Search

This correspondence presents new rate-1 space--time block codes (STBCs) attending full diversity over every quadrature amplitude modulation (QAM) constellation when the number of Tx antennas is a power of two. From the simulation results, our design performs very closely to the quasi-orthogonal code with constellation rotation over 4-QAM and 16-QAM in the case of four Tx antennas over quasi-static Rayleigh fading channels. Moreover, the proposed codes would not cause any constellation expansion over QAM symbols in contrast with the quasi-orthogonal codes with constellation rotations. Index Terms--Algebraic codes, generalized quaternion groups, representations of finite groups, space--time block codes (STBCs), transmit diversity.

This paper concerns some design issues and tradeoffs of communication systems equipped with multiple transmit and receive antennas. The general space-time coding/modulation structure by Tarokh et al. (1999) is considered. Several design issues are investigated for this structure. The layered space-time architecture by Foschini (1996) is revisited as a special case of the general structure. It is also used to demonstrate the design and complexity tradeoffs of the system. Through intuitive and analytical explanations, as well as simulations, the design considerations for these space-time transmission structures and their contributions to the performance are shown.

Spatial–temporal (ST) subspace-based channel estimation techniques formulated with $\ell 2$ minimum mean square error (MMSE) criterion alleviate the multi-access interference (MAI) problem when the interested signals exhibit low-rank property. However, the conventional $\ell 2$ ST subspace-based methods suffer from mean squared error (MSE) deterioration in unknown interference channels, due to the difficulty to separate the interested signals from the channel covariance matrices (CCMs) contaminated with unknown interference. As a solution to the problem, we propose a new $\ell 1$ regularized ST channel estimation algorithm by applying the expectation-maximization (EM) algorithm to iteratively examine the signal subspace and the corresponding sparse-supports. The new algorithm updates the CCM independently of the slot-dependent $\ell 1$ regularization, which enables it to correctly perform the sparse-independent component analysis (ICA) with a reasonable complexity order. Simulation results shown in this paper verify that the proposed technique significantly improves MSE performance in unknown interference MIMO channels, and hence, solves the BER floor problems from which the conventional receivers suffer. [ABSTRACT FROM AUTHOR]

For rate optimization in interference limited networks, improper Gaussian signaling has shown its ability to outperform conventional proper Gaussian signaling. In this paper, we study a weighted sum-rate maximization problem with improper Gaussian signaling for the multiple-input multiple-output interference broadcast channel. To solve this nonconvex and NP-hard problem, we propose an effective separate covariance and pseudo-covariance matrices optimization algorithm. In the covariance optimization, a weighted minimum mean square error algorithm is adopted, and in the pseudo-covariance optimization, an alternating optimization (AO) algorithm is proposed, which guarantees convergence to a stationary solution and ensures a sum-rate improvement over proper Gaussian signaling. An alternating direction method of multipliers-based multi-agent distributed algorithm is proposed to solve an AO subproblem with the globally optimal solution in a parallel and scalable fashion. The proposed scheme exhibits favorable convergence, optimality, and complexity properties for future large-scale networks. The simulation results demonstrate the superior sum-rate performance of the proposed algorithm as compared with the existing schemes with proper as well as improper Gaussian signaling under various network configurations. [ABSTRACT FROM AUTHOR]

Inter-block-interference (IBI) caused in the pursuit of spectral efficiency can deteriorate channel estimation performance. For this problem, previously-proposed chained turbo estimation performs IBI cancelation by using the soft replica of the transmitted signal. The IBI cancelation technique can, however, suffer from a mean squared error (MSE) floor problem, since the soft replica is unavailable at the first turbo iteration. The IBI problem can be avoided by using channel impulse response length constraint. Nevertheless, as shown in this paper, the IBI avoidance approach is difficult to perform independently since it requires unbiased second-order statistics. This paper proposes, therefore, a new conditional $\ell 1$ regularized minimum mean square error channel estimation algorithm by jointly utilizing the IBI avoidance/cancelation and subspace techniques. Simulation results verify that the proposed algorithm solves the MSE floor problem, and, hence, improves the bit error rate convergence performance in realistic IBI channels including the effect of pulse shaping filters. [ABSTRACT FROM AUTHOR]

Turbo channel estimation algorithms can improve estimation accuracy in multiuser (MU) multi-input multi-output (MIMO) systems. However, the conventional least squares (LS) turbo channel estimation technique based on the maximum likelihood approach is difficult to be performed in large MU-MIMO systems since it requires a cubic complexity order $\mathcal {O}(\kappa ^3 N_T^3 N_R^3)$ for a system constant $\kappa$ and numbers of $N_T$ -transmit and $N_R$ -receive antennas. This is because the conventional technique computes inversion of a covariance matrix whose size is proportional to $\kappa N_T N_R$. We propose a new low-complexity LS estimation technique that requires a complexity order $\mathcal {O}(\kappa ^3 N_T^3)$ only by utilizing algebraic property on the covariance matrix. Simulation results shown in this letter verify that the proposed technique significantly reduces processing time without sacrificing the estimation performance. [ABSTRACT FROM AUTHOR]

This paper considers noisy Wyner–Ziv coding (WZC), in which a remote noisy source is compressed with side information at the decoder only. The decoder side information is not limited to being Gaussian, thus this noisy WZC problem cannot be transformed into the conventional one tailored for noiseless sources. A new coding structure, named the residual-quantization (RQ) based noisy WZC, is proposed to solve the problem. This scheme explicitly constructs the theoretical auxiliary random variable to facilitate optimal reconstruction of the noisy source. In this two-stage encoder, the noisy source is quantized twice and the quantization error (residue) of the first stage is the input of the second stage. By sending only the quantization index of the second stage to the decoder, the corresponding code rate can theoretically approach the noisy WZC bound. Moreover, the RQ-based noisy WZC is implemented using graph-based codes. The main challenge is that it is necessary to design a codebook that is simultaneously good for source and channel coding for the first stage quantization, since this quantization code also acts as a channel code at the decoder. This problem is solved by constructing a low-density parity check (LDPC) code with edge degrees optimized for channel coding, and enhancing its performance for source coding by using a modified reinforced belief-propagation quantization algorithm. Simulation results show that the noisy Wyner-Ziv bounds can be practically approached by our implementation. In addition, the proposed implementation offers more flexibility in the code rates compared with the existing practical designs, making it more suitable for emerging applications such as fronthaul compression. [ABSTRACT FROM AUTHOR]

The computational complexity and peak-to-average power ratio (PAPR) of conventional precoded orthogonal frequency division multiplexing (OFDM) systems can be reduced using a T-OFDM precoded system based on the Walsh–Hadamard matrix. The present paper proposes a novel precoding scheme for further reducing the computational complexity and PAPR of T-OFDM. In the proposed scheme, the precoding matrix is combined with an inverse discrete Fourier transform to construct a new transform matrix at the transmitter. Notably, the transform matrix is both unitary and circulant, with each column being a perfect Gaussian integer sequence containing just four non-zero elements of \\pm 1,\pm j\. A low-complexity receiver is additionally constructed for the proposed precoding scheme. A closed-form expression is derived for the bit error rate (BER) in T-OFDM and the proposed precoding scheme under frequency-selective fading channels. The simulation results for the BER are shown to be in good agreement with the mathematical derivations. In addition, it is demonstrated that T-OFDM and the proposed scheme have an equivalent BER performance when their precoding matrices are designed in such a way as to obtain full frequency diversity. However, the proposed scheme has a better PAPR performance and a lower computational complexity than T-OFDM. [ABSTRACT FROM PUBLISHER]

This paper considers the multiantenna multiple-access relay channel (MARC), in which multiple users transmit messages to a common destination with the assistance of a relay. In a variety of MARC settings, the dynamic decode-and-forward (DDF) protocol is very useful due to its outstanding rate performance. However, the lack of good structured codebooks so far hinders practical applications of DDF for MARC. In this work, two classes of structured MARC codes are proposed: 1) one-to-one relay-mapper-aided multiuser lattice coding (O-MLC); and 2) modulo-sum relay-mapper-aided multiuser lattice coding (MS-MLC). The former enjoys better rate performance, whereas the latter provides more flexibility to tradeoff between the complexity of the relay mapper and the rate performance. It is shown that, in order to approach the rate performance achievable by an unstructured codebook with maximum-likelihood decoding, it is crucial to use a new $K$-stage coset decoder for structured O-MLC instead of the one-stage decoder proposed in previous works. However, if O-MLC is decoded with the one-stage decoder only, it can still achieve the optimal DDF diversity-multiplexing gain tradeoff in the high signal-to-noise ratio regime. As for MS-MLC, its rate performance can approach that of the O-MLC by increasing the complexity of the modulo-sum relay-mapper. Finally, for practical implementations of both O-MLC and MS-MLC, practical short-length lattice codes with linear mappers are designed, which facilitate efficient lattice decoding. Simulation results show that the proposed coding schemes outperform existing schemes in terms of outage probabilities in a variety of channel settings, especially when the users-to-relay links are better than the other channel links. [ABSTRACT FROM PUBLISHER]

In this paper, system design for a multiple-input–multiple-output (MIMO) relay broadcast channel with individual signal-to-interference-plus-noise ratio (SINR) constraints at mobile stations (MSs) is considered. By exploring the structure of downlink–uplink duality at either the base station (BS) or the relay station (RS), we propose two schemes of joint power allocation and beamforming design at the BS and the RS. The problem of the existence of feasible solutions under practical power constraints at the BS and the RS with given SINR targets is considered first. Then, the problem of sum power minimization is considered. Each design problem can be efficiently solved using optimal joint power allocation and beamforming under the framework of convex optimization. We also show that with subchannel pairing at the RS, the transmission power can be further reduced. Finally, a generalization to the multihop scenario is provided to further improve power efficiency. [ABSTRACT FROM PUBLISHER]

For the multiuser multiple-input multiple-output downlink channel, users feedback their channel state information to help base station schedule users and improve system sum rate. This incurs a large aggregate feedback bandwidth which grows linearly with the number of users. In this paper, we propose a novel scheme to reduce feedback load in a scheduled downlink orthogonal beamforming system by allowing users to opportunistically determine the number of feedback bits to use according to multiple decision thresholds. Through theoretical analysis, we show that, while keeping the aggregate feedback load of the entire system constant regardless of the number of users, the proposed scheme almost achieves the optimal asymptotic sum rate scaling with respect to the number of users (i.e., the multiuser diversity). Specifically, given the number of thresholds, the proposed scheme can achieve a constant portion of the optimal sum rate achievable by the system in which all the users always feedback, and the remaining portion (i.e., the sum rate loss) decreases exponentially to zero as the number of thresholds increases. We further consider feedback design by minimizing the number of thresholds and allocating quantization bits. Simulation shows that the proposed scheme can reduce feedback load and utilize limited feedback bandwidth more effectively than the existing feedback methods. [ABSTRACT FROM PUBLISHER]

In this paper we consider the secure transmission with multiple-input, single-output, single-antenna eavesdropper (MISOSE) in fast fading channels where the transmitter knows perfect legitimate channel state information but only the statistics of the eavesdropper's channel. For the MISOSE channels, the artificial noise assisted beamforming proposed by Goel and Negi is a promising technique, where the artificial noise is imposed on the null space of the legitimate channel to disrupt the eavesdropper's reception. Here we propose a generalized artificial noise scheme which allows the injection of the artificial noise to the legitimate channel. Although the generalized artificial noise may cause the leakage of artificial noise at the legitimate receiver, the secrecy rate can still be improved since the covariance matrix of it is more flexible than the heuristic one selected by Goel and Negi. To fully characterize the proposed scheme, we investigate the optimization of its secrecy rate. We first derive the conditions under which the beamformers of the message bearing signal and the generalized artificial noise being the same is optimal. Based on this choice, the complicated secrecy rate optimization problem over the covariance matrices of the message-bearing signal and the generalized artificial noise can be reduced to a much simpler power allocation problem. We also develop an efficient algorithm to solve this non-convex power allocation problem. Numerical results show that our generalized artificial noise scheme outperforms Goel and Negi's heuristic selection, especially in the near eavesdropper settings. In particular, with the aid of the proposed scheme, the regime with non-zero secrecy rate is enlarged, which can significantly improve the connectivity of the network. [ABSTRACT FROM AUTHOR]

In this paper, we analytically study a random access network that uses the request-to-send and clear-to-send (RTS/CTS) handshake for reservation of transmission time. In the network, nodes initiate data transmission to a common base station (BS) by sending an RTS packet according to a transmission probability. The RTS packet of a node specifies the length of the node's requested data transmission interval, and will be successfully received by the BS if its signal to interference plus noise ratio (SINR) is higher than the capture ratio. The BS will then reply with a CTS packet to grant this node the requested data transmission interval and inform the other nodes not to interrupt. The transmission probabilities of RTS packets of all nodes will determine the average throughput and power consumption of each node. The set of all possible throughputs that can be achieved by the network is called the throughput region. We characterize the throughput region and provide an upper bound on the total transmission power consumption over the throughput region at the optimal operating point. Specifically, the upper bound corresponds to one of three points in the throughput region depending on the fraction of time occupied by the RTS packets. [ABSTRACT FROM PUBLISHER]