Search

Fraudulent practices concerning honey are growing fast and involve misrepresentation of origin and adulteration. Simple and feasible methods for honey authentication are needed to ascertain honey compliance and quality. Working on a robust dataset and simultaneously investigating honey traceability and adulterant detection, this study proposed a portable FTNIR fingerprinting approach combined with chemometrics. Multifloral and unifloral honey samples (n = 244) from Spain and Sardinia (Italy) were discriminated by botanical and geographical origin. Qualitative and quantitative methods were developed using linear discriminant analysis (LDA) and partial least squares (PLS) regression to detect adulterated honey with two syrups, consisting of glucose, fructose, and maltose. Botanical and geographical origins were predicted with 90% and 95% accuracy, respectively. LDA models discriminated pure and adulterated honey samples with an accuracy of over 92%, whereas PLS allows for the accurate quantification of over 10% of adulterants in unifloral and 20% in multifloral honey. [ABSTRACT FROM AUTHOR]

Conducting polymers are used in a wide range of applications, especially in the design and development of electrochemical sensors. Their main advantage, in this context, is their ability to efficiently modify an electrode surface using the direct polymerization of a suitable monomer in an electrochemical cell, or by physical coating. Additionally, the conducting polymers can be mixed with further materials (metal nanoparticles, carbonaceous materials) to enhance conductivity and analytical features (linear range, limit of detection, sensitivity, and selectivity). Due to their characteristics, conducting polymer-based amperometric sensors are applied to the determination of different organic and inorganic analytes. A view of recent advances in this field focusing on pyrrole, thiophene, and 3,4-ethylenedioxythiophene as starting materials is reported. [ABSTRACT FROM AUTHOR]

Sardinia, located in Italy, is a significant producer of Protected Designation of Origin (PDO) sheep cheeses. In response to the growing demand for high-quality, safe, and traceable food products, the elemental fingerprints of Pecorino Romano PDO and Pecorino Sardo PDO were determined on 200 samples of cheese using validated, inductively coupled plasma methods. The aim of this study was to collect data for food authentication studies, evaluate nutritional and safety aspects, and verify the influence of cheesemaking technology and seasonality on elemental fingerprints. According to European regulations, one 100 g serving of both cheeses provides over 30% of the recommended dietary allowance for calcium, sodium, zinc, selenium, and phosphorus, and over 15% of the recommended dietary intake for copper and magnesium. Toxic elements, such as Cd, As, Hg, and Pb, were frequently not quantified or measured at concentrations of toxicological interest. Linear discriminant analysis was used to discriminate between the two types of pecorino cheese with an accuracy of over 95%. The cheese-making process affects the elemental fingerprint, which can be used for authentication purposes. Seasonal variations in several elements have been observed and discussed. [ABSTRACT FROM AUTHOR]

Discrimination of honey based on geographical origin is a common fraudulent practice and is one of the most investigated topics in honey authentication. This research aims to discriminate honeys according to their geographical origin by combining elemental fingerprinting with machine-learning techniques. In particular, the main objective of this study is to distinguish the origin of unifloral and multifloral honeys produced in neighboring regions, such as Sardinia (Italy) and Spain. The elemental compositions of 247 honeys were determined using Inductively Coupled Plasma Mass Spectrometry (ICP-MS). The origins of honey were differentiated using Principal Component Analysis (PCA), Linear Discriminant Analysis (LDA), and Random Forest (RF). Compared to LDA, RF demonstrated greater stability and better classification performance. The best classification was based on geographical origin, achieving 90% accuracy using Na, Mg, Mn, Sr, Zn, Ce, Nd, Eu, and Tb as predictors. [ABSTRACT FROM AUTHOR]

Free fluoride ions are effective in combating caries in children, and their supplementation in milk has been widely used worldwide for this purpose. Furthermore, it is known that ionic fluoride added to milk is distributed among its components, but little is known about their quantitative relationships. This is likely due to the absence of an analytical protocol aimed at differentiating and quantifying the most important forms of fluorine present in milk. For the first time, a comprehensive protocol made up of six potentiometric methods devoted to quantifying the most important fractions of fluorine in milk (i.e., the free inorganic fluoride, the inorganic bonded fluorine, the caseins-bonded fluorine, the whey-bonded fluorine, the lipid-bonded fluorine, and the total fluorine) has been developed and tested on real samples. Four of the six methods of the procedure are original, and all have been validated in terms of limit of detection and quantification, precision, and trueness. The data obtained show that 9% of all fluorine was in ionic form, while 66.3% of total fluorine was bound to proteins and lipids, therefore unavailable for human absorption. Beyond applications in dental research, this protocol could be extended also to other foods, or used in environmental monitoring. [ABSTRACT FROM AUTHOR]

Featured Application: Redox and optical features of thiophene-based oligomers and polymers make them appealing in several technological fields, including light-emitting diodes, solar cells, electrochromic and electroluminescent devices. In this context, the evaluation of the energy gap can give useful suggestions on the effect of substituents on the behavior of the oligothiophenes chain, and on the extension of the electron density delocalization. Oligothiophenes are especially appealing due to their promising applications in different fields, including photosensitive devices. In this context, anchoring a selected substituent on the main structure of the starting material can induce changes in redox and spectroscopic features, according to the nature of the substituent and its position on central or terminal rings. Here, an electrochemical and spectroscopic comparison between 2,2′:5′,2″-terthiophene (2), 5-Br-terthiophene (3) and 5-ethynyl-terthiophene (5-ET) is reported, aimed at elucidating the effect of the nature of the substituent on the energy gap value of the terthiophene skeleton. Furthermore, in order to understand the influence of a selected substituent in varying its position on the terthiophene backbone, 5-ET is compared to the previously described 3′-ethynyl-terthiophene (3′-ET). Experimental results are confirmed by DFT calculations, showing a higher extension of the electron density in 5-ET compared to 2 and 3, as well as to 3′-ET. In addition, as a consequence of the presence of the unsaturated fragment on the C-5-position, the energy gap value of poly-5-ET (the electrogenerated film from 5-ET) appears significantly lower than poly-2 and poly-3. Finally, the higher conjugation effect of a terminal acetylene fragment compared to a central one is confirmed by the energy gap values of poly-5-ET and poly-3′-ET. [ABSTRACT FROM AUTHOR]

The availability of fast and non-expensive analytical methods for the determination of widespread interest analytes such as glucose is an object of large relevance; this is so not only in the field of analytical chemistry, but also in medicinal and in food chemistry. In this context, electrochemical biosensors have been proposed in different arrangements, according to the mode of electron transfer between the bioreceptor and the electrode. An efficient immobilization of an enzyme on the electrode surface is essential to assure satisfactory analytical performances of the biosensor in terms of sensitivity, limit of detection, selectivity, and linear range of employment. Here, we report the use of a thiophene monomer, (2,5-di(2-thienyl)thieno [3,2-b]thiophene (dTT-bT), as a precursor of an electrogenerated conducting film to immobilize the glucose oxidase (GOx) enzyme on Pt, glassy carbon (GC), and Au electrode surfaces. In addition, the polymer film electrochemically synthetized on a glassy carbon electrode was modified with graphene oxide before the deposition of GOx; the analytical performances of both the arrangements (without and with graphene oxide) in the glucose detection were compared. The biosensor containing graphene oxide showed satisfactory values of linear dynamic range (1.0–10 mM), limit of detection (0.036 mM), and sensitivity (9.4 µA mM−1 cm−2). Finally, it was tested in the determination of glucose in fruit juices; the interference from fructose, saccharose, and ascorbic acid was evaluated. [ABSTRACT FROM AUTHOR]

Despite unifloral honeys from Sardinia, Italy, being appreciated worldwide for their peculiar organoleptic features, their elemental signature has only partly been investigated. Hence, the principal aim of this study was to measure the concentration of trace and toxic elements (i.e., Ag, As, Ba, Be, Bi, Cd, Co, Cr, Cu, Fe, Hg, Li, Mn, Mo, Ni, Pb, Sb, Sn, Sr, Te, Tl, V, and Zn) in four unifloral honeys produced in Sardinia. For this purpose, an original ICP-MS method was developed, fully validated, and applied on unifloral honeys from asphodel, eucalyptus, strawberry tree, and thistle. Particular attention was paid to the method's development: factorial design was applied for the optimization of the acid microwave digestion, whereas the instrumental parameters were tuned to minimize the polyatomic interferences. Most of the analytes' concentration ranged between the relevant LoDs and few mg kg−1, while toxic elements were present in negligible amounts. The elemental signatures of asphodel and thistle honeys were measured for the first time, whereas those of eucalyptus and strawberry tree honeys suggested a geographical differentiation if compared with the literature. Chemometric analysis allowed for the botanical discrimination of honeys through their elemental signature, whereas linear discriminant analysis provided an accuracy level of 87.1%. [ABSTRACT FROM AUTHOR]

Featured Application: Ru(terpy)-based conducting polymers can be used as modifying agents in enzyme-based am-perometric biosensors to significantly enhance selectivity and sensitivity thanks to the effi-cient electron-transfer process promoted by the simultaneous presence of the organic con-ducting framework and the metal center. A heteroleptic [Ru(terpy)2]2+ (terpy = 2,2′:6′,2″-terpyridine) complex was electrochemically polymerized to give the corresponding metal-containing conducting polymer on gold and glassy carbon electrodes. The polymerization of the Ru(II) complex was allowed by a terthiophene functionalization on one of the two terpy coordinating fragments, whereas the presence of -COOH substituents on the second terpy ligand enabled the film to immobilize a tyrosinase enzyme by cross-linking with glutaraldehyde. Then, the Ru(terpy) conducting polymer worked as a transducer as well as an immobilizing agent in the design of amperometric biosensors for the determination of epinephrine. The electrochemical behavior of enzymatic sensors containing Ru(terpy)-based conducting polymers was investigated by differential pulse voltammetry and chronoamperometry. Analytical performances and kinetic parameters were calculated, suggesting a potential application of the reported biosensors in the determination of epinephrine in pharmaceutical products. [ABSTRACT FROM AUTHOR]

Highlights • We propose a new GC-FID method measuring traces of lactose and galactose in cheese. • The validated method was tested on a wide sampling of PDO Pecorino Romano cheese. • The concentration of both analytes were always below the relevant LOD's. • PDO Pecorino Romano sheep cheese is a "lactose free" foodstuff. • Such cheese is also useful in the dietary management of patients with galactosaemia. Abstract In this work, we present and validate new gas-chromatographic with flame injection detector method to measure traces of lactose and galactose in cheese. Analytes are first extracted from the matrix by repeated treatments with a 40% (v/v) methanol/water solution, followed by their silanization with a 2:1 mixture of trimethylsilylimidazole and trimethylchlorosilane. Validation parameters show excellent limits of detection and quantification, and very good precision and trueness. The method was tested with a wide sampling of Protected Designation of Origin (PDO) Pecorino Romano sheep cheese (33 samples, different for geographic area of production, seasonality and ripening levels). For all of them, the concentration of lactose and galactose were always below the relevant limits of detection (i.e. 0.54 and 0.90 mg kg−1, respectively). On this basis, PDO Pecorino Romano sheep cheese is, according to both European Community and European Food Safety Authority guidelines, a "lactose free" foodstuff, useful in the dietary management of patients with galactosaemia and of people who are lactose intolerant. [ABSTRACT FROM AUTHOR]

Traditional Filuferru is an ancient spirit from Sardinia, Italy, which is usually obtained from the distillation of wine or grape marc. In this contribution, the results of the first chemical characterization of a wide number of crafts Filuferru samples has been accomplished in terms of an evaluation of the alcoholic strength, qualitative and quantitative gas-chromatography-mass spectrometry (GC-MS) analysis of the volatile composition of the distillate, and its trace element composition by means an inductively coupled plasma-mass spectrometry (ICP-MS) method. Both instrumental methods have been validated and applied on 21 craft samples of Filuferru, whereas one sample of commercial distillate has been analyzed for comparison purposes. Alcoholic strength ranged between 41.0 and 62.4% (v/v). Sixty volatile compounds were identified and ten of them have been quantified. Analogies and differences with Grappa (i.e., the Italian distilled spirit closer to Filuferru) have been highlighted in the qualitative and quantitative profile of this matrix. Often meaningful amounts of acetaldehyde, ethyl acetate, dietyl acetal, and acetic acid were measured. Elemental analysis, performed on toxic, non-toxic elements, and oligoelements, 18 in total, revealed a wide variability of concentrations in both analytes and samples. High concentrations of Cu are sometimes evidenced, which are likely caused by losses from the distillation apparatus. The principal components analysis (PCA) allowed the differentiation of the ten volatile compounds quantified in two groups: the former, as described mainly by PC1, constituted by acetic acid, ethyl acetate, dietyl acetal, and acetaldehyde, and the second, described by PC2, constituted by 1-propanol, 2-methyl-1-propanol, the two coeluiting isomers 2-methyl-1-butanol and 3-methyl-1-butanol,1-hexanol, 2-phenylethanol, and 2,3-butanediol. Data obtained may be useful in order to establish a regulation for the production of high-quality traditional Filuferru from Sardinia. [ABSTRACT FROM AUTHOR]

The present work was aimed to define and validate farmstead production of lactose- free Pecorino di Osilo cheese, fresh ricotta cheese, and salted and smoked ricotta cheese (Ricotta mustia). The enzymatic activity of the commercial preparation containing lactase (1.1 g/mL), preliminarily tested using a spectrophotometric titration, showed activity equal to 4950±40 neutral lactase unit/g. The amount of lactase required to obtain the lactose-free milk was then established in triplicate laboratory trials, by adding the enzyme at concentrations of 0.7, 0.9 and 1.1 g/L in flasks containing 160 mL of raw sheep's milk. Samples were incubated under conditions expected during milk storage and cheese-making. The residual lactose content in milk was determined by enzymatic method. The addition of lactase at concentration of 1.1 g/L of milk reduced the lactose concentration below the limit of detection (LOD) of 0.06 g/L. The procedure was validated at a dairy farm, using three different batches of bulk raw sheep's lactose-free milk that were transformed into Pecorino di Osilo cheese. The resulting whey was used to produce fresh ricotta and Ricotta mustia cheese. Raw milk and whey samples were always below lactose detection limit. The residual lactose was measured in Pecorino di Osilo cheese, after 24 hours and 30 days from production; in fresh ricotta cheese, after 48 hours; in Ricotta mustia cheese after 7 days. The determination of lactose content in cheese samples was conducted by a gas chromatography- flame ionization detection method, which showed a LOD and limit of quantification respectively of 1.8 and 5.6 mg/kg for cheese, and 1.35 and 4.2 mg/kg for both ricotta cheeses. The lactose concentration was always below the relevant LOD values in all samples. The mean concentration of galactose and glucose were respectively 13,000±2000 and 11,000±2000 mg/kg in fresh Pecorino di Osilo, 1100±300 and 1200±300 mg/kg in fresh ricotta, and 950±400 and 750±250 mg/kg in Ricotta mustia. The results of the present study showed that the production of farmstead lactose-free Pecorino di Osilo cheese and ricotta cheeses from raw sheep's milk is easily achievable. The main issue for farmstead production of artisanal lactose-free products is the implementation of permanent procedures based on hazard-analysis and critical control principles aimed at guaranteeing the effectiveness of the process and at acquiring analytical evidences to demonstrate the fulfilment of law requirements for labelling. [ABSTRACT FROM AUTHOR]

Honey is a natural product known to modulate several biological activities including cancer. The aim of the present study was to examine the phytochemical content and the antioxidant activity of Strawberry tree (Arbutus unedo) honey (STH) and its cytotoxic properties against human colon adenocarcinoma (HCT-116) and metastatic (LoVo) cell lines in comparison with Manuka (Leptospermum scoparium) honey (MH). Several unifloral STH and MH were analyzed for their phenolic, flavonoid, amino acid and protein contents, as well as their radical scavenging activities. STH from the Berchidda area showed the highest amount of phenolic, flavonoid, amino acid and protein content, and antioxidant capacity compared to MH. Both STH and MH induced cytotoxicity and cell death in a dose- and time-dependent manner in HCT-116 and LoVo cells, with less toxicity on non-cancer cells. Compared to MH, STH showed more effect at lower concentrations on HCT-116 and LoVo cells. In addition, both honeys increased intracellular reactive oxygen species (ROS) generation. In HCT-116 cells, STH and MH induced similar ROS production but in LoVo cells STH induced a higher percentage of ROS compared to MH. Our results indicate that STH and MH can induce cell growth inhibition and ROS generation in colon adenocarcinoma and metastatic cells, which could be due to the presence of phytochemicals with antioxidant properties. These preliminary results are interesting and suggest a potential chemopreventive action which could be useful for further studies in order to develop chemopreventive agents for colon cancer. [ABSTRACT FROM AUTHOR]

Saccharides are functional constituents of milk. Although d-lactose represents almost the totality of the saccharides in the milk, minor species, like d-glucose, d-galactose, myo-inositol and, as a result of severe thermal treatments, monosaccharides like d-tagatose, are also detectable. Although chromatography has been the main analytical approach used for accomplishing this task, quite surprisingly a validated gas chromatographic method aimed at the simultaneous determination of these compounds is still needed. Hence, our contribution is devoted to fill this gap. After the optimization of clean-up and derivatization (conversion of saccharides in their trimethyl silyl ethers) steps, the adoption of a highly cross-linked silphenylene stationary phase permitted to obtain high resolution and a fast chromatographic run. Validation was accomplished in terms of limit of detection, limit of quantification, linearity, precision, and trueness. The accuracy of the method was successfully tested on a number of partially skimmed milk samples. Excellent limits of detection for all analytes make this method eligible, also with respect to a gas chromatographic/mass spectrometry approach, for routine analysis and quality control in the dairy industries. [ABSTRACT FROM AUTHOR]

Honey is one of the most renowned natural foods. Its composition is extremely variable, depending on its botanical and geographical origins, and the abundant presence of functional compounds has contributed to the increased worldwide interest is this foodstuff. In particular, great attention has been paid by the scientific community towards classes of compounds like phenolic compounds, due to their capability to act as markers of unifloral honey origin. In this contribution the most recent progress in the assessment of new analytical procedures aimed at the definition of the qualitative and quantitative profile of phenolic compounds of honey have been highlighted. A special emphasis has been placed on the innovative aspects concerning the extraction procedures, along with the most recent strategies proposed for the analysis of phenolic compounds. Moreover, the centrality of validation procedures has been claimed and extensively discussed in order to ensure the fitness-for-purpose of the proposed analytical methods. In addition, the exploitation of the phenolic profile as a tool for the classification of the botanical and geographical origin has been described, pointing out the usefulness of chemometrics in the interpretation of data sets originating from the analysis of polyphenols. Finally, recent results in concerning the evaluation of the antioxidant properties of unifloral honeys and the development of new analytical approaches aimed at measuring this parameter have been reviewed. [ABSTRACT FROM AUTHOR]

Purpose: To evaluate the fluoride concentration in enamel after the use of different fluoride products and 48 hours after the cessation of fluoride use. Methods: 16 enamel slabs were divided and treated for 15 days as following: Group A, with an amine fluoride toothpaste and mouthrinse (1400 and 250 mg/L-1, respectively); Group B, with an amine fluoride toothpaste (1400 mg/L-1) and mouthrinse without fluoride; Group C, with a sodium fluoride toothpaste (1400 mg/L-1) and mouthrinse (250 mg/L -1 Chemical biopsy and multiple means were used to determine fluoride concentration. The data were statistically analyzed using the two-way ANOVA and Tukey HSD tests (P< 0.05). Results: After 15 days of fluoride product use, Group A samples had the highest fluoride uptake (0.19 μg mm2) (P< 0.05). 48 hours after the interruption of fluoride product usage, a higher fluoride concentration was found in Group A samples. Although all fluoride products led to an enamel uptake, amine fluoride products promoted the most effective long-term uptake. [ABSTRACT FROM AUTHOR]

A novel polythiophene bearing a pendant terpyridine moiety has been synthesized by electrochemical polymerization of a new thiophene monomer, namely 4′-(2,2′:5′,2″-terthien-3′-ethynyl)-2,2′:6′,2″-terpyridine (TAT). The insertion of a conjugated ethynyl spacer between the terthiophene and the terpyridine fragments provides for an effective extension of the delocalization of electrons within the structural unit and the polymer as a whole. The synthesis and characterization of the relevant monomer, the electrosynthesis of the corresponding polymer and its electrochemical, UV-visible spectroelectrochemical and IR characterization are described. Finally, a comparison between the electrochemical, spectroscopic, and spectroelectrochemical properties of PTAT and the analogue, saturated-spacer PTTT (TTT = 4′-[(2,2′:5′,2″-terthien-3′-yl)methoxy]-2,2′:6′,2″-terpyridine) polymer is discussed. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011 [ABSTRACT FROM AUTHOR]

Abstract: In this study 5-hydroxymethyl-2-furaldehyde (HMF), 2-furaldehyde, 3-furaldehyde, 2-furoic acid and 3-furoic acid are contemporarily determined in honey using a swift and direct RP-HPLC approach. The validation protocol was performed in terms of detection and quantification limits, precision (by repeatability and reproducibility), linearity and accuracy (by recovery tests); the acceptability of the precision and accuracy results was positively verified using Horwitz''s model and AOAC guidelines, respectively. The method was tested on 18 honey samples of different ages, and botanical and geographical origin. HMF and 2-furaldehyde correlated highly with the age of the samples, whereas no correlation was observed with regards to 2-furaldehyde and 2-furoic acid. Hypotheses relating to the formation of minority furanic compounds are also proposed. [Copyright &y& Elsevier]

Abstract: The use of the RP-HPLC official method of the International Honey Commission (IHC) for the determination of 5-hydroxymethylfurfural (HMF) in strawberry tree honey (Arbutus unedo, a typical Sardinian honey) has brought to light a specific and heavy chromatographic interference that prevents accurate quantification. The interference has been identified as homogentisic acid (HA), i.e. the marker of the botanical origin of the honey. For this reason, an alternative RP-HPLC method is proposed. The bias-free method allows a complete separation of HMF from HA to the baseline level and is faster and more precise than the RP-HPLC official method: the detection and quantification limits are 1.9 and 4.0mgkg−1, respectively, whereas the repeatability is ca. 2% in the HMF concentration range of 5–140mgkg−1. [Copyright &y& Elsevier]

The lack of interest in the determination of toxic elements in liquids for electronic cigarettes (e-liquids) has so far been reflected in the scarce number of accurate and validated analytical methods devoted to this aim. Since the strong matrix effects observed for e-liquids constitute an exciting analytical challenge, the main goal of this study was to develop and validate an ICP-MS method aimed to quantify 23 elements in 37 e-liquids of different flavors. Great attention has been paid to the critical phases of sample pre-treatment, as well as to the optimization of the ICP-MS conditions for each element and of the quantification. All samples exhibited a very low amount of the elements under investigation. Indeed, the sum of their average concentration was of ca. 0.6 mg kg−1. Toxic elements were always below a few tens of a μg per kg−1 and, very often, their amount was below the relevant quantification limits. Tobacco and tonic flavors showed the highest and the lowest concentration of elements, respectively. The most abundant elements came frequently from propylene glycol and vegetal glycerin, as confirmed by PCA. A proper choice of these substances could further decrease the elemental concentration in e-liquids, which are probably barely involved as potential sources of toxic elements inhaled by vapers. [ABSTRACT FROM AUTHOR]

Iron, one of the most common metals in the environment, plays a fundamental role in many biological as well as biogeochemical processes, which determine its availability in different oxidation states. Its relevance in environmental and industrial chemistry, human physiology, and many other fields has made it necessary to develop and optimize analysis techniques for accurate determination. Spectrophotometric methods are the most frequently applied in the analytical determination of iron in real samples. Taking advantage of the fact that desferrioxamine B, a trihydroxamic acid used since the 1970s in chelation therapy for iron overload treatment, forms a single stable 1:1 complex with iron in whichever oxidation state it can be found, a smart spectrophotometric method for the analytical determination of iron concentration was developed. In particular, the full compliance with the Lambert-Beer law, the range of iron concentration, the influence of pH, and the interference of other metal ions have been taken into account. The proposed method was validated in terms of LoD, LoQ, linearity, precision, and trueness, and has been applied for total iron determination in natural water certified material and in biological reference materials such as control human urine and control serum. [ABSTRACT FROM AUTHOR]

Many imported honeys distributed on the Polish market compete with local products mainly by lower price, which can correspond to lower quality and widespread adulteration. The aim of the study was to compare honey samples (11 imported honey blends and 5 local honeys) based on their antioxidant activity (measured by DPPH, FRAP, and total phenolic content), protein profile obtained by native PAGE, soluble protein content, diastase, and acid phosphatase activities identified by zymography. These indicators were correlated with standard quality parameters (water, HMF, pH, free acidity, and electrical conductivity). It was found that raw local Polish honeys show higher antioxidant and enzymatic activity, as well as being more abundant in soluble protein. With the use of principal component analysis (PCA) and stepwise linear discriminant analysis (LDA) protein content and diastase number were found to be significant (p < 0.05) among all tested parameters to differentiate imported honey from raw local honeys. [ABSTRACT FROM AUTHOR]

Beehive products possess nutritional value and health-promoting properties and are recommended as so-called "superfoods". However, because of their natural origin, they may contain relevant elemental contaminants. Therefore, to assess the quality of bee products, we examined concentrations of a broad range of 24 selected elements in propolis, bee pollen, and royal jelly. The quantitative analyses were performed with inductively coupled plasma-mass spectrometry (ICP-MS) and inductively coupled plasma optical emission spectrometry (ICP-OES) techniques. The results of our research indicate that bee products contain essential macronutrients (i.e., K, P, and S) and micronutrients (i.e., Zn and Fe) in concentrations depending on the products' type. However, the presence of toxic heavy metals makes it necessary to test the quality of bee products before using them as dietary supplements. Bearing in mind that bee products are highly heterogenous and, depending on the environmental factors, differ in their elemental content, it is necessary to develop standards regulating the acceptable levels of inorganic pollutants. Furthermore, since bees and their products are considered to be an effective biomonitoring tool, our results may reflect the environment's condition in west-central Poland, affecting the health and well-being of both humans and bees. [ABSTRACT FROM AUTHOR]