Search

Interleukin (IL)-17A plays a role in the development of atherosclerotic plaques; however, the mechanism remains unclear. In this study, apolipoprotein E-deficient (ApoE–/–) mice were fed a high-fat diet to induce atherosclerosis, followed by the treatment with exogenous recombinant IL-17A or the neutralizing antibody to confirm the impact of IL-17A on the established atherosclerotic plaques. We found that both the stimulation of IL-17A and blockage of endogenous IL-17 via antibody did not affect the size of the established plaques. However, IL-17A significantly increased the vulnerability of plaques characterized by the accumulation of lipids and T cells with a concurrent decrease in the number of smooth muscle cells. In addition, the blockage by IL-17 neutralizing antibody attenuated plaque vulnerability. Furthermore, we found that although IL-17A did not affect the efferocytosis of macrophages to apoptotic cells, it promoted the apoptosis of macrophages in the presence of oxidized low-density lipoprotein in vitro. Also, IL-17A upregulated chemokines MCP-1 and CXCL-10 expression in the plaques. Our data indicated that IL-17A controlled both SMC and macrophage accumulation and the apoptosis within the plaque, which may further weaken the aorta wall. This study suggests that IL-17A may be a potential therapeutic target for cardiovascular diseases.

Dielectric elastomers (DEs), have attracted interest because they can replicate the behavior of muscles. They can change shape when subjected to an electric field. A novel DE is proposed in this study that incorporates silicon carbide (SiC) nanowires into silicone rubber (SR). The nanowires were propagated using polycarbosilane via a chemical vapor reaction (CVR). A boronate polymer was employed to promote compatibility between SR and SiC nanowires which modified the nanowire surfaces, leveraging a strong adhesive quality of the catechol moiety. Electrohydrodynamic (EHD) inkjet printing was then used to form the DEs into various shapes. These DEs had substantial dielectric constants of the order of 4.46. Significantly, one of the DEs achieved the highest actuated area strain of 20.36% in an electric field of 16.5 V/μm, demonstrating excellent driving performance. Furthermore, when used the fabricated DEs showed pronounced long‐term stability, meaning they are capable of finding applications in artificial intelligence, biomimetics, aerospace, and other disciplines. Highlights: The SiC nanowires were obtained through a chemical vapor reaction.A boronate polymer with catechol moiety was used to modify the SiC nanowires.DEs were formed various shapes by inkjet printing.DEs achieved very large actuated strains of up to 20.36% at 16.5 V/μm. [ABSTRACT FROM AUTHOR]

Engineering systems have become increasingly complex, which demands the study of system-level maintenance strategy to be integrated with a realistic prediction of component-level performance. Most previous research of system maintenance models has focused only on the relationship between component failure rate and maintenance cost. For a system with degrading components, however, it is more intuitive to model the system's health state together with component degradation processes. In this paper we propose a preventive maintenance strategy based on the simulation of component degradation processes and lifetime predictions. In addition, the proposed strategy utilizes the maintenance opportunities between tasks assigned by system. Specifically, the unit-time system maintenance cost is minimized with the consideration of interactions between component-level and system-level decision-makings. The approach we propose is more practical due to the simulation of the component degradation processes according to the real task profile of the system and the initial maintenance schedule can be re-adjusted in the event of an unexpected component failure. Therefore, it ensures an overall low maintenance cost and high system reliability over time. A case study of unmanned aerial vehicle illustrates the proposed method. [ABSTRACT FROM AUTHOR]

An ultrasensitive and broad-specific monoclonal antibody recognising cyproheptadine hydrochloride and six phenothiazines was produced. The 50% inhibition concentration against cyproheptadine hydrochloride was 0.036 ng/mL, and the cross-reactivities for six phenothiazines were from 6.33% to 63.16%. Based on the developed monoclonal antibody, an immunochromatographic strip was established, with the visual detection limits (cut-off values) of seven drugs ranging from 5 to 100 ng/g in feedstuffs. With the strip reader, the 50% inhibition concentration of the developed immunochromatographic strip for seven drugs ranged from 0.570 to 7.750 ng/g. The intra-assay recoveries were from 79.8% to 103.4% with the highest coefficient of variation of 11.3%. The inter-assay recoveries were from 79.0% to 96.6% with the highest coefficient of variation of 12.7%. In summary, the proposed immunochromatographic strip was considered suitable for simultaneously monitoring cyproheptadine hydrochloride and phenothiazines in feedstuffs. [ABSTRACT FROM AUTHOR]

Long-term child-parent relationship quality following hospitalization for pediatric traumatic brain injury (TBI) remains poorly understood. We tested whether current child-parent conflict and closeness were related to the children's history of TBI-related experiences and contemporary child/family characteristics. The sample included 202 Chinese children (Boys: 60.4%) with a history of hospitalization for TBI. On average, the children were 11.2 years old (SD = 1.59) and sustained TBI at 8.5 years old (SD = 1.6). TBI-related data were obtained from hospital medical records. Parents provided data on child-parent closeness, child-parent conflict, and parental efficacy 2–4 years (M = 2.7, SD = 0.7) after discharge. Forty-nine children (24.3%) had mild TBI, 139 (68.8%) had moderate TBI, and 14 (6.9%) had severe TBI. Surgical intervention occurred among 128 (63.4%) of the 202 children. Contemporaneous child and family characteristics explained 19% of the variance, history of surgery, length of hospitalization, and recovery status explained another 7%, and the interaction between length of hospitalization and parental efficacy explained another 4% in child-parent conflict. Contemporaneous child and family characteristics explained 29% of the variance, and TBI-related variables explained another 2% in child-parent closeness. Post-TBI child-parent relationship was more associated with child/family characteristics than with TBI variables. Practitioners and families should be aware of the long-term challenges to child-parent relationship following hospitalization for pediatric TBI. [ABSTRACT FROM AUTHOR]

Background: Continuous comprehensive treatment is still needed after endoscopic sinus surgery (ESS) for chronic rhinosinusitis (CRS) to promote the recovery of sinus mucosal morphology and function. Traditional Chinese medicine (TCM) nasal irrigation is a promising external treatment of TCM, but at present, the application of TCM nasal irrigation after ESS for CRS has not been recommended by the guidelines. Therefore, this article aims to develop a systematic overview and meta-analysis protocol to assess the effectiveness and safety of Chinese herbal nasal rinse for CRS recovery after ESS. Methods: Seven databases shall be retrieved from their inception until December 2021. Eligible randomized controlled trials will be covered in the study. The outcome indicators of the survey will consist of efficacy, visual analogue scale score, Lund-Kennedy score for nasal endoscopy, Lund-Mackay score for sinus computed tomography and other secondary outcome indicators. The selection of literature, extraction of data, and methodological quality evaluation of literature shall be conducted by two researchers separately. If there is any dispute, it can be discussed and solved by a third researcher. Review Manager 5.3 software will be applied to data analysis. Results: The article will make a detailed research programme to explore the efficacy and safety of TCM nasal irrigation on CRS recovery after ESS. Conclusion: This protocol is suitable for evaluating the effectiveness and safety of TCM nasal rinse for CRS recovery after ESS, and can provide corresponding evidence-based medical evidence. Systematic review registration: Open Science Framework Registration DOI: 10.17605/OSF.IO/ZV73Q. [ABSTRACT FROM AUTHOR]

Classical swine fever (CSF) is caused by classical swine fever virus (CSFV) and has led to huge economic losses in the pig industry worldwide. Although vaccination and other control measures have been carried out, it is essential to establish a rapid and valid method for CSF vaccination monitoring and clinical diagnosis. The CSFV E2 protein has been widely used as a major antigen for antibody detection. It is important to improve the affinity between the E2 protein and CSFV antibodies to improve the performance of the detection method. In this study, a recombinant E2 extracellular protein (amino acids 1–331) with a native homodimer conformation and high affinity for the anti‐CSFV‐E2 monoclonal antibody WH303 was expressed using a Bac‐to‐Bac baculovirus expression system. A novel immunochromatographic test strip based on the recombinant CSFV E2 protein was developed for CSFV antibody detection. The sensitivity of this strip for detecting CSFV standard‐positive serum was 1:102400, four times higher than that of the previously developed CnC2 test strip. No cross‐reactivity with antibodies of other swine viruses was observed. Detection of clinical swine serum samples (n = 813) demonstrated that the agreements of this E2 test strip with three commercial ELISA kits were 97.17% (790/813), 95.94% (780/813) and 93.73% (762/813), respectively. Our data indicate that a novel E2 test strip with enhanced sensitivity has been developed and can be applied for clinical sample detection, providing a new, powerful and simple approach for CSFV antibody monitoring. [ABSTRACT FROM AUTHOR]

Electrospun nanofibrous scaffolds have gained extensive attention in the fields of soft tissue engineering and regenerative medicine. In this study, a series of biodegradable nanofibrous meshes were fabricated by electrospinning poly(ε-caprolactone) (PCL) and poly(p -dioxanone) (PPDO) blends with various mass ratios. All the as-developed PCL/PPDO nanofibrous meshes possessed smooth and highly aligned fiber morphology. The mean fiber diameter was 521.5 ± 76.6 nm for PCL meshes and 485.8 ± 88.9 nm for PPDO meshes, and the mean fiber diameter seemed to present a decreasing tendency with the increasing of the PPDO component. For pure PCL meshes, the contact angle was about 117.5 ± 1.6°, the weight loss ratio was roughly 0.2% after 10 weeks of degradation, and the tensile strength was 41.2 ± 2.3 MPa in the longitudinal direction and 4.2 ± 0.1 MPa in the transverse direction. It was found that the surface hydrophilicity and in vitro degradation properties of PCL/PPDO meshes apparently increased, but the mechanical properties of PCL/PPDO meshes obviously decreased when more PPDO component was introduced. The biological tests showed that 4:1 PCL/PPDO nanofibrous meshes and 1:1 PCL/PPDO nanofibrous meshes could obviously promote the adhesion and proliferation of human adipose derived mesenchymal stem cells more than pure PCL and PPDO meshes and 1:4 PCL/PPDO meshes. The results demonstrated that it is feasible to adjust the surface hydrophilicity, degradation profile, and mechanical properties as well as biological properties of as-obtained nanofibrous meshes by blending PCL and PPDO components. This study provides meaningful reference and guidance for the design and development of PCL/PPDO hybrid nanofibrous scaffolds for soft tissue engineering research and application. [ABSTRACT FROM AUTHOR]

Metal oxide nanoparticles have been widely utilized for the fabrication of functional gas sensors to determine various flammable, explosive, toxic, and harmful gases due to their advantages of low cost, fast response, and high sensitivity. However, metal oxide-based gas sensors reveal the shortcomings of high operating temperature, high power requirement, and low selectivity, which limited their rapid development in the fabrication of high-performance gas sensors. The combination of metal oxides with two-dimensional (2D) nanomaterials to construct a heterostructure can hybridize the advantages of each other and overcome their respective shortcomings, thereby improving the sensing performance of the fabricated gas sensors. In this review, we present recent advances in the fabrication of metal oxide-, 2D nanomaterials-, as well as 2D material/metal oxide composite-based gas sensors with highly sensitive and selective functions. To achieve this aim, we firstly introduce the working principles of various gas sensors, and then discuss the factors that could affect the sensitivity of gas sensors. After that, a lot of cases on the fabrication of gas sensors by using metal oxides, 2D materials, and 2D material/metal oxide composites are demonstrated. Finally, we summarize the current development and discuss potential research directions in this promising topic. We believe in this work is helpful for the readers in multidiscipline research fields like materials science, nanotechnology, chemical engineering, environmental science, and other related aspects. [ABSTRACT FROM AUTHOR]

We report a new competitive lateral flow immunoassay (LFIA) for hapten detection, which uses antibodies to bind antigens from a sample and form a coloured immune complex due to artificial antigens conjugated with gold nanoparticles; these were intercepted with SPA. Here, 2,4-dichlorophenoxyacetic acid (2,4-D) and gentamicin (GM) were selected as model analytes. The visual limit of detection of the 2,4-D strip was 25 ng/mL in tap water; the GM strip was 3.13 ng/mL in milk. This approach exhibits more than a 40-fold lower detection limit for 2,4-D and 3.2-fold lower for GM, which is compared to traditional LFIA using the same reagents. This approach can accurately control the amount of antibody, protect the activity of antibody and enhance the detection signal, thus improving the sensitivity of the LFIA and providing more and more sensitive methods for the development of LFIAs. This study developed a new method of LFIA that could improve the sensitivity of LFIA without adding any reagent. The antibodies are unlabelled; thus, the immunological properties of the antibodies are not destroyed by antibody folding during the labelling process. Sufficient gold-labelled antigens ensure that each antibody bound to the test line can combine two gold nanoparticles, thereby amplifying the overall signal. [ABSTRACT FROM AUTHOR]

Clonidine hydrochloride (CLO) is a new substitute for a traditionally used adrenergic agonist. The illegal use of CLO in the livestock industry possess potential harm to human health. Hence, it is an urgent need for the rapid detection of CLO residues. Here, we prepared a highly sensitive and specific monoclonal antibody (mAb) and it used to develop an indirect competitive ELISA (ic-ELISA) for the rapid screening of CLO residues. The limit of detection and limit of quantification values of ic-ELISA were as follows: 0.033 and 0.054 ng/mL for pig urine and 0.061 and 0.096 ng/mL for pork, respectively. Recovery experiment indicated that the ic-ELISA posed outstanding accuracy and precision. Furthermore, the results of ic-ELISA were strongly correlated to the results of HPLC. Thus, the ic-ELISA provided a sensitive and rapid on-site detection of CLO residues in pig urine and pork samples. [ABSTRACT FROM AUTHOR]

Imidocarb (IM) is an antiprotozoal agent, which is mainly used to treat babesiosis and piroplasmosis for animals. However, overdose or improbable utilization cause IM residues in animal origin products, which would be harmful to human health. Here, a monoclonal antibody (mAb) against IM with extremely sensitive and specific features has been successfully prepared from a novel immunogen synthesized by virtue of the active ester method. The concentration of half‐maximal inhibition (IC50) of the mAb was 0.074 ng/ml and the affinity constant was 4.58 × 1010 L/mol. On the basis of this condition, an immunochromatographic strip (ICS) is proposed that could be applied in milk samples to test IM rapidly. For the ICS, the visual detection limit (cut‐off value) was 5 ng/ml, IC50 was 0.4 ng/ml, the limit of detection (LOD) was 0.078 ng/ml, the linear detection scope was 0.117 to 1.37 ng/ml. The recovery rates ranged from 88.83% to 91.47% and coefficients of variation (CV) were in the spectrum of 7.31% to 9.43%. In general, the recommended test strip provided an exceedingly simple and reliable detection method for quickly testing the IM. Practical Application: In our joint efforts, an extremely sensitive monoclonal antibody against imidocarb was obtained and a test strip for the rapid detection of imidocarb in milk was developed. The developed method could be applied to the field and provided great potential for analytical of imidocarb in other matrixes. [ABSTRACT FROM AUTHOR]

Bio‐based materials with multifunctional performance are getting immense attention nowadays for their environment friendly and renewable character. Inspired by toughening effect of graphene nanosheets and borate chemistry, a simple in‐situ borate crosslinking in water and freeze‐drying method was employed to fabricate a fire retarded bio‐based aerogel. The structure of the material was evaluated and analysis by SEM, XRD, FTIR, Raman and XPS. Importantly, the bio‐based aerogel has improved strength and adsorption properties due to unique structure. The compressive strength of rGO(reduced graphene oxide) + CMC (carboxymethyl cellulose) aerogel could reach 128 ± 2.1 kPa which is five times that of neat CMC aerogel. The bio‐based aerogel can load more than 2500 times of self‐weight. The adsorption capacity for organic solvents and oil of rGO+CMC aerogel is also greatly improved by a little rGO (1%) introducing due to its unique porous structure and hydrophobic nature of rGO. Additionally, rGO+CMC aerogel is also found fire resistant with relatively low thermal conductivity due to the borate and GO introduction. [ABSTRACT FROM AUTHOR]

The outbreak and worldwide pandemic of the novel severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) have a significant impact on global economy and human health. In order to reduce the disease spread, 16 monoclonal antibodies (McAbs) again SARS-CoV-2 were generated by immunized mice with the spike protein receptor binding domain (RBD), which was expressed in Chinese hamster ovary cell (CHO). A colloidal gold-based immunochromatographic strip was developed with two McAbs to detect SARS-CoV-2 spike protein, which can play a potential role in monitoring vaccine quality. The strip is highly specific, detecting only SARS-CoV-2 spike protein, and does not show any non-specific reactions with syndrome coronavirus (SARS-CoV), Middle East respiratory syndrome coronavirus (MERS-CoV) and other coronavirus and influenza viruses. The strip detected subunit vaccine in our laboratory with a detection limit of spike protein of 62.5 ng/mL. This strip provides an effective method in monitoring vaccine quality by detecting the antigen content of spike protein. [ABSTRACT FROM AUTHOR]