Search

Large quantities of pumpkins, rich in valuable nutrients, are lost due to superficial imperfections or size variations. This study explores a solution: transforming this unused resource into a highly functional food ingredient-pumpkin powder obtained from dehydration. This study emphasizes the importance of a detailed particle-level mathematical model in dehydrator design and operation, particularly for drying conditions using air at temperatures between 333 K and 353 K. The model investigates the effect of sample geometry on the moisture reduction rate and the product quality. Here, a model considers mass and energy transport, including the shrinkage ratio of the samples. The results effectively demonstrate the deformation, moisture content, and temperature evolution within the samples throughout the drying process. The findings reveal that both the drying temperature and initial sample geometry significantly influence the moisture loss rate, the final product texture, and the powder's absorption capacity. Notably, the nutritional composition (except for lipids) remains largely unaffected by the drying process. Additionally, the bulk and compacted densities of the powders decrease with increasing temperature. These insights not only illuminate the performance of the drying process but also provide valuable knowledge regarding the dehydrated product's technological behavior and potential functionalities within various food applications. [ABSTRACT FROM AUTHOR]

A multi-objective optimization was performed using response surface methodology to obtain a high-value-added product, pectin enriched in polyphenols, from pomegranate peel. For this purpose, a green extraction technique that combines citric acid and ultrasound was carried out considering three variables: time, pH, and temperature. The extraction procedure was optimized using the Box–Behnken design, these being the most suitable conditions, with an extraction time of 34.16 min, a pH of 2.2, and a temperature of 89.87 °C. At this point, the pectin yield was 31.89%, with a total retained polyphenol content of 15.84 mg GAE/g pectin. In addition, the water activity, ash content, equivalent weight, methoxyl content, and degree of esterification were determined for the pectin obtained at the optimal point. This study demonstrates that polyphenol-enriched pectin can be obtained from pomegranate peel via an eco-friendly and efficient method, and that it presents similar properties to commercial pectin, preserving its quality and with potential use as an ingredient or food supplement with a high nutritional value. This work contributes to developing sustainable strategies to valorize pomegranate agro-industrial waste and produce high-value functional ingredients. [ABSTRACT FROM AUTHOR]

Watermelon is a fruit produced around the world. Unfortunately, about half of it—the rind—is usually discarded as waste. To transform such waste into a useful product like flour, a thermal treatment is needed. The drying temperature for the rind that produces flour with the best characteristics is most important. A multiobjective optimization (MOO) procedure was applied to define the optimum drying temperature for the rind flour fabrication to be used in bakery products. A neural network model of the fabrication process was developed with the drying temperature as input and five process indicators as outputs. The group of process indicators comprised acidity, pH, water-holding capacity (WHC), oil-holding capacity (OHC), and batch time. Those indicators represent conflicting objectives that are to be balanced by the MOO procedure using the weighted distance method. The MOO process showed that the temperature interval from 67.3 °C to 73.1 °C holds the compromise solutions for the conflicting indicators based on the stakeholder's preferences. Optimum indicator were 0.12–0.19 g malic acid/100 g dwb (acidity), 5.7–5.8 (pH), 8.93–9.08 g H2O/g dwb (WHC), 1.46–1.56 g oil/g dwb (OHC), and 128–139 min (drying time). [ABSTRACT FROM AUTHOR]

In this work, the kinetics of drying and rehydration of green apple slices peeled and unpeeled (Granny Smith cv) were studied. The apple slices were dried at 50, 60, and 70 °C, and after that, rehydrated at ambient (Ta) and boiling temperature (Tb). The drying kinetics were adjusted with the Dincer and Dost model, giving a good fit. Effective diffusivity (Deff) and the convective mass transfer coefficient (hm) were also determined, both coefficients increase with drying temperature, being 1.25 × 10−9 m2 s−1 and 9.53 × 10−7 m2 s−1 the highest values obtained for the peeled apple slices respectively. Peleg and Weibull models were adjusted to the rehydration experimental data obtaining a good fit (R2 > 0.99). Deff values increase significantly with rehydration temperature but take similar values between peeled and unpeeled samples. Acidity, pH, moisture content, solid soluble content, and equivalent diameter were determined to compare the fresh apple slices with those after dehydration and the post-rehydration process. The apple slices rehydrated at boiling temperature better preserved the characteristics of fresh samples due to the short immersion times in water, no significant differences were observed between peeled and unpeeled apples. According to the results, it is convenient to dry the apple slices unpeeled at 70 °C and rehydrate them at Tb. [ABSTRACT FROM AUTHOR]