Search

Blends of poly(lactic acid) (PLA) with poly(propylene carbonate) (PPC) are currently in the phase of intensive study due to their promising properties and environmentally friendly features. Intensive study and further commercialization of PPC-based polymers or their blends, as usual, will soon face the problem of their waste occurring in the environment, including soil. For this reason, it is worth comprehensively studying the degradation rate of these polymers over a long period of time in soil and, for comparison, in phosphate buffer to understand the difference in this process and evaluate the potential application of such materials toward agrochemical and agricultural purposes. The degradation rate of the samples was generally accompanied by weight loss and a decrease in molecular weight, which was facilitated by the presence of PPC. The incubation of the samples in the aqueous media yielded greater surface erosions compared to the degradation in soil, which was attributed to the leaching of the low molecular degradation species out of the foils. The phytotoxicity study confirmed the no toxic impact of the PPC on tested plants, indicating it as a "green" material, which is crucial information for further, more comprehensive study of this polymer toward any type of sustainable application. [ABSTRACT FROM AUTHOR]

The aim of this study was to develop a novel amikacin (AMI) delivery system with prolonged release based on composite electrospun nanofibers of PLA supplemented with AMI-loaded Si nanoparticles of different morphology. The resultant materials were characterized in terms of their physical properties (scanning electron microscopy, Brunauer–Emmett–Teller analysis, thermogravimetric analysis, water contact angle). High-Performance Liquid Chromatography was used to determine the AMI content in the liquid fractions obtained from the release study. The results show that nanofibers of fumed silica exhibited an aggregated, highly porous structure, whereas nanofibers of mesoporous silica had a spherical morphology. Both silica nanoparticles had a significant effect on the hydrophilic properties of PLA nanofiber surfaces. The liquid fractions were investigated to gauge the encapsulation efficiency (EE) and loading efficiency (LE) of AMI, demonstrating 66% EE and 52% LE for nanofibers of fumed silica compared to nanofibers of mesoporous silica nanoparticles (52% EE and 12.7% LE). The antibacterial activity of the AMI-loaded nanofibers was determined by the Kirby–Bauer Method. These results demonstrated that the PLA-based silica nanofibers effectively enhanced the antibacterial properties against the Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, and Klebsiella pneumoniae. [ABSTRACT FROM AUTHOR]

This manuscript details the preparation and characterization of a renewable biocomposite material intended as a soil conditioner based on low-molecular-weight poly(lactic acid) (PLA) and residual biomass (wheat straw and wood sawdust). The swelling properties and biodegradability of the PLA-lignocellulose composite under environmental conditions were evaluated as indicators of its potential for applications in soil. Its mechanical and structural properties were characterized by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). Results showed that the incorporation of lignocellulose waste material into PLA increased the swelling ratio of the biocomposite by up to 300%. The application of the biocomposite of 2 wt% in soil enhanced its capacity for water retention by 10%. In addition, the cross-linked structure of the material proved to be capable of swelling and deswelling repeatedly, indicating its good reusability. Incorporating lignocellulose waste in the PLA enhanced its stability in the soil environment. After 50 days of the experiment, almost 50% of the sample had degraded in the soil. [ABSTRACT FROM AUTHOR]

This study details the design and characterization of a new, biodegradable, and renewable whey/cellulose-based hydrogel (i.e., agricultural hydrogel). This was formulated from cellulose derivatives (carboxymethylcellulose (CMC) and hydroxyethylcellulose (HEC)) and acid whey cross-linked with citric acid, with the aim to obtain an agricultural product with a high swelling capacity to uphold the quality of soil and conserve water resources. With regard to the swelling behaviour of the prepared hydrogels, the authors initially assessed the swelling ratio and capacity for water uptake. Evaluating the chemical structure of the hydrogel and its thermal and viscoelastic properties involved performing Fourier transform infrared spectroscopy, differential scanning colorimetry, thermal gravimetric analysis, and rheological measurement of the hydrogel films. According to preliminary results, sufficient swelling capacity and stiffness were observed in a hydrogel prepared with 3% CMC and HEC, cross-linked with 5% citric acid. Moreover, the kinetics of water uptake revealed a promising capacity that was sustainable after 5 drying and swelling cycles. The results confirmed that the stability of the hydrogel was enhanced by the presence of the citric acid. As a consequence, it is necessary to utilize an appropriate cross-linking concentration and abide by certain conditions to ensure the swelling properties of the prepared hydrogel are sufficient. Further investigation of the topic, especially in relation to applications in soil, could confirm if the whey-cellulose-based hydrogel is actually suitable for agricultural use, thereby contributing to the advancement of sustainable arable farming. [ABSTRACT FROM AUTHOR]

Poly(3-hydroxybutyrate) is a biopolymer which is used to production of implants in the human body. On the other hand, the physical and mechanical properties of poly(3-hydroxybutyrate) are compared to the properties of isotactic polypropylene what makes poly(3-hydroxybutyrate) possible substitute for polypropylene. Unfortunately, the melting point of poly(3-hydroxybutyrate) is almost equal to its degradation temperature what gives very narrow window of its processing conditions. Therefore, numerous attempts are being made to improve the poly(3-hydroxybutyrate) properties. In the present work, hybrid nanobiocomposites based on poly(3-hydroxybutyrate) as a matrix with the use of organic nanoclay - Cloisite 30B and linear polyurethane as a second filler have been manufactured. The linear polyurethane was based on diphenylmethane 4,4'-diisocyanate and diol with imidazoquinazoline rings. The obtained nanobiocomposites were characterized by X-ray diffraction, scanning and transmission electron microscopies, thermogravimetry, differential scanning calorimetry and their selected mechanical properties were tested. The resulting hybrid nanobiocomposites have intercalated/exfoliated structure. The nanobiocomposites characterize a higher thermal stability and a wider range of processing temperatures compared to the unfilled matrix. The plasticizing influence of nanofillers was also observed. In addition, the mechanical properties of the discussed nanobiocomposites were examined and compared with those ones of the unfilled poly(3-hydroxybutyrate). The new-obtained nanobiocomposites based on poly(3-hydroxybutyrate) containing 1% Cloisite 30B and 5% by mass of the linear of polyurethane characterized the highest improvement of processing conditions. They have the biggest difference between the temperature of degradation and the onset melting temperature, about 100°C. [ABSTRACT FROM AUTHOR]

This study is focussed on micro-encapsulation of essential oils in polylactic acid (PLA) and a poly(methyl methacrylate) (PMMA) matrix as well as blends of the same. Microspheres were prepared by the solvent evaporation technique and characterised by scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and Fourier transform infra-red spectroscopy (FTIR). The encapsulation efficiencies and release profiles of the essential oils were studied by gas chromatography mass spectrometry (GC-MS) and head-space solid-phase microextraction GC-MS, respectively. Furthermore, the microspheres were tested for antibacterial activity against both Gram-negative and Gram-positive bacterial strains. The results showed that the microspheres compositions (PLA/PMMA ratio) have significant effect on their characteristics. The process adopted for preparing the microspheres promoted formation of spherical particles at the sizes of 1.5–9.5 µm. The highest encapsulation efficiency of the prepared microspheres was observed in systems consisting of linalool (81.10 ± 10.0 wt. % for PLA system and 76.0 ± 3.3 wt. % for PMMA system). Confirmation was also made that the release rate of the microspheres was affected by the size of the same. [ABSTRACT FROM AUTHOR]