Search

Abstract Efficient exploration of geothermal resources is the basis of exploitation and utilization of geothermal resources. In recent years, Geographic Information System (GIS) has been increasingly used for the exploration owing to its power ability to integrate and analyze multiple sources of data related to the formation of geothermal resources, such as geology, geophysics, and geochemistry. Correctly understanding the control effect of evidence factors on geothermal resources is the premise and basis of whether the prediction results of evidence weight model are accurate. Traditionally, the conventional weight of evidence model assume that each evidence factor exerts a uniform controlling effect on the formation and distribution of geothermal resources. However, recent research indicates significant variations in the controlling ability of factors such as faults and granites, influenced by factors like activity levels and crystalline ages. Yet, studies addressing this differential control are lacking. To address this gap, we propose a series of weight of evidence models using abundant geological, geophysical, and geothermal data from the western Sichuan plateau, a high-temperature geothermal hotspot in China. This study aims to investigate the impact of varying controlling abilities of evidence factors on the evaluation model, with faults and granites as a case. Performance metrics include prediction rate, success rate index, receiver operating characteristic curve (ROC) and prediction rate of geothermal well. The findings of this research reveal that the weight of evidence model developed through the methodology outlined in this study exhibits superior performance compared to the conventional weight of evidence model. This superiority is evidenced by higher prediction rates, success indices, prediction rate of geothermal wells, and larger AUC values of ROC. Among these models, the weight of evidence model considering both fault and granite classification have the best performance in model evaluation indicators, with a prediction rate of 22.528 and a success index of 0.015408 in the very high potential area. The prediction rate and success index of the high potential area are 3.656 and 0.0025, respectively, and the prediction rate and success index of the middle potential area are 1.649 and 0.001128, respectively, and the AUC value is 0.808, indicating that the model has good accuracy. In terms of geothermal well prediction, the total prediction rate of geothermal favorable areas based on fault and granite classification evidence weight model is as high as 47.0526. Therefore, when constructing the weight of evidence model, the influence of the difference control of evidence factors on the formation of geothermal resources should be fully considered. These results underscore the effectiveness of the proposed methodology in enhancing the predictive accuracy and reliability of geothermal resource assessment in this study. Based on the prediction results of the weight of evidence model considering both fault and granite classification, four favorable geothermal areas with abundant surface heat display are identified in this paper, namely Kangding, Litang, Batang and Ganzi-Dege. In addition, the relatively weak surface heat display areas such as Jiulong, Daofu, Luhuo and Derong also show high geothermal potential. Some attention should be paid to geothermal exploration in the future.

Bacterial wilt caused by Ralstonia solanacearum is one of the most important diseases in solanaceous plants, including peppers. It generally tends to be more serious under warm−temperature and moist (WM) conditions than at moist room−temperature (RM) conditions. Although immunity mechanisms at room temperature have been intensively studied, the mechanisms underlying WM conditions remain poorly understood. Herein, the pepper cysteine protease CaZingipain2 was expressed and functionally characterized in pepper immunity against R. solanacearum at WM conditions and at room temperature. The results showed that CaZingipain2 localized to the nucleus and was upregulated at the transcript level in pepper plants upon R. solanacearum infection under WM conditions (RSWM). Virus−induced gene silencing of CaZingipain2 significantly increased the susceptibility of pepper plants to RSWM, and was coupled with the downregulation of CaPRP1 and CaMgst3, which are specifically related to pepper immunity against RSWM, according to our previous studies, while its overexpression significantly reduced the susceptibility of N. benethamiana plants to RSWM compared to that of wild−type plants. In addition, our data showed that CaZingipain2 also acts positively in pepper immunity against R. solanacearum infection at room temperature by upregulating the SA− and JA−responsive PR genes, including CaNPR1 and CaDEF1. All these results indicate that CaZingipain2 improves pepper immunity against R. solanacearum under WM conditions and at room temperature by regulating different PR genes.

Abstract Patients with chronic obstructive pulmonary disease (COPD) who exhibit elevated blood eosinophil levels often experience worsened lung function and more severe emphysema. This implies the potential involvement of eosinophils in the development of emphysema. However, the precise mechanisms underlying the development of eosinophil-mediated emphysema remain unclear. In this study, we employed single-cell RNA sequencing to identify eosinophil subgroups in mouse models of asthma and emphysema, followed by functional analyses of these subgroups. Assessment of accumulated eosinophils unveiled distinct transcriptomes in the lungs of mice with elastase-induced emphysema and ovalbumin-induced asthma. Depletion of eosinophils through the use of anti-interleukin-5 antibodies ameliorated elastase-induced emphysema. A particularly noteworthy discovery is that eosinophil-derived cathepsin L contributed to the degradation of the extracellular matrix, thereby leading to emphysema in pulmonary tissue. Inhibition of cathepsin L resulted in a reduction of elastase-induced emphysema in a mouse model. Importantly, eosinophil levels correlated positively with serum cathepsin L levels, which were higher in emphysema patients than those without emphysema. Expression of cathepsin L in eosinophils demonstrated a direct association with lung emphysema in COPD patients. Collectively, these findings underscore the significant role of eosinophil-derived cathepsin L in extracellular matrix degradation and remodeling, and its relevance to emphysema in COPD patients. Consequently, targeting eosinophil-derived cathepsin L could potentially offer a therapeutic avenue for emphysema patients. Further investigations are warranted to explore therapeutic strategies targeting cathepsin L in emphysema patients.

This study prepared silicon oxide anode materials with nitrogen-doped carbon matrices (SiOx/C–N) through silicon-containing polyester thermal carbonization. Melamine was introduced as a nitrogen source during the experiment. This nitrogen doping process resulted in a porous structure in the carbon matrices, a fact confirmed by scanning electron microscopy (SEM). Pyridinic and quaternary nitrogen, but mainly tertiary nitrogen, were generated, as shown via X-ray photoelectron spectroscopy (XPS). Electrochemical tests confirmed that, as anode materials for a lithium-ion battery, SiOx/C–N provided better cycle stability, improved rate capability, and lower Li+ diffusion resistance. The best performance showed an activated capacity at 493.5 mAh/g, preserved at 432.8 mAh/g after the 100th cycle, with 87.7% total Columbic efficiency. Those without nitrogen doping gave 1126.7 mAh/g, 249.0 mAh/g, and 22.1%, respectively. The most noteworthy point was that, after 100 cycles, anodes without nitrogen doping were pulverized into fine powders (SEM); meanwhile, in the case of anodes with nitrogen doping, powders of a larger size (0.5–1.0 µm) formed, with the accumulation of surrounding cavities. We suggest that the formation of more prominent powders may have resulted from the more substantial nitrogen-doped carbon matrices, which prevented the anode from further breaking down to a smaller size. The volume expansion stress decreased when the powders decreased to nanosize, which is why the nanosized silicon anode materials showed better cycling stability. When the anodes were cracked into powders with a determined diameter, the stress from volume expansion decreased to a level at which the powders could preserve their shape, and the breakage of the powders was stopped. Hence, the diameters of the final reserved powders are contingent on the strength of the matrix. As reported, nitrogen-doped carbon matrices are more robust than those not doped with nitrogen. Thus, in our research, anodes with nitrogen-doped carbon matrices presented more large-diameter powders, as SEM confirmed. Anodes with nitrogen doping will not be further broken at a larger diameter. At this point, the SEI film will not show continuous breakage and formation compared to the anode without doping. This was validated by the lower deposition content of the SEI-film-related elements (phosphorous and fluorine) in the cycled anodes with nitrogen doping. The anode without nitrogen doping presented higher content, meaning that the SEI films were broken many times during lithiation/delithiation (EDS mapping).

AbstractInvestigating the genesis of geothermal resources requires a thorough understanding of the heat source mechanism, which is also a vital basis for the efficient exploration and utilization of geothermal resources. Situated in the eastern Himalayan syntax, western Sichuan is considered to be one of the main concentration regions of high-temperature geothermal resources in China. To date, various studies have been carried out to reveal the heat source and genesis of the abundant high-temperature resources in this area; however, studies on the contribution of the radioactive heat generated by the widely distributed granitoids to the high-temperature geothermal resources remain scarce. In order to resolve this knowledge gap, we attempted to obtain evidence from the geochemical data published in the literature in the past few decades. A total of 548 radiogenic heat production rate data were determined. The statistical data indicate that the average concentrations of the heat-producing elements U, Th, and K are 6.09±5.22 ppm, 26.74±16.78 ppm, and 3.51±0.82%, respectively. The calculated heat production values of the granitoids vary from 0.52 to 10.86 μW/m3, yielding an arithmetic average value of 3.74±2.15 μW/m3, which is higher than that of global Mesozoic–Cenozoic granites (3.09±1.62 μW/m3). Based on the heat production values, the capacity of the granitic batholiths to store heat was assessed, and the Dongcuo pluton was found to be the largest heat reservoir (382.88×1013 J/a). The distribution of the crustal heat flow was examined using the calculated heat production data and the stratigraphic structure obtained via deep seismic sounding in the study area. The results indicate that the crustal heat flow is 48.3–56.2 mW/m2, which is mainly contributed by the radioactive decay in the granitoids in the upper crust. The fact that it accounts for nearly half of the regional background heat flow indicates that the radiogenic heat from the granitoids is an important heat source for the formation of the thermal anomaly and the high-temperature geothermal resources in the study area. Thus, the results obtained in this study highlight the importance of the widely distributed granitoids to high-temperature geothermal resources in western Sichuan.

Silicon-containing polyester from tetramethoxysilane, ethylene glycol, and o-Phthalic anhydride were used as encapsulating materials for silicon nano powders (SiNP) via electrospinning, with Polyacrylonitrile (PAN) as spinning additives. In the correct quantities, SiNP could be well encapsulated in nano fibers (200–400 nm) using scanning electron microscopy (SEM). The encapsulating materials were then carbonized to a Si-O-C material at 755 °C (Si@C-SiNF-5 and Si@C-SiNF-10, with different SiNP content). Fiber structure and SiNP crystalline structure were reserved even after high-temperature treatment, as SEM and X-ray diffraction (XRD) verified. When used as lithium ion battery (LIB) anode materials, the cycling stability of SiNPs increased after encapsulation. The capacity of SiNPs decreased to ~10 mAh/g within 30 cycles, while those from Si@C-SiNF-5 and Si@C-SiNF-10 remained over 500 mAh/g at the 30th cycle. We also found that adequate SiNP content is necessary for good encapsulation and better cycling stability. In the anode from Si@C-SiNF-10 in which SiNPs were not well encapsulated, fibers were broken and pulverized as SEM confirmed; thus, its cycling stability is poorer than that from Si@C-SiNF-5.

The combination of emulsified diesel and low temperature combustion (LTC) technology has great potential in reducing engine emissions. A visualization study on the spray and combustion characteristics of water emulsified diesel was conducted experimentally in a constant volume chamber under conventional and LTC conditions. The effects of ambient temperature on the evaporation, ignition and combustion characteristics of water emulsified diesel were studied under cold, evaporating and combustion conditions. Experimental results showed that the ambient temperature had little effect on the spray structures, in terms of the liquid core length, the spray shape and the spray area. However, higher ambient temperature slightly reduced the Sauter Mean Diameter (SMD) of the spray droplets. The auto-ignition delay time increased significantly with the decrease of the ambient temperature. The ignition process always occurred at the entrainment region near the front periphery of the liquid core. This entrainment region was evolved from the early injected fuel droplets which were heated and mixed by the continuous entrainment until the local temperature and equivalence ratio reached the ignition condition. The maximum value of integrated natural flame luminosity (INFL) reduced by 60% when the ambient temperature dropped from 1000 to 800 K, indicating a significant decrease of the soot emissions could be achieved by LTC combustion mode than the conventional diesel engines.

A novel potentiometric sensor based on a molecular imprinted polymer was developed for the determination of shikimic acid in herbal medicine. The imprinted polymer was synthesized via bulk polymerization of the functional monomer in the presence of trimethylolpropane triacrylate as the cross-linker with 2,20-azo-bisisobutyronitrile as the initiator and shikimic acid as the template. The sensing membrane was constructed by the inclusion of imprinted polymer in the polyvinyl chloride matrix. The effect of the identity of the imprinted polymer on the potentiometric response was observed. The optimal imprinted polyacrylamide was characterized by Fourier transform infrared spectroscopy and scanning electron microscopy. The performance of the imprinted membrane based sensor, including the effects of pH, response time and selectivity coefficient, was investigated. The imprinted sensor exhibited a fast near-Nernstian response in the concentration range of 1 × 10-5 to 1 × 10-1 mol/L with a detection limit of 9 × 10-6 mol/L. The analytical performance of the sensor supported the direct determination of shikimic acid in herbs, and the obtained results were validated by ultraviolet-visible absorption spectrophotometry. Advantages of the potentiometric sensor include enhanced sensitivity, high selectivity, long-term stability and low-cost fabrication, suggesting the device offers promise for the analysis of Chinese herbal medicine. [ABSTRACT FROM AUTHOR]

ABSTRACT: Processibilities of silicone composites were always a problem for their high content of SiO2 powders. This article found that the substitution of silicone resins for linear polydimethylsiloxanes (PDMS) made processibilities easier. Three silicone resins (MQ1.0, MQ1.1, and MQ1.2) with clarified chemical structures (by FT IR, 29Si NMR, and GPC) were adopted. Their shearing viscosities [η( γ ̇)] were greatly higher than PDMS with higher molecular weight, which could be assigned to stronger molecular interactions as surface tension and flowing activation energy ΔE indicated. On the contrary, η( γ ̇) of MQ‐PDMS binary blends greatly decreased to that even lower than either components (about 85% utmost decrease comparing to PDMS), for the variation of molecular interaction rather than dilution effect. Furtherly, when PDMS were partly replaced with MQ resins, process time of PDMS–SiO2 silicone composites were greatly shortened (from >6 to 2 h), while with better SiO2 dispersion (Mooney viscosity greatly decreased from 30.0 to 5.0 MU). Better dispersion of SiO2 fillers in composites could be confirmed by SEM and mechanical properties. For the better dispersion, mechanical properties of composites were improved with higher elastic modulus, higher tensile strength, and higher hardness, especially with higher elongation at break (utmost increased from 190% to 277%). © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018, 135, 46445. [ABSTRACT FROM AUTHOR]

High temperature (HT), high humidity (HH), and pathogen infection often co-occur and negatively affect plant growth. However, these stress factors and plant responses are generally studied in isolation. The mechanisms of synergistic responses to combined stresses are poorly understood. We isolated the subgroup IIb WRKY family member CaWRKY6 from Capsicum annuum and performed quantitative real-time PCR analysis. CaWRKY6 expression was upregulated by individual or simultaneous treatment with HT, HH, combined HT and HH (HTHH), and Ralstonia solanacearum inoculation, and responded to exogenous application of jasmonic acid (JA), ethephon, and abscisic acid (ABA). Virus-induced gene silencing of CaWRKY6 enhanced pepper plant susceptibility to R. solanacearum and HTHH, and downregulated the hypersensitive response (HR), JA-, ethylene (ET)-, and ABA-induced marker gene expression, and thermotolerance-associated expression of CaHSP24, ER-small CaSHP, and Chl-small CaHSP. CaWRKY6 overexpression in pepper attenuated the HTHH-induced suppression of resistance to R. solanacearum infection. CaWRKY6 bound to and activated the CaWRKY40 promoter in planta, which is a pepper WRKY that regulates heatstress tolerance and R. solanacearum resistance. CaWRKY40 silencing significantly blocked HR-induced cell death and reduced transcriptional expression of CaWRKY40. These data suggest that CaWRKY6 is a positive regulator of R. solanacearum resistance and heat-stress tolerance, which occurs in part by activating CaWRKY40. [ABSTRACT FROM AUTHOR]

Abstract  To obtain an oil-displacement polymer with good thermal stability and solution properties, self-assembling acrylamide (AM)/4-butylstyrene (BST) copolymers (PSA) were synthesized by the micellar copolymerization technique. The resulting polymer was characterized by elemental analysis and UV and FT-IR spectroscopy. Conventional DSC measurement was used successfully to characterize the hydrophobic microblock structure of PSA, and two glass transition temperatures were found in the polymer: at 203 °C for the AM segments and at 106 °C for the hydrophobic BST segments. The initial decomposition temperature (234 °C) of the polymer is higher than that of polyacrylamide (210 °C). The DSC and TG results suggest that incorporation of BST into PSA enhances the molecular rigidity and thermal stability of the polymer. The apparent viscosity of a PSA solution greatly depends on the amount of BST in the polymer, and the polymer exhibits salt-thickening, temperature-thickening, thixotropy, pseudo-plastic behavior, anti shearing, and good anti-aging properties at 80 °C. In addition, the apparent viscosities of PSA solutions are increased remarkably by the addition of a small amount of surfactant. AFM measurements show that large block-like aggregates and small compact aggregates are formed in aqueous solutions of 0.4 g⋅dL−1 PSA because of strong intermolecular hydrophobic associations, despite the low molecular weight, and their sizes increase upon addition of a small amount of salt. [ABSTRACT FROM AUTHOR]

The terpolymers (PASA) with acrylamide (AM), butyl styrene (BST), and sodium 2‐acrylamido‐2‐methylpropane sulfonate (NaAMPS) were synthesized by the micellar free radical copolymerization technique. The polymer composition was determined by the elemental analysis, and the block structure of PASA was characterized directly by DSC measurement. Incorporation of NaAMPS into the terpolymers may improve the water solubility and intermolecular association, and the feed amount of BST, sodium dodecyl sulfate (SDS) amount, and the total monomer concentration in the polymerization can influence apparently the viscosities of PASA. The polymer exhibits excellent viscosification effect, salt‐thickening, temperature‐thickening, thixotropy, pseudoplastic behavior or shear‐thickening relative to the BST content in PASA, excellent antiaging property at 85°C, and a dramatic increase in solution viscosity by the addition of little amount of SDS. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 4027–4038, 2007 [ABSTRACT FROM AUTHOR]

This paper is concerned with a new type of combustion system for a direct injection (DI) diesel engine, using spray impingement close to the slanting wall. The macrospray characteristics of the fuel jet impinging close to the slanting wall are investigated with the advanced particle image velocimetry (PIV) measuring technique in a constant-volume vessel. A single-cylinder DI diesel engine with the new combustion system is tested using different schemes. The experimental results obtained show that the new combustion system can improve the performance under medium and low engine loads. Even better performance will be obtained through further improvement. [ABSTRACT FROM AUTHOR]