Search

Background: Inflammation contributes to cancer pathobiology through different mechanisms. Higher levels of pro-inflammatory cytokines can lead to hyperinflammation and promote cancer development and metastasis. For cancer treatment, Doxorubicin (DOX) can be encapsulated into the poly-lactic-glycolic acid (PLGA) nanoparticles. This study aimed to investigate the impact of doxorubicin-loaded PLGA nanoparticles (DOX-PLGA NP) on the expression of pro-inflammatory genes TNF-α, IL-6, iNOS, and IL-1β in the MCF-7 cells. Methods: The DOX-PLGA NP was prepared by loading doxorubicin into PLGA and characterized using dynamic light scattering (DLS) and atomic force microscopy (AFM). The cytotoxic effect of the nanoparticles was determined by the MTT assay, and their impacts on the expression of pro-inflammatory genes were assessed by qRT-PCR. Results: The encapsulation efficiency and loading capacity were 60±1.5 and 1.13±0.21 percent, respectively. The zeta potential and mean DOX-PLGA nanoparticle size were -18±0.550 mV and 172±55.6 nm, respectively. The 50% inhibitory concentration (IC50) of the DOX-PLGA NP on MCF-7 cell viability was 24.55 μg/mL after 72 hours of treatment. The qRT-PCR results revealed that the 20 μg/mL concentration of the DOX-PLGA NP significantly suppressed the expression of the pro-inflammatory genes TNF-α, IL-6, iNOS, and IL-1β compared to DOX alone (20 μg/mL). Additionally, the suppression effect of DOX-PLGA NP on the expression of these pro-inflammatory genes was dose-dependent. Conclusion: These results show that DOX-PLGA NP efficiently suppressed the expression of proinflammatory genes. Furthermore, encapsulation of DOX into PLGA nanoparticles significantly improved the effectiveness of DOX in suppressing pro-inflammatory genes in MCF-7 breast cancer cells. [ABSTRACT FROM AUTHOR]

This study evaluated the effect of anodized titanium implants coated with submicron-sized poly(lactide-co-glycolide) (PLGA)/recombinant human transforming growth factor-β2 (rhTGF-β2) particles via electrospray on osseointegration in an in vivo model. Materials and Methods: An experimental group of anodized titanium implants coated with submicron PLGA/rhTGF-β2 particles by electrospray was compared topographically and histomorphometrically to noncoated anodized implants. Forty-eight anodized titanium implants were inserted into the tibias of 12 New Zealand rabbits. The histomorphometric specimens were prepared after sacrificing at 3 and 6 weeks after implant placement. Bone-to-implant contact percentage (BIC%) and bone area percentage (BA%) were calculated. The surface roughness and histomorphometric values were statistically analyzed, with a P value < .05 defined as statistically significant. Results: The implant surfaces showed a uniform submicron-sized coating of PLGA/rhTGF-β2 particles. There was no significant difference in surface roughness between the groups. Both BIC% and BA% of the three best consecutive threads in the experimental group (3 weeks postplacement) were significantly higher than those of the control group (P = .045 and P = .048, respectively), whereas only the BIC% of the three best consecutive threads of the experimental group (6 weeks postplacement) was higher than that of the control group (P = .033). None of the groups tested showed any statistically significant differences in these metrics along the total length of the implant. Conclusion: Within the limitations of this study, coating rhTGF-β2 on implants with the help of PLGA carriers by electrospray may have enhanced osseointegration during the early stage of implant healing period in in-vivo rabbit tibia model. [ABSTRACT FROM AUTHOR]

Background. Polylactic-co-glycolic acid and zinc oxide (PLGA-ZnO) nanocomposite has been investigated for its antibacterial properties, which could be beneficial for adding to wound dressings after periodontal surgery. However, its cytotoxicity against human gingival fibroblasts (HGFs) remains unclear and should be evaluated. Methods. ZnO nanoparticles were synthesized using the hydrothermal method. These metallic nanoparticles were incorporated into the PLGA matrix by the solvent/non-solvent process. The nanomaterial was evaluated by field emission scanning electron microscopy (FESEM), Fourier transform infrared (FTIR), thermogravimetric analysis (TGA), and x-ray diffraction (XRD) analyses. HGF cells were acquired from the National Cell Bank and categorized into four groups: ZnO, PLGA, ZnO-PLGA, and control. The cells were exposed to different ZnO (1, 20, 40, 60, 80, and 100 µg/mL) and PLGA (0.2, 4, 8, 12, 16, and 20 µg/mL) concentrations for 24 and 48 hours. The cytotoxicity was tested using the MTT assay. The data were analyzed using SPSS 25, and P < 0.05 was considered statistically significant. Results. ZnO nanoparticles exhibited significant toxicity at = 40 µg/mL concentrations after 24 hours. Cell viability decreased significantly at all the tested concentrations after 48 hours of exposure. PLGA-ZnO cell viability in 24 hours was similar to the control group for all the concentrations up to 80 µg/mL. Conclusion. ZnO nanoparticles could be toxic against HGF in high concentrations and with prolonged exposure. Therefore, incorporating ZnO nanoparticles into a biocompatible polymer such as PLGA could be a beneficial strategy for reducing their toxicity. [ABSTRACT FROM AUTHOR]

Simvastatin embedded into poly(lactic-co-glycolic acid) (PLGA)-based scaffolds can stimulate bone regeneration in preclinical models. However, the ideal pharmacological dose has not been evaluated. This systematic review reports on the simvastatin doses used in preclinical studies and evaluates the regeneration of critical-sized bone defects. References were selected in a two-phase process. Electronic databases (Embase, LILACS, LIVIVO, PubMed, SCOPUS, and Web of Science) and grey literature databases (Google Scholar, Open Grey, and ProQuest) were searched until September 2022. The risk of bias was considered to be low based on the SYRCLE tool. We identified four studies in rat, two in parietal and two in calvaria bone, one in mouse parietal bone, and one in rabbit femur bone. Simvastatin, ranging from 8 to 100 µg, significantly increased bone formation in five studies, as compared to the scaffold alone based on µ-computed tomography, histomorphometric, and radiography analysis. The median increase in bone formation caused by simvastatin was 2.1-fold compared to the PLGA-based scaffold alone. There was, however, no significant correlation between the relative bone gain and the doses of simvastatin (p = 0.37). The data suggest that relatively lower doses of simvastatin can consistently promote preclinical bone regeneration. However, the interpretation of these data must consider the heterogenicity of the PLGA-scaffolds, the defect anatomy, the observation period, and the evaluation method. [ABSTRACT FROM AUTHOR]

Background: Conventional periodontal therapy relies on bone regeneration strategies utilizing scaffolds made of diverse materials, among which collagen, to promote cell adhesion and growth. Objective: To evaluate periodontal ligament fibroblast (HPdLF) cell adhesion and viability for periodontal regeneration purposes on hydroxyapatite scaffolds containing collagen (HAp-egg shell) combined with polylactic acid–polyglycolic acid copolymer (PLGA) and Platelet-Rich Fibrin (PRF). Methods: Four variations of the HAp-egg shell were used to seed HPdLF for 24 h and evaluate cell viability through a live/dead assay: (1) (HAp-egg shell/PLGA), (2) (HAp-egg shell/PLGA + collagen), (3) (HAp-egg shell/PLGA + PRF) and (4) (HAp-egg shell/PLGA + PRF + collagen). Cell adhesion and viability were determined using confocal microscopy and quantified using central tendency and dispersion measurements; significant differences were determined using ANOVA (p < 0.05). Results: Group 1 presented low cell viability and adhesion (3.70–10.17%); groups 2 and 3 presented high cell viability and low cell adhesion (group 2, 59.2–11.1%, group 3, 58–4.6%); group 4 presented the highest cell viability (82.8%) and moderate cell adhesion (45%) (p = 0.474). Conclusions: The effect of collagen on the HAp-egg shell/PLGA scaffold combined with PRF favored HPdLF cell adhesion and viability and could clinically have a positive effect on bone defect resolution and the regeneration of periodontal ligament tissue. [ABSTRACT FROM AUTHOR]

Objectives: This study aimed to explore the effects of bone morphogenetic protein 2 (BMP-2) encapsula-ted in poly(lactic-co-glycolic acid) (PLGA) microcapsules with different molecular weights on the osteogenic ability of osteoblasts., Methods: PLGA microcapsules with different molecular weights (12 000, 30 000) encapsulating BMP-2, were prepared using a dual-channel microinjection pump. The morphology and structure of the microcapsules were characterized by optical microscopy and scanning electron microscopy. The sustained-release performance of the microcapsules was characterized by phosphate buffered saline immersion method. The cell compatibility of the microcapsules was detected by the Calcein-AM/PI staining and CCK-8 method. The chemotactic effect of BMP-2-encapsulated microcapsules on MC3T3-E1 cells after 48 h of treatment was detected by the Transwell assay. The alkaline phosphatase activity assay and Alizarin Red S staining were used to characterize the effect of microcapsules on the osteogenic ability of MC3T3-E1 cells., Results: Both types of microcapsules with different molecular weights exhibited smooth surfaces, as well as uniform and good cell compatibility. The chemotactic effect of the 12 000 microcapsules was outstanding. The 30 000 microcapsules had a longer sustained-release time, and the initial burst release was reduced by approximately 25% compared with the 12 000 microcapsules. In addition, 30 000 microcapsules performed better in long-term osteogenesis induction than 12 000 microcapsules., Conclusions: In this study, the release of BMP-2 is regulated by adjusting the molecular weight of PLGA, and the results indicate that 30 000 microcapsules can better induce the long-term osteogenic ability of MC3T3-E1 cells.

Background: Excessive inflammation in the periodontal tissue after tooth replantation can lead to inflammatory root resorption and interrupt periodontal tissue regeneration. We tested the hypothesis that nuclear factor-κB decoy oligodeoxynucleotide-loaded poly lactic-co-glycolic acid nanospheres (NF-PLGA) inhibit excessive inflammation and promote healing of periodontal tissue after replantation in rats.Methods: The upper right incisors of rats were extracted, immersed in different specific solutions, and replanted. The rats were euthanized at 7, 14, and 28 days after replantation. Morphological evaluation with micro-CT and histological assessment with hematoxylin and eosin and tartrate-resistant acid phosphatase (TRAP) staining was performed. Additionally, we examined the expression of interleukin (IL)-1β, IL-6, transforming growth factor-β1 (TGF-β1), and fibroblast growth factor-2 (FGF-2) in the periodontal ligament (PDL) by performing immunohistological assessment.Results: The NF-PLGA group showed significantly greater dental root thickness than the other experimental groups. Root resorption was not observed after the application of NF-PLGA on day 7. The application of NF-PLGA also resulted in a significantly lower number of TRAP-positive osteoclasts on days 7 and 14 after replantation. Significantly lower expression of IL-1β and IL-6 and higher expression of TGF-β1 and FGF-2 were observed under the application of NF-PLGA in the PDL.Conclusions: NF-PLGA promoted the healing process by inhibiting the initial excessive inflammatory response in the PDL, preventing root resorption, and promoting periodontal tissue regeneration. The findings also suggested that the PLGA nanospheres-mediated transfection of the decoy oligodeoxynucleotides can be useful for the clinical application of replanted tooth root surfaces. [ABSTRACT FROM AUTHOR]

The purpose of the present study was to create resorbable nanoparticles (NPs) using poly(lactic-co-glycolic acid) (PLGA) to develop novel antibacterial therapeutics for the treatment of chronic wound infections that are susceptible to recurrent infections. By first performing a release study, it was possible to predict the behavior of the different PLGA NP formulations and assess the efficacy of the nanocomposite drug delivery system. These PLGA NP formulations consisted of varying ratios of PLGA without polyvinyl alcohol (PVA) and PLGA with PVA (PLGA-PVA) (i.e., 25:75[PLGA25], 50:50[PLGA50], and 75:25[PLGA75]). Then, different antibiotics (i.e., ciprofloxacin and gentamicin) were incorporated into the PLGA NP formulations to test the antibacterial efficacy of these antimicrobial NPs against different pathogens (i.e., methicillin-resistant Staphylococcus aureus USA300 [MRSA], Pseudomonas aeruginosa FRD1, and Acinetobacter baumannii BAA1605). Of particular interest was testing against the MRSA strain USA300 and the P. aeruginosa strain FRD1. This was possible by measuring the zone of inhibition. A 3-day period was used to monitor the antibacterial efficacy of the different PLGA NP formulations (i.e., PLGA25, PLGA50, and a 1:1 combination of PLGA25:PLGA50) against A. baumannii BAA1605, MRSA, and P aeruginosa FRD1. Throughout the study, A. baumannii was a negative control and was resistant to all the PLGA NP formulations loaded with ciprofloxacin and gentamicin. At the end of the 3-day period, the PLGA and PLGA50 ciprofloxacin-loaded formulations produced zones of inhibition of 27 mm and 23 mm, respectively, against P. aeruginosa FRD1. This indicated that P. aeruginosa FRD1 was susceptible to both formulations. The mixed formulations with equal parts PLGA25:PLGA50 loaded with ciprofloxacin produced a zone of inhibition (i.e., 25 mm). This again indicated that P. aeruginosa FRD1 was susceptible to ciprofloxacin. The formulations tested against MRSA showed that only gentamicin-loaded formulations produced intermediate results, and that ciprofloxacin-loaded formulations were ineffective. The PLGA25 and the PLGA50 NP formulations loaded with gentamicin both produced zones of inhibition of 13 mm. This indicated that MRSA was intermediate to both the formulations. The PLGA25:PLGA50 loaded with gentamicin produced a zone of inhibition of 14 mm, which again showed that MRSA was intermediate to this formulation. Overall, these PLGA NP formulations showed the sustained antibacterial potential of a burst release, followed by a sustained release of antibiotics from antibiotics loaded PLGA NPs in a controlled manner. In the future, this can help prevent the emergence of recurrent infections in the treatment of chronic wounds and reduce the number of medical dressing changes., (© The Association of Military Surgeons of the United States 2024. All rights reserved. For commercial re-use, please contact reprints@oup.com for reprints and translation rights for reprints. All other permissions can be obtained through our RightsLink service via the Permissions link on the article page on our site–for further information please contact journals.permissions@oup.com.)

Simvastatin embedded into poly(lactic-co-glycolic acid) (PLGA)-based scaffolds can stimulate bone regeneration in preclinical models. However, the ideal pharmacological dose has not been evaluated. This systematic review reports on the simvastatin doses used in preclinical studies and evaluates the regeneration of critical-sized bone defects. References were selected in a two-phase process. Electronic databases (Embase, LILACS, LIVIVO, PubMed, SCOPUS, and Web of Science) and grey literature databases (Google Scholar, Open Grey, and ProQuest) were searched until September 2022. The risk of bias was considered to be low based on the SYRCLE tool. We identified four studies in rat, two in parietal and two in calvaria bone, one in mouse parietal bone, and one in rabbit femur bone. Simvastatin, ranging from 8 to 100 µg, significantly increased bone formation in five studies, as compared to the scaffold alone based on µ-computed tomography, histomorphometric, and radiography analysis. The median increase in bone formation caused by simvastatin was 2.1-fold compared to the PLGA-based scaffold alone. There was, however, no significant correlation between the relative bone gain and the doses of simvastatin (p = 0.37). The data suggest that relatively lower doses of simvastatin can consistently promote preclinical bone regeneration. However, the interpretation of these data must consider the heterogenicity of the PLGA-scaffolds, the defect anatomy, the observation period, and the evaluation method.

Tissue regeneration is the procedure of renewal, restoration and growth of injured tissues and defective organs including nerve, bone, tooth, cartilage and blood vessels. Repair process of damaged tissues needs non-invasive methods; so, the scientists have recently focused on alternative treatment pathways. Nano gels based on Poly Lactic-co-Glycolic Acid have been designed for different purposes in medicine. It is a biodegradable and biocompatible polymer composite. Also, human dental pulp stem cells embedded in the Poly Lactic-co-Glycolic Acid scaffold have proliferation ability and differentiation potential. They can differentiate into different cell lineages, including bone, cartilage, nerve, tooth and other tissues. So, this treatment technology can be used for tissue engineering in regenerative medicine. On the other hand, this structure is a promising application for targeted cancer therapy. Therefore, this review studied tissue, especially tooth regeneration based on the new designed Nano composite scaffolds embedded with Poly Lactic-co-Glycolic Acid hydrogel and dental pulp stem cells., Competing Interests: None., (AJTR Copyright © 2024.)

Background: Open reduction with internal fixation is the preferred treatment option for displaced facial bone fractures. The superior mechanical properties of metallic plates have made them the most widely used material in existing bone fixation systems. However, after the healing period, these permanent plates can cause various problems. Alternative bioresorbable materials are being investigated to reduce these potential problems. This study compares bone stability and viability by using graphene oxide (GO)-doped poly-lactic-co-glycolic acid (PLGA) nanofiber plates and titanium plates for rats with fractured mandibles., Materials and Methods: The study included 20 male Sprague-Dawley rats, divided into four groups: a control group (Group I), a mandibular fracture group with no additional application (Group II), a mandibular fracture group repaired with titanium plates (Group III), and a mandibular fracture group repaired with GO-PLGA plates (Group IV). After 2 months, all of the rats were euthanized. A bone compression test was performed to assess bone stability, and a histological examination was performed to evaluate bone healing., Results: The osteocyte lacunae, Haversian ducts, canaliculi, and vascular structures of Group IV were found to be higher. In the compression test, vertical compression was applied to the bone axis, and Group IV had a higher maximum load and maximum stretch. GO-PLGA plates were found to be statistically superior to titanium plates in terms of both bone stability and bone healing (p < 0.05)., Conclusions: The present study found that GO-PLGA plates are more effective than titanium plates for the treatment of mandibular corpus fractures., Competing Interests: Declaration of Competing Interest None declared., (Copyright © 2024 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.)

Background: With the global increase in antibacterial resistance, the challenge faced by developing countries is to utilize the available antibiotics, alone or in combination, against resistant bacterial strains. We aimed to encapsulate the levofloxacin (LVX) into polymeric nanoparticles using biodegradable polymers i.e. Chitosan and PLGA, estimating their physicochemical characteristics followed by functional assessment as nanocarriers of levofloxacin against the different resistant strains of bacteria isolated from biological samples collected from tertiary care hospital in Lahore, Pakistan., Methods: LVX-NPs were synthesized using ion gelation and double emulsion solvent-evaporation method employing chitosan (CS) and poly-lactic-co-glycolic acid (PLGA), characterized via FTIR, XRD, SEM, and invitro drug release studies, while antibacterial activity was assessed using Kirby-Bauer disc-diffusion method., Results: Data revealed that the levofloxacin-loaded chitosan nanoparticles showed entrapment efficiency of 57.14% ± 0.03 (CS-I), 77.30% ± 0.08(CS-II) and 87.47% ± 0.08 (CS-III). The drug content, particle size, and polydispersity index of CS-I were 52.22% ± 0.2, 559 nm ± 31 nm, and 0.030, respectively, whereas it was 66.86% ± 0.17, 595 nm ± 52.3 nm and 0.057, respectively for CS-II and 82.65% ± 0.36, 758 nm ± 24 nm and 0.1, respectively for CS-III. The PLGA-levofloxacin nanoparticles showed an entrapment efficiency of 42.80% ± 0.4 (PLGA I) and 23.80% ± 0.4 (PLGA II). The drug content, particle size and polydispersity index of PLGA-I were 86% ± 0.21, 92 nm ± 10 nm, and 0.058, respectively, whereas it was 52.41% ± 0.45, 313 nm ± 32 nm and 0.076, respectively for PLGA-II. The XRD patterns of both polymeric nanoparticles showed an amorphous nature. SEM analysis reflects the circular-shaped agglomerated nanoparticles with PLGA polymer and dense spherical nanoparticles with chitosan polymer. The in-vitro release profile of PLGA-I nanoparticles showed a sustained release of 82% in 120 h and it was 58.40% for CS-III. Both types of polymeric nanoparticles were found to be stable for up to 6 months without losing any major drug content. Among the selected formulations, CS-III and PLGA-I, CS-III had better antibacterial potency against gram+ve and gram-ve bacteria, except for K. pneumonia, yet, PLGA-I demonstrated efficacy against K. pneumonia as per CSLI guidelines. All formulations did not exhibit any signs of hemotoxicity, nonetheless, the CS-NPs tend to bind on the surface of RBCs., Conclusion: These data suggested that available antibiotics can effectively be utilized as nano-antibiotics against resistant bacterial strains, causing severe infections, for improved antibiotic sensitivity without compromising patient safety., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Controlled degradation of biodegradable poly-lactic-co-glycolic acid (PLGA) trauma implants may increase interfragmentary loading which is known to accelerate fracture healing. Additive manufacturing allows us to tune the mechanical properties of PLGA scaffolds; however, little is known about this novel approach. The purpose of this study was to use in vitro and in vivo models to determine the degradative kinetics of additively manufactured test coupons fabricated with PLGA. We hypothesized that 1) increases in infill density would lead to improved initial mechanical properties, and 2) loss of mechanical properties would be constant as a function of time, regardless of implant design. Porous and solid test coupons were fabricated using 85:15 PLGA filament. Coupons were either incubated in serum or implanted subcutaneously in rats for up to 16 weeks. Samples were tested in tension, compression, torsion, and bending on a universal test frame. Variables of interest included, but were not limited to: stiffness, and ultimate force for each unique test. Infill density was the driving factor in test coupon mechanical properties, whereas differences in lattice architecture led to minimal changes. We observed moderate levels of degradation after 8 weeks, and significant decreases for all specimens after 16 weeks. Results from this study suggest substantial degradation of 3-D printed PLGA implants occurs during the 8- to 16-week window, which may be desirable for bone fracture repair applications. This study represents initial findings that will help us better understand the complicated interactions between overall implant design, porosity, and implant biodegradation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Introduction: The aim of this study was to evaluate the anti-osteoclastic activity of calcium hydroxide-loaded poly(lactic-co-glycolic acid) nanoparticles [Ca(OH) 2 -loaded PLGA NPs] in comparison to calcium hydroxide nanoparticles [Ca(OH) 2 NPs]., Methods: RAW 264.7 cell lines (third-fifth passage) were cultured and incubated with soluble receptor activator of nuclear factor kappa B ligand in triplicate. Subsequently, Ca(OH) 2 -loaded PLGA NPs and Ca(OH) 2 NPs were added for 7 days to evaluate their effects on receptor activator of nuclear factor kappa B ligand-induced osteoclast differentiation of RAW 264.7 cells by tartrate-resistant acid phosphatase activity. Additionally, a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay was conducted to confirm the cytotoxicity of treatments to cells., Results: Tartrate-resistant acid phosphatase staining showed a significant reduction in the osteoclast number when treated with Ca(OH) 2 -loaded PLGA NPs compared with Ca(OH) 2 NPs (P < .01). In comparison to the control, the number of osteoclasts significantly reduced upon treatment with Ca(OH) 2 -loaded PLGA NPs (P < .05), but there was no significant difference in Ca(OH) 2 NPs. Furthermore, osteoclast morphology in both treatment groups exhibited smaller sizes than the control group. Neither Ca(OH) 2 -loaded PLGA NPs nor Ca(OH) 2 NPs demonstrated cytotoxic effects on RAW264.7 cells., Conclusions: Both Ca(OH) 2 NPs with and without poly(lactic-co-glycolic acid) have the ability to inhibit osteoclast differentiation. However, Ca(OH) 2 -loaded PLGA NPs exhibit greater potential than Ca(OH) 2 NPs, making them a promising intracanal medicament for cases of root resorption., (Copyright © 2024 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.)

The degradation of peptide drugs limits the application of peptide drug microspheres. Structural changes of peptides at the water-oil interface and the destruction of their spatial structure in the complex microenvironment during polymer degradation can affect drug release and in vivo biological activity. This study demonstrates that adding hydroxyethyl starch (HES) to the internal aqueous phase (W 1 ) significantly enhances the stability of semaglutide and optimizes its release behavior in PLGA microspheres. The results showed that this improvement was due to a spontaneous exothermic reaction (ΔH = -132.20 kJ mol -1 ) facilitated by hydrogen bonds. Incorporating HES into the internal aqueous phase using the water-in-oil-in-water (W 1 /O/W 2 ) emulsion method yielded PLGA microspheres with a high encapsulation rate of 94.38 %. Moreover, microspheres with HES demonstrated well-controlled drug release over 44 days, unlike the slower and incomplete release in microspheres without HES. The optimized h-MG2 formulation achieved a more complete drug release (83.23 %) and prevented 30.65 % of drug loss compared to the HES-free microspheres within the same period. Additionally, the optimized semaglutide microspheres provided nearly three weeks of glycemic control with adequate safety. In conclusion, adding HES to the internal aqueous phase improved the in-situ drug stability and release behavior of semaglutide-loaded PLGA microspheres, effectively increasing the peptide drug payload in PLGA microspheres., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

The challenges in the treatment of extensive bone defects are infection control and bone regeneration. Bone tissue engineering is currently one of the most promising strategies. In this study, a short biopeptide with specific osteogenic ability is designed by fusion peptide technology and encapsulated with chitosan-modified poly(lactic acid-glycolic acid) (PLGA) microspheres. The fusion peptide (FP) mainly consists of an osteogenic functional sequence (P-15) and a bone-specific binding sequence (Asp-6), which can regulate bone formation accurately and efficiently. Chitosan-modified PLGA with antimicrobial and pro-healing effects is used to achieve the sustained release of fusion peptides. In the early stage, the antimicrobial and soft tissue healing effects can stop the wound infection as soon as possible, which is relevant for the subsequent bone regeneration process. Our data show that CS-PLGA@FP microspheres have antibacterial and pro-cell migration effects in vitro and excellent pro-wound-healing effects in vivo. In addition, CS-PLGA@FP microspheres promote the expression of osteogenic-related factors and show excellent bone regeneration in a rat defect model. Therefore, CS-PLGA@FP microspheres are an efficient biomaterial that can accelerate the recovery of bone defects.

Biodegradable polyesters are widely employed in the development of controlled release systems for peptide drugs. However, one of the challenges in developing a polyester-based delivery system for peptides is the acylation reaction between peptides and polymers. Peptide acylation is an important factor that affects formulation stability and can occur during storage, in vitro release, and after drug administration. This review focuses on the mechanisms and parameters that influence the rate of peptide acylation within polyesters. Furthermore, it discusses reported strategies to minimize the acylation reaction., (© 2024. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Objective: The study evaluated physicochemical properties of eight different polymeric nanoparticles (NPs) and their interaction with lung barrier and their suitability for pulmonary drug delivery., Methods: Eight physiochemically different NPs were fabricated from Poly lactic-co-glycolic acid (PLGA, PL) and Poly glycerol adipate-co-ω-pentadecalactone (PGA-co-PDL, PG) via emulsification-solvent evaporation. Pulmonary barrier integrity was investigated in vitro using Calu-3 under air-liquid interface. NPs internalization was investigated using a group of pharmacological inhibitors with subsequent microscopic visual confirmation., Results: Eight NPs were successfully formulated from two polymers using emulsion-solvent evaporation; 200, 500 and 800 nm, negatively-charged and positively-charged. All different NPs did not alter tight junctions and PG NPs showed similar behavior to PL NPs, indicating its suitability for pulmonary drug delivery. Active endocytosis uptake mechanisms with physicochemical dependent manner were observed. In addition, NPs internalization and co-localization with lysosomes were visually confirmed indicating their vesicular transport., Conclusion: PG and PL NPs had shown no or low harmful effects on the barrier integrity, and with effective internalization and vesicular transport, thus, prospectively can be designed for pulmonary delivery applications.

This study aimed to evaluate the antimicrobial activity of calcium hydroxide-loaded poly(lactic-co-glycolic acid) nanoparticles (CH-loaded PLGA NPs) on multi-species biofilms. Human root blocks were prepared (n = 40), and multi-species suspensions of Candida albicans, Enterococcus faecalis and Streptococcus gordonii were incubated within the root canals for 21 days. Canals (n = 10/group) were then medicated with saline solution (negative control), chlorhexidine (positive control), calcium hydroxide and CH-loaded PLGA NPs for 7 days. Samples taken from the 0.1 mm root canal dentin were collected, and cell growth was detected by culture on BHI agar. The viable cell count of the Ca(OH) 2 , chlorhexidine gel and CH-loaded PLGA NPs group was significantly lower than the normal saline group (p < 0.001). CH-loaded PLGA NPs demonstrated a significant lower viable cell than Ca(OH) 2 (p < 0.001); it has potential as a medicament for endodontic therapy., (© 2023 Australian Society of Endodontology Inc.)

In an effort to overcome the nasal mucus barrier and epithelial barrier, as well as reduce entry into the bloodstream, we designed RWrNM and DLPC-modified PLGA nanoparticles (PDR-NPs). These nanoparticles were further encapsulated with dexamethasone acetate (Dexac) to form Dexac/PDR-NPs. Transmission electron microscopy (TEM) analysis revealed their spherical shape with an outer lipid layer. Dynamic light scattering (DLS) determined their particle size to be 125.77 ± 2.01 nm, with a polydispersity index (PDI) of 0.139 ± 0.029. The experimental results demonstrate that DLPC-modified PLGA nanoparticles can effectively reduce interactions with mucin at different concentrations, decrease aggregation, and facilitate their crossing of the mucus barrier. Additionally, results from the cellular uptake assay revealed a significantly greater uptake of PDR-NPs by inflammatory RAW 264.7 cells (2.99-fold higher than that of free C6, p < 0.0001) and inflammatory HUVECs (7.20-fold higher than that of free C6, p < 0.0001). Furthermore, Dexac/PDR-NPs effectively reduced the levels of inflammatory factors nitric oxide (NO) (p < 0.001) and interleukin-6 (IL-6) (p < 0.05) in the supernatant of inflammatory RAW 264.7 cells. Intravital imaging of rats revealed that PDR-NPs had a longer residence time in inflamed nasal tissue compared to PD-NPs. Furthermore, in vivo pharmacodynamic experiments showed that Dexac/PDR-NPs effectively reduced the symptoms of nasal inflammation, lowered the pH of nasal secretions, decreased serum inflammatory factor levels (TNF-α and IL-6), and reduced nasal mucosal inflammatory factor levels (IL-1β), while also reducing the degree of inflammation in the nasal mucosa. Both cytotoxicity assays and in vivo results indicate that PDR-NPs have a good safety profile. PDR-NPs not only overcome the nasal mucus barrier but also reduce the systemic toxicities associated with drug entry into the circulation by enhancing the targeting of inflammatory macrophages and inflammatory vascular endothelial cells. PDR-NPs allow for an "open sources and cut costs" treatment strategy to increase drug retention in the inflamed nasal tissues, reducing toxicity and increasing efficacy. In conclusion, PDR-NPs can be a promising drug delivery system for the local treatment of acute rhinosinusitis., (© 2023. Controlled Release Society.)

This study addresses the challenging task of quantitatively investigating drug release from PLGA microspheres after in vivo administration. The objective is to employ Förster resonance energy transfer (FRET) to visualize drug-encapsulated microspheres in both in vitro and in vivo settings. The primary goal is to establish a quantitative correlation between FRET fluorescence changes and microsphere drug release. The study selects drugs with diverse structures and lipid solubility to explore release mechanisms, using PLGA as the matrix material. Clozapine and risperidone serve as model drugs. FRET molecules, Cy5 and Cy5.5, along with Cy7 derivatives, create FRET donor-acceptor pairs. In vitro results show that FRET fluorescence changes align closely with microsphere drug release, particularly for the Cy5.5-Cy7 pair. In vivo experiments involve subcutaneous administration of microspheres to rats, tracking FRET fluorescence changes while collecting blood samples. Pharmacokinetic studies on clozapine and risperidone reveal in vivo absorption fractions using the Loo-Riegelman method. Correlating FRET and in vivo absorption data establishes an in vitro-in vivo relationship (IVIVR). The study demonstrates that FRET-based fluorescence changes quantitatively link to microsphere drug release, offering an innovative method for visualizing and monitoring release in both in vitro and in vivo settings, potentially advancing clinical applications of such formulations., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Ping Hu reports financial support was provided by National Natural Science Foundation of China. Ping Hu reports financial support was provided by Science and Technology Program of Guangzhou, China. Ping Hu reports financial support was provided by Natural Science Foundation of Guangdong Province of China. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Functionally active aligned fibers are a promising approach to enhance neuro adhesion and guide the extension of neurons for peripheral nerve regeneration. Therefore, the present study developed poly(lactic- co -glycolic acid) (PLGA)-aligned electrospun mats and investigated the synergic effect with carbon nanotubes (CNTs) and Choline Bitartrate ionic liquid (Bio-IL) on PLGA fibers. Morphology, thermal, and mechanical performances were determined as well as the hydrolytic degradation and the cytotoxicity. Results revealed that electrospun mats are composed of highly aligned fibers, and CNTs were aligned and homogeneously distributed into the fibers. Bio-IL changed thermal transition behavior, reduced glass transition temperature ( T g ), and favored crystal phase formation. The mechanical properties increased in the presence of CNTs and slightly decreased in the presence of the Bio-IL. The results demonstrated a decrease in the degradation rate in the presence of CNTs, whereas the use of Bio-IL led to an increase in the degradation rate. Cytotoxicity results showed that all the electrospun mats display metabolic activity above 70%, which demonstrates that they are biocompatible. Moreover, superior biocompatibility was observed for the electrospun containing Bio-IL combined with higher amounts of CNTs, showing a high potential to be used in nerve tissue engineering.

Triple-negative breast cancer (TNBC) is considered to be one of the most difficult subtypes of breast cancer (BC) to treat. The sheer absence of certain receptors makes it very tough to target, leaving high-dose chemotherapy as probably the sole therapeutic option at the cost of nonspecific toxic effects. Carnosic acid (CA) has been established as a potential chemotherapeutic agent against a range of cancer cells. However, its in vivo chemotherapeutic potential is significantly challenged due to its poor pharmacokinetic attributes. In this study, poly(lactic- co -glycolic) acid (PLGA) nanoparticles (NPs) were formulated to circumvent the biopharmaceutical limitations of CA. CA-loaded polymeric NPs (CA-PLGA NPs) have been evaluated as a potential therapeutic option in the treatment of TNBC. Different in vitro studies exhibited that CA-PLGA NPs significantly provoked oxidative-stress-mediated apoptotic death in MDA-MB-231 cells. The improved anticancer potential of CA-PLGA NPs over CA was found to be associated with improved cellular uptake of the nanoformulation by TNBC cells. In vivo studies also established the improvement in the chemotherapeutic efficacy of CA-nanoformulation over that of free CA without showing any sign of systemic toxicity. Thus, CA-PLGA NPs emerge as a promising candidate to fix two bugs with a single code, resolving biopharmaceutical attributes of CA as well as introducing a treatment option for TNBC.

Treatment of bone defects remains crucial challenge for successful bone healing, which arouses great interests in designing and fabricating ideal biomaterials. In this regard, the present study focuses on developing a novel fluffy scaffold of poly Lactide-co-glycolide (PLGA) composites with hydroxyapatite (HA) scaffold used in bone defect repair in rabbits. This fluffy PLGA/HA composite scaffold was fabricated by using multi-electro-spinning combined with biomineralization technology. In vitro analysis of human bone marrow mesenchymal stem cells (BMSCs) seeded onto fluffy PLGA/HA composite scaffold showed their ability to adhere, proliferate and cell viability. Transplant of fluffy PLGA/HA composite scaffold in a rabbit model showed a significant increase in mineralized tissue production compared to conventional and fluffy PLGA/HA composite scaffold. These findings are promising for fluffy PLGA/HA composite scaffolds used in bone defects., (© 2024. The Author(s).)

Due to efficient drainage of the joint, the development of intra-articular depots for long-lasting drug release is a difficult challenge. Moreover, a disease-modifying osteoarthritis drug (DMOAD) that can effectively manage osteoarthritis has yet to be identified. The current study was undertaken to explore the potential of injectable, in situ forming implants to create depots that support the sustained release of punicalagin, a promising DMOAD. In vitro experiments demonstrated punicalagin's ability to suppress production of interleukin-1β and prostaglandin E2, confirming its chondroprotective properties. Regarding the entrapment of punicalagin, it was demonstrated by LC-MS/MS to be stable within PLGA in situ forming implants for several weeks and capable of inhibiting collagenase upon release. In vitro punicalagin release kinetics were tunable through variation of solvent, PLGA lactide:glycolide ratio, and polymer concentration, and an optimized formulation supported release for approximately 90 days. The injection force of this formulation steadily increased with plunger advancement and higher rates of advancement were associated with greater forces. Although the optimal formulation was highly cytotoxic to primary chondrocytes if cells were exposed immediately or shortly after implant formation, upwards of 70 % survival was achieved when the implants were first allowed to undergo a 24-72 h period of phase inversion prior to cell exposure. This study demonstrates a PLGA-based in situ forming implant for the controlled release of punicalagin. With modification to address cytotoxicity, such an implant may be suitable as an intra-articular therapy for OA., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The malignancy of the prostate is a complicated ailment which impacts millions of male populations around the globe. Despite the multitude of endeavour accomplished within this domain, modalities that are involved in the ameliorative management of predisposed infirmity are still relent upon non-specific and invasive procedures, thus imposing a detrimental mark on the living standard of the individual. Also, the orchestrated therapeutic interventions are still incompetent in substantiating a robust and unabridged therapeutic end point owing to their inadequate solubility, low bioavailability, limited cell assimilation, and swift deterioration, thereby muffling the clinical application of these existing treatment modalities. Nanotechnology has been employed in an array of modalities for the medical management of malignancies. Among the assortment of available nano-scaffolds, nanocarriers composed of a bio-decomposable and hybrid polymeric material like PLGA hold an opportunity to advance as standard chemotherapeutic modalities. PLGA-based nanocarriers have the prospect to address the drawbacks associated with conventional cancer interventions, owing to their versatility, durability, nontoxic nature, and their ability to facilitate prolonged drug release. This review intends to describe the plethora of evidence-based studies performed to validate the applicability of PLGA nanosystem in the amelioration of prostate malignancies, in conjunction with PLGA focused nano-scaffold in the clinical management of prostate carcinoma. This review seeks to explore numerous evidence-based studies confirming the applicability of PLGA nanosystems in ameliorating prostate malignancies. It also delves into the role of PLGA-focused nano-scaffolds in the clinical management of prostate carcinoma, aiming to provide a comprehensive perspective on these advancements., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

In this study, we investigated the mechanism of curcumin (CUR) release from poly(lactic- co -glycolic acid) (PLGA) and poly(lactic acid) (PLA) nanoparticles (NPs) by evaluating the temperature-dependent CUR release. NPs were prepared by the nanoprecipitation method using various PLGA/PLA polymers with different lactic:glycolic ratios (L:G ratios) and molecular weights. Increasing the polymer molecular weight resulted in a decrease in the particle size of NPs. The wet glass transition temperature ( T g ) of PLGA/PLA NPs was lower than the intrinsic polymer T g , which can be derived from the water absorption and nanosizing of the polymer. The reduction in T g was more significant for the PLGA/PLA NPs with lower polymer L:G ratios and lower polymer molecular weight. The greater decrease of T g in the lower polymer L:G ratios was possibly caused by the higher water absorption due to the more hydrophilic nature of the glycolic acid segment than that of the lactic acid segment. The efficient water absorption in PLGA/PLA NPs with lower molecular weight could cause a significant reduction of T g as it has lower hydrophobicity. CUR release tests from the PLGA/PLA NPs exhibited enhanced CUR release with increasing temperatures, irrespective of polymer species. By fitting the CUR release profiles into mathematical models, the CUR release process was well described by an initial burst release followed by a diffusion-controlled release. The wet T g and particle size of the PLGA/PLA NPs affected the amount and temperature dependence of the initial burst release of CUR. Above the wet T g of NPs, the initial burst release of CUR increased sharply. Smaller particle sizes of PLGA/PLA NPs led to a higher fraction of initial CUR burst release, which was more pronounced above the wet T g of NPs. The wet T g and particle sizes of the PLGA/PLA NPs also influenced the diffusion-controlled CUR release. The diffusion rate of CUR in the NPs increased as the wet T g values of the NPs decreased. The diffusion path length of CUR was affected by the particle size, with larger particle size resulting in a prolonged diffusion-controlled release of CUR. This study highlighted that for the formulation development of PLGA/PLA NPs, suitable PLGA/PLA polymers should be selected considering the physicochemical properties of PLGA/PLA NPs and their correlation with the release behavior of encapsulated drugs at the application temperature.

Long-acting injectables (LAI) offer a cost-effective and patient-centric approach by reducing pill burden and improving compliance, leading to better treatment outcomes. Among various types of long-acting injectables, poly (lactic-co-glycolic acid) (PLGA) microspheres have been extensively investigated and reported in the literature. However, microsphere formulation development is still challenging due to the complexity of PLGA polymer, formulation screening, and processing, as well as time-consuming and cumbersome physicochemical characterization. A further challenge is the limited availability of drug substances in early formulation development. Therefore, there is a need to develop novel and advanced tools that can accelerate the early formulation development. In this manuscript, a novel comprehensive physicochemical characterization approach was developed by integrating Raman microscopy and the machine learning process. The physicochemical properties such as drug loading, particle size and size distribution, content uniformity/heterogeneity, and drug polymorphism of the microspheres can be obtained in a single run, without requiring separate methods for each attribute (e.g., liquid chromatography, particle size analyzer, thermal analysis, X-ray powder diffraction). This approach is non-destructive and can significantly reduce material consumption, sample preparation, labor work, and analysis time/cost, which will greatly facilitate the formulation development of PLGA microsphere products. In addition, the approach will potentially be beneficial in enabling automated high throughput screening of microsphere formulations., (Copyright © 2023. Published by Elsevier B.V.)

Objectives: Despite being an important research topic in oral biomaterials, few studies have demonstrated the differences between poly(d,l-lactide-co-glycolide)/hydroxyapatite (PLGA/HA) and poly(d,l-lactic acid)/hydroxyapatite (PDLLA/HA). In this study, PLGA/HA and PDLLA/HA scaffolds were prepared using three-dimensional (3D) printing technology and implanted into radius defects in rabbits to assess their effects on bone regeneration., Methods: In this study, 6 mm × 4 mm bone defects were generated in the bilateral radii of rabbits. 3D-printed PLGA/HA and PDLLA/HA scaffolds were implanted into the defects. X-ray imaging, micro-computed tomography, and hematoxylin-eosin staining were performed to observe the degradation of the materials, the presence of new bone, and bone remodeling in the bone defect area., Results: The PLGA/HA scaffolds displayed complete degradation at 20 weeks, whereas PDLLA/HA scaffolds exhibited incomplete degradation. Active osteoblasts were detected in both groups. The formation of new bone, bone marrow cavity reconstruction, and cortical bone remodeling were better in the PLGA/HA group than in the PDLLA/HA group., Conclusions: PLGA/HA scaffolds performed better than PDLLA/HA scaffolds in repairing bone defects, making the former scaffolds more suitable as bone substitutes at the same high molecular weight., Competing Interests: Declaration of conflicting interestsThe authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.

Remote loading microencapsulation of peptides into polymer microspheres without organic solvent represents a promising alternative to develop long-acting release depots relative to conventional encapsulation methods. Here, we formulated drug-free microspheres from two kinds of uncapped poly(lactide-co-glycolides) (PLGAs), i.e., ring-opening polymerized Expansorb ® DLG 50-2A (50/50, 11.2 kDa) and Expansorb ® DLG 75-2A (75/25, 9.0 kDa), and evaluated their potential capacity to remote-load and control the release of two model peptides, leuprolide and octreotide. Degradation and erosion kinetics, release mechanism, and storage stability was also assessed. As control formulations, peptide was loaded in the same PLGA 75/25 polymer by the conventional double emulsion-solvent evaporation method (W/O/W) and remote loaded in polycondensation poly(lactic-co-glycolic acid) 75/25 (Wako 7515, 14.3 kDa). Loading content of 6.7%-8.9% w/w (~ 67%-89% encapsulation efficiency (EE)) was attained for octreotide, and that of 9.5% w/w loading (~ 95% EE) was observed for leuprolide, by the remote loading paradigm. Octreotide and leuprolide were both slowly and continuously released in vitro from the remote-loaded Expansorb ® DLG 75-2A MPs for over 56 days, which was highly similar to that observed from traditionally-loaded formulations by W/O/W (8.8% loading, 52.8% EE). The faster release kinetics was observed for the faster degrading PLGA 50/50 remote-loaded Expansorb ® DLG 50-2A MPs relative to microspheres from the PLGA 75/25 Expansorb ® DLG 75-2A. Despite slight differences in degradation kinetics, the release mechanism of octreotide from the Expansorb ® microspheres, whether remote loaded or by W/O/W, was identical as determined by release vs. mass loss curves. Octreotide acylation was also minimal (< ~ 10%) for this polymer. Finally, drug-free Expansorb ® DLG 75-2A MPs displayed excellent storage stability over 3 months. Overall, this work offers support for the use of ring-opening Expansorb ® PLGA-based microspheres to remote load peptides to create simple and effective long-acting release depots., (© 2023. Controlled Release Society.)

Osteoporosis, characterized by an imbalance in bone homeostasis, is a global health concern. Bone defects are difficult to heal in patients with osteoporosis. Classical drug treatments for osteoporotic bone defects have unsatisfactory efficacy owing to side effects and imprecise delivery problems. In this study, a magnetic aggregation-induced bone-targeting poly(lactic-co-glycolic acid, PLGA)-based nanocarrier (ZOL-PLGA@Yoda1/SPIO) is synthesized to realize dual-targeted delivery and precise Piezo1-activated therapy for osteoporotic bone defects. Piezo1 is an important mechanotransducer that plays a key role in regulating bone homeostasis. To achieve dual-targeting properties, ZOL-PLGA@Yoda1/SPIO is fabricated using zoledronate (ZOL)-decorated PLGA, superparamagnetic iron oxide (SPIO), and Piezo1-activated molecule Yoda1 via the emulsion solvent diffusion method. Bone-targeting molecular mediation and magnetic aggregation-induced properties can jointly and effectively achieve precise delivery to localized bone defects. Moreover, Yoda1 loading enables targeted and efficient mimicking of mechanical signals and activation of Piezo1. Experiments in vivo and in vitro demonstrate that ZOL-PLGA@Yoda1/SPIO can activate Piezo1 in bone defect areas of osteoporotic mice, improve osteogenesis through YAP/β-catenin signaling axis, promote a well-coordinated osteogenesis-angiogenesis coupling, and significantly accelerate bone reconstruction within the defects without noticeable side effects. Overall, this novel dual-targeting nanocarrier provides a potentially effective strategy for the clinical treatment of osteoporotic bone defects., (© 2023 Wiley‐VCH GmbH.)

Background: The standard graft material for alveolar cleft repair (ACR) is autogenous iliac crest. A promising alternative potential graft adjunct-newborn human umbilical cord mesenchymal stem cells (h-UCMSCs)-has yet to be explored in vivo. Their capacity for self-renewal, multipotent differentiation, and proliferation allows h-UCMSCs to be harnessed for regenerative medicine. This study sought to evaluate the efficacy of using tissue-derived h-UCMSCs and their osteogenic capabilities to improve ACR in a murine model., Methods: Foxn1 mice were separated into three groups with the following calvarial defects: no treatment (empty defect; n = 6), poly(D,L-lactide-co-glycolide) (PLGA) scaffold ( n = 6), or h-UCMSCs with PLGA ( n = 4). Bilateral 2-mm-diameter parietal bone critical-sized defects were created using a dental drill. Microcomputed tomography (microCT) imaging was performed 1, 2, 3, and 4 weeks postoperatively. The mice were euthanized 4 weeks postoperatively for RNAScope, immunohistochemical, and histological analysis., Results: No mice experienced complications during the follow-up period. MicroCT imaging and histological analysis demonstrated that the no-treatment and PLGA-only defects remained patent without significant defect size differences across groups. In contrast, the h-UCMSCs with PLGA group had significantly greater bone fill on microCT and histological analysis., Conclusions: This study demonstrates a successful calvarial defect model for the investigation of h-UCMSC-mediated osteogenesis and bone repair. Evidence reveals that PLGA alone has neither short-term effects on bone formation nor any unwanted side effects, making it an attractive scaffold. Further investigation using h-UCMSCs with PLGA in larger animals is warranted to advance future translation to patients requiring ACR., Clinical Relevance Statement: The authors' results demonstrate a successful murine calvarial defect model for the investigation of h-UCMSC-mediated osteogenesis and bone repair, and they provide preliminary evidence for the safe and efficacious use of this graft adjunct in alveolar cleft repair., (Copyright © 2023 by the American Society of Plastic Surgeons.)

Neovascular age-related macular degeneration (nAMD) is a leading cause of vision loss in older adults. nAMD is treated with biologics targeting vascular endothelial growth factor; however, many patients do not respond to the current therapy. Here, a small molecule drug, griseofulvin (GRF), is used due to its inhibitory effect on ferrochelatase, an enzyme important for choroidal neovascularization (CNV). For local and sustained delivery to the eyes, GRF is encapsulated in microparticles based on poly(lactide-co-glycolide) (PLGA), a biodegradable polymer with a track record in long-acting formulations. The GRF-loaded PLGA microparticles (GRF MPs) are designed for intravitreal application, considering constraints in size, drug loading content, and drug release kinetics. Magnesium hydroxide is co-encapsulated to enable sustained GRF release over >30 days in phosphate-buffered saline with Tween 80. Incubated in cell culture medium over 30 days, the GRF MPs and the released drug show antiangiogenic effects in retinal endothelial cells. A single intravitreal injection of MPs containing 0.18 µg GRF releases the drug over 6 weeks in vivo to inhibit the progression of laser-induced CNV in mice with no abnormality in the fundus and retina. Intravitreally administered GRF MPs prove effective in preventing CNV, providing proof-of-concept toward a novel, cost-effective nAMD therapy., (© 2023 The Authors. Small published by Wiley-VCH GmbH.)

This study aimed to evaluated the potential of core-shell poly(D, l -lactide- co -glycolide)-chitosan (PLGA-chitosan) nanospheres encapsulating simvastatin (SIM) and doxycycline (DOX) for promoting periodontal and large-sized osseous defects. SIM, and/or DOX were encapsulated in PLGA-chitosan nanospheres using double emulsion technique and were delivered to sites of experimental periodontitis and large-sized mandibular osseous defects of rats for 1–4 weeks. The resultant nanospheres were ~ 200 nm diameter with distinct core-shell structure and released SIM and DOX sustainably for 28 days. DOX and SIM-DOX nanospheres significantly inhibited P. gingivalis and S. sanguinis. In experimental periodontitis sites, SIM-DOX nanospheres significantly down-regulated IL-1b and MMP-8 and significantly reduced bone loss. In mandibular osseous defects, VEGF was up-regulated, and osteogenesis was significantly augmented with SIM nanospheres treatment. In conclusion, core-shell PLGA-chitosan nanospheres released SIM and DOX sustainably. SIM-DOX and SIM nanospheres could be considered to promote the repair of infected periodontal sites and non-infected osseous defects respectively. • PLGA-chitosan nanospheres release simvastatin (SIM)-doxycycline (DOX) sustainably. • DOX and SIM-DOX nanospheres inhibit periodontitis-associated microbiota. • SIM-DOX nanospheres reduce inflammation to assist osseous repair of infected sites. • SIM nanospheres promote angiogenesis and osteogenesis of non-infected defects. [ABSTRACT FROM AUTHOR]

Poly(lactic-co-glycolic acid) (PLGA) is a biocompatible polymer that can gradually and consistently release drugs in a controlled manner. In this study, diclofenac sodium-loaded PLGA nanoparticles (DS-PLGA NPs) were produced by solvent evaporation technique and characterized using SEM, DLS, and zeta potential analyses. The antibacterial and antivirulence potential of DS-PLGA NPs against P. aeruginosa strains were examined using broth microdilution, crystal violet staining, hemolysis, and twitching quantification assays. Furthermore, the expression of the quorum sensing (QS) genes, lasI and lasR in P. aeruginosa strains after treatment with 1/2 MIC of DS-PLGA NPs was assessed using real-time PCR. SEM imaging of the synthesized NPs exhibited that the NPs have a spherical structure with a size range of 60-150 nm. The zeta potential of the NPs was - 15.2 mV, while the size of the particles in the aquatic environment was in a range of 111.5-153.8 nm. The MIC of prepared NPs against various strains of P. aeruginosa ranged from 4.5 to 9 mg/mL. Moreover, exposure of bacteria to sub-MIC of DS-PLGA NPs significantly down-regulated the expression of the lasI and lasR genes to 0.51- and 0.75-fold, respectively. Further, prepared NPs efficiently reduced the biofilm formation of P. aeruginosa strains by 9-27%, compared with the controls. Besides, DS-PLGA NPs showed considerable attenuation in bacterial hemolytic activity by 32-88% and twitching motility by 0-32.3%, compared with untreated cells. Overall, the present work exhibited the anti-QS activity of DS-PLGA NPs, which could be a safe and useful approach for treating P. aeruginosa infections., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Long-acting injectable microspheres have been on the market for more than three decades, but if calculated on the brand name, only 12 products have been approved by the FDA due to numerous challenges in achieving a fully controllable drug release pattern. Recently, more and more researches on the critical factors that determine the release kinetics of microspheres shifted from evaluating the typical physicochemical properties to exploring the microstructure. The microstructure of microspheres mainly includes the spatial distribution and the dispersed state of drug, PLGA and pores, which has been considered as one of the most important characteristics of microspheres, especially when comparative characterization of the microstructure (Q3) has been recommended by the FDA for the bioequivalence assessment. This review extracted the main variables affecting the microstructure formation from microsphere formulation compositions and preparation processes and highlighted the latest advances in microstructure characterization techniques. The further understanding of the microsphere microstructure has significant reference value for the development of long-acting injectable microspheres, particularly for the development of the generic microspheres., Competing Interests: The authors report no conflicts of interest in this work., (© 2024 Wang et al.)

Introduction: Interleukin-10 (IL-10) is a key anti-inflammatory mediator in protecting host from over-exuberant responses to pathogens and play important roles in wound healing, autoimmunity, cancer, and homeostasis. However, its application as a therapeutic agent for biomedical applications has been limited due to its short biological half-life. Therefore, it is important to prolong the half-life of IL-10 to replace the current therapeutic application, which relies on administering large and repeated dosages. Therefore, not a cost-effective approach. Thus, studies that aim to address this type of challenges are always in need., Methods: Recombinant IL-10 was encapsulated in biodegradable nanoparticles (Poly-(Lactic-co-Glycolic Acid) and Chitosan)) by the double emulsion method and then characterized for size, surface charge, thermal stability, cytotoxicity, in vitro release, UV-visible spectroscopy, and Fourier Transform-Infrared Spectroscopy as well as evaluated for its anti-inflammatory effects. Bioactivity of encapsulated IL-10 was evaluated in vitro using J774A.1 macrophage cell-line and in vivo using BALB/c mice. Inflammatory cytokines (IL-6 and TNF-α) were quantified from culture supernatants using specific enzyme-linked immunosorbent assay (ELISA), and significance was analyzed using ANOVA., Results: We obtained a high 96% encapsulation efficiency with smooth encapsulated IL-10 nanoparticles of ~100-150 nm size and release from nanoparticles as measurable to 22 days. Our result demonstrated that encapsulated IL-10 was biocompatible and functional by reducing the inflammatory responses induced by LPS in macrophages. Of significance, we also proved the functionality of encapsulated IL-10 by its capacity to reduce inflammation in BALB/c mice as provoked by Chlamydia trachomatis , an inflammatory sexually transmitted infectious bacterium., Discussion: Collectively, our results show the successful IL-10 encapsulation, slow release to prolong its biological half-life and reduce inflammatory cytokines IL-6 and TNF production in vitro and in mice. Our results serve as proof of concept to further explore the therapeutic prospective of encapsulated IL-10 for biomedical applications, including inflammatory diseases., Competing Interests: The authors report no conflicts of interest in this work., (© 2024 Yilma et al.)

The success of guided bone regeneration (GBR) surgery depends largely on the use of GBR membranes to maintain space for bone regeneration and prevent soft tissue ingrowth. However, currently available commercial degradable GBR membranes are often limited by poor space maintenance ability and require additional suture or nail for fixation. To overcome these limitations, we developed a rapid-shaping, adhesive, and user-friendly GBR membrane (PLGA film-PGN) with long-lasting space maintenance by immersing an electrospun poly(lactide- co -glycolic acid) film in a photo-crosslinkable hydrogel composed of polyethylene glycol diacrylate, gelatin methacryloyl, and nanosilicate (PGN). The PGN hydrogel significantly improved the mechanical strength of the PLGA film-PGN and endowed it with plasticity and adhesive properties, making it more maneuverable. The maximum bending force that the PLGA film-PGN could withstand was over 55 times higher than that of the HEAL ALL film (a commonly used commercial GBR membrane). PLGA film-PGN also promoted the proliferation and osteogenic differentiation of rBMSCs. According to a critical-size rat calvarial defect model, PLGA film-PGN maintained the space within the defect area and significantly enhanced bone formation 4 weeks after the surgery. To conclude, the study provided a novel perspective on GBR membrane design and the multifunctional PLGA film-PGN membrane demonstrated great potential for bone defect reconstruction.

Objectives: To prepare 7-hydroxyethyl chrysin (7-HEC) loaded poly (lactic-co-glycolic acid) (PLGA) nanoparticles and to detect the in vitro release., Methods: The 7-HEC/PLGA nanoparticles were prepared by emulsification solvent volatilization method. The particle size, polydispersity index (PDI), encapsulation rate, drug loading and zeta potential were measured. The prescription was optimized by single factor investigation combined with Box-Behnken response surface method. Mannitol was used as protectant to prepare lyophilized powder, and the optimal formulation was characterized and studied for the in vitro release., Results: The optimal formulation of 7-HEC/PLGA nanoparticles was as follows: drug loading ratio of 2.12∶20, oil-water volume ratio of 1∶14.7, and 2.72% soybean phospholipid as emulsifier. With the optimal formulation, the average particle size of 7-HEC/PLGA nanoparticles was (240.28±0.96) nm, the PDI was 0.25±0.69, the encapsulation rate was (75.74±0.80)%, the drug loading capacity was (6.98±0.83)%, and the potentiostatic potential was (－18.17±0.17) mV. The cumulative in vitro release reached more than 50% within 48 h., Conclusions: The optimized formulation is stable and easy to operate. The prepared 7-HEC/PLGA nanoparticles have uniform particle size, high encapsulation rate and significantly higher dissolution rate than 7-HEC.

This study aimed to develop a nanoparticle drug delivery system using poly (lactic-co-glycolic acid) (PLGA) for enhancing the therapeutic efficacy of lurasidone hydrochloride (LH) in treatment of schizophrenia through intramuscular injection. LH-loaded PLGA nanoparticles (LH-PNPs) were prepared using the nanoprecipitation technique and their physicochemical characteristics were assessed. Particle size (PS), zeta potential, morphology, % encapsulation efficiency, % drug loading, drug content, and solid-state properties were analyzed. Stability, in vitro release, and in vivo pharmacokinetic studies were conducted to evaluate the therapeutic efficacy of the developed LH-PNPs. The optimized batch of LH-PNPs exhibited a narrow and uniform PS distribution before and after lyophilization, with sizes of 112.7 ± 1.8 nm and 115.0 ± 1.3 nm, respectively, and a low polydispersity index. The PNPs showed high drug entrapment efficiency, drug loading, and drug content uniformity. Solid-state characterization indicated good stability and compatibility, with a nonamorphous state. The drug release profile demonstrated sustained release behavior. Intramuscular administration of LH-PNPs in rats resulted in a significantly prolonged mean residence time compared with the drug suspension. These findings highlight that intramuscular delivery of the LH-PNP formulation is a promising approach for enhancing the therapeutic efficacy of LH in treatment of schizophrenia.

Nano-induced endothelial leakiness (NanoEL) can improve the ability of nanoparticles (NPs) to enter the tumor environment, nevertheless, it can inadvertently trigger adverse effects such as tumor metastasis. To overcome these concerns, it becomes important to develop a NPs design strategy that capitalizes on the NanoEL effect while averting unwanted side effects during the drug delivery process. Herein, we introduce the PLGA-ICG-PEI-Ang1@M NP which has a core comprising poly (lactic-co-glycolic acid) (PLGA) and the inner shell with a highly positively charged polyethyleneimine (PEI) and the anti-permeability growth factor Angiopoietin 1 (Ang1), while the outer shell is camouflaged with a Jurkat cell membrane. During the drug delivery process, our NPs exhibit their capability to selectively target and penetrate endothelial cell layers. Once the NPs penetrate the endothelial layer, the proton sponge effect triggered by PEI in the acidic environment surrounding the tumor site can rupture the cell membrane on the NPs' surface. This rupture, in turn, enables the positively charged Ang1 to be released due to the electrostatic repulsion from PEI and the disrupted endothelial layer can be restored. Consequently, the designed NPs can penetrate endothelial layers, promote the cell layer recovery, restrict the tumor metastasis, and facilitate efficient cancer therapy. STATEMENT OF SIGNIFICANCE., Competing Interests: Declaration of Competing Interest The authors declare that they have no conflict of interests in this work., (Copyright © 2023 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

As is the case with other veterinary antibiotics, florfenicol (FFC) faces certain limitations, such as low solubility in water, or the fact that it is reported to interfere with the immune response after some immunoprofilactic actions in livestock. Aiming to improve its efficacy and overall performance, FFC was loaded into a polymeric nanobased delivery system by succesfully using the emulsion-evaporation technique. The poly(lactic-co-glycolic acid) (PLGA) nanoparticles loaded with FFC were characterized in terms of size (101 ± 0.52 nm), zeta potential (26.80 ± 1.30 mV) and poly-dispersity index (0.061 ± 0.019). The achieved loading was 2.24 μg FFC/mg of NPs, with an entrapment efficiency of 7.9%. The antimicrobial effect, the anti-biofilm formation and the cytotoxicity properties of the NPs were evaluated. The results indicated a MIC decreased by ~97.13% for S. aureus, 99.33% for E.coli and 64.1% for P. aeruginosa when compared to free FFC. The minimum inhibitory concentration (MIC) obtained indicated the potential for using a significantly lower dose of florfenicol. The delivery system produced biofilm inhibition while showing no cytotoxic effects when tested on porcine primary fibroblasts and horse mesenchymal stem cells. These findings suggest that florfenicol can be improved and formulations optimized for use in veterinary medicine through its incorporation into a nanobased delivery system designed to release in a controlled manner over time., (© 2023. The Author(s), under exclusive licence to Springer Nature B.V.)

Despite the fact that chemoimmunotherapy has emerged as a key component in the era of cancer immunotherapy, it is challenged by the complex tumor microenvironment (TME) that is jam-packed with cellular and non-cellular immunosuppressive components. The aim of this study was to design a nanoparticulate system capable of sufficiently accumulating in the tumor and spleen to mediate local and systemic immune responses, respectively. The study also aimed to remodel the immunosuppressive TME. For such reasons, multi-functional polylactic-co-glycolic acid (PLGA) nanoparticles (NPs) were engineered to simultaneously eradicate the cancer cells, silence the tumor-associated fibroblasts (TAFs), and re-educate the tumor-associated macrophages (TAMs) using doxorubicin, losartan, and metformin, respectively. These agents were also selected for their ability to tip the balance of the splenic immune cells towards immunostimulatory phenotypes. To establish TAM and TAF cultures, normal macrophages and fibroblasts were incubated with B16F10 melanoma cell (Mel)-derived secretome. Drug-loaded PLGA NPs were prepared, characterized, and tested in the target cell types. Organ distribution of fluorescein-loaded PLGA NPs was evaluated in a mouse model of melanoma. Finally, the local and systemic effects of different combination therapy programs were portrayed. The in vitro studies showed that the drug-loaded PLGA NPs could significantly ablate the immunosuppressive nature of Mel and skew TAMs and TAFs towards more favorable phenotypes. While in vivo, PLGA NPs were proven to exhibit long blood circulation time and to localize preferentially in the tumor and the spleen. The combination of either metformin or losartan with doxorubicin was superior to the monotherapy, both locally and systemically. However, the three-agent combo produced detrimental effects in the form of compromised well-being, immune depletion, and metastasis. These findings indicate the potential of TME remodeling as means to prime the tumors for successful chemoimmunotherapy. In addition, they shed light on the importance of the careful use of combination therapies and the necessity of employing dose-reduction strategies. D-NPs doxorubicin-loaded NPs, M-NPs metformin-loaded NPs, L-NPs losartan-loaded NPs, TAMs tumor-associated macrophages, TAFs tumor-associated fibroblasts, PD-L1 programmed death ligand 1, TNF-α tumor necrosis factor alpha, TGF-β transforming growth factor beta, CD206/40/86 cluster of differentiation 206/40/86, α-SMA alpha-smooth muscle actin, MMPs matrix metalloproteases., (© 2023. The Author(s).)

Purpose: A dissolving microneedle array (dMNA) is a vaccine delivery device with several advantages over conventional needles. By incorporating particulate adjuvants in the form of poly(D,L-lactic-co-glycolic acid) (PLGA) nanoparticles (NPs) into the dMNA, the immune response against the antigen might be enhanced. This study aimed to prepare PLGA-NP-loaded dMNA and to compare T-cell responses induced by either intradermally injected aqueous-PLGA-NP formulation or PLGA-NP-loaded dMNA in mice., Methods: PLGA NPs were prepared with microfluidics, and their physicochemical characteristics with regard to encapsulation efficiencies of ovalbumin (OVA) and CpG oligonucleotide (CpG), zeta potentials, polydispersity indexes, and sizes were analysed. PLGA NPs incorporated dMNA was produced with three different dMNA formulations by using the centrifugation method, and the integrity of PLGA NPs in dMNAs was evaluated. The immunogenicity was evaluated in mice by comparing the T-cell responses induced by dMNA and aqueous formulations containing ovalbumin and CpG (OVA/CpG) with and without PLGA NP., Results: Prepared PLGA NPs had a size of around 100 nm. The dMNA formulations affected the particle integrity, and the dMNA with poly(vinyl alcohol) (PVA) showed almost no aggregation of PLGA NPs. The PLGA:PVA weight ratio of 1:9 resulted in 100% of penetration efficiency and the fastest dissolution in ex-vivo human skin (< 30 min). The aqueous formulation with soluble OVA/CpG and the aqueous-PLGA-NP formulation with OVA/CpG induced the highest CD4 + T-cell responses in blood and spleen cells., Conclusions: PLGA NPs incorporated dMNA was successfully fabricated and the aqueous formulation containing PLGA NPs induce superior CD4 + and CD8 + T-cell responses., (© 2024. The Author(s).)

Random flaps are widely used in the treatment of injuries, tumors, congenital malformations, and other diseases. However, postoperative skin flaps are prone to ischemic necrosis, leading to surgical failure. Insulin-like growth factor- 1(IGF-1) belongs to the IGF family and exerts its growth-promoting effects in various tissues through autocrine or paracrine mechanisms. Its application in skin flaps and other traumatic diseases is relatively limited. Poly (lactic-co-glycolic acid) (PLGA) is a degradable high-molecular-weight organic compound commonly used in biomaterials. This study prepared IGF-PLGA sustained-release microspheres to explore their impact on the survival rate of flaps both in vitro and in vivo, as well as the mechanisms involved. The research results demonstrate that IGF-PLGA has a good sustained-release effect. At the cellular level, it can promote 3T3 cell proliferation by inhibiting oxidative stress, inhibit apoptosis, and enhance the tube formation ability of human umbilical vein endothelial cells (HUVEC) . At the animal level, it accelerates flap healing by promoting vascularization through the inhibition of oxidative stress. Furthermore, this study reveals the role of IGF-PLGA in activating the Angiopoietin-1(Ang1)/Tie2 signaling pathway in promoting flap vascularization, providing a strong theoretical basis and therapeutic target for the application of IGF-1 in flaps and other traumatic diseases., Competing Interests: Declaration of Competing Interest The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

Thymol-loaded PLGA nanoparticles (TH-NPs) were incorporated into different semi-solid formulations using variable gelling agents (carbomer, polysaccharide and poloxamer). The formulations were physicochemically characterized in terms of size, polydispersity index and zeta potential. Moreover, stability studies were performed by analyzing the backscattering profile showing that the gels were able to increase the nanoparticles stability at 4 °C. Moreover, rheological properties showed that all gels were able to increase the viscosity of TH-NPs with the carbomer gels showing the highest values. Moreover, the observation of carbomer dispersed TH-NPs under electron microscopical techniques showed 3D nanometric cross-linked filaments with the NPs found embedded in the threads. In addition, cytotoxicity studies showed that keratinocyte cells in contact with the formulations obtained cell viability values higher than 70 %. Furthermore, antimicrobial efficacy was assessed against C. acnes and S. epidermidis showing that the formulations eliminated the pathogenic C. acnes but preserved the resident S. epidermidis which contributes towards a healthy skin microbiota. Finally, biomechanical properties of TH-NPs dispersed in carbomer gels in contact with healthy human skin were studied showing that they did not alter skin properties and were able to reduce sebum which is increased in acne vulgaris. As a conclusion, TH-NPs dispersed in semi-solid formulations and, especially in carbomer gels, may constitute a suitable solution for the treatment of acne vulgaris., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier B.V. All rights reserved.)

Poly lactic-co-glycolic acid (PLGA) is an ideal polymer for the delivery of small and macromolecule drugs. Conventional preparation methods of PLGA nanoparticles (NPs) result in poor control over NPs properties. In this research, a microfluidic mixer was designed to produce insulin-loaded PLGA NPs with tuned properties. Importantly; aggregation of the NPs through the mixer was diminished due to the coaxial mixing of the precursors. The micromixer allowed for the production of NPs with small size and narrow size distribution compared to the double emulsion solvent evaporation (DESE) method. Furthermore, encapsulation efficiency and loading capacity indicated a significant increase in optimized NPs produced through the microfluidic method in comparison to DESE method. NPs prepared by the microfluidic method were able to achieve a more reduction of trans-epithelial electrical resistance values in the Caco-2 cells compared to those developed by the DESE technique that leads to greater paracellular permeation. Compatibility and interaction between components were evaluated by differential scanning calorimetry and fourier transform infrared analysis. Also, the effect of NPs on cell toxicity was investigated using MTT test. Numerical simulations were conducted to analyze the effect of mixing patterns on the properties of the NPs. It was revealed that by decreasing flow rate ratio, i.e. flow rate of the organic phase to the flow rate of the aqueous phase, mixing of the two streams increases. As an alternative to the DESE method, high flexibility in modulating hydrodynamic conditions of the microfluidic mixer allowed for nanoassembly of NPs with superior insulin encapsulation at smaller particle sizes.

Local delivery of immune-activating agents has shown promise in overcoming an immunosuppressive tumor microenvironment (TME) and stimulating antitumor immune responses in tumors. However, systemic therapy is ultimately needed to treat tumors that are not readily locatable or accessible. To enable systemic delivery of immune-activating agents, we employ poly(lactic- co -glycolide) (PLGA) nanoparticles (NPs) with a track record in systemic application. The surface of PLGA NPs is decorated with adenosine triphosphate (ATP), a damage-associated molecular pattern to recruit antigen-presenting cells (APCs). The ATP-conjugated PLGA NPs (NP pD -ATP) are loaded with paclitaxel (PTX), a chemotherapeutic agent inducing immunogenic cell death to generate tumor antigens in situ . We show that the NP pD -ATP retains ATP activity in hostile TME and provides a stable "find-me" signal to recruit APCs. Therefore, the PTX-loaded NP pD -ATP helps populate antitumor immune cells in TME and attenuate the growth of CT26 and B16F10 tumors better than a mixture of PTX-loaded NP pD and ATP. Combined with anti-PD-1 antibody, PTX-loaded NP pD -ATP achieves complete regression of CT26 tumors followed by antitumor immune memory. This study demonstrates the feasibility of systemic immunotherapy using a PLGA NP formulation that delivers ICD-inducing chemotherapy and an immunostimulatory signal.

Fenofibrate has shown therapeutic effects on diabetic retinopathy. However, fenofibrate can be rapidly cleared from the eye after a single intravitreal injection. Here, we aim to develop fenofibrate loaded PLGA microparticles (Feno-MP) with high drug loading and sustained in vitro release up to 6 months suitable for intravitreal injection. First, orthogonal array experimental design was applied for formulation optimization. The selected formulation parameters were used to formulate Feno-MP using homogenization method and direct membrane emulsification method. Both methods generated Feno-MP with high drug loading and sustained in vitro drug release more than 140 days. Unlike the polydisperse Feno-MP prepared using homogenization method, membrane emulsification method generated Feno-MP with uniform size distribution. By controlling the membrane pore size, 1.5 µm, 8 µm and 16 µm Feno-MP were formulated and we found that larger Feno-MP demonstrated higher drug loading, more sustained drug release in vitro with less burst drug release than the smaller Feno-MP. In conclusion, we developed Feno-MP with high drug loading and sustained release profile, and elucidated that changing the particle size could have notable impacts on drug loading and release kinetics. Formulating Feno-MP with uniform size distribution by membrane emulsification method would benefit the batch-to-batch repeatability., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: The fenofibrate microparticles described in this publication have been filed as patent applications through Virginia Commonwealth University (VCU). Tuo Meng, Jian-xing Ma and Qingguo Xu are the co-inventors, which are subject to certain rules and restrictions under VCU policy. The terms of this arrangement are being managed by VCU in accordance with its conflict of interest policies., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Nanomedicine has brought significant advancements to healthcare by utilizing nanotechnology in medicine. Despite much promise, the further development of nanocarriers for clinical use has been hindered by a lack of understanding and visualization of nano-bio interactions. Conventional imaging methods have limitations in resolution, sensitivity, and specificity. This study introduces a label-free optical approach using stimulated Raman scattering (SRS) microscopy to image poly(lactic- co -glycolic acid) (PLGA) nanocarriers, the most widely used polymeric nanocarrier for delivery therapeutic agents, with single-particle sensitivity and quantification capabilities. A unique Raman peak was identified for PLGA ester, enabling generalized bio-orthogonal bond imaging. We demonstrated quantitative SRS imaging of PLGA nanocarriers across different biological systems from cells to animal tissues. This label-free imaging method provides a powerful tool for studying this prevalent nanocarrier and quantitatively visualizing their distribution, interaction, and clearance in vivo.