Search

Natural aquatic environments such as oceans, lakes, and rivers are home to a tremendous diversity of microorganisms. Some may cross the air-water interface within droplets and become airborne, with the potential to impact the Earth's radiation budget, precipitation processes, and spread of disease. Larger droplets are likely to return to the water or adjacent land, but smaller droplets may be suspended in the atmosphere for transport over long distances. Here, we report on a series of controlled laboratory experiments to quantify wind-driven droplet production from a freshwater source for low wind speeds. The rate of droplet production increased quadratically with wind speed above a critical value (10-m equivalent 5.7 m/s) where droplet production initiated. Droplet diameter and ejection speeds were fit by a gamma distribution. The droplet mass flux and momentum flux increased with wind speed. Two mechanisms of droplet production, bubble bursting and fragmentation, yielded different distributions for diameter, speed, and angle. At a wind speed of about 3.5 m/s, aqueous suspensions of the ice-nucleating bacterium Pseudomonas syringae were collected at rates of 283 cells m-2 s-1 at 5 cm above the water surface, and at 14 cells m-2 s-1 at 10 cm above the water surface. At a wind speed of about 4.0 m/s, aqueous suspensions of P. syringae were collected at rates of 509 cells m-2 s-1 at 5 cm above the water surface, and at 81 cells m-2 s-1 at 10 cm above the water surface. The potential for microbial flux into the atmosphere from aquatic environments was calculated using known concentrations of bacteria in natural freshwater systems. Up to 3.1 × 104 cells m-2 s-1 of water surface were estimated to leave the water in potentially suspended droplets (diameters <100 mm). Understanding the sources and mechanisms for bacteria to aerosolize from freshwater aquatic sources may aid in designing management strategies for pathogenic bacteria, and could shed light on how bacteria are involved in mesoscale atmospheric processes. [ABSTRACT FROM AUTHOR]

New tools and technology are needed to study microorganisms in freshwater environments. Little is known about spatial distribution and ice nucleation activity (INA) of microorganisms in freshwater lakes. We developed a system to collect water samples from the surface of lakes using a 3D-printed sampling device tethered to a drone (DOWSE, DrOne Water Sampling SystEm). The DOWSE was used to collect surface water samples at different distances from the shore (1, 25, and 50 m) at eight different freshwater lakes in Austria in June 2018. Water samples were filtered, and microorganisms were cultured on two different media types, TSA (a general growth medium) and KBC (a medium semi-selective for bacteria in the genus Pseudomonas). Mean concentrations (colony forming units per mL, or CFU/mL) of bacteria cultured on TSA ranged from 19,800 (Wörthersee) to 210,500 (Gosaulacke) CFU/mL, and mean concentrations of bacteria cultured on KBC ranged from 2590 (Ossiachersee) to 11,000 (Vorderer Gosausee) CFU/mL. There was no significant difference in sampling distance from the shore for concentrations of microbes cultured on TSA (p = 0.28). A wireless bathymetry sensor was tethered to the drone to map temperature and depth across the sampling domain of each of the lakes. At the 50 m distance from the shore, temperature ranged from 17 (Hinterer Gosausee, and Gosaulacke) to 26 °C (Wörthersee), and depth ranged from 2.8 (Gosaulacke) to 11.1 m (Grundlsee). Contour maps of concentrations of culturable bacteria across the drone sampling domain revealed areas of high concentrations (hot spots) in some of the lakes. The percentage of ice-nucleation active (ice+) bacteria cultured on KBC ranged from 0% (0/64) (Wörthersee) to 58% (42/72) (Vorderer Gosausee), with a mean of 28% (153/544) for the entire sample set. Future work aims to elucidate the structure and function of entire microbial assemblages within and among the Austrian lakes. [ABSTRACT FROM AUTHOR]

Concentrations of airborne chemical and biological agents from a hazardous release are not spread uniformly. Instead, there are regions of higher concentration, in part due to local atmospheric flow conditions which can attract agents. We equipped a ground station and two rotary-wing unmanned aircraft systems (UASs) with ultrasonic anemometers. Flights reported here were conducted 10 to 15 m above ground level (AGL) at the Leach Airfield in the San Luis Valley, Colorado as part of the Lower Atmospheric Process Studies at Elevation—a Remotely-Piloted Aircraft Team Experiment (LAPSE-RATE) campaign in 2018. The ultrasonic anemometers were used to collect simultaneous measurements of wind speed, wind direction, and temperature in a fixed triangle pattern; each sensor was located at one apex of a triangle with ∼100 to 200 m on each side, depending on the experiment. A WRF-LES model was used to determine the wind field across the sampling domain. Data from the ground-based sensors and the two UASs were used to detect attracting regions (also known as Lagrangian Coherent Structures, or LCSs), which have the potential to transport high concentrations of agents. This unique framework for detection of high concentration regions is based on estimates of the horizontal wind gradient tensor. To our knowledge, our work represents the first direct measurement of an LCS indicator in the atmosphere using a team of sensors. Our ultimate goal is to use environmental data from swarms of sensors to drive transport models of hazardous agents that can lead to real-time proper decisions regarding rapid emergency responses. The integration of real-time data from unmanned assets, advanced mathematical techniques for transport analysis, and predictive models can help assist in emergency response decisions in the future. [ABSTRACT FROM AUTHOR]

Biological aerosols (bioaerosols) are ubiquitous in terrestrial and aquatic environments and may influence cloud formation and precipitation processes. Little is known about the aerosolization and transport of bioaerosols from aquatic environments. We designed and deployed a bioaerosol-sampling system onboard an unmanned surface vehicle (USV; a remotely operated boat) to collect microbes and monitor particle sizes in the atmosphere above a salt pond in Falmouth, MA, United States and a freshwater lake in Dublin, VA, United States. The bioaerosol-sampling system included a series of 3D-printed impingers, two different optical particle counters, and a weather station. A small unmanned aircraft system (sUAS; a remotely operated airplane) was used in a coordinated effort with the USV to collect microorganisms on agar media 50 m above the surface of the water. Samples from the USV and sUAS were cultured on selective media to estimate concentrations of culturable microorganisms (bacteria and fungi). Concentrations of microbes from the sUAS ranged from 6 to 9 CFU/m 3 over saltwater, and 12 to 16 CFU/m 3 over freshwater (over 10-min sampling intervals) at 50 m above ground level (AGL). Concentrations from the USV ranged from 0 (LOD) to 42,411 CFU/m 3 over saltwater, and 0 (LOD) to 56,809 CFU/m 3 over freshwater (over 30-min sampling intervals) in air near the water surface. Particle concentrations recorded onboard the USV ranged from 0 (LOD) to 288 μg/m 3 for PM1, 1 to 290 μg/m 3 for PM2.5, and 1 to 290 μg/m 3 for PM10. A general trend of increasing concentration with an increase in particle size was recorded by each sensor. Through laboratory testing, the collection efficiency of the 3D-printed impingers was determined to be 75% for 1 μm beads and 99% for 3 μm beads. Additional laboratory tests were conducted to determine the accuracy of the miniaturized optical particle counters used onboard the USV. Future work aims to understand the distribution of bioaerosols above aquatic environments and their potential association with cloud formation and precipitation processes.