Search

This work presents a resistive random access memory (RRAM)-bias current-starved ring oscillator (CSRO) as true random number generator (TRNG), where the cycle-to-cycle variability of an RRAM device is exploited as source of randomness. A simple voltage divider composed of this RRAM and a resistor is considered to bias the gate terminal of the extra transistor of every current starved (CS) inverter of the ring oscillator (RO). In this way, the delay of the inverters is modified, deriving an unpredictable oscillation frequency every time the RRAM switches to the high resistance state (HRS). The oscillation frequency is finally leveraged to extract the sequence of random bits. The design is simple and adds low area overhead. Experimental measurements are performed to analyze the cycle-to-cycle variability in the HRS. The very same measurements are subsequently used to validate the TRNG by means of electrical simulations. The obtained results passed all the National Institute of Standards and Technology randomness tests (NIST) tests without the need for postprocessing.

Test power requirements for complex components are becoming stringent. The purpose of this paper is to reuse a recently proposed RT (Register Transfer) Level test preparation methodology to drive innovative Low-Energy (LE)/Low-Power (LP) BIST solutions for digital SoC (System on a Chip) embedded cores. RTL test generation is carried out through the definition of a reduced set of partially specified input vectors (masks), leading to a high correlation between multiple detection of RTL faults and single detection of likely physical defects. The methodology is referred as masked-based BIST, or m-BIST. BIST quality is evaluated considering three attributes: test effectiveness (TE), test length (TL) and test power (TP). LE BIST sessions are defined as short test sequences leading to high values of RT-level IFMB metrics and low-level Defects Coverage (DC). The energy and power of the BIST sessions, with and without mask forcing, is computed. It is shown that, by forcing vectors with the RTL masks, short BIST sessions, with low energy and with a comparable (or smaller) average power consumption, as compared to pseudo-random test, are derived. The usefulness of the methodology is ascertained using the VeriDOS simulation environment and modules of the CMUDSP and TORCH ITC'99 benchmark circuits. [ABSTRACT FROM AUTHOR]