Search

Prebiotic chemistry one-pot reactions, such as HCN-derived polymerizations, have been used as stimulating starting points for the generation of new multifunctional materials due to the simplicity of the processes, use of water as solvent, and moderate thermal conditions. Slight experimental variations in this special kind of polymerization tune the final properties of the products. Thus, herein, the influence of NH4Cl on the polymerization kinetics of cyanide under hydrothermal conditions and on the macrostructures and properties of this complex system is explored. The kinetics of the process is consistent with an autocatalytic model, but important variations in the polymerization reaction are observed according to a simple empirical model based on a Hill equation. The differences in the kinetic behaviour against NH4Cl were also revealed when the structural, morphological, thermal, electronic and magnetic properties of the synthesized cyanide polymers were compared, and these properties were evaluated by elemental analysis, FTIR, XPS, UV-vis, and ESR spectroscopies, X-ray diffraction, SEM and thermoanalytical techniques. As a result, this hydrothermal prebiotic polymerization is not only pH dependent, as previously thought, but also ammonium subservient. From this result, a hypothetical reaction mechanism was proposed, which involves the active participation of ammonium cations via formamidine and serves as a remarkable point against previous reports. The results discussed here expand the knowledge on HCN wet chemistry, offer an extended view of the relevant parameters during the simulation of hydrothermal scenarios and describe the production of promising paramagnetic and semiconducting materials inspired by prebiotic chemistry. [ABSTRACT FROM AUTHOR]

Aminomalononitrile (AMN), the HCN formal trimer, is a molecule of interest in prebiotic chemistry, in fine organic synthesis, and, currently, in materials science, mainly for bio-applications. Herein, differential scanning calorimetry (DSC) measurements by means of non-isothermal experiments of the stable AMN p-toluenesulfonate salt (AMNS) showed successful bulk AMN polymerization. The results indicated that this thermally stimulated polymerization is initiated at relatively low temperatures, and an autocatalytic kinetic model can be used to appropriately describe, determining the kinetic triplet, including the activation energy, the pre-exponential factor, and the mechanism function (Eα, A and f(α)). A preliminary structural characterization, by means of Fourier transform infrared (FTIR) spectroscopy, supported the effective generation of HCN-derived polymers prepared from AMNS. This study demonstrated the autocatalytic, highly efficient, and straightforward character of AMN polymerization, and to the best of our knowledge, it describes, for the first time, a systematic and extended kinetic analysis for gaining mechanistic insights into this process. The latter was accomplished through the help of simultaneous thermogravimetry (TG)-DSC and the in situ mass spectrometry (MS) technique for investigating the gas products generated during these polymerizations. These analyses revealed that dehydrocyanation and deamination processes must be important elimination reactions involved in the complex AMN polymerization mechanism. [ABSTRACT FROM AUTHOR]

For the first time, chemometrics was applied to the recently reported microwave-driven cyanide polymerization. Fast, easy, robust, low-cost, and green-solvent processes are characteristic of these types of reactions. These economic and environmental benefits, originally inspired by the constraints imposed by plausible prebiotic synthetic conditions, have taken advantage of the development of a new generation of HCN-derived multifunctional materials. HCN-derived polymers present tunable properties by temperature and reaction time. However, the apparently random behavior observed in the evolution of cyanide polymerizations, assisted by microwave radiation over time at different temperatures, leads us to study this highly complex system using multivariate analytical tools to have a proper view of the system. Two components are sufficient to explain between 84 and 98% of the total variance in the data in all principal component analyses. In addition, two components explain more than 91% of the total variance in the data in the case of principal component analysis for categorical data. These consistent statistical results indicate that microwave-driven polymerization is a more robust process than conventional thermal syntheses but also that plausible prebiotic chemistry in alkaline subaerial environments could be more complex than in the aerial part of these systems, presenting a clear example of the "messy chemistry" approach of interest in the research about the origins of life. In addition, the methodology discussed herein could be useful for the data analysis of extraterrestrial samples and for the design of soft materials, in a feedback view between prebiotic chemistry and materials science. [ABSTRACT FROM AUTHOR]

The polymers based on diaminomaleonitrile (DAMN polymers) are a special group within an extensive set of complex substances, namely HCN polymers (DAMN is the formal tetramer of the HCN), which currently present a growing interest in materials science. Recently, the thermal polymerizability of DAMN has been reported, both in an aqueous medium and in bulk, offering the potential for the development of capacitors and biosensors, respectively. In the present work, the polymerization of this plausible prebiotic molecule has been hydrothermally explored using microwave radiation (MWR) via the heating of aqueous DAMN suspensions at 170–190 °C. In this way, polymeric submicron particles derived from DAMN were obtained for the first time. The structural, thermal decomposition, and electrochemical properties were also deeply evaluated. The redox behavior was characterized from DMSO solutions of these highly conjugated macromolecular systems and their potential as semiconductors was described. As a result, new semiconducting polymeric submicron particles were synthetized using a very fast, easy, highly robust, and green-solvent process. These results show a new example of the great potential of the polymerization assisted by MWR associated with the HCN-derived polymers, which has a dual interest both in chemical evolution and as functional materials. [ABSTRACT FROM AUTHOR]

HCN polymers are a group of complex and heterogeneous substances that are widely known in the fields of astrobiology and prebiotic chemistry. In addition, they have recently received considerable attention as potential functional material coatings. However, the real nature and pathways of formation of HCN polymers remain open questions. It is well established that the tuning of macromolecular structures determines the properties and practical applications of a polymeric material. Herein, different synthetic conditions were explored for the production of HCN polymers from NH4CN or diaminomaleonitrile in aqueous media with different concentrations of the starting reactants and several reaction times. By using a systematic methodology, both series of polymers were shown to exhibit similar, but not identical, spectroscopic and thermal fingerprints, which resulted in a clear differentiation of their morphological and electrochemical properties. New macrostructures are proposed for HCN polymers, and promising insights are discussed for prebiotic chemistry and materials science on the basis of the experimental results. [ABSTRACT FROM AUTHOR]

The Atacama Desert, the oldest and driest desert on Earth, displays significant rains only once per decade. To investigate how microbial communities take advantage of these sporadic wet events, we carried out a geomicrobiological study a few days after a heavy rain event in 2015. Different physicochemical and microbial community analyses were conducted on samples collected from playas and an alluvial fan from surface, 10, 20, 50, and 80 cm depth. Gravimetric moisture content peaks were measured in 10 and 20 cm depth samples (from 1.65 to 4.1% w/w maximum values) while, in general, main anions such as chloride, nitrate, and sulfate concentrations increased with depth, with maximum values of 13–1,125; 168–10,109; and 9,904–30,952 ppm, respectively. Small organic anions such as formate and acetate had maximum concentrations from 2.61 to 3.44 ppm and 6.73 to 28.75 ppm, respectively. Microbial diversity inferred from DNA analysis showed Actinobacteria and Alphaproteobacteria as the most abundant and widespread bacterial taxa among the samples, followed by Chloroflexi and Firmicutes at specific sites. Archaea were mainly dominated by Nitrososphaerales, Methanobacteria, with the detection of other groups such as Halobacteria. Metaproteomics showed a high and even distribution of proteins involved in primary metabolic processes such as energy production and biosynthetic pathways, and a limited but remarkable presence of proteins related to resistance to environmental stressors such as radiation, oxidation, or desiccation. The results indicated that extra humidity in the system allows the microbial community to repair, and prepare for the upcoming hyperarid period. Additionally, it supplies biomarkers to the medium whose preservation potential could be high under strong desiccation conditions and relevant for planetary exploration. [ABSTRACT FROM AUTHOR]

The kinetics of the reaction of the synthesis of HCN polymers in aqueous medium at high temperatures have been analysed to ascertain a suitable model for this material, for which it was recently demonstrated that prebiotic chemistry may now be adapted in the development of a new generation of high performance coatings and adhesives with biomedical applications. These experimental conditions were chosen for the simplicity of the reagents, being particularly convenient in regard to potential industrial scale-up of coating technology, where these polymers have revealed an interesting field of application. The kinetics of the precipitation polymerization of HCN in water were studied under isothermal conditions at four different temperatures between 75 °C and 90 °C throughout gravimetric measurements. The use of the Kamal–Sourour autocatalytic kinetic model was proposed, properly describing the overall formation process of this insoluble HCN polymer. All of the kinetic parameters, including reaction orders, kinetic constants and activation energy, were determined for the cross-linking polymerization reaction under study, and a relevant autocatalysis effect was observed. An isoconversion method was also used to analyse the variation of the global activation energy with conversion; and characterization by means of elemental analysis, Fourier transform infrared (FTIR) spectroscopy, and scanning electron microscopy (SEM) was carried out. This study demonstrates the autocatalytic, robust and straightforward character of this heterogeneous aqueous HCN polymerization, and to the best of our knowledge, this report describes the first time that a systematic and extended kinetic analysis has been conducted to obtain a more comprehensive and deeper understanding of this complex reaction, which is of great interest to the origin of life and, currently, to materials science. [ABSTRACT FROM AUTHOR]

• Thermal degradation properties of DAMN polymers were revealed by simultaneous TG-DSC-MS analysis. • Kinetics for the synthesis of DAMN polymers has been studied by DSC. • This work has demonstrated the air and oxygen tolerance of bulk DAMN polymerization. • Three-step Šesták-Berggren model successfully describes DAMN thermal polymerization. The impact of air on the bulk polymerization kinetics of diaminomaleonitrile (DAMN), tetramer of HCN, and thermal degradation properties of this resulting conjugated C=N polymeric system is investigated under different temperature regimes and environments. This study shows the effect of exposure to air and oxygen, time, temperature, and evolved gases during DAMN polymerization reactions, which can be suitably monitored by differential scanning calorimetry (DSC) through both dynamic and isothermal measurements. Thus, low heating rates and isothermal scans at 150-170 °C allow us to describe the solid-state polymerization (SSP) of DAMN, and those experiments at 190, 195 and 200 °C and higher heating runs define its melt polymerization (MP) behaviour. Both processes are highly efficient, possibly due to the self-acceleration nature of their kinetics, which is consistent with a three-step Šesták-Berggren (SB) model. The oxygen effect was analysed to determine their tolerance to this variable and confirm the nonradical nature of the mechanism under study. In addition, a detailed thermal characterization by simultaneous DSC/thermogravimetry coupled to mass spectrometry (TG-MS) of these singular polymeric systems obtained under air atmosphere has been completed, and the improvement of the thermal stability of those samples prepared by an SSP at lower temperature was confirmed. The present work offers lower-cost and simpler synthetic methods to obtain this novel class of promising multifunctional polymeric materials through highly efficient and very fast processes. [Display omitted] [ABSTRACT FROM AUTHOR]

The origin of life is one of the fundamental questions in science. Eschenmoser proposed the 'glyoxylate scenario', in which plausible abiotic synthesis pathways were suggested to be compatible with the constraints of prebiotic chemistry. In this proposal, the stem compound is HCN. In this work, we explore the 'glyoxylate scenario' through several syntheses of HCN polymers, paying particular attention to the role of the aqueous aerosols, together with statistical methods, as a step to elucidate the synthetic problem of the origin of life. The soluble and insoluble HCN polymers synthetized were analyzed by GC-MS. We identified, for the first time, glyoxylic acid in these polymers, together with some constituents of the reductive tricarboxylic acid cycle, amino acids and several N-heterocycles. The findings presented herein, as the first global approach to the 'glyoxylate scenario', give full effect to this hypothesis and prove that aqueous aerosols could play an important role in this plausible scene of the origin of life. [ABSTRACT FROM AUTHOR]

The genesis of life on Earth is a hypothesis of evolutionary science that can be, at least partially, tested experimentally. The prebiotic synthesis of cofactors or coenzymes is a poorly explored issue, likely because their formation under plausible prebiotic conditions is not clear. In this sense, it has been proposed that the cofactors are 'molecular fossils' of an early phase of life. In contrast, Eschenmoser and Loewenthal suggested a prebiotic hydrocyanic origin of cofactor building blocks. In the present paper, the formation of a set of pterins from cyanide polymerizations is demonstrated, showing that the main structure of some cofactors can be prebiotically formed. Indeed, it was observed that aqueous aerosols additionally increase the relative composition for pterins in the insoluble NH4CN polymers synthesized. The novel identification of pterins in NH4CN polymers, together with the previous detection of other important biomonomers, indicates that cyanide polymerizations were essential in the early state of prebiotic chemistry. [ABSTRACT FROM AUTHOR]

In order to further investigate the thermal characterization of hydrogen cyanide polymers, in this study we focus on the thermogravimetry (TG) of three polymer samples obtained from different synthetic routes. The first one was synthesized from an aqueous solution of equimolar amounts of sodium cyanide (NH 4 Cl) and ammonium chloride (NaCN). The second one was produced from the polymerization of HCN gas in water, HCN being obtained from the reaction of NH 3 , CH 4 and air over a platinum catalyst at 1100 °C; and the last sample was synthesized from anhydrous HCN, produced by the action of sulfuric acid on sodium cyanide. Differential thermal analysis (DTA), differential scanning calorimetry (DSC) and a coupled TG-mass spectrometer (MS) were used to evaluate the thermal behavior of these black polymers, which are of significant interest in prebiotic chemistry but also in extraterrestrial chemistry. All the samples present a similar thermal behavior. Following a dehydration process, three pyrolysis stages are observed, which occur over the temperature ranges of 150–300 °C, 300–550 °C and above 550 °C. However, we observe that the char-forming reactions at higher temperatures, in the carbonization stage, is strongly dependent on the HCN polymer sample and the presence or absence of oxygen. During each stage, the same volatilization processes take place regardless of the type of HCN polymer sample. Deamination and dehydration reactions dominate in the low temperature range while thermal depolymerization, releasing HCN, and a denitrogenation process occur mainly at elevated temperatures. The release of isocyanic acid (or cyanic acid) and formamide are also identified within a wide range of temperatures. We discuss and interpret the thermal decomposition behavior to be related to the polymerization mechanisms in accordance with recent studies. We outline that the thermal profiles could be a good fingerprint of this complex macromolecular prebiotic material, whose structure still remains uncertain, despite of their intensive studies over the last fifty years. [ABSTRACT FROM AUTHOR]

We study the bias induced by a weak (200 mT) external magnetic field on the preferred handedness of sodium chlorate crystals obtained by slow evaporation at ambient conditions of its saturated saline solution with 20 ppm of added racemic (DL) hydrophobic amino acids. By applying the Fisher test to pairs of experiments with opposing magnetic field orientation we conclude, with a confidence level of 99.7%, that at the water-air interface of this saline solution there is an enantioselective magnetic interaction that acts upon racemic mixtures of hydrophobic chiral amino acids. This interaction has been observed with the three tested racemic hydrophobic amino acids: DL-Phe, DL-Try and DL-Trp, at ambient conditions and in spite of the ubiquitous chiral organic contamination. This enantioselective magnetic dependence is not observed when there is only one handedness of added chiral amino-acid, if the added amino acid is not chiral or if there is no additive. This effect has been confirmed with a double blind test. This novel experimental observation may have implications for our view of plausible initial prebiotic scenarios and of the roles of the geomagnetic field in homochirality in the biosphere. [ABSTRACT FROM AUTHOR]

Abstract: Hydrogen cyanide (HCN) is a ubiquitous molecule in the Universe. It is a compound that is easily produced in significant yields in prebiotic simulation experiments using a reducing atmosphere. HCN can spontaneously polymerise under a wide set of experimental conditions. It has even been proposed that HCN polymers could be present in objects such as asteroids, moons, planets and, in particular, comets. Moreover, it has been suggested that these polymers could play an important role in the origin of life. In this review, the simple organics and biomonomers that have been detected in HCN polymers, the analytical techniques and procedures that have been used to detect and characterise these molecules and an exhaustive classification of the experimental/environmental conditions that favour the formation of HCN polymers are summarised. Nucleobases, amino acids, carboxylic acids, cofactor derivatives and other compounds have been identified in HCN polymers. The great molecular diversity found in HCN polymers encourages their placement at the central core of a plausible protobiological system. [ABSTRACT FROM AUTHOR]

This study presents the thermogravimetry (TG) of hydrophobic tholins, obtained from different simulation experiments of prebiotic synthesis carried out in a CH/N/H atmosphere with spark discharge activation of aqueous aerosols and liquid water. Differential thermal analysis and differential scanning calorimetry were also used to evaluate the thermal behaviour of these complex organic compounds that could play an important role in prebiotic chemistry. A coupled thermogravimetry-mass spectrometry system allowed us to analyse the principal volatile thermal decomposition and fragmentation products of the hydrophobic tholins under dynamic conditions and an inert atmosphere. During their thermal degradation, which occurs in two stages, a wide variety of hydrocarbon products including methane, vinyl monomers (such as ethylene and propylene), acetylene, oligomers, and some other unknown compounds are found. Besides, a thermally stable structure is present (graphitic structure) in these particular organic substances. Finally, data collected from TG experiments in an oxidative atmosphere showed significant differences at temperatures above 240 °C. According to these results, the different techniques of thermal analysis here applied have proved to be an adequate methodology for the study and characterization of these complex systems, structures of which remain controversial even in these days. [ABSTRACT FROM AUTHOR]

Abstract: Two different simulation experiments of prebiotic synthesis were carried out in a CH4/N2/H2 atmosphere with spark discharge activation of aqueous aerosols and liquid water. In both cases, a hydrophilic tholin and a hydrophobic tholin were obtained. The methodology developed by our group for the characterisation of hydrophilic tholins [Ruiz-Bermejo, M., Menor-Salván, C., Mateo-Martí, E., Osuna-Esteban, S., Martín-Gago, J.A., Veintemillas-Verdaguer, S., 2008. Icarus 198, 232–241] was used in order to study the hydrophobic tholins. The gas precursors of the tholins from mixtures containing CH4, with and without H2, were studied. We propose that the formation of the hydrophobic tholins involves the formation of unsaturated oligomeric hydrocarbon chains from vinyl and acetylene monomers, as well as allene derivatives formed in the gas phase after the incorporation of polar groups into these hydrocarbon chains. Finally, we compare our results concerning hydrophobic tholins with HCN polymers, since it is generally suggested that the polymeric material formed in spark experiments are possible oligomers of HCN, and that Titan’s tholins could be poly-HCN. [Copyright &y& Elsevier]

A systematic study is presented to explore the NH4CN polymerization induced by microwave (MW) radiation, keeping in mind the recent growing interest in these polymers in material science. Thus, a first approach through two series, varying the reaction times and the temperatures between 130 and 205 °C, was conducted. As a relevant outcome, using particular reaction conditions, polymer conversions similar to those obtained by means of conventional thermal methods were achieved, with the advantage of a very significant reduction of the reaction times. The structural properties of the end products were evaluated using compositional data, spectroscopic measurements, simultaneous thermal analysis (STA), X-ray diffraction (XRD), and scanning electron microscopy (SEM). As a result, based on the principal component analysis (PCA) from the main experimental results collected, practically only the crystallographic features and the morphologies in the nanoscale were affected by the MW-driven polymerization conditions with respect to those obtained by classical syntheses. Therefore, MW radiation allows us to tune the morphology, size and shape of the particles from the bidimensional C=N networks which are characteristic of the NH4CN polymers by an easy, fast, low-cost and green-solvent production. These new insights make these macromolecular systems attractive for exploration in current soft-matter science. [ABSTRACT FROM AUTHOR]

Abstract: Tholins are complex organic materials produced by irradiation of several carbon and nitrogen rich atmospheres. They could have played a key role in the origin of life on Earth because their ability to release important bioorganics, which are nowadays present in proteins, nucleic-acid bases and other important biostructures. Usually, the yield of these compounds is higher after acid hydrolysis, however little is known about the structure and chemical composition of the tholins. In this work, we propose the use of different spectroscopic and separation techniques, which are not usually applied in this field, in order to obtain complete information about the tholin structure and behavior. Two different simulation experiments of prebiotic synthesis were carried out in CH4/N2/H2 atmosphere out from spark discharge activation of aqueous aerosols and liquid water, respectively. In both cases, a hydrophilic tholin and a hydrophobic tholin were obtained. Herein, we report the application of this methodology to our hydrophilic tholins and we review, briefly, some astrobiological aspects related to these complex substances. [Copyright &y& Elsevier]

Hydrogen cyanide, HCN, is considered a fundamental molecule in chemical evolution. The named HCN polymers have been suggested as precursors of important bioorganics. Some novel researches have focused on the role of mineral surfaces in the hydrolysis and/or polymerization of cyanide species, but until now, their role has been unclear. Understanding the role of minerals in chemical evolution processes is crucial because minerals undoubtedly interacted with the organic molecules formed on the early Earth by different process. Therefore, we simulated the probable interactions between HCN and a serpentinite-hosted alkaline hydrothermal system. We studied the effect of serpentinite during the thermolysis of HCN at basic conditions (i.e., HCN 0.15 M, 50 h, 100 °C, pH > 10). The HCN-derived thermal polymer and supernatant formed after treatment were analyzed by several complementary analytical techniques. The results obtained suggest that: (I) the mineral surfaces can act as mediators in the mechanisms of organic molecule production such as the polymerization of HCN; (II) the thermal and physicochemical properties of the HCN polymer produced are affected by the presence of the mineral surface; and (III) serpentinite seems to inhibit the formation of bioorganic molecules compared with the control (without mineral). [ABSTRACT FROM AUTHOR]

HCN-derived polymers are a heterogeneous group of complex substances synthesized from pure HCN; from its salts; from its oligomers, specifically its trimer and tetramer, amino-nalono-nitrile (AMN) and diamino-maleo-nitrile (DAMN), respectively; or from its hydrolysis products, such as formamide, under a wide range of experimental conditions. The characteristics and properties of HCN-derived polymers depend directly on the synthetic conditions used for their production and, by extension, their potential applications. These puzzling systems have been known mainly in the fields of prebiotic chemistry and in studies on the origins of life and astrobiology since the first prebiotic production of adenine by Oró in the early years of the 1960s. However, the first reference regarding their possible role in prebiotic chemistry was mentioned in the 19th century by Pflüger. Currently, HCN-derived polymers are considered keys in the formation of the first and primeval protometabolic and informational systems, and they may be among the most readily formed organic macromolecules in the solar system. In addition, HCN-derived polymers have attracted a growing interest in materials science due to their potential biomedical applications as coatings and adhesives; they have also been proposed as valuable models for multifunctional materials with emergent properties such as semi-conductivity, ferroelectricity, catalysis and photocatalysis, and heterogeneous organo-synthesis. However, the real structures and the formation pathways of these fascinating substances have not yet been fully elucidated; several models based on either computational approaches or spectroscopic and analytical techniques have endeavored to shed light on their complete nature. In this review, a comprehensive perspective of HCN-derived polymers is presented, taking into account all the aspects indicated above. [ABSTRACT FROM AUTHOR]

Hydrogen cyanide (HCN)-derived polymers have been recognized as sources of relevant organic molecules in prebiotic chemistry and material sciences. However, there are considerable gaps in the knowledge regarding the polymeric nature, the physicochemical properties, and the chemical pathways along polymer synthesis. HCN might have played an important role in prebiotic hydrothermal environments; however, only few experiments use cyanide species considering hydrothermal conditions. In this work, we synthesized an HCN-derived thermal polymer simulating an alkaline hydrothermal environment (i.e., HCN (l) 0.15 M, 50 h, 100 °C, pH approximately 10) and characterized its chemical structure, thermal behavior, and the hydrolysis effect. Elemental analysis and infrared spectroscopy suggest an important oxidation degree. The thermal behavior indicates that the polymer is more stable compared to other HCN-derived polymers. The mass spectrometric thermal analysis showed the gradual release of several volatile compounds along different thermal steps. The results suggest a complicate macrostructure formed by amide and hydroxyl groups, which are joined to the main reticular chain with conjugated bonds (C=O, N=O, –O–C=N). The hydrolysis treatment showed the pH conditions for the releasing of organics. The study of the synthesis of HCN-derived thermal polymers under feasible primitive hydrothermal conditions is relevant for considering hydrothermal vents as niches of chemical evolution on early Earth. [ABSTRACT FROM AUTHOR]

One of the major components of the organic solvent extractable fraction of Cretaceous ambers is 1,6-dimethyl-5-isopentyltetralin, a compound that has been incorrectly or not identified in previous reports on the molecular composition of Cretaceous ambers. Here, the purification and structural identification of 1,6-dimethyl-5-isopentyltetralin is reported from amber samples of the Cretaceous Peñacerrada II deposit at Peñacerrada, Álava (Basque-Cantabrian Basin, Spain). The structural identification of 1,6-dimethyl-5-isopentyltetralin allowed the complete identification of related compounds, comprising the family of 1,6-dimethyl-5-alkyltetralins. This suggests that those compounds, with concentrations up to 27% of the total organic extract of amber from Peñacerrada, are characteristic for labdane-type biomarkers in Cretaceous fossil resins and their distributions indicate different compositional families, related to their botanical and topographic origin. Also, the name amberene is proposed for the main molecule of this group. The relative proportion of the amberene-type compounds suggests three compositional families for the Cretaceous Spanish ambers. [ABSTRACT FROM AUTHOR]

Abstract The ability to establish biofilms is a key trait for microorganisms growing in extreme environments. The extracellular polymeric substances (EPS) present in biofilms provide not only surface attachment, but also protection against all kinds of environmental stressors, including desiccation, salinity, temperature or heavy metal pollution. The acquisition of suitable biofilm characteristics might thus be an important process mediating the adaptation of microorganisms to novel environmental conditions. In this work we have characterized the EPS of 20 phylogenetically diverse biofilms collected in situ from five contrasting extreme environments, including two geothermal areas (Copahue, Argentina; Seltun, Iceland), two cold areas (Pastoruri glacier, Peru; Byers Peninsula, Antarctica) and one extremely acidic river (Río Tinto, Spain). Biofilms were subjected to biochemical characterization, glycan profiling and immunoprofiling with an antibody microarray. Our results showed that environmental conditions strongly influence biofilm characteristics, with microorganisms from the same environment achieving similar EPS compositions regardless of the phylogeny of their main species. The concentration of some monosaccharides in the EPS could be related to environmental conditions such as temperature or heavy metal toxicity, suggesting that in some cases stress resistance can be mediated by specific sugars. Overall, our results highlight the existence of conserved EPS compositional patterns for each extreme environment, which could in turn be exploited to engineer ecological adaptations in genetically modified microorganisms. Graphical abstract Unlabelled Image Highlights • Biofilm formation provides stress resistance in extreme environments. • We analyzed 20 biofilms taken in situ from five contrasting extreme environments. • Environment, rather than phylogeny, determined exopolymeric substances composition. • Abundance of particular sugars could be traced to different environmental stressors. • Optimal biofilm composition is a hallmark of the adaptation to novel environments. [ABSTRACT FROM AUTHOR]