Search

Purpose: To evaluate the fracture strength of endodontically treated molars filled with different composite resins with vs without fiber reinforcement. Materials and Methods: A total of 60 intact mandibular molars were selected and endodontically treated. A standardized mesio-occlusal-distal cavity was prepared with cervical margins 1 mm above the cementoenamel junction and oral and buccal walls with 1.5-mm thickness. Universal adhesive was used in all specimens in etch-and-rinse mode. Specimens were divided into four groups (n = 15 each) according to restoration technique: group CSM = adhesive overlay with hybrid ceramic; group EXP = direct restoration with short fiber-reinforced composite; group ESU = direct restoration with nanohybrid composite; and group EST = direct restoration with nanohybrid composite reinforced with horizontal bidirectional glass fibers placed over the pulpal chamber floor. After 7 days of storage in water, samples were loaded until fracture using a universal testing machine. The maximum breaking loads were recorded in Newtons, and statistical analysis was then conducted with two-way ANOVA and post hoc Tukey test. Fragments were analyzed using scanning electron microscopy. Results: Mean fracture resistance values were: CSM = 1,428.91 ± 316.90 N; EXP = 1,874.57 ± 299.47 N; ESU = 1,557.44 ± 355.65 N; and EST = 1,870.27 ± 145.11 N. The CSM and EXP groups showed the highest strength values when compared to the other groups. The variable fiber insertion did not significantly alter the fracture resistance. The origin of the fracture was always located on the occlusal surface, mainly in the major contact loading area. Conclusion: The use of fiber-reinforced composite showed great improvement in fracture resistance, similar to a cuspal coverage restoration. However, only short fiber-reinforced composites showed a favorable fracture pattern. [ABSTRACT FROM AUTHOR]

In recent years, tooth wear has been a growing concern in dentistry as it has become increasingly prevalent among the population. At the same time, the development of adhesive techniques has enabled minimally invasive treatment protocols, with the goal of preserving and protecting teeth for as long as possible. This clinical report presents the case of a full-mouth rehabilitation patient with tooth wear who was treated using minimally invasive techniques. Esthetic and functional outcomes were designed and monitored using digital tools such as digital impressions, 3D facial scans, a digital tooth library, transcutaneous electrical nerve stimulation (TENS), M RI and kinesiographic (KS) analysis throughout the treatment. To increase the vertical dimension of occlusion, instead of using traditional centric relation (CR) methods, a myocentric relation (MCR) technique was employed. This approach allowed the clinician to maintain the occlusal Class i situation, avoiding more invasive orthodontic treatment or maxillofacial surgery and resulting in reduced morbidity, treatment time, and cost for the patient. At the 1-year follow-up, good patient adaptation was shown, suggesting that the MCR concept is a viable alternative to conventional CR methods in appropriate cases. (int J Esthet Dent 2024;19:74-90) [ABSTRACT FROM AUTHOR]

Objectives: To review the dynamic analytical elements used in the functional assessment of the stomatognathic system, summarize the available scientific evidence, and consider interrelations with body posture and cognition. Method and materials: A thorough literature search was conducted using PubMed, the Cochrane Library database, and Google Scholar. Peer-reviewed articles and literature reviews provided up-to-date information addressing three topics: (a) the available knowledge and recent evidence on the relationship between the morphologic aspects of dental/craniofacial anatomy and oral function/dysfunction, (b) mandibular dynamics, considering mobility, functional activity, and existing methodologies of analysis, and (c) a possible correlation between the stomatognathic system, body posture, and cognition. Results: Modern dentistry may be regarded as a human adaptation strategy, helping to conserve healthy teeth for much longer without risking overall health. It is futile to treat patients using a mechanistic, sectorial approach that misrepresents patient behavior and requests, just as it is to affirm the absence of any structure-function relationships. However, it is also evident that there is a lack of general consensus on the precise functional assessment of the stomatognathic system, mostly due to the methodologic heterogeneity employed and the high risk of bias. Despite the abundant evidence produced with the aim of providing solid arguments to define dynamic models of functional assessment of the stomatognathic system, it is yet to become highly empirical, based as it is on operator experience in daily clinical practice. Conclusions: Further efforts from the scientific and clinical community, with the help of progress in technology, remain should this gap be filled and should substantial data on differences between pathologic and physiologic dynamic models of function be provided. Dentistry needs to employ - on a larger scale - objective, dynamic methods of analysis for the functional evaluation of the stomatognathic system, embracing concepts of "personalized medicine" and "interprofessional collaborations". [ABSTRACT FROM AUTHOR]

Objectives: To review the elements of static analysis in the functional assessment of the stomatognathic system, as promoted for more than a century by gnathologists, and summarize the available scientific evidence, including anthropologic observations. Method and materials: A thorough search was conducted using PubMed, the Cochrane Library database, and Google Scholar. From peer-reviewed articles and other scientific literature, up-to-date information addressing three topics was identified: (a) the anthropologic perspective with particular consideration for the role of progressive dental wear over time, (b) descriptions of gnathologic principles and evidence on their scientific validity, and (c) the methodologic inaccuracies introduced by seeking to correlate variables directly rather than allowing for causal inference. Results: For decades gnathology attempted to describe a structure-function correlation within the stomatognathic system by means of a model whose principles were static and mechanistic references. No scientific validation was ever achieved, placing clinical and research consensus out of reach. Conclusions: A historical perspective helps to place the fundamentals of gnathology into context: They were conceived to solve technical difficulties but were then assumed to be physiologic stereotypes. This misconception led to a decades-long promotion of mechanistic theories to describe oral function, but the evidence available today supports a more flexible and adaptable approach. Gnathologic arguments have been relegated to become exclusively of technical relevance in oral rehabilitation. [ABSTRACT FROM AUTHOR]

The incidence of tooth wear has steadily increased in all Western populations during the past decades. A through-care strategy, extendable for a lifetime, has become crucial to prevent the extensive loss of sound dental structure and to make an eventual retreatment affordable in the long term. An interceptive treatment using resin composite materials and no-preparation approaches meets these requirements. Moreover, continual developments in digital dentistry makes possible to predict the treatment plan for the restorative rehabilitation of the mouth. The availability of digital resources allows clinicians to increase predictability for excellent esthetics and good functional results. This article provides a step-by-step description of a full-mouth additive rehabilitation achieved by employing digital workflows and direct resin composite restorations. A comprehensive functional and esthetic evaluation of the treatment is proposed and discussed. [ABSTRACT FROM AUTHOR]

A modern approach to treating tooth wear aims to stop its progression at an eariy stage and, ideally, to install effective preventive measures or, in cases when it is already late, to intervene using an interceptive treatment approach. It is important to avoid the need for a full prosthetic treatment that implies additional tooth substance removal, with potential biologic complications. As signs of tooth wear often appear in young individuals, an interceptive treatment has the great potential of stabilizing tooth wear progression early using a no-prep approach and composite resins. The additional benefit of this treatment approach is its affordability and maintainability in the light of tooth wear being, usually, a lifelong pathology. Among the various options for restoring tooth wear lesions with composite resins, interest has lately been increasing for molding techniques (single or full) due to their efficiency and simplicity. This article describes modifications of the basic full molding technique to alleviate most of the known shortcomings of this method; namely, the index deformation, the time-consuming removal of excesses in the proximal and contact areas, and the possible insufficient precision in the molding of the occlusal anatomy. The 1- and 3-year follow-ups of both cases presented here confirmed the functional and esthetic quality of the results obtained with this technique. A kinesiographic and 3D superimposition of the posttreatment and 1-year results of one case provided additional perspectives on this treatment method. (Int J Esthet Dent 2020;15:264-286) [ABSTRACT FROM AUTHOR]

The proliferation of digital technology is progressively changing dentistry. Thanks to continual improvements in CAD/CAM devices and dental materials, it is possible nowadays to carry out a treatment plan for oral rehabilitations with fully digital approaches and noninvasive concepts. The availability of digital resources allows clinicians to increase the predictability of enhanced esthetics and good functional results. There is an increasing number of patients today who are affected by excessive tooth wear and may benefit from these kinds of treatments. This article provides a step-by-step documentation of a full-mouth rehabilitation performed with a digital approach and additive CAD/ CAM composite resin restorations. An innovative functional evaluation is also documented and discussed. The initial situation was assessed and compared with the rehabilitation project through a snap-on device. After the intraoral adjustment and validation, the final rehabilitation was performed according to the information obtained in the provisional phase and digitally transmitted to the laboratory. (Int J Esthet Dent 2020;15:242-262) [ABSTRACT FROM AUTHOR]

Since the first introduction of the Cerec system (Sirona) in the early 1980s, the use of computer-aided design/computer-aided manufacture (CAD/CAM) technology has spread widely in modern adhesive dentistry. Thanks to this innovative technology, it has been possible to carry out chairside restorations fully managed by the clinician, with the advantages of lower costs for the patient, more rapid execution of the restorations, and the exclusion of the provisional phase. With further improvements in chairside technologies and materials, specifically in the field of composite resin blocks, it is now possible to fabricate multiple ultrathin, minimally invasive or even noninvasive restorations in one single appointment. The clinical case presented here was solved using an innovative approach: It was entirely studied and realized chairside by a dentist on a computer, without any plaster cast or classic articulator. Vertical dimension of occlusion (VDO) augmentation was projected with the 'Incisal Tip' tool on the virtual articulator of the Cerec system. Eight composite resin overlays were designed on the non-prepared posterior teeth of a patient suffering from generalized tooth loss principally caused by a history of bulimia nervosa. The maxillary anterior teeth were restored with six palatal veneers modified with direct composites from the vestibular side, in order to improve the esthetic integration of the restorations. The mandibular posterior teeth were built up with direct composites. (Int J Esthet Dent 2018; 13:50-64) [ABSTRACT FROM AUTHOR]

This study evaluated the effectiveness of chemical-based adhesive techniques on promoting immediate and aged bond strength between zirconia and luting cement. A total of 128 discs of zirconia were divided into 4 groups (n = 32) according to the adhesive treatment: tribochemical silica-coating followed by silane (Silane Primer, Kerr) and bonding (Optibond FL, Kerr), Signum Zirconia Bond (Hereaus), Z-Prime Plus (Bisco), and All-Bond Universal (Bisco). Composite cylinders were cemented on the zirconia sample with Duo-Link Universal (Bisco). Eight specimens per group were subjected to 10,000 thermocycles and subsequently bond strength was tested with shear-bond strength test. ANOVA test showed that artificial aging significantly affected the bond strength to zirconia. Bonferroni test highlighted a significant influence of adhesive treatment (Signum) on bond strength after thermocycling. It was concluded that 10-MDP-based bonding systems showed no improvement in initial bond strength compared with tribochemical treatment. All chemical bonding techniques tested in this study were influenced by thermocycling. [ABSTRACT FROM AUTHOR]

Aim: The aim of the present study was to demonstrate that fully digital workflows can provide predictable esthetic and functional outcomes., Materials and Methods: The present clinical case report provides a step-by-step documentation of a full-mouth rehabilitation planned and performed with a fully digital approach utilizing an adhesive and no-prep method. After assessing the patient's needs, a treatment plan was established that considered the patient's functional and esthetic requests. The overlap of 2D images and 3D models and facial scans of the patient allowed the digital previsualization of the esthetic result by implementing the "copy-paste" approach to restore the maxillary anterior sextant., Conclusion: The final outcome was satisfactory in terms of esthetics, function, and soft tissue health.

Objectives: To review the dynamic analytical elements used in the functional assessment of the stomatognathic system, summarize the available scientific evidence, and consider interrelations with body posture and cognition., Method and Materials: A thorough literature search was conducted using PubMed, the Cochrane Library database, and Google Scholar. Peer-reviewed articles and literature reviews provided up-to-date information addressing three topics: (a) the available knowledge and recent evidence on the relationship between the morphologic aspects of dental/craniofacial anatomy and oral function/dysfunction, (b) mandibular dynamics, considering mobility, functional activity, and existing methodologies of analysis, and (c) a possible correlation between the stomatognathic system, body posture, and cognition., Results: Modern dentistry may be regarded as a human adaptation strategy, helping to conserve healthy teeth for much longer without risking overall health. It is futile to treat patients using a mechanistic, sectorial approach that misrepresents patient behavior and requests, just as it is to affirm the absence of any structure-function relationships. However, it is also evident that there is a lack of general consensus on the precise functional assessment of the stomatognathic system, mostly due to the methodologic heterogeneity employed and the high risk of bias. Despite the abundant evidence produced with the aim of providing solid arguments to define dynamic models of functional assessment of the stomatognathic system, it is yet to become highly empirical, based as it is on operator experience in daily clinical practice., Conclusions: Further efforts from the scientific and clinical community, with the help of progress in technology, remain should this gap be filled and should substantial data on differences between pathologic and physiologic dynamic models of function be provided. Dentistry needs to employ - on a larger scale - objective, dynamic methods of analysis for the functional evaluation of the stomatognathic system, embracing concepts of "personalized medicine" and "interprofessional collaborations."

Purpose To explore fracture strength and failure behaviour of minimally invasive CAD-CAM composite resin overlay restorations.Methods Eighty bi- and tri-layer cylindrical overlay model including the restoration bonded over bovine tooth dentin (Groups D) and enamel-dentin (Groups E) were assembled (diameter 9 mm). Restorations were milled from CAD-CAM composite resin blocks (Brilliant Crios, Coltène/Whaledent AG) in different thicknesses (0.5mm, 1mm, 1.5mm, 2mm) and equally distributed in four Groups D and four Groups E (n=10). All specimens were submitted to an Hertzian load-to-failure contact test with spherical indenter. Critical loads were recorded in Newton and data were analysed using Kruskal-Wallis test for multiple and Mann-Whitney test for 2-samples comparisons (p < 0.05). Fragments were examined using SEM. The stress distribution for specimens with restorations of 0.5 mm and 2 mm was also investigated with FEA.Results For all specimens, the mean static loads in Newton increased with an increase in restoration thickness. On contrary, restorations with the same thickness displayed higher resistance values when bonded over enamel than dentin, except for the 2-mm thick restorations. A damage competition was detected between cone/median cracks originating at the loading contact area of the restorations and radial cracks beginning at their inner surface, with the former prevailing in restorations bonded on enamel and the latter being dominant for restorations bonded on dentin.Conclusions For bonded ultra-thin resin composite restorations (0.5 mm to 1.5 mm) enamel as bonding substrate assures higher critical loads to fracture than dentin. This influence gradually decreases as restoration thickened.

Since the first introduction of the Cerec system (Sirona) in the early 1980s, the use of computer-aided design/computer-aided manufacture (CAD/CAM) technology has spread widely in modern adhesive dentistry. Thanks to this innovative technology, it has been possible to carry out chairside restorations fully managed by the clinician, with the advantages of lower costs for the patient, more rapid execution of the restorations, and the exclusion of the provisional phase. With further improvements in chairside technologies and materials, specifically in the field of composite resin blocks, it is now possible to fabricate multiple ultrathin, minimally invasive or even noninvasive restorations in one single appointment. The clinical case presented here was solved using an innovative approach: It was entirely studied and realized chairside by a dentist on a computer, without any plaster cast or classic articulator. Vertical dimension of occlusion (VDO) augmentation was projected with the 'Incisal Tip' tool on the virtual articulator of the Cerec system. Eight composite resin overlays were designed on the non-prepared posterior teeth of a patient suffering from generalized tooth loss principally caused by a history of bulimia nervosa. The maxillary anterior teeth were restored with six palatal veneers modified with direct composites from the vestibular side, in order to improve the esthetic integration of the restorations. The mandibular posterior teeth were built up with direct composites.

The last few decades have seen an upward trend of the pathologies of abrasion, erosion, and abfraction. These pathologies, especially in combination, can provoke a significant loss of tooth substance. Nowadays, modern digital chairside technologies and new restorative materials allow clinicians to restore the lost tooth structure with a minimally invasive and fully digital approach. This article describes a step-by-step procedure of a full-mouth rehabilitation performed with a total digital chairside approach in several appointments.

Objectives: The study evaluated the fracture resistance and fracture patterns of endodontically treated mandibular first molars restored with glass-fiber-reinforced direct composite restorations., Methods: In total, 60 extracted intact first molars were treated endodontically; a mesio-occluso-distal (MOD) cavity was prepared and specimens were then divided into six groups: sound teeth (G1), no restoration (G2), direct composite restoration (G3), fiber-post-supported direct composite restoration (G4), direct composite reinforced with horizontal mesio-distal glass-fibers (G5), and buccal-palatal glass-fibers (G6). Specimens were subjected to 5000 thermocycles and 20,000 cycles of 45° oblique loading force at 1.3Hz and 50N; they were then loaded until fracture. The maximum fracture loads were recorded in Newtons (N) and data were analyzed with one-way ANOVA and post-hoc Tukey tests (p<0.05). Fractured specimens were analyzed with a scanning electron microscope (SEM)., Results: The mean static loads (in Newtons) were: G1, 831.83; G2, 282.86; G3, 364.18; G4, 502.93; G5, 499.26; and G6, 582.22. Fracture resistance did not differ among G4, G5, and G6, but was significantly higher than G3 (p=0.001). All specimens fractured in a catastrophic way. In G6, glass fibers inducted a partial deflection of the fracture, although they were not able to stop crack propagation., Conclusions: For the direct restoration of endodontically treated molars, reinforcement of composite resins with glass-fibers or fiber posts can enhance fracture resistance. The SEM analysis showed a low ability of horizontal glass-fibers to deviate the fracture, but this effect was not sufficient to lead to more favorable fracture patterns above the cement-enamel junction (CEJ)., Clinical Significance: The fracture resistance of endodontically treated molars restored with direct composite restorations seems to be increased by reinforcement with fibers, even if it is insufficient to restore sound molar fracture resistance and cannot avoid vertical fractures., (Copyright © 2016 Elsevier Ltd. All rights reserved.)