Search

Low-complexity ultrasound systems are increasingly desired for both wearable, point-of-care ultrasound and high-end massive-channel ultrasound for 3-D matrix imaging. However, the imaging capabilities, including spatial resolution and contrast, could suffer as low complexity systems are pursued, which remains as an unresolved tradeoff. To mitigate this limitation, this study revisits the general structures of analog and digital beamformers and introduces a hybrid approach, referred to as analog-digital hybrid beamforming, to implement efficient ultrasound systems. The suggested hybrid beamforming takes two stages sequentially, where the first analog stage partially beamforms M-channel RF signals to N sum-out data (i.e., M-to-N beamforming), and the second digital stage beamforms N partial sums to single final beamformed data (i.e., N-to-1 beamforming). Our approach was systematically designed and implemented with only four major integrated circuits, which was capable of driving full 64-channel transmission and reception. The developed system was demonstrated with a customized 64-channel 1-D phased array using a commercial tissue mimicking phantom. From the phantom imaging results, signal-to-noise ratio, contrast-to-noise ratio, and full beam width at half maximum values were quantitatively evaluated. The demonstrated results indicate that the analog-digital hybrid beamforming can be applied to any type of array for sophisticated 3-D imaging and tiny wearable ultrasound applications. [ABSTRACT FROM AUTHOR]

Objective: Two-dimensional (2D) photoacoustic (PA) imaging based on array transducers provide high spatial resolution in the lateral direction by adopting receive dynamic focusing. However, the quality of PA image is often deteriorated by poor elevational resolution which is achieved by an acoustic lens. To overcome this limitation, we present a three-dimensional (3D) image reconstruction method using a commercial one-dimensional (1D) array transducer. Methods: In the method, the elevational resolution is improved by applying synthetic aperture focusing (SAF) technique along the elevational direction. For this, a commercially available 1D array transducer with an acoustic lens is modeled and appropriate synthetic focusing delay that can minimize the effect of the acoustic lens is derived by mathematical analysis. Results: From the simulation and experiment results, it was demonstrated that the proposed method can enhance the image quality of PA imaging, i.e., elevational resolution and signal-to-noise ratio (SNR). Conclusion: 3D PA images with improved elevational resolution were achieved using a clinical 1D array transducer. Significance: The presented method may be useful for clinical application such as detecting microcalcification, imaging of tumor vasculature and guidance of biopsy in real time. [ABSTRACT FROM AUTHOR]

Objective: Although plane wave imaging (PWI) with multiple plane waves (PWs) steered at different angles enables ultrafast three-dimensional (3-D) ultrasonic imaging, there is still a challenging tradeoff between image quality and frame rate. To address this challenge, we recently proposed the aperiodic PWI (APWI) with mathematical analysis and simulation study. In this paper, we demonstrate the feasibility of APWI and evaluate the performance with phantom and in vivo experiments. Methods: APWI with a concentric ring angle pattern (APWI-C) and APWI with a sunflower pattern (APWI-S) are evaluated. For experimental verification of the methods, the experimental results are compared with simulation results in terms of the spatial resolution and the mainlobe-to-sidelobe ratio. In addition, the performance of APWI is compared with that of conventional PWI by using a commercial phantom. To examine the potential for clinical use of APWI, a gallstone phantom study and an in vivo carotid artery experiment are also conducted. Results: In the phantom study, the APWI methods provide a contrast ratio approximately 2–3 dB higher than that of PWI. In a gallstone experiment, the proposed methods yield 3-D rendered stone images more similar to the real stones than PWI. In the in vivo carotid artery images, APWI reduces the clutter artifacts inside the artery. Conclusion: Phantom and in vivo studies show that the APWI enhances the contrast without compromising the spatial resolution and frame rate. Significance: This study experimentally demonstrates the feasibility and advantage of APWI for ultrafast 3-D ultrasonic imaging. [ABSTRACT FROM AUTHOR]

Objective: The ultrasound baseband in-phase/quadrature beamformer (IQBF) has been widely employed in medical ultrasound imaging to reduce the amount of channel data or to decrease the data rate of the beamforming process. The aim of this study is to assess the effect of the time and phase delay compensation accuracies on the IQBF and thereby to suggest the criteria for selecting the delay resolutions of the IQBF. Methods: Mathematical models of the gain loss (GL) and sidelobe level (SL) in closed form are suggested, and the relationships between the parameters (time and phase delay resolutions of the IQBF and the signal bandwidth) and the errors (GL and SL) are investigated. The performance of the IQBF is compared with that of the traditional radio-frequency beamformer (RFBF). Simulation and phantom and in vivo experimental results are shown to corroborate the theoretical analysis. Results and Conclusion: Theoretical analysis and simulation and experimental results show that a phase delay resolution with a quantization step of 2π/64 is sufficient for phase compensation and that a time delay resolution with a sampling rate of 4f0 and 2f0 in the IQBF is sufficient for data with a –6 dB bandwidth of 50% and 25%, respectively, for similar performance as the RFBF with a sampling rate of 16f0, where f0 is the center frequency of the ultrasound signal. Significance: The suggested criteria have the potential to be used for designing an efficient IQBF satisfying the desired specifications and beamforming accuracy. [ABSTRACT FROM AUTHOR]

Sparse arrays have been studied mainly to reduce the large numbers of elements in 2-D arrays. However, they can also provide an effective means of miniaturizing ultrasound 1-D array systems for point-of-care applications. Although a variety of sparse array design strategies have been proposed, designing an optimum sparse array to simultaneously satisfy the system specification requirements and performance criteria remains a challenge. This article presents an analytical approach for the design of an optimum pair of periodic sparse arrays (PSAs), one for transmission and the other for reception. The approach is based on three newly derived theorems that describe the most important properties of the two PSAs forming the sparse array pair and their relationship pertaining to the overall beam pattern. The proposed approach can be used to design 1-D sparse array pairs with arbitrary sparseness factors while meeting given performance criteria. The computer simulation verified that the spatial resolution of a 64-element phased array can be obtained with a PSA pair consisting of transmit and receive sparse arrays, of which the number of elements is reduced to 32 and 22, respectively. [ABSTRACT FROM AUTHOR]

Three-dimensional plane wave imaging (PWI) with a 2-D array has been studied for ultrafast volumetric imaging in medical ultrasound. Compared to 2-D PWI, 3-D PWI requires the transmission of an increased number of plane waves (PWs) to scan a volume of interest and achieve transmit dynamic focusing in both the lateral and elevational directions. To reduce the number of PW angles for a given 2-D angular range by mitigating the grating lobe level, we propose two aperiodic patterns of PW angles: concentric rings with a uniform radial interval and the well-known sunflower pattern. Both patterns are validated to provide uniform angle distributions without regular periodicity, and thereby reduce the grating lobe level compared to a periodic angle distribution with the same number of PW angles. Simulation studies show that the aperiodic patterns enhance the contrast of B-mode images by approximately 3–6 dB over all depths. This enhancement implies that the aperiodic angle sets can increase the volume rate by approximately 2–6 times compared to the periodic angle set at the same contrast and spatial resolution. [ABSTRACT FROM AUTHOR]

The spatiotemporal accuracy of passive acoustic mapping (PAM) for monitoring in situ cavitation bubbles has not been assessed directly via optical means. Here, the cavitation bubbles are monitored from two image sequences obtained simultaneously with PAM and high-speed photography (HSP). The temporal accuracy of PAM for detecting cavitation nucleation and the spatial resolution for cavitation localization are compared with those measured from HSP. The results show that PAM has a temporal accuracy of 20 μ s. Mean differences in the spatial locations of PAM and HSP are as small as 10.0 and 30.5 μm along the lateral and axial directions, respectively. [ABSTRACT FROM AUTHOR]

In this study, we sought to describe a novel imaging apparatus that is lightweight, inexpensive, and highly effective for use in colorectal diagnostic and treatment settings. Typical probes for use in colorectal ultrasonic imaging applications are developed for surgeons to diagnose and stage rectal tumors and image the rectum and anus. Here we outline a new technique and use it for colorectal imaging in an animal. This technique involves use of an ultrasound array module positioned along the axis of rotation such that improved rotation is possible. This module is in the shape of a linear rod with a rotary linear component that allows for emission of focused ultrasonic echo signals from a linear section of the probe. The usability of the transducer and rectal image quality are satisfactory in a porcine model with the technique proposed here, axial/lateral resolution as 0.96/2.24 mm with 6 dB applied through the contour map using the point spread function. When compared to currently available methods, this technique provides superior diagnostic 3D volumetric image quality with reduced acquisition time. Given this, the ultrasound device proposed here may prove a viable and preferable method to those currently available for urology and colorectal imaging applications. [ABSTRACT FROM AUTHOR]

Synthetic transmit focusing (STF) methods using unfocused waves or plane waves (PWs) have recently been investigated extensively. However, STF using PWs with a convex array (PWSTF-CA) has not been rigorously studied for high-resolution sector imaging. In this paper, the authors suggest an analytical model for accurate characterization of the spatial beam patterns of PWSTF-CA using a large range of either uniformly or non-uniformly distributed PW angles. On the basis of the model, a frame-based PWSTF-CA approach with non-uniform PW angles is suggested to achieve superior image quality at a higher frame rate than conventional transmit focusing (CTF). The analytical model can also be used for optimal selection of a set of PW angles to scan the entire sectorial field of view and its subsets employed for STF at each imaging point. The authors also investigate how to select transmit subarrays for each of the PWs to obtain the best spatial resolution. A theoretical analysis and simulations are conducted for the verification of the analytical model and the optimal utilization strategy of PWSTF-CA. The results indicate that the PWSTF-CA improves not only the frame rate but also the contrast, signal-to-noise ratio, and resolution compared with the CTF, as in the case of PWSTF with linear arrays. [ABSTRACT FROM AUTHOR]

Plane wave imaging has been proven to provide transmit beams with a narrow and uniform beam width throughout the imaging depth. The transmit beam pattern, however, exhibits strong grating lobes that have to be suppressed by a tightly focused receive beam pattern. In this paper, we present the conditions of grating lobe occurrence by analyzing the synthetic transmit beam pattern. Based on the analysis, the threshold of the angle interval is presented to completely eliminate grating lobe problems when using uniformly distributed plane wave angles. However, this threshold requires a very small angle interval (or, equivalently, too many angles). We propose the use of non-uniform plane wave angles to disperse the grating lobes in the spatial domain. In this paper, we present an approach using two uniform angle sets with different intervals to generate a non-uniform angle set. The proposed methods were verified by continuous-wave transmit beam patterns and broad-band 2D point spread functions obtained by computer simulations. [ABSTRACT FROM AUTHOR]

In this paper, we present a novel system-on-chip (SOC) solution for a portable ultrasound imaging system (PUS) for point-of-care applications. The PUS-SOC includes all of the signal processing modules (i.e., the transmit and dynamic receive beamformer modules, mid- and back-end processors, and color Doppler processors) as well as an efficient architecture for hardware-based imaging methods (e.g., dynamic delay calculation, multi-beamforming, and coded excitation and compression). The PUS-SOC was fabricated using a UMC 130-nm NAND process and has 16.8 GFLOPS of computing power with a total equivalent gate count of 12.1 million, which is comparable to a Pentium-4 CPU. The size and power consumption of the PUS-SOC are 27\times 27~mm^2 and 1.2 W, respectively. Based on the PUS-SOC, a prototype hand-held US imaging system was implemented. Phantom experiments demonstrated that the PUS-SOC can provide appropriate image quality for point-of-care applications with a compact PDA size (200\times 120\times 45~mm^3) and 3 hours of battery life. [ABSTRACT FROM PUBLISHER]

Background: The aim of this study was to evaluate the diagnostic utility of PAI at detecting thyroid microcalcifications at 700 nm laser wavelengths. Methods: This study included 36 resected samples in 18 patients. To evaluate the PA manifestation of microcalcifications in PAI, gray level histogram and co-occurrence matrix (COM) texture parameters were extracted from the 3 fixed ROI US and PA images, respectively, per sample. We compared the textural parameters obtained from specimen PAIs between samples with punctate microcalcifications on specimen radiography and those without microcalcifications. Results: On specimen US, the mean value (2748.4±862.5) of samples with microcalcifications on specimen radiography was higher than that (1961.9±780.2) of those without microcalcifications (P = 0.007). However, there were no significant differences in textural parameters obtained from specimen PAIs between samples with punctate microcalcifications on specimen radiography and those without when applying both the mean value of the three slices of thyroid specimens and the value of the thyroid specimen slice which had the highest value of the mean values in specimen US. Conclusion: PAI did not show significant PA contrast on thyroid microcalcifications indicating that the experimental setup and protocols should be enhanced, e.g., method of complete blood rejection from ex vivo specimens, the multi-wavelength spectroscopic PA imaging method which can solely extract the PA signal from microcalcifications even with high spectral interferences, or PA imaging with narrower slice thickness using 2-dimensional array transducer, etc. [ABSTRACT FROM AUTHOR]

In medical ultrasound imaging, lateral resolution is limited when using a fixed transmit focusing. Various synthetic aperture (SA) techniques, in which two-way dynamic focusing is enabled by utilizing prebeamformed radio-frequency (RF) data have been proposed for improving the spatial resolution. However, SA methods were not extensively evaluated in terms of their clinical performance. In this paper, a phantom and an in vivo evaluation of the SA method with bidirectional pixel-based focusing (BiPBF) is presented in comparison with the conventional beamforming. The performance of the proposed SA-BiPBF was assessed with a blind study and the established breast imaging–reporting and data system (BI-RADS), in addition to measuring contrast-to-noise ratio (CNR) and signal-to-noise ratio (SNR). Prebeamformed RF data were acquired from a tissue mimicking phantom (Model 040, CIRS Inc., Norfolk, VA, USA) and from patients with breast lesions by using a commercial ultrasound scanning system with a linear array transducer equipped with a research package and parallel data acquisition system (SonixTouch, SonixDAQ, and L14-5/38, Ultrasonix Corp., Canada). In phantom and in vivo experiments, a default setting of a breast preset was applied (e.g., the center frequency of 10 MHz and acoustic output of MI = 0.66). In phantom experiment, the SA-BiPBF method showed higher CNR and SNR values compared to the conventional method (3.4 and 23.9 dB versus 3.1 and 15.8 dB, respectively). In addition, the lateral resolution and penetration depth were increased by 95.4% and 40.3%, respectively. Consistent with the phantom experiment, in the in vivo experiment with ten patients, the CNR value for the SA method was 3.3 \pm 0.5 compared to 2.8 \pm 0.8 for the conventional method. Similarly, the SNR values with the SA-BiPBF and conventional methods were 34.0 \pm 3.6 and 27.2 \pm 3.4 dB, respectively. From the experiments, it was shown in side-by-side comparisons that the image quality of the SA-BiPBF method was considerably improved in both phantom and in vivo breast images. However, the SA-BiPBF image showed different features compared to the conventional one in the in vivo experiments. These features are resulting from the increased image quality of the SA-BiPBF method but are not always perceived as improvements by the radiologists. [ABSTRACT FROM PUBLISHER]