Search

New conception of adiabatic shear bands (ASB) and adiabatic shear failure mechanisms are proposed as special type of critical phenomen, structural-scaling transition, in the ensembles of microshears, governed by the characteristic non-linearity (metastability) of stored (free) energy of solid with mesodefects. Corresponding free energy release kinetics provides experimentally observed ASB induced staging of plastic strain localization and transition to adiabatic shear failure. ASB staging follows to collective properties of microshears ensemble given by the self-similar solutions of evolution equation providing spatial-temporal microshears localization, momentum transfer and damage localization. The criticality of ASB induced plastic strain localization and failure allows us to avoid the discrepancy in the interpretation of ASB effects as thermo-plastic instability in the balance of the stored energy and structural DRX transformation. The microshear ensemble is considered as the second phase and initiation of collective modes provide different staging according to the metastability decomposition and ASB scaling properties following to the self-similar solutions. Self-similar nature of microshears collective modes providing the ASB dynamics is analyzed as the mechanism of steady plastic wave front unversality in shocked materials. The dynamic split Hopkinson pressure bar tests were conducted with AlMg6 alloy combined with �in-situ� imaging of temperature kinetics by CEDIP Silver 450M high-speed infrared camera with conclusion of the secondary role of thermoplastic instability at the ASB staging. The microstructural study performed by an electron microscopy revealed the correlated behavior of the ensemble of defects, which can be classified as a structural transition and precursor of ASB induced strain localization and failure. The modeling reflecting the links of self-similar solutions in microshear ensembles with relaxation properies and damage localization was applied for the comparative analysis of ASB staging and temperature dynamics given be the infrared imaging

The work is devoted to the study of the Zr-1Nb alloy in coarse-grained and ultrafine-grained states under laser-induced shock-wave loading. This material is of interest due to the application for the manufacture of shells for fuel elements of nuclear reactors. The properties of this alloy in the ultrafine-grained state is attracted for the reliability improvement of fuel rods in wide range of load intensity. Shock wave loading was carried out using a Beamtech SGR-Extra-10 high-energy nanosecond laser. The free surface velocity profiles were registered by the VISAR system. Mechanical characteristics are obtained using velocity profiles. It is shown that the spall strength and dynamic elastic limit for the coarse-grained state are higher than for the ultrafine-grained state. In general, the Zr-1Nb alloy in the ultrafine-grained state is more susceptible to spall fracture, including laser shock peening. Numerical simulation of the process under study has been carried out using statistically based nonlinear model of solid with defects and finite element method to describe the deformation behavior and fracture of the material under shock-wave loading. Simulation results are qualitatively consistent with experiments in the prediction of the conditions of spall failure.

The paper focuses on the experimental and theoretical study of plastic deformation instability and localization in materials subjected to dynamic loading and high-velocity perforation. We investigate the behavior of samples dynamically loaded during Hopkinson-Kolsky pressure bar tests in a regime close to simple shear conditions. Experiments were carried out using samples of a special shape and appropriate test rigging, which allowed us to realize a plane strain state. Also, the shear-compression specimens proposed in were investigated. The lateral surface of the samples was investigated in a real-time mode with the aid of a high-speed infra-red camera CEDIP Silver 450M. The temperature field distribution obtained at different time made it possible to trace the evolution of plastic strain localization. Use of a transmission electron microscope for studying the surface of samples showed that in the regions of strain localization there are parts taking the shape of bands and honeycomb structure in the deformed layer. The process of target perforation involving plug formation and ejection was investigated using a high-speed infra-red camera. A specially designed ballistic set-up for studying perforation was used to test samples in different impulse loading regimes followed by plastic flow instability and plug ejection. Changes in the velocity of the rear surface at different time of plug ejection were analyzed by Doppler interferometry techniques. The microstructure of tested samples was analyzed using an optical interferometer-profilometer and a scanning electron microscope. The subsequent processing of 3D deformation relief data enabled estimation of the distribution of plastic strain gradients at different time of plug formation and ejection. It has been found that in strain localization areas the subgrains are elongated taking the shape of bands and undergo fragmentation leading to the formation of super-microcrystalline structure, in which the size of grains is ~300nm. Rotational deformation modes give rise to the high angular disorientations of grains. The development of plastic shear instability regions has been simulated numerically. For this purpose, we use a recently developed theory, in which the influence of microshears on the deformation properties of materials has been studied by the methods of statistical physics and thermodynamics of irreversible processes. The results of theoretical and experimental studies suggest that one of the mechanisms of the plastic shear instability and localization of plastic strain at high-velocity perforation is related to structural and kinetic transitions in microshear ensembles