. The PSNR in the chunky bowl experiment is higher than 14 dB, which is higher than all the compared methods in the paper. The test results show that the designed system and the reported method can effectively achieve high-resolution images by strengthening the target intensity and suppressing the environmental artifacts. [ABSTRACT FROM AUTHOR]

Synthetic aperture radar (SAR) simulation is a vital tool for planning SAR missions, interpreting SAR images, and extracting valuable information. SAR imaging is essential for analyzing sea scenes, and the accuracy of sea surface and scattering models is crucial for effective SAR simulations. Traditional methods typically employ empirical formulas to fit sea surface scattering, which are not closely aligned with the principles of electromagnetic scattering. This paper introduces a novel approach by constructing multiple sea surface models based on the Pierson–Moskowitz (P-M) sea spectrum, integrated with the stereo wave observation projection (SWOP) expansion function to thoroughly account for the influence of wave fluctuation characteristics on radar scattering. Utilizing the shooting and bouncing ray-physical optics (SBR-PO) method, which adheres to the principles of electromagnetic scattering, this study not only analyzes sea surface scattering characteristics under various sea conditions but also facilitates the computation of scattering coupling between multiple targets. By constructing detailed scattering distribution data, the method achieves high-precision SAR simulation results. The scattering model developed using the SBR-PO method provides a more nuanced description of sea surface scenes compared to traditional methods, achieving an optimal balance between efficiency and accuracy, thus significantly enhancing sea surface SAR imaging simulations. [ABSTRACT FROM AUTHOR]

Although advanced deep learning techniques have significantly improved SAR ship detection, accurately detecting small ships remains challenging due to their limited size and the few appearance and geometric clues available. In order to solve this problem, we propose several small object detection strategies. The backbone network uses space-to-depth convolution to replace stride and pooling. It reduces information loss during down-sampling. The neck integrates multiple layers of features globally and injects global and local information into different levels. It avoids the inherent information loss of traditional feature pyramid networks and strengthens the information fusion ability without significantly increasing latency. The proposed intersection-of-union considers the center distance and scale of small ships specifically. It reduces the sensitivity of intersection-of-union to positional deviations of small ships, which is helpful for training toward small ships. During training, the smaller the localization loss of small ships, the greater their localization loss gains are. By this, the supervision of small ships is strengthened in the loss function, which can make the losses more biased toward small ships. A series of experiments are conducted on two commonly used datasets, SSDD and SAR-Ship-Dataset. The experimental results show that the proposed method can detect small ships successfully and thus improve the overall performance of detectors. [ABSTRACT FROM AUTHOR]

Synthetic Aperture Radar (SAR) enables the acquisition of high-resolution imagery even under severe meteorological and illumination conditions. Its utility is evident across a spectrum of applications, particularly in automatic target recognition (ATR). Since SAR samples are often scarce in practical ATR applications, there is an urgent need to develop sample-efficient augmentation techniques to augment the SAR images. However, most of the existing generative approaches require an excessive amount of training samples for effective modeling of the SAR imaging characteristics. Additionally, they show limitations in augmenting the interesting target samples while maintaining image recognizability. In this study, we introduce an innovative single-sample image generation approach tailored to SAR data augmentation. To closely approximate the target distribution across both the spatial layout and local texture, a multi-level Generative Adversarial Network (GAN) architecture is constructed. It comprises three distinct GANs that independently model the structural, semantic, and texture patterns. Furthermore, we introduce multiple constraints including prior-regularized noise sampling and perceptual loss optimization to enhance the fidelity and stability of the generation process. Comparative evaluations against the state-of-the-art generative methods demonstrate the superior performance of the proposed method in terms of generation diversity, recognizability, and stability. In particular, its advantages over the baseline method are up to 0.2 and 0.22 in the SIFID and SSIM, respectively. It also exhibits stronger robustness in the generation of images across varying spatial sizes. [ABSTRACT FROM AUTHOR]

To address the industry's demand for sustainable oilfield development and safe production, it is crucial to enhance the scientific rigor and accuracy of monitoring ground stability and reservoir parameter inversion. For the above purposes, this paper proposes a technical solution that employs two-dimensional time-series ground deformation monitoring based on ascending and descending Interferometric Synthetic Aperture Radar (InSAR) technique first, and the composite dislocation model (CDM) is utilized to achieve high-precision reservoir parameter inversion. To validate the feasibility of this method, the Liaohe Oilfield is selected as a typical study area, and the Sentinel-1 ascending and descending Synthetic Aperture Radar (SAR) images obtained from January 2020 to December 2023 are utilized to acquire the ground deformation in various line of sight (LOS) directions based on Multitemporal Interferometric Synthetic Aperture Radar (MT-InSAR). Subsequently, by integrating the ascending and descending MT-InSAR observations, we solved for two-dimensional ground deformation, deriving a time series of vertical and east-west deformations. Furthermore, reservoir parameter inversion and modeling in the subsidence trough area were conducted using the CDM and nonlinear Bayesian inversion method. The experimental results indicate the presence of uneven subsidence troughs in the Shuguang and Huanxiling oilfields within the study area, with a continuous subsidence trend observed in recent years. Among them, the subsidence of the Shuguang oilfield is more significant and shows prominent characteristics of single-source center subsidence accompanied by centripetal horizontal displacement, the maximum vertical subsidence rate reaches 221 mm/yr, and the maximum eastward and westward deformation is more than 90 mm/yr. Supported by the two-dimensional deformation field, we conducted a comparative analysis between the Mogi, Ellipsoidal, and Okada models in terms of reservoir parameter inversion, model fitting efficacy, and residual distribution. The results confirmed that the CDM offers the best adaptability and highest accuracy in reservoir parameter inversion. The proposed technical methods and experimental results can provide valuable references for scientific planning and production safety assurance in related oilfields. [ABSTRACT FROM AUTHOR]

Synthetic aperture radar (SAR) inter-pulse parameter agility technology involves dynamically adjusting parameters such as the pulse width, chirp rate, carrier frequency, and pulse repetition interval within a certain range; this effectively increases the complexity and uncertainty of radar waveforms, thereby countering active deceptive interference signals from multiple dimensions. With the development of active deceptive interference technology, single-parameter agility can no longer meet the requirements, making multi-parameter joint agility one of the main research directions. However, inter-pulse carrier frequency agility can cause azimuth Doppler chirp rate variation, making azimuth compression difficult and compensation computationally intensive, thus hindering imaging. Additionally, pulse repetition interval (PRI) agility leads to non-uniform azimuth sampling, severely deteriorating image quality. To address these issues, this paper proposes a multi-parameter agile SAR imaging scheme based on traditional frequency domain imaging algorithms. This scheme can handle joint agility of pulse width, chirp rate polarity, carrier frequency, and PRI, with relatively low computational complexity, making it feasible for engineering implementation. By inverting SAR images, the echoes with multi-parameter joint agility are obtained, and active deceptive interference signals are added for processing. The interference-suppressed imaging results verify the effectiveness of the proposed method. Furthermore, simulation results of point targets with multiple parameters under the proposed processing algorithm show that the peak sidelobe ratio (PSLR) and integrated sidelobe ratio (ISLR) are improved by 12 dB and 10 dB, respectively, compared to the traditional fixed waveform scheme. [ABSTRACT FROM AUTHOR]

We study the interrelations between salt karst and landscape evolution at the Ze'elim and Hever alluvial fans, Dead Sea (DS), Israel, in an attempt to characterize the ongoing surface and subsurface processes and identify future trends. Using light detection and ranging, interferometric synthetic aperture radar, drone photography, time-lapse cameras, and direct measurements of floodwater levels, we document floodwater recharge through riverbed sinkholes, subsurface salt dissolution, groundwater flow, and brine discharge at shoreline sinkholes during the years 2011–2023. At the Ze'elim fan, most of the surface floodwater drains into streambed sinkholes and discharges at shoreline sinkholes, whereas at the Hever fan, only a small fraction of the floodwater drains into sinkholes, while the majority flows downstream to the DS. This difference is attributed to the low-gradient stream profiles in Ze'elim, which enable water accumulation and recharge in sinkholes and their surrounding depressions, in contrast with the higher-gradient Hever profiles, which yield high-energy floods capable of carrying coarse gravel that eventually fill the sinkholes. The rapid drainage of floodwater into sinkholes also involves slope failure due to pore-pressure drop and cohesion loss within hours after each drainage event. Surface subsidence lineaments detected by InSAR indicate the presence of subsurface dissolution channels between recharge and discharge sites in the two fans and in the nearby Lynch straits. Subsidence and streambed sinkholes occur in most other fans and streams that flow to the DS; however, with the exception of Ze'elim, all other streams show only minor or no recharge along their course. This is due to either the high-gradient profiles, the gravelly sediments, the limited floods, or the lack of conditions for sinkhole development in the other streambeds. Thus, understanding the factors that govern the flood-related karst formation is of great importance for predicting landscape evolution in the DS region and elsewhere and for sinkhole hazard assessment. [ABSTRACT FROM AUTHOR]

The differences in sensor imaging mechanisms, observation angles, and scattering characteristics of terrestrial objects significantly limit the registration performance of synthetic aperture radar (SAR) and optical heterologous images. Traditional methods particularly struggle in weak feature regions, such as harbors and islands with substantial water coverage, as well as in desolate areas like deserts. This paper introduces a robust heterologous image registration technique based on region-adaptive keypoint selection that integrates image texture features, targeting two pivotal aspects: feature point extraction and matching point screening. Initially, a dual threshold criterion based on block region information entropy and variance products effectively identifies weak feature regions. Subsequently, it constructs feature descriptors to generate similarity maps, combining histogram parameter skewness with non-maximum suppression (NMS) to enhance matching point accuracy. Extensive experiments have been conducted on conventional SAR-optical datasets and typical SAR-optical images with different weak feature regions to assess the method's performance. The findings indicate that this method successfully removes outliers in weak feature regions and completes the registration task of SAR and optical images with weak feature regions. [ABSTRACT FROM AUTHOR]

The utilization of Synthetic Aperture Radar (SAR) for real-time ship detection proves highly advantageous in the supervision and monitoring of maritime activities. Ship detection in the range-compressed domain of SAR rather than in fully focused SAR imagery can significantly reduce the time and computational resources required for complete SAR imaging, enabling lightweight real-time ship detection methods to be implemented on an airborne or spaceborne SAR platform. However, there is a lack of lightweight ship detection methods specifically designed for the SAR range-compressed domain. In this paper, we propose Fast Range-Compressed Detection (FastRCDet), a novel lightweight network for ship detection in the SAR range-compressed domain. Firstly, to address the distinctive geometric characteristics of the SAR range-compressed domain, we propose a Lightweight Adaptive Network (LANet) as the backbone of the network. We introduce Arbitrary Kernel Convolution (AKConv) as a fundamental component, which enables the flexible adjustment of the receptive field shape and better adaptation to the large scale and aspect ratio characteristics of ships in the range-compressed domain. Secondly, to enhance the efficiency and simplicity of the network model further, we propose an innovative Multi-Scale Fusion Head (MSFH) module directly integrated after the backbone, eliminating the need for a neck module. This module effectively integrates features at various scales to more accurately capture detailed information about the target. Thirdly, to further enhance the network's adaptability to ships in the range-compressed domain, we propose a novel Direction IoU (DIoU) loss function that leverages angle cost to control the convergence direction of predicted bounding boxes, thereby improving detection accuracy. Experimental results on a publicly available dataset demonstrate that FastRCDet achieves significant reductions in parameters and computational complexity compared to mainstream networks without compromising detection performance in SAR range-compressed images. FastRCDet achieves a low parameter of 2.49 M and a high detection speed of 38.02 frames per second (FPS), surpassing existing lightweight detection methods in terms of both model size and processing rate. Simultaneously, it attains an average accuracy (AP) of 77.12% in terms of its detection performance. This method provides a baseline in lightweight network design for SAR ship detection in the range-compressed domain and offers practical implications for resource-constrained embedded platforms. [ABSTRACT FROM AUTHOR]

Current synthetic aperture radar (SAR) automatic target recognition (ATR) algorithms primarily operate under the closed-set assumption, implying that all target classes have been previously learned during the training phase. However, in open scenarios, they may encounter target classes absent from the training set, thereby necessitating an open set recognition (OSR) challenge for SAR-ATR. The crux of OSR lies in establishing distinct decision boundaries between known and unknown classes to mitigate confusion among different classes. To address this issue, we introduce a novel framework termed reinforced class separability for SAR target open set recognition (RCS-OSR), which focuses on optimizing prototype distribution and enhancing the discriminability of features. First, to capture discriminative features, a cross-modal causal features enhancement module (CMCFE) is proposed to strengthen the expression of causal regions. Subsequently, regularized intra-class compactness loss (RIC-Loss) and intra-class relationship aware consistency loss (IRC-Loss) are devised to optimize the embedding space. In conjunction with joint supervised training using cross-entropy loss, RCS-OSR can effectively reduce empirical classification risk and open space risk simultaneously. Moreover, a class-aware OSR classifier with adaptive thresholding is designed to leverage the differences between different classes. Consequently, our method can construct distinct decision boundaries between known and unknown classes to simultaneously classify known classes and identify unknown classes in open scenarios. Extensive experiments conducted on the MSTAR dataset demonstrate the effectiveness and superiority of our method in various OSR tasks. [ABSTRACT FROM AUTHOR]

In this study, a novel algorithm to retrieve the current speed along the range direction under extreme sea states is developed from C-band synthetic aperture radar imagery. To this aim, a Sentinel-1 (S-1) dual-polarized synthetic aperture radar (SAR) dataset consisting of 2300 images is collected during 200 tropical cyclones (TCs). The dataset is complemented with collocated wave simulations from the Wavewatch-III (WW3) model and reanalysis currents from the HYbrid Coordinate Ocean Model (HYCOM). The corresponding TC winds are officially released by IFRMER, while the Stokes drift following the wave propagation direction is estimated from the waves simulated by WW3. In this study, first the dependence of wind, Stokes drift, and range current on the Doppler centroid anomaly is investigated, and then the extreme gradient boosting (XGBoost) machine learning model is trained on 87% of the S-1 dataset for range current retrieval purposes. The rest of the dataset is used for testing the retrieval algorithm, showing a root mean square error (RMSE) and a correlation coefficient (r) of 0.11 m/s and 0.97, respectively, with the HYCOM outputs. A validation against measurements collected from two high-frequency (HF) phased-array radars is also performed, resulting in an RMSE and r of 0.12 m/s and 0.75, respectively. Those validation results are better than the 0.22 m/s RMSE and 0.28 r achieved by the empirical CDOP model. Hence, the experimental results confirm the soundness of the XGBoost, exhibiting a certain improvement over the empirical model. [ABSTRACT FROM AUTHOR]

The accurate prediction of soil organic carbon (SOC) is important for agriculture and land management. Methods using remote sensing data are helpful for estimating SOC in bare soils. To overcome the challenge of predicting SOC under vegetation cover, this study extracted spectral, radar, and topographic variables from multi-temporal optical satellite images (high-resolution PlanetScope and medium-resolution Sentinel-2), synthetic aperture radar satellite images (Sentinel-1), and digital elevation model, respectively, to estimate SOC content in arable soils in the Wuling Mountain region of Southwest China. These variables were modeled at four different spatial resolutions (3 m, 20 m, 30 m, and 80 m) using the eXtreme Gradient Boosting algorithm. The results showed that modeling resolution, the combination of multi-source remote sensing data, and temporal phases all influenced SOC prediction performance. The models generally yielded better results at a medium (20 m) modeling resolution than at fine (3 m) and coarse (80 m) resolutions. The combination of PlanetScope, Sentinel-2, and topography factors gave satisfactory predictions for dry land ( R 2 = 0.673, MAE = 0.107%, RMSE = 0.135%). The addition of Sentinel-1 indicators gave the best predictions for paddy field ( R 2 = 0.699, MAE = 0.114%, RMSE = 0.148%). The values of R 2 of the optimal models for paddy field and dry land improved by 36.0% and 33.4%, respectively, compared to that for the entire study area. The optical images in winter played a dominant role in the prediction of SOC for both paddy field and dry land. This study offers valuable insights into effectively modeling soil properties under vegetation cover at various scales using multi-source and multi-temporal remote sensing data. [ABSTRACT FROM AUTHOR]

Convolutional neural networks (CNNs) have significantly advanced in recent years in detecting arbitrary-oriented ships in synthetic aperture radar (SAR) images. However, challenges remain with multi-scale target detection and deployment on satellite-based platforms due to the extensive model parameters and high computational complexity. To address these issues, we propose a lightweight method for arbitrary-oriented ship detection in SAR images, named LSR-Det. Specifically, we introduce a lightweight backbone network based on contour guidance, which reduces the number of parameters while maintaining excellent feature extraction capability. Additionally, a lightweight adaptive feature pyramid network is designed to enhance the fusion capability of the ship features across different layers with a low computational cost by incorporating adaptive ship feature fusion modules between the feature layers. To efficiently utilize the fused features, a lightweight rotating detection head is designed, incorporating the idea of sharing the convolutional parameters, thereby improving the network's ability to detect multi-scale ship targets. The experiments conducted on the SAR ship detection dataset (SSDD) and the rotating ship detection dataset (RSDD-SAR) demonstrate that LSR-Det achieves an average precision (AP50) of 98.5% and 97.2% with 3.21 G floating point operations (FLOPs) and 0.98 M parameters, respectively, outperforming the current popular SAR arbitrary-direction ship target detection methods. [ABSTRACT FROM AUTHOR]

This document is an editorial on the special issue of "3D Reconstruction and Mobile Mapping in Urban Environments Using Remote Sensing." The editorial highlights the importance of 3D reconstruction and mobile mapping in various applications such as autonomous driving, smart logistics, pedestrian navigation, and virtual reality. It discusses the emergence of remote sensing-based techniques and cutting-edge technologies like SfM, SLAM, and deep learning that have enhanced the field. The special issue includes 15 high-quality papers covering topics such as image feature matching, LiDAR/image-fused SLAM, NeRF-based scene rendering, and other applications like InSAR point cloud registration and 3D GPR for underground imaging. The editorial concludes by expressing gratitude to the authors and reviewers for their contributions and highlighting the value of this special issue for further research. [Extracted from the article]

Aboveground biomass (AGB) is a vital indicator for studying carbon sinks in forest ecosystems. Semiarid forests harbor substantial carbon storage but received little attention due to the high spatial–temporal heterogeneity that complicates the modeling of AGB in this environment. This study assessed the performance of different data sources (annual monthly time-series radar was Sentinel-1 [S1]; annual monthly time series optical was Sentinel-2 [S2]; and single-temporal airborne light detection and ranging [LiDAR]) and seven prediction approaches to map AGB in the semiarid forests on the border between Gansu and Qinghai Provinces in China. Five experiments were conducted using different data configurations from synthetic aperture radar backscatter, multispectral reflectance, LiDAR point cloud, and their derivatives (polarimetric combination indices, texture information, vegetation indices, biophysical features, and tree height- and canopy-related indices). The results showed that S2 acquired better prediction (coefficient of determination [R2]: 0.62–0.75; root mean square error [RMSE]: 30.08–38.83 Mg/ha) than S1 (R2: 0.24–0.45; RMSE: 47.36–56.51 Mg/ha). However, their integration further improved the results (R2: 0.65–0.78; RMSE: 28.68–35.92 Mg/ha). The addition of single-temporal LiDAR highlighted its structural importance in semiarid forests. The best mapping accuracy was achieved by XGBoost, with the metrics from the S2 and S1 time series and the LiDAR-based canopy height information being combined (R2: 0.87; RMSE: 21.63 Mg/ha; relative RMSE: 14.45%). Images obtained during the dry season were effective for AGB prediction. Tree-based models generally outperformed other models in semiarid forests. Sequential variable importance analysis indicated that the most important S1 metric to estimate AGB was the polarimetric combination indices sum, and the S2 metrics were associated with red-edge spectral regions. Meanwhile, the most important LiDAR metrics were related to height percentiles. Our methodology advocates for an economical, extensive, and precise AGB retrieval tailored for semiarid forests. [ABSTRACT FROM AUTHOR]

The speckle noise inherent in synthetic aperture radar (SAR) imaging has long posed a challenge for SAR data processing, significantly affecting image interpretation and recognition. Recently, deep learning-based SAR speckle removal algorithms have shown promising results. However, most existing algorithms rely on convolutional neural networks (CNN), which may struggle to effectively capture global image information and lead to texture loss. Besides, due to the different characteristics of optical images and synthetic aperture radar (SAR) images, the results of training with simulated SAR data may bring instability to the real-world SAR data denoising. To address these limitations, we propose an innovative approach that integrates swin transformer blocks into the prediction noise network of the denoising diffusion probabilistic model (DDPM). By harnessing DDPM's robust generative capabilities and the Swin Transformer's proficiency in extracting global features, our approach aims to suppress speckle while preserving image details and enhancing authenticity. Additionally, we employ a post-processing strategy known as pixel-shuffle down-sampling (PD) refinement to mitigate the adverse effects of training data and the training process, which rely on spatially uncorrelated noise, thereby improving its adaptability to real-world SAR image despeckling scenarios. We conducted experiments using both simulated SAR image datasets and real SAR image datasets, evaluating our algorithm from subjective and objective perspectives. The visual results demonstrate significant improvements in noise suppression and image detail restoration. The objective results demonstrate that our method obtains state-of-the-art performance, which outperforms the second-best method by an average peak signal-to-noise ratio (PSNR) of 0.93 dB and Structural Similarity Index (SSIM) of 0.03, affirming the effectiveness of our approach. [ABSTRACT FROM AUTHOR]

Automatic classification of buildings within port areas from synthetic aperture radar (SAR) images is crucial for effective port monitoring and planning. Yet, the unique challenges of SAR imaging, such as side-looking geometry, multi-bouncing scattering, and the compact arrangement of structures, often lead to incomplete building structures and blurred boundaries in classification results. To address these issues, this paper introduces SPformer, an efficient and lightweight pyramid transformer model tailored for semantic segmentation. The SPformer utilizes a pyramid transformer encoder with spatially separable self-attention (SSSA) to refine both local and global spatial information and to process multi-scale features, enhancing the accuracy of building structure delineation. It also integrates a lightweight all multi-layer perceptron (ALL-MLP) decoder to consolidate multi-scale information across various depths and attention scopes, refining detail processing. Experimental results on the Gaofen-3 (GF-3) 1 m port building classification dataset demonstrate the effectiveness of SPformer, achieving competitive performance compared to state-of-the-art models, with mean intersection over union (mIoU) and mean F1-score (mF1) reaching 77.14% and 87.04%, respectively, while maintaining a compact model size and lower computational requirements. Experiments conducted on the entire scene of SAR images covering port area also show the good capabilities of the proposed method. [ABSTRACT FROM AUTHOR]

This study evaluates the capability of an unconstrained tomographic algorithm to capture 3D water vapor density variability throughout 2017 in Houston, U.S. The algorithm relies solely on Global Navigation Satellite System (GNSS) observations and does not require an initial guess or other specific constraints regarding water vapor density variability within the tomographic domain. The test domain, featuring 9 km horizontal, 500 m vertical, and 30 min temporal resolutions, yielded remarkable results when compared to data retrieved from the ECMWF Reanalysis v5 (ERA5), regional Weather Research and Forecasting Model (WRF) data, and GNSS-Radio Occultation (RO). For the first time, a time series of Precipitable Water Vapor maps derived from the Interferometric Synthetic Aperture Radar (InSAR) technique was used to validate the spatially integrated water vapor computed by GNSS tomography. Tomographic results clearly indicate the passage of Hurricane Harvey, with integrated water vapor peaking at 60 kg/m2 and increased humidity at altitudes up to 7.5 km. Our findings suggest that GNSS tomography holds promise as a reliable source of atmospheric water vapor data for various applications. Future enhancements may arise from denser and multi-constellation networks. [ABSTRACT FROM AUTHOR]

The early and accurate mapping of winter canola is essential in predicting crop yield, assessing agricultural disasters, and responding to food price fluctuations. Although some methods have been proposed to map the winter canola at the flowering or later stages, mapping winter canola planting areas at the early stage is still challenging, due to the insufficient understanding of the multi-source remote sensing features sensitive for winter canola mapping. The objective of this study was to evaluate the potential of using the combination of optical and synthetic aperture radar (SAR) data for mapping winter canola at the early stage. We assessed the contributions of spectral features, backscatter coefficients, and textural features, derived from Sentinel-2 and Sentinel-1 SAR images, for mapping winter canola at early stages. Random forest (RF) and support vector machine (SVM) classification models were built to map winter canola based on early-stage images and field samples in 2017 and then the best model was applied to corresponding satellite data in 2018–2022. The following results were obtained: (1) The red edge and near-infrared-related spectral features were most important for the mapping of early-stage winter canola, followed by VV (vertical transmission, vertical reception), DVI (Difference vegetation index), and GOSAVI (Green Optimized Soil Adjusted Vegetation Index); (2) based on Sentinel-1 and Sentinel-2 data, winter canola could be mapped as early as 130 days prior to ripening (i.e., early overwinter stage), with the F-score over 0.85 and the OA (Overall Accuracy) over 81%; (3) adding Sentinel-1 could improve the OA by about 2–4% and the F-score by about 1–2%; and (4) based on the classifier transfer approach, the F-scores of winter canola mapping in 2018–2022 varied between 0.75 and 0.97, and the OAs ranged from 79% to 86%. This study demonstrates the potential of early-stage winter canola mapping using the combination of Sentinel-2 and Sentinel-1 images, which could enable the large-scale early mapping of canola and provide valuable information for stakeholders and decision makers. [ABSTRACT FROM AUTHOR]

The SAR system possesses the ability to carry out all-day and all-weather imaging, which is highly valuable in the application of aircraft identification. However, aircraft identification from SAR images still faces great challenges due to speckle noise interference, multiscale problems, and complex background interference. To solve these problems, an efficient bidirectional path multiscale fusion and attention network (EBMA-Net) is proposed in this paper. It employs bidirectional connectivity to fuse the features of aircraft with different scales to perform the accurate detection of aircraft even when the background is highly complex. In the presented EBMA-Net, a module called efficient multiscale channel attention fusion (EMCA) and three parallel squeeze efficient channel attention (SECA) modules are proposed. In the EMCA module, the bidirectional paths are created by stacking upper and lower fusion modules, which effectively integrate shallow detailed features and deep semantic information. So, the detection performance of aircraft at different scales is improved. In the SECA module, the dependency relationship between feature channels is explicitly modeled, which can automatically learn the importance of different channels, prioritize key features, so as to improve the precision and robustness of aircraft identification. In the experiment, the public dataset of aircraft identification (i.e., SAR-AIRcraft-1.0, which is generated from the GF-3 satellite) from high-resolution SAR systems is used, and several other excellent target-detection networks are used for performance comparison, namely, YOLOv5s, YOLOv7, MGCAN, and EBPA2N. According to the results, the average aircraft detection accuracy of EBMA-Net is 91.31%, which is 4.5% higher than YOLOv7; and the false alarm rate is decreased by 5%. Its accuracy in the identification of aircraft can reach 95.6%, which is about 3.7% higher than YOLOv7. Therefore, the EBMA-Net obviously outperforms the other networks for aircraft detection and identification. The proposed EBMA-Net, which can capture the detailed information and better restrain the background interference, could also be used to perform the detection and identification of dense targets with different scales and background from SAR images. [ABSTRACT FROM AUTHOR]

Reservoir impoundment imposes a significant triggering effect on bank landslides. Studying the early identification of landslides and their stability concerning reservoir water levels and rainfall is vital for guaranteeing the safety of residents and infrastructure in reservoir regions. This study proposed a method for establishing a dynamic inventory of active landslides at large hydropower stations using integrated remote sensing techniques, demonstrated at Lianghekou Reservoir. We employed interferometric stacking synthetic aperture radar (stacking-InSAR) technology, small baseline subset interferometric synthetic aperture radar (SBAS-InSAR) technology, and optical satellite images to identify and catalogue active landslides. Moreover, we conducted field investigations to examine the deformation characteristics of landslides. Finally, Pearson's correlation analysis was employed to evaluate the response between deformation values, reservoir water levels, and rainfall. The results revealed 75 active landslides, including 12 long-term active landslides before impoundment and 63 new landslides after impoundment, which were primarily concentrated in the Waduo and Yazho–Zatou regions. The correlation coefficient between landslide deformation values and the reservoir level was high (0.93), while the correlation coefficient with rainfall was low (0.57). The results of this research offer a crucial foundation for preventing and mitigating landslides in reservoir areas. [ABSTRACT FROM AUTHOR]

India, as the world's second-largest rice producer, accounting for 21.7% of global rice production, plays a crucial role in ensuring global food supply stability. However, creating high-resolution rice maps for India, such as those at 10 to 30 m, poses significant challenges due to frequent cloudy weather conditions and the complexities of its agricultural systems. This study used a sample-independent mapping method for rice in India using the synthetic aperture radar (SAR)-based Rice Index (SPRI). We produced 10 m spatial resolution rice distribution maps for three years (i.e., 2018, 2020, and 2022) for 23 states in India, covering 98% of Indian rice production. The method effectively utilized the unique characteristics of rice in the vertical–horizontal (VH) backscatter coefficient time series of Sentinel-1, from ttransplantation to the maturity stage, combined with cloud-free Sentinel-2 imagery. By calculating the SPRI values for each agricultural field object using adaptive parameters, the planting locations of rice were accurately identified. On average, the user, producer, and overall accuracy over all investigated states and union territories was 84.72%, 82.31%, and 84.40%, respectively. Additionally, the regional-scale validation based on the statistical area at the district level showed that the coefficient of determination (R2) ranged from 0.53 to 0.95 for each state, indicating that the spatial distribution of the statistical planted area at the district level was reproduced well. [ABSTRACT FROM AUTHOR]

This paper analyzes the advantages and the drawbacks of using the Synthetic Aperture Radar (SAR) azimuth multichannel technique known as Multi-Aperture Processing Scheme (MAPS), in a set of relevant application cases that are far from the canonical ones. In the scientific literature on this topic, equally distributed azimuth channels with the quasi-monostatic deployment are assumed. With this research, we aim at extending the models from the current literature to (i) a generic bistatic acquisition geometry, (ii) a set of cases where the number of receiving tiles is not the same for each channel, or (iii) the tiles are shared between adjacent channels thus creating an overlapping configuration. The paper introduces the mathematical models for the listed non-conventional MAPS cases. Dealing with the bistatic MAPS, we first solve the problem by interpreting multichannel acquisition as a bank of Linear Time Invariant (LTI) filters. Then, a more physical approach, based on discrimination of the direction of arrivals (DoAs) is pursued. The effectiveness of the two methods and the advantages of the second approach on the first are proved by using a simplified 1D end-to-end simulation. Even limiting to the monostatic configuration, the azimuth antenna tiles have always been supposed equally partitioned among the RX channels. Overcoming this limit has two advantages: (i) more MAPS possible solutions in case few azimuth tiles are available, as in the ROSE-L mission; (ii) the number of channels can be designed independently of the number of tiles, also allowing asymmetric solutions, useful for a phase array antenna with an odd number of tiles such as in the SAOCOM-1 mission. Conversely, sharing one or more receiving tiles in different receiving channels makes the input noise partially correlated. The drawback is an increase in the noise level. A trade-off is determined for the different solutions obtained using simulations with real mission parameters. The theoretical performance and the end-to-end simulations are compared. [ABSTRACT FROM AUTHOR]

Understanding and monitoring soil organic carbon (SOC) stocks is crucial for ecosystem carbon cycling, services, and addressing global environmental challenges. This study employs the BERTopic model and bibliometric trend analysis exploration to comprehensively analyze global SOC estimates. BERTopic, a topic modeling technique based on BERT (bidirectional encoder representatives from transformers), integrates recent advances in natural language processing. The research analyzed 1761 papers on SOC and remote sensing (RS), in addition to 490 related papers on machine learning (ML) techniques. BERTopic modeling identified nine research themes for SOC estimation using RS, emphasizing spectral prediction models, carbon cycle dynamics, and agricultural impacts on SOC. In contrast, for the literature on RS and ML it identified five thematic clusters: spatial forestry analysis, hyperspectral soil analysis, agricultural deep learning, the multitemporal imaging of farmland SOC, and RS platforms (Sentinel-2 and synthetic aperture radar, SAR). From 1991 to 2023, research on SOC estimation using RS and ML has evolved from basic mapping to topics like carbon sequestration and modeling with Sentinel-2A and big data. In summary, this study traces the historical growth and thematic evolution of SOC research, identifying synergies between RS and ML and focusing on SOC estimation with advanced ML techniques. These findings are critical to global ecosystem SOC assessments and environmental policy formulation. [ABSTRACT FROM AUTHOR]

The effective monitoring of railway facilities is crucial for safety and operational efficiency. This study proposes an enhanced remote monitoring technique for railway facilities, specifically bridges, using satellite radar InSAR (Interferometric Synthetic Aperture Radar) technology. Previous studies faced limitations such as insufficient data points and challenges with topographical and structural variations. Our approach addresses these issues by analysing displacements from 30 images captured by the X-band SAR satellite, TerraSAR-X, over two years. We tested each InSAR parameter to develop an optimal set of parameters, applying the technique to a post-tensioned PSC (pre-stressed concrete) box bridge. Our findings revealed a recurring arch-shaped elevation along the bridge, attributed to temporal changes and long-term deformation. Further analysis showed a strong correlation between this deformation pattern and average surrounding temperature. This indicates that our technique can effectively identify micro-displacements due to temperature changes and structural deformation. Thus, the technique provides a theoretical foundation for improved SAR monitoring of large-scale social overhead capital (SOC) facilities, ensuring efficient maintenance and management. [ABSTRACT FROM AUTHOR]

Sea ice is a crucial component of the global climate system. The China–French Ocean Satellite Scatterometer (CFOSAT/SCAT, CSCAT) employs an innovative rotating fan beam system. This study applied principal component analysis (PCA) to extract classification features and developed an ensemble machine learning approach for sea ice detection. PCA identified key features from CSCAT's backscatter information, representing outer and sweet swath observations. The ensemble model's performances (OA and Kappa) for the Northern and Southern Hemispheres were 0.930, 0.899, and 0.844, 0.747, respectively. CSCAT achieved an accuracy of over 0.9 for close ice and open water but less than 0.3 for open ice, with misclassification of open ice as closed ice. The sea ice extent discrepancy between CSCAT and the National Snow and Ice Data Center (NSIDC) was −0.06 ± 0.36 million km2 in the Northern Hemisphere and −0.03 ± 0.48 million km2 in the Southern Hemisphere. CSCAT's sea ice closely matched synthetic aperture radar (SAR) imagery, indicating effective sea ice and open water differentiation. CSCAT accurately distinguished sea ice from open water but struggled with open ice classification, with misclassifications in the Arctic's Greenland Sea and Hudson Bay, and the Antarctic's sea ice–water boundary. [ABSTRACT FROM AUTHOR]

Establishing a quantitative relationship between Synthetic Aperture Radar (SAR) data and optical data can facilitate the fusion of these two data sources, enhancing the time-series monitoring capabilities for remote sensing of a land surface. In this study, we analyzed the Normalized Difference Vegetation Index (NDVI) and Shortwave Infrared Transformed Reflectance (STR) with the backscatter coefficients in vertical polarization VV (σ0VV) and cross polarization VH (σ0VH) across different seasons. We used optical and microwave satellite data spanning from the southern Gobi Desert region to the steppe region in northern Mongolia. The results indicate a relatively high correlation between the NDVI derived from Sentinel-2 and σ0VH (RVH = 0.29, RVH = 0.44, p < 0.001) and a low correlation between the NDVI and σ0VV (RVH = 0.06, RVH = 0.14, p < 0.01) in the Gobi Desert region during summer and fall. STR showed a positive correlation with both σ0VH and σ0VV except in spring, with the highest correlation coefficients observed in summer (RVV = 0.45, RVV = 0.44, p < 0.001). In the steppe region, significant seasonal variations in the NDVI and σ0VH were noted, with a strong positive correlation peaking in summer (RVH = 0.71, p < 0.001) and an inverse correlation with σ0VV except in summer (RVV = −0.43, RVV = −0.34, RVV = −0.13, p < 0.001). Additionally, STR showed a positive correlation with σ0VH and σ0VV in summer (RVH = 0.40, RVV = 0.39, p < 0.001) and fall (RVH = 0.38, RVV = 0.09, p < 0.01), as well as an inverse correlation in spring (RVH= −0.17, RVV= −0.38, p < 0.001) and winter (RVH = −0.21, RVV = −0.06, p < 0.001). The correlations between the NDVI, STR, σ0VH, and σ0VV were shown to vary by season and region. In the Gobi Desert region, perennial shrubs are not photosynthetic in spring and winter, and they affect backscatter due to surface roughness. In the steppe region, annual shrubs were found to be the dominant species and were found to photosynthesize in spring, but not enough to affect the backscatter due to surface roughness. [ABSTRACT FROM AUTHOR]

Synthetic aperture radar (SAR) automatic target recognition (ATR) technology has seen significant advancements. Despite these advancements, the majority of research still operates under the closed-set assumption, wherein all test samples belong to classes seen during the training phase. In real-world applications, however, it is common to encounter targets not previously seen during training, posing a significant challenge to the existing methods. Ideally, an ATR system should not only accurately identify known target classes but also effectively reject those belonging to unknown classes, giving rise to the concept of open set recognition (OSR). To address this challenge, we propose a novel approach that leverages the unique capabilities of the Capsule Network and the Kullback-Leibler divergence (KLD) to distinguish unknown classes. This method begins by deeply mining the features of SAR targets using the Capsule Network and enhancing the separability between different features through a specially designed loss function. Subsequently, the KLD of features between a testing sample and the center of each known class is calculated. If the testing sample exhibits a significantly larger KLD compared to all known classes, it is classified as an unknown target. The experimental results of the SAR-ACD dataset demonstrate that our method can maintain a correct identification rate of over 95% for known classes while effectively recognizing unknown classes. Compared to existing techniques, our method exhibits significant improvements. [ABSTRACT FROM AUTHOR]

Many exceptional deep learning networks have demonstrated remarkable proficiency in general object detection tasks. However, the challenge of detecting ships in synthetic aperture radar (SAR) imagery increases due to the complex and various nature of these scenes. Moreover, sophisticated large-scale models necessitate substantial computational resources and hardware expenses. To address these issues, a new framework is proposed called a stepwise attention-guided multiscale feature fusion network (SAFN). Specifically, we introduce a stepwise attention mechanism designed to selectively emphasize relevant information and filter out irrelevant details of objects in a step-by-step manner. Firstly, a novel LGA-FasterNet is proposed, which incorporates a lightweight backbone FasterNet with lightweight global attention (LGA) to realize expressive feature extraction while reducing the model's parameters. To effectively mitigate the impact of scale and complex background variations, a deformable attention bidirectional fusion network (DA-BFNet) is proposed, which introduces a novel deformable location attention (DLA) block and a novel deformable recognition attention (DRA) block, strategically integrating through bidirectional connections to achieve enhanced features fusion. Finally, we have substantiated the robustness of the new framework through extensive testing on the publicly accessible SAR datasets, HRSID and SSDD. The experimental outcomes demonstrate the competitive performance of our approach, showing a significant enhancement in ship detection accuracy compared to some state-of-the-art methods. [ABSTRACT FROM AUTHOR]

Earth observation missions such as Sentinel and Landsat support the large-scale identification of agricultural crops by providing free radar and multispectral satellite images. The extraction of representative image information as well as the combination of different image sources for improved feature selection still represent a major challenge in the field of remote sensing. In this paper, we propose a novel three-dimensional (3D) deep learning U-Net model to fuse multi-level image features from multispectral and synthetic aperture radar (SAR) time series data for seasonal crop-type mapping at a regional scale. For this purpose, we used a dual-stream U-Net with a 3D squeeze-and-excitation fusion module applied at multiple stages in the network to progressively extract and combine multispectral and SAR image features. Additionally, we introduced a distinctive method for generating patch-based multitemporal multispectral composites by selective image sampling within a 14-day window, prioritizing those with minimal cloud cover. The classification results showed that the proposed network provided the best overall accuracy (94.5%) compared to conventional two-dimensional (2D) and three-dimensional U-Net models (2D: 92.6% and 3D: 94.2%). Our network successfully learned multi-modal dependencies between the multispectral and SAR satellite images, leading to improved field mapping of spectrally similar and heterogeneous classes while mitigating the limitations imposed by persistent cloud coverage. Additionally, the feature representations extracted by the proposed network demonstrated their transferability to a new cropping season, providing a reliable mapping of spatio-temporal crop type patterns. [ABSTRACT FROM AUTHOR]

In this paper, ground deformation measurements from synthetic aperture radar interferometry (InSAR) and ground-based prism monitoring are compared to finite-element (FE) simulation results for a recent tailings dam collapse. The InSAR monitoring demonstrated the complex spatial and temporal variability of the tailings dam deformation that is not captured in traditional, point-based monitoring approaches. Potentially anomalous deformation behaviour could have been detected from InSAR 1 year preceding the dam failure. A two-dimensional coupled-consolidation analysis was used to predict the dam behaviour during construction stages. The FE modelling results were in broad agreement with the deformation measurement sources, both in terms of magnitude and trends preceding failure. The results, however, deviate significantly immediately before failure, following the construction of the buttresses. Moreover, the FE modelling is sensitive to parameter uncertainties, such as spatial variability of foundation soil properties. The FE results revealed that deformation in both the upstream and downstream parts of the dam are sensitive to changing foundation properties. However, this impact is potentially much more significant on the downstream compared to the upstream parts of the dam, which are dominated by the behaviour of the tailings. This study highlights the efficacy and complementarity of geotechnical and remote sensing techniques for the monitoring of tailings dams. [ABSTRACT FROM AUTHOR]