Search

The anomalous enrichment of the rare earth elements and yttrium (REY), U, Mo, As, Se, and V in the coal-bearing intervals intercalated within the carbonate successions in South China has attracted much attention due to the highly promising recovery potential for these elements. This study investigates the mineralogical and geochemical characteristics of the late Permian coal-bearing intervals (layers A–F) intercalated in marine carbonate strata in the Xian'an Coalfield in Guangxi Province to elucidate the mode of occurrence and enrichment process of highly elevated elements. There are two mineralogical assemblages, including quartz-albite-kaolinite-carbonates assemblage in layers D–F and quartz-illite-kaolinite-carbonates assemblage in layers A–C. Compared to the upper continental crust composition (UCC), the REY, U, Mo, As, Se, and V are predominantly enriched in layers A and B, of which layer A displays the REY–V–Se–As assemblage while layer B shows the Mo–U–V assemblage. The elevated REY contents in layer B are primarily hosted by clay minerals, zircon, and monazite; Mo, U, and V show organic association; and As and Se primarily display Fe-sulfide association. Three geological factors are most likely responsible for geochemical anomaly: (1) the more intensive seawater invasion gives rise to higher sulfur, Co, Ni, As, and Se contents, as well as higher Sr/Ba ratio in layers A–C than in layers D–F; (2) both the input of alkaline pyroclastic materials and the solution/rock interaction jointly govern the anomalous enrichment of REY; and (3) the influx of syngenetic or early diagenetic hydrothermal fluids is the predominant source of U, Mo, V, Se, and As. [ABSTRACT FROM AUTHOR]

During the Late Paleozoic, West Junggar (Xinjiang, NW China) experienced a shift in tectonic setting from compression to extension. Ha'erjiao is an important area for investigating collisional structures, post–collisional structures, and magmatic activities. Based on the petrological and geochemical characteristics of pyroclastic and other volcanic rocks in the Permian Kalagang Formation from the borehole ZKH1205 in the Jimunai Basin, the main types of source rock for the pyroclastic rocks deposited in the basin are identified and their implications for the Early Permian tectonic setting examined. The abundance of basalt and andesite lithic fragments in the pyroclastic rocks, together with the REE characteristics and the contents of transition and high field strength elements show that the source rocks were chiefly intermediate–basic volcanic rocks. High ICV values, low CIA values, low Rb/Sr ratios, low Th/U ratios and the mineralogical features suggest weak chemical weathering of the source rocks; the geochemical patterns of the pyroclastic rocks might not only have been impacted by crustal contamination but also might be related to the nature of the magma from the source area. The geochemical properties of the pyroclastic rocks distinguish them from arc‐related ones, and such samples plot in the within‐plate basalt (WPB) field in some diagrams. This is consistent with the formation background of the Early Permian volcanic rocks in this region. [ABSTRACT FROM AUTHOR]

The Ordovician–Silurian (O–S) transition was a critical interval in geological history. Multiple geochemical methods are used to explore the changes in oceanic environment. The Nd isotopic compositions in the Yangtze Sea are controlled by two sources: the continental erosion and the Panthalassa Ocean. High ε Nd(t) values during the Katian, late Hirnantian and Rhuddanian intervals are associated with the high sea level, which resulted in less terrestrial input based on the low Ti/Al and Zr/Al ratios. In contrast, low ε Nd(t) values during the early Hirnantian interval are related to the sea-level fall; in this case, the exposure of submarine highs and the growth of Yangtze Oldlands could lead to more continental materials being transported into the Yangtze Sea based on high Ti/Al and Zr/Al ratios. In addition, the negative ε Nd(t) excursion can also be attributed to the weak circulation between the Yangtze Sea and Panthalassa Ocean when sea level was low. Furthermore, the sea-level eustacy plays a significant role in the changes in redox water conditions. The redox indices, mainly UEF, Ce/Ce* and Corg/PT, across the O–S transition show a predominance of anoxic ocean over the Yangtze Sea during the Katian, late Hirnantian and Rhuddanian intervals, and an oxygenated episode was briefly introduced during the early Hirnantian period because of the fall in sea level. The Late Ordovician biotic crisis was marked by two-phase extinction events, and the change in sea level and redox chemistry may be the important kill mechanisms. [ABSTRACT FROM AUTHOR]

The lowermost Late Permian coal seam (C4 Coal) in the Tongzi Coalfield offers an opportunity to investigate the influence of terrigenous detrital materials from the Qianbei Upland on the mineralogical and geochemical patterns of the C4 Coal. The minerals are mainly dominated by pyrite and, to a lesser extent, tobelite, kaolinite, and calcite, along with traces of Al-oxyhydroxide minerals. The various degrees of marine influence may have resulted in the variation in the amount of Fe-sulfides (e.g., pyrite) and elements having Fe-sulfides affinity. Furthermore, the abundant Fe ions involved in the formation of Fe-sulfides were most likely derived from the claystone on the Qianbei Upland. The tobelite identified in the C4 Coal probably originated from the interaction between pre-existing kaolinite and NH4+ from NH3 released from the thermally affected organic matter at least shortly after the highly volatile bituminous stage under NH4+-rich and K+-poor conditions. The terrigenous detrital materials were derived from two possible sediment-region sources-the Qianbei Upland and Kangdian Upland-which is different from Late Permian coals in Western Guizhou Province. The claystone on the Qianbei Upland may have served as parent rock, as indicated by the presence of the Al-oxyhydroxide minerals as well as low SiO2/Al2O3 ratio (0.66 on average) and low quartz content. Meanwhile, the detrital materials from the Kangdian Upland most likely originated from the erosion of the felsic rocks at the uppermost part of the Kangdian Upland, as evidenced by the high Al2O3/TiO2 ratio (36.0 on average) and the strongly negative Eu anomaly (0.61 on average). [ABSTRACT FROM AUTHOR]

The sandstone from the Oligocene Xiaganchaigou Formation (E3) in the Lengdong area, Qaidam Basin, China, is extensively distributed and acts as an effective regional reservoir for hydrocarbon accumulation. Based on thin sections, scanning electron microscopy (SEM), X-ray diffraction (XRD) image analysis and cathodoluminescence (CL), a comprehensive analysis of the sedimentology, petrography, diagenesis and reservoir quality of the Oligocene sandstone reservoirs of the Xiaganchaigou (E3) Formation in the Lengdong area, Qaidam Basin, are studied. The sandstones in the Lengdong area are classified as argillaceous sandstone, silty sandstone, fine sandstone, medium sandstone, pebbly sandstone, conglomeratic sandstone and conglomerate based on their grain sizes, degrees of sorting, and matrix contents. Five sedimentary facies were identified in the Xiaganchaigou Formation (E3) of the Lengdong area, Qaidam Basin: distributary channel, interdistributary bay, mouth bar, central bar and distal sand sheet facies. Their major diagenetic processes include compaction, carbonate cementation and feldspar and calcite cement dissolution. The porosity and permeability values of the fine sandstone, conglomerate, and conglomeratic sandstone are the highest, followed by those of the medium sandstone and silty sandstone, and the argillaceous sandstone and pebbly sandstone have the lowest porosity and permeability values. The diagenetic sequence in the study area ranges from the eodiagenesis B stage to the mesodiagenetic A stage. Compaction has significantly reduced the primary porosity. Carbonate cements, mainly calcite cements, occlude pores by precipitating in intergranular and intragranular spaces. Dissolution largely contributes to increasing the secondary porosity. The well-sorted and relatively coarser-grained sandstones that formed in higher-energy sedimentary facies (distributary channel, mouth bar and central bar) have a better reservoir quality than the poorly sorted, clay-rich sandstones that formed in low-energy environments (interdistributary bay and distal sand sheet). Based on the comprehensive analysis of petrographic data, diagenesis and sedimentary facies, the reservoir in the Lengdong area is classified into three types: type A, type B and type C. Type A, located in the center of the study area, is the most favorable reservoir, while type C sandstone is the last to consider when looking for a good reservoir. This study can guide hydrocarbon exploration in the Lengdong area, as well as in northwestern China and similar areas throughout the world. [ABSTRACT FROM AUTHOR]

The highly elevated concentrations of the rare earth elements and yttrium (REY), U, Mo, Se, and Pb in late Permian coals in some coalfields in Guangxi Province, South China, have been widely investigated; however, the mode of occurrence and enrichment mechanism of these critical elements are still under debate. This study investigates the mineralogical and geochemical compositions of coals and non-coal rocks from the Xian'an Coalfield in Guangxi Province to discuss the geological factors influencing the distribution of critical elements. The mineral in the studied coals consists mainly of quartz, and to a lesser extent, muscovite and kaolinite, with a trace amount of anatase. The coals are significantly enriched in REY, Pb, Se, Mo, and U and display the REY–U–Se–Mo–Pb-enrichment horizon (Horizon I) and U–Mo-enrichment horizon (Horizon II) adjacent to the host rocks or partings. The REY, U, Se, and Pb show organic association while Mo is primarily hosted by Fe-sulfides within Horizon I. The U and Mo have a phosphate affinity within Horizon II. Both the input of pyroclastic and epiclastic materials and the leaching of acidic solutions jointly govern the distribution of the REY–U–Se–Mo–Pb-enrichment horizon (Horizon I) and the U–Mo-enrichment horizon (Horizon II). The concentrations of REY in Horizon I exceed the cutoff grade of REY, and, therefore, the coals in the Horizon I can be regarded as promising raw materials of REY. [ABSTRACT FROM AUTHOR]

Superhigh organic sulfur(SHOS) coals have currently attracted great attention due to their typical depositional environments and formation history as well as their great negative impact on the ecosystem. This study investigated the geochemistry of the No. 11coalof the Late Carboniferous Taiyuan Formation from the Sangshuping coalmine, Hancheng miningarea, Weibei coalfield, Shaanxi, North China. The No. 11 coal is a high-sulfur coal with a large proportion of organic sulfur content (3.7 to 5.5%, avg. 4.4%) and belongs to typical SHOS coal. The high sulfur content in the Sangshuping coal mine has been mainly caused by the combined influences of seawater and hydrothermal fluids. The SHOS in No. 11 coal was formed in the Fe-poor and S-rich high-marine influenced occlusive environment. During the late coalification stage, a high proportion of pyritic sulfur was formed due to sufficient Fe supply from the Fe–S-rich epigenetic hydrothermal fluids. The No. 11 SHOS coal is enriched in Li–Ga–Zr–Hf and Se–Mo–Cr–V–As–Pb element assemblages. The sediment provenance of the Sangshuping coal mine is predominantly felsic–intermediate rocks from both the Yinshan and Qinling Oldland. However, the elevated concentrations of critical elements (Li, Ga, Zr, and Hf) in the No. 11 coal are primarily inherited from the Yinshan Oldland. The enrichment of the Se–Mo–Cr–V–As–Pb assemblage in No. 11 coal can be ascribed to the influence of both seawater and epigenetic hydrothermal activity. [ABSTRACT FROM AUTHOR]

Mineralogical and geochemical characteristics of coals provide crucial information on their potential clean, efficient, and integrated utilization. In this paper, the mineralogical and geochemical behaviors of the No. 5 coals of the Taiyuan Formation in the Weibei Coalfield, North China, were investigated, and their geological controlling factors were subsequently discussed. The minerals in the Weibei coals mainly consist of kaolinite (8.3%), calcite (5.0%), and pyrite (3.1%), with minor proportions of tobelite (2.9%), dolomite (1.7%), quartz (1.8%), and traces of siderite (0.4%) and gypsum (0.6%). Several critical elements, including Nb (19.8 mg/kg), Ta (3.6 mg/kg), Zr (71.0 mg/kg) and Li (32.3 mg/kg), occur at concentrations higher than those averages for world hard coals, making the Weibei coals potential sources of these critical elements. Several factors, terrigenous material, seawater invasion, and hydrothermal fluids are responsible for these mineralogical and geochemical characteristics. The L-type rare earth elements and yttrium (REE-Y) enrichment in the roofs and partings, Al2O3-TiO2 and Zr/TiO2-Nb/Y plots, and negative Eu and weak negative Ce anomalies in the Weibei coals indicate a felsic-intermediate dominated sediment provenance primarily derived from the Qilian-Qinling Oldland on the South. Marine bioclastic limestone, negative Ce and positive Y anomalies in coals imply the influence of seawater on the Weibei coals. Last but not least, the cleat-infilling and/or fracture-infilling calcite, pyrite, barite, and tobelite as well as the positive Eu and Gd anomalies, H-type, and M-type REE-Y enrichment patterns suggest the influence of hydrothermal fluids, which lead to re-distribution of some critical elements from roof and parting to the underlying coal seam. [ABSTRACT FROM AUTHOR]

Coal as the source of critical elements has attracted much attention and the enrichment mechanisms are of significant importance. This paper has an opportunity to investigate the mineralogical and geochemical characteristics of the Permian and Jurassic bituminous coals and associated non-coals from two underground coal mines in the Shanbei Coalfield (Northeast Ordos basin), Shaanxi Province, North China, based on the analysis of X-ray diffraction (XRD), inductively coupled plasma atomic-emission spectrometry (ICP-AES/MS), and scanning electron microscopy-energy-dispersive X-ray spectroscopy (SEM-EDS). The Jurassic and Permian coals have similar chemical features excluding ash yield, which is significantly higher in the Permian coals. Major mineral matters in the Jurassic coals are quartz, kaolinite, and calcite. By contrast, mineral assemblages of the Permian coals are dominated by kaolinite; and apatite occurring in the middle section's partings. The Jurassic coals are only enriched in B, whereas the Permian coals are enriched in some trace elements (e.g., Nb, Ta, Th, and REY). Boron has a mixed inorganic and organic association which may be absorbed by organic matter from fluid (or groundwater) or inherited from coal-forming plants. Additionally, climatic variation also plays an important role. As for the Permian coals, kaolinite and apatite as the major carriers of elevated elements; the former were derived from the sedimentary source region (the Yinshan Oldland and the Benxi formation) and later precipitated from Ca-, and P-rich solutions. We deduced that those elevated elements may be controlled by the source rock and diagenetic fluid input. The findings of this work offered new data to figure out the mechanism of trace element enrichment of coal in the Ordos basin. [ABSTRACT FROM AUTHOR]

The mineralogical and geochemical characteristics of feed coals and coal combustion products (CCPs) from the Shenhuo and Yihua Power Plants in Xinjiang Autonomous Region, were studied by means of proximate analysis, Power X-ray diffraction (XRD), scanning electron microscopy with Energy Dispersive X-ray analyzer (SEM-EDX), inductively coupled plasma atomic emission spectrometry (ICP-MS) and inductively coupled plasma mass spectrometry (ICP-AES). The environmental geochemistry of CCPs was evaluated by Al-normalized enrichment factor as well as European Standard EN-12457 leaching test. Two feed coals have the characteristics of low sulfur content, medium to high volatiles matter yields, medium moisture content, super low to medium ash yield, medium to high calorific value and low mineral content. The main crystalline facies in fly ash and slag are quartz and mullite, with a small amount of calcite, and some unburned carbon. Hematite, SrSO4 and barite also can be observed in fly ashes by SEM. Typical plerophere occurs in fine fly ash rather than the coarse fly ash. The concentration of most trace elements in CCPs falls within the lower concentration range of European fly ashes. With respect to the partitioning behavior of trace elements during coal combustion, S is highly volatile, and Mg, Na, Zn, B, Co, As, Nb, Zr, Cu and K also show certain volatility, which may to some extent emit to the atmosphere. Furthermore, leaching experiments show that leachable concentrations of most of the potentially toxic elements in CCPs are low, and the CCPs fall in the range between inert and nonhazardous landfill material regulated by the 2003/33/EC Decision. [ABSTRACT FROM AUTHOR]

This study investigates arsenic (As) species, sources, and transformation patterns in deposited coal mine dust (DCMD) from three coal mines-QSY, MHJ, and SCC-in the Ningdong Coalfield, China. While the parent coals have low As levels, the DCMD shows significant enrichment, with concentrations 137 to 345 times higher. The mineral composition of the DCMD reflects that of the parent coals but includes secondary minerals such as gypsum and various trace elements, including As. This enrichment results from multiple factors: polluted waters used for dust control in the working front (WF), gangue dust introduced during mining operations, wear from mining machinery affecting Fe levels, and precipitation of As-salts from alkaline mine drainage. In the parent coals, As(V) comprises 60-65 % of the As, while As(III) accounts for 14-35 %. In contrast, the DCMD samples reveal As(V) as the dominant species (22-58 %), with As(III) making up 18-44 %. Arsenic leachability is influenced by Fe content, enhancing As adsorption and limiting mobility in QSY mine, while mixed As complexes in MHJ and SCC under alkaline conditions affect As mobility. The presence of more toxic As(III) in DCMD highlights environmental and health risks, emphasizing the need to avoid high-As polluted waters for dust control., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)