Search

We report the enhanced p-type conduction properties in BiCuOSe by doping of monovalent ions (K+). As compared with undoped BiCuOSe, simultaneous increase in both the carrier concentration and the Hall mobility was achieved in the K-doped BiCuOSe. The origin of the enhancement was discussed in terms of the two-band structure in the valence band of the BiCuOSe, and the density of state effective masses of the heavy (∼1.1 me) and light hole (∼0.18 me) were estimated by using Pisarenko relation. [ABSTRACT FROM AUTHOR]

Migration experiments with polystyrene were performed in two-sided contact with n -heptane and distilled water as the food simulants at temperatures of 10, 24 and 40, and 40, 60 and 90°C, respectively. The surface/volume ratios in the migration cell were set at 8.04 and 10.05?dm 2 ?l -1 for n -heptane and distilled water, respectively. Styrene monomer, styrene dimers and styrene trimers migrating to the food simulants were determined by GC-FID analysis. Heptane fully extracted the styrene monomer and the oligomers from the polystyrene sheet, whereas in the distilled water only the migrated styrene trimers could be detected. To determine the apparent diffusion coefficient, the migration process was analysed based on Fick's law. The higher the molecular weight of the oligomers, the more significant the reduction in the diffusion coefficient. Higher molecular weight oligomers also had lower activation energy of diffusion when the temperature dependence of diffusivity was analysed by the Arrhenius equation. The diffusion coefficient of the trimers was much higher for heptane contact than for water. The activation energy of the diffusion of trimers for water contact was higher than that for heptane. [ABSTRACT FROM AUTHOR]

The migration of five surrogate contaminants, anthracene, benzophenone, dimethyl phthalate, methyl stearate and pentachlorophenol, from paper and paperboard into water through a polyethylene (PE) coating layer was investigated. Virgin paper and paperboard coated with PE films of 0.012 and 0.030mm thickness were spiked evenly with standard 1-ml solutions containing 5mg of each surrogate. The spiked papers were placed in contact with the PE coating layer at 10 and 24 °C for 21 days. The resulting surrogate migration through the PE layer into 100ml water was measured by an analytical method developed here that used gas chromatography equipped with a flame ionization detector. Non-polar surrogates of anthracene and methyl stearate did not show any significant migration. In the case of the thin layer coating of 0.012mm, polar water-soluble contaminants of benzophenone, dimethyl phthalate and pentachlorophenol showed an equilibrated or maximized migration after 1 day, even at a refrigerated temperature of 10 °C. A thick PE coating of 0.030mm thickness delayed the progress of contaminant migration, which was also slower at lower temperature. Our results indicate that polyethylene coatings should not be seen as a complete barrier against possible contaminants in paper packaging materials under chilled or ambient conditions. Several variables such as coating thickness, temperature and suspected contaminants need to be considered to control the possible contamination risk from recycled or printed paper. [ABSTRACT FROM AUTHOR]