Search

Your search keyword '"Pisarska, Joanna"' showing total 291 results
Start Over Author "Pisarska, Joanna" Language english
291 results on '"Pisarska, Joanna"'

27. EFFICIENT GREEN UPCONVERSION EMISSION IN TRANSPARENT TEO2-GEO2 GLASS-CERAMIC OBTAINED BY BILLET EXTRUSION.

Author

Lesniak, Magdalena, Jiménez, Lesly G., Starzyk, Bartłomiej, Szymczak, Patryk, Vázquez-López, Carlos, Kochanowicz, Marcin, Kuwik, Marta, Pisarska, Joanna, Pisarski, Wojciech A., and Dorosz, Dominik

Subjects
GLASS-ceramics, PHOTON upconversion, TRANSMISSION electron microscopes, GLASS transitions, X-ray diffraction
Abstract

Transparent Yb3+/Er3+ glass-ceramic was successfully obtained by the extrusion method. The extrusion of oxyfluoride tellurite-germanate glass co-doped with Yb3+ and Er3+ ions at 520 ℃ resulted in the formation of Ba0.75Er0.25F2.25 nanocrystals, leading to an increase in the upconversion (UC) emission intensity of 35 times in glass-ceramic with respect to the glass. The glass to glass-ceramic transition was confirmed by X-ray diffraction (XRD) and Transmission electron microscope (TEM). Also, the structural changes that occurred during crystallization were assessed using Fourier-transform infrared (FTIR) spectroscopy. Furthermore, the pump power and temperature UC emission dependence of glass and glass-ceramic under 976 nm laser excitation were investigated in detail. The assessments showed that i) two-phonons are involved in the UC process and ii) the temperature has a significant influence over it. The Yb3+/Er3+ codoped glass-ceramic shows relatively high Sa and Sr values in a wide temperature range from 300 to 573 K, presenting the maximal Sa value of 3.50 × 10-3 at 573 K and the maximal Sr value of 6.30 × 10-3 at 364 K. These results suggest that the glass-ceramic is a good candidate for optical applications such as luminescent thermometry. [ABSTRACT FROM AUTHOR]

Published
2024
Full Text
View/download PDF

28. Broadband Profiled Eye-Safe Emission of LMA Silica Fiber Doped with Tm 3+ /Ho 3+ Ions.

Author

Miluski, Piotr, Markowski, Krzysztof, Kochanowicz, Marcin, Łodziński, Marek, Pisarski, Wojciech A., Pisarska, Joanna, Kuwik, Marta, Leśniak, Magdalena, Dorosz, Dominik, Żmojda, Jacek, Ragiń, Tomasz, and Dorosz, Jan

Subjects
RARE earth oxides, OPTICAL fibers, POWER density, REFRACTIVE index, RADIATION sources, SILICA fibers
Abstract

LMA (Large Mode Area) optical fibers are presently under active investigation to explore their potential for generating laser action or broadband emission directly within the optical fiber structure. Additionally, a wide mode profile significantly reduces the power distribution density in the fiber cross-section, minimizing the power density, photodegradation, or thermal damage. Multi-stage deposition in the MCVD-CDT system was used to obtain the structural doping profile of the LMA fiber multi-ring core doped with Tm3+ and Tm3+/Ho3+ layer profiles. The low alumina content (Al2O3: 0.03wt%) results in low refractive index modification. The maximum concentrations of the lanthanide oxides were Tm2O3: 0.18wt % and Ho2O3: 0.15wt%. The double-clad construction of optical fiber with emission spectra in the eye-safe spectral range of (1.55–2.10 µm). The calculated LP01 Mode Field Diameter (MFD) was 69.7 µm (@ 2000 nm, and 1/e of maximum intensity), which confirms LMA fundamental mode guiding conditions. The FWHM and λmax vs. fiber length are presented and analyzed as a luminescence profile modification. The proposed structured optical fiber with a ring core can be used in new broadband optical radiation source designs. [ABSTRACT FROM AUTHOR]

Published
2023
Full Text
View/download PDF

29. Experimental and theoretical studies on NIR luminescence of titanate‐germanate glasses doped with Pr3+ and Tm3+ ions.

Author

Kuwik, Marta, Kowalska, Karolina, Pisarska, Joanna, and Pisarski, Wojciech A.

Subjects
LUMINESCENCE measurement, LUMINESCENCE, OPTICAL amplifiers, BROADBAND amplifiers, QUANTUM efficiency, NEAR infrared radiation, FIBER lasers
Abstract

Near‐infrared (NIR) luminescence of Pr3+ and Tm3+ ions in titanate‐germanate glasses has been studied for laser and fiber amplifier applications. The effect of the molar ratio GeO2:TiO2 (from 5:1 to 1:5) on spectroscopic properties of glass systems was studied by absorption, luminescence measurements, and theoretical calculations using the Judd–Ofelt theory. It was found that independent of the TiO2 concentration, intense NIR emissions at 1.5 and 1.8 μm were observed for glasses doped with Pr3+ and Tm3+ ions, respectively. Moreover, several spectroscopic and NIR laser parameters for Pr3+ and Tm3+ ions, such as emission bandwidth, stimulated emission cross‐section, quantum efficiency, gain bandwidth, and figure of merit, were determined. The results were discussed in detail and compared to the different laser glasses. Systematic investigations indicate that Pr3+‐doped system with GeO2:TiO2 = 2:1 and Tm3+‐doped glass with GeO2:TiO2 = 1:2 present profit laser parameters and could be successfully applied to NIR lasers and broadband optical amplifiers. [ABSTRACT FROM AUTHOR]

Published
2023
Full Text
View/download PDF

42. Tm3+/Ho3+ profiled co-doped core area optical fiber for emission in the range of 1.6–2.1 µm.

Author

Miluski, Piotr, Markowski, Krzysztof, Kochanowicz, Marcin, Łodziński, Marek, Żmojda, Jacek, Pisarski, Wojciech A., Pisarska, Joanna, Kuwik, Marta, Leśniak, Magdalena, Dorosz, Dominik, Ragiń, Tomasz, Askirka, Valiantsin, and Dorosz, Jan

Subjects
OPTICAL fiber cladding, OPTICAL fibers, DOPING agents (Chemistry), NUMERICAL apertures, CHEMICAL vapor deposition, HOLMIUM, THULIUM, MOLECULAR spectra
Abstract

Double-clad optical fiber with a multi-ring core profile doped with thulium and holmium fabricated by Modified Chemical Vapor Deposition Chelate Doping Technology (MCVD-CDT) is presented. The measured Tm2O3 and Ho2O3 complexes' weight concentrations were 0.5% and 0.2% respectively. Numerical analyses show weakly guiding conditions and 42.2 µm of MFD LP01 at 2000 nm. The low NA numerical aperture (NA = 0.054) was obtained for the 20/250 µm core/cladding ratio optical fiber construction. The emission spectra in the range of 1.6–2.1 µm vs. the fiber length are presented. The full width at half maximum (FWHM) decreases from 318 to 270 nm for fiber lengths from 2 to 10 m. The presented fiber design is of interest for the development of new construction of optical fibers operating in the eye-safe spectral range. [ABSTRACT FROM AUTHOR]

Published
2023
Full Text
View/download PDF

Catalog

Books, media, physical & digital resources
See catalog results