Search

We report the implementation of a near-quantum-limited, traveling-wave parametric amplifier that uses three-wave mixing (3WM). To favor amplification by 3WM, we use the superconducting nonlinear asymmetric inductive element (SNAIL) loops, biased with a dc magnetic flux. In addition, we equip the device with dispersion engineering features to create a stop-band at the second harmonic of the pump and suppress the propagation of the higher harmonics that otherwise degrade the amplification. With a chain of 440 SNAILs, the amplifier provides up to 20 dB gain and a 3-dB bandwidth of 1 GHz. The added noise by the amplifier is found to be less than one photon., 6 pages, 6 figures

Hosting non-classical states of light in three-dimensional microwave cavities has emerged as a promising paradigm for continuous-variable quantum information processing. Here we experimentally demonstrate high-fidelity generation of a range of Wigner-negative states useful for quantum computation, such as Schr\"{o}dinger-cat states, binomial states, Gottesman-Kitaev-Preskill (GKP) states, as well as cubic phase states. The latter states have been long sought after in quantum optics and were never achieved experimentally before. To do so, we use a sequence of interleaved selective number-dependent arbitrary phase (SNAP) gates and displacements. We optimize the state preparation in two steps. First we use a gradient-descent algorithm to optimize the parameters of the SNAP and displacement gates. Then we optimize the envelope of the pulses implementing the SNAP gates. Our results show that this way of creating highly non-classical states in a harmonic oscillator is robust to fluctuations of the system parameters such as the qubit frequency and the dispersive shift.

We benchmark the decoherence of superconducting qubits to examine the temporal stability of energy-relaxation and dephasing. By collecting statistics during measurements spanning multiple days, we find the mean parameters $\overline{T_{1}}$ = 49 $\mu$s and $\overline{T_{2}^{*}}$ = 95 $\mu$s, however, both of these quantities fluctuate explaining the need for frequent re-calibration in qubit setups. Our main finding is that fluctuations in qubit relaxation are local to the qubit and are caused by instabilities of near-resonant two-level-systems (TLS). Through statistical analysis, we determine switching rates of these TLS and observe the coherent coupling between an individual TLS and a transmon qubit. Finally, we find evidence that the qubit's frequency stability is limited by capacitance noise. Importantly, this produces a 0.8 ms limit on the pure dephasing which we also observe. Collectively, these findings raise the need for performing qubit metrology to examine the reproducibility of qubit parameters, where these fluctuations could affect qubit gate fidelity., Comment: 15 pages ArXiv version rev2

We investigate three types of amplification processes for light fields coupling to an atom near the end of a one-dimensional (1D) semi-infinite waveguide. We consider two setups where a drive creates population inversion in the bare or dressed basis of a three-level atom and one setup where the amplification is due to higher-order processes in a driven two-level atom. In all cases, the end of the waveguide acts as a mirror for the light. We find that this enhances the amplification in two ways compared to the same setups in an open waveguide. Firstly, the mirror forces all output from the atom to travel in one direction instead of being split up into two output channels. Secondly, interference due to the mirror enables tuning of the ratio of relaxation rates for different transitions in the atom to increase population inversion. We quantify the enhancement in amplification due to these factors and show that it can be demonstrated for standard parameters in experiments with superconducting quantum circuits.

Exploiting multiple modes in a quantum acoustic device could enable applications in quantum information in a hardware-efficient setup, including quantum simulation in a synthetic dimension and continuous-variable quantum computing with cluster states.We develop a multimode surface acoustic wave (SAW) resonator with a superconducting quantum interference device (SQUID) integrated in one of the Bragg reflectors. The interaction with the SQUID-shunted mirror gives rise to coupling between the more than 20 accessible resonator modes. We exploit this coupling to demonstrate two-mode squeezing of SAW phonons, as well as four-mode multipartite entanglement. Our results open avenues for continuous-variable quantum computing in a compact hybrid quantum system.

Microscopic two-level system (TLS) defects at dielectric surfaces and interfaces are among the dominant sources of loss in superconducting quantum circuits, and their properties have been extensively probed using superconducting resonators and qubits. We report on spectroscopy of TLSs coupling to the strain field in a surface acoustic wave (SAW) resonator. The narrow free spectral range of the resonator allows for two-tone spectroscopy where a strong pump is applied at one resonance, while a weak signal is used to probe a different mode. We map the spectral hole burnt by the pump tone as a function of frequency and extract parameters of the TLS ensemble. Our results suggest that detuned acoustic pumping can be used to enhance the coherence of superconducting devices by saturating TLSs.

Present-day, noisy, small or intermediate-scale quantum processors---although far from fault-tolerant---support the execution of heuristic quantum algorithms, which might enable a quantum advantage, for example, when applied to combinatorial optimization problems. On small-scale quantum processors, validations of such algorithms serve as important technology demonstrators. We implement the quantum approximate optimization algorithm (QAOA) on our hardware platform, consisting of two superconducting transmon qubits and one parametrically modulated coupler. We solve small instances of the NP-complete exact-cover problem, with 96.6% success probability, by iterating the algorithm up to level two., 9 pages, 7 figures

We numerically and experimentally investigate the phononic loss for superconducting resonators fabricated on a piezoelectric substrate. With the help of finite element method simulations, we calculate the energy loss due to electromechanical conversion into bulk and surface acoustic waves. This sets an upper limit for the resonator internal quality factor Q i. To validate the simulation, we fabricate quarter wavelength coplanar waveguide resonators on GaAs and measure Q i as function of frequency, power and temperature. We observe a linear increase of Q i with frequency, as predicted by the simulations for a constant electromechanical coupling. Additionally, Q i shows a weak power dependence and a negligible temperature dependence around 10 mK, excluding two level systems and non-equilibrium quasiparticles as the main source of losses at that temperature.

We explore routing of propagating phonons in analogy with previous experiments on photons. Surface acoustic waves (SAWs) in the microwave regime are scattered by a superconducting transmon qubit. The transmon can be tuned on or off resonance with the incident SAW field using an external magnetic field or the Autler-Townes effect, and thus the reflection and transmission of the SAW field can be controlled in time. We observe 80% extinction in the transmission of the low power continuous signal and a 40 ns rise time of the router. The slow propagation speed of SAWs on solid surfaces allows for in-flight manipulations of the propagating phonons. The ability to route short, 100 ns, pulses enables new functionality, for instance to catch an acoustic phonon between two qubits and then release it in a controlled direction., 10 pages, 11 figures put into 4 figures, 1 table

Today, surface acoustic waves (SAWs) and bulk acoustic waves are already two of the very few phononic technologies of industrial relevance and can been found in a myriad of devices employing these nanoscale earthquakes on a chip. Acoustic radio frequency filters, for instance, are integral parts of wireless devices. SAWs in particular find applications in life sciences and microfluidics for sensing and mixing of tiny amounts of liquids. In addition to this continuously growing number of applications, SAWs are ideally suited to probe and control elementary excitations in condensed matter at the limit of single quantum excitations. Even collective excitations, classical or quantum are nowadays coherently interfaced by SAWs. This wide, highly diverse, interdisciplinary and continuously expanding spectrum literally unites advanced sensing and manipulation applications. Remarkably, SAW technology is inherently multiscale and spans from single atomic or nanoscopic units up even to the millimeter scale. The aim of this Roadmap is to present a snapshot of the present state of surface acoustic wave science and technology in 2019 and provide an opinion on the challenges and opportunities that the future holds from a group of renown experts, covering the interdisciplinary key areas, ranging from fundamental quantum effects to practical applications of acoustic devices in life science.

We present an experimental demonstration as well as a theoretical model of an integrated circuit designed for the manipulation of a microwave field down to the single-photon level. The device is made of a superconducting resonator coupled to a transmission line via a second frequency-tunable resonator. The tunable resonator can be used as a tunable coupler between the fixed resonator and the transmission line. Moreover, the manipulation of the microwave field between the two resonators is possible. In particular, we demonstrate the swapping of the field from one resonator to the other by pulsing the frequency detuning between the two resonators. The behavior of the system, which determines how the device can be operated, is analyzed as a function of one key parameter of the system, the damping ratio of the coupled resonators. We show a good agreement between experiments and simulations, realized by solving a set of coupled differential equations., 10 pages, 6 figures

We investigate nondegenerate parametric oscillations in a multimode superconducting microwave resonator that is terminated by a SQUID. The parametric effect is achieved by modulating magnetic flux through the SQUID at a frequency close to the sum of two resonator-mode frequencies. For modulation amplitudes exceeding an instability threshold, self-sustained oscillations are observed in both modes. The amplitudes of these oscillations show good quantitative agreement with a theoretical model. The oscillation phases are found to be correlated and exhibit strong fluctuations which broaden the oscillation spectral linewidths. These linewidths are significantly reduced by applying a weak on-resonance tone, which also suppresses the phase fluctuations. When the weak tone is detuned, we observe synchronization of the oscillation frequency with the frequency of the input. For the detuned input, we also observe an emergence of three idlers in the output. This observation is in agreement with theory indicating four-mode amplification and squeezing of a coherent input., 7 pages, 8 figures

We have observed period-tripling subharmonic oscillations, in a superconducting coplanar waveguide resonator operated in the quantum regime, $k_B T \ll \hbar\omega$. The resonator is terminated by a tunable inductance that provides a Kerr-type nonlinearity. We detected the output field quadratures at frequencies near the fundamental mode, $\omega/2\pi \sim 5\,$GHz, when the resonator was driven by a current at $3\omega$ with an amplitude exceeding an instability threshold. The output radiation was red-detuned from the fundamental mode. We observed three stable radiative states with equal amplitudes and phase-shifted by $120^\circ$. The downconversion from $3\omega$ to $\omega$ is strongly enhanced by resonant excitation of the second mode of the resonator, and the cross-Kerr effect. Our experimental results are in quantitative agreement with a model for the driven dynamics of two coupled modes.

The conversion efficiency of electric microwave signals into surface acoustic waves in different types of superconducting transducers is studied with the aim of quantum applications. We compare delay lines containing either conventional symmetric transducers (IDTs) or unidirectional transducers (UDTs) at 2.3 GHz and 10 mK. The UDT delay lines improve the insertion loss with 4.7 dB and a directivity of 22 dB is found for each UDT, indicating that 99.4 % of the acoustic power goes in the desired direction. The power lost in the undesired direction accounts for more than 90 % of the total loss in IDT delay lines, but only ~3 % percent of the total loss in the FEUDT delay lines., 4 pages (5 including references), 3 figures

We propose two different setups to generate single photons on demand using an atom in front of a mirror, along with either a beam-splitter or a tunable coupling. We show that photon generation efficiency ~99% is straightforward to achieve. The proposed schemes are simple and easily tunable in frequency. The operation is relatively insensitive to dephasing and can be easily extended to generate correlated pairs of photons. They can also in principle be used to generate any photonic qubit of the form $\mu |0 \rangle + \nu |1\rangle$ in arbitrary wave-packets, making them very attractive for quantum communication applications., Comment: 10 pages, Added appendix

We show that the physics underlying the dynamical Casimir effect may generate multipartite quantum correlations. To achieve it, we propose a circuit quantum electrodynamics (cQED) scenario involving superconducting quantum interference devices (SQUIDs), cavities, and superconducting qubits, also called artificial atoms. Our results predict the generation of highly entangled states for two and three superconducting qubits in different geometric configurations with realistic parameters. This proposal paves the way for a scalable method of multipartite entanglement generation in cavity networks through dynamical Casimir physics., Improved version and references added. Accepted for publication in Physical Review Letters

We present a system which allows to tune the coupling between a superconducting resonator and a transmission line. This storage resonator is addressed through a second, coupling resonator, which is frequency-tunable and controlled by a magnetic flux applied to a superconducting quantum interference device (SQUID). We experimentally demonstrate that the lifetime of the storage resonator can be tuned by more than three orders of magnitude. A field can be stored for 18 {\mu}s when the coupling resonator is tuned off resonance and it can be released in 14 ns when the coupling resonator is tuned on resonance. The device allows capture, storage, and on-demand release of microwaves at a tunable rate., Comment: 5 pages, 3 figures

A Superconducting QUantum Interference Device (SQUID) modulated by a fast oscillating magnetic flux can be used as a parametric amplifier, providing gain with very little added noise. Here, we develop linearized models to describe the parametrically flux-pumped SQUID in terms of an impedance. An unpumped SQUID acts as an inductance, the Josephson inductance, whereas a flux-pumped SQUID develops an additional, parallel element which we have coined the ``pumpistor.'' Parametric gain can be understood as a result of a negative resistance of the pumpistor. In the degenerate case, the gain is sensitive to the relative phase between the pump and signal. In the nondegenerate case, gain is independent of this phase. We develop our models first for degenerate parametric pumping in the three-wave and four-wave cases, where the pump frequency is either twice or equal to the signal frequency, respectively. We then derive expressions for the nondegenerate case where the pump frequency is not a multiple of the signal frequency, where it becomes necessary to consider idler tones which develop. For the nondegenerate three-wave case, we present an intuitive picture for a parametric amplifier containing a flux-pumped SQUID where current at the signal frequency depends upon the load impedance at an idler frequency. This understanding provides insight and readily testable predictions of circuits containing flux-pumped SQUIDs., Comment: 27 pages, 6 figures, 1 table

We present an extensive experimental and theoretical study of the proximity effect in InAs nanowires connected to superconducting electrodes. We fabricate and investigate devices with suspended gate-controlled nanowires and nonsuspended nanowires, with a broad range of lengths and normal-state resistances. We analyze the main features of the current-voltage characteristics: the Josephson current, excess current, and subgap current as functions of length, temperature, magnetic field, and gate voltage, and compare them with theory. The Josephson critical current for a short-length device, L = 30 nm, exhibits a record high magnitude of 800 nA at low temperature that comes close to the theoretically expected value. The critical current in all other devices is typically reduced compared to the theoretical values. The excess current is consistent with the normal resistance data and agrees well with the theory. The subgap current shows a large number of structures; some of them are identified as subharmonic gap structures generated by multiple Andreev reflection. The other structures, detected in both suspended and nonsuspended devices, have the form of voltage steps at voltages that are independent of either the superconducting gap or length of the wire. By varying the gate voltage in suspended devices, we are able to observe a crossover from typical tunneling transport at large negative gate voltage, with suppressed subgap current and negative excess current, to pronounced proximity junction behavior at large positive gate voltage, with enhanced Josephson current and subgap conductance as well as a large positive excess current., 12 pages, 15 figures

We experimentally study the behavior of a parametrically pumped nonlinear oscillator, which is based on a superconducting quarter wavelength resonator, and is terminated by a flux-tunable superconducting quantum interference device. We extract parameters for two devices. In particular, we study the effect of the nonlinearities in the system and compare to theory. The Duffing nonlinearity is determined from the probe-power dependent frequency shift of the oscillator, and the nonlinearity related to the parametric flux pumping, is determined from the pump amplitude for the onset of parametric oscillations. Both nonlinearities depend on the parameters of the device and can be tuned in situ by the applied dc flux. We also suggest how to cancel the effect of by adding a small dc flux and a pump tone at twice the pump frequency.

We investigate quantum correlations in microwave radiation produced by the dynamical Casimir effect in a superconducting waveguide terminated and modulated by a superconducting quantum interference device. We apply nonclassicality tests and evaluate the entanglement for the predicted field states. For realistic circuit parameters, including thermal background noise, the results indicate that the produced radiation can be strictly nonclassical and can have a measurable amount of intermode entanglement. If measured experimentally, these nonclassicalilty indicators could give further evidence of the quantum nature of the dynamical Casimir radiation in these circuits., Comment: 5 pages, 3 figures

We address recent advances in microwave quantum optics with artificial atoms in one-dimensional (1D) open space. This field relies on the fact that the coupling between a superconducting artificial atom and propagating microwave photons in a 1D open transmission line can be made strong enough to observe quantum coherent effects, without using any cavity to confine the microwave photons. We investigate the scattering properties in such a system with resonant coherent microwaves. We observe the strong nonlinearity of the artificial atom and under strong driving we observe the Mollow triplet. By applying two resonant tones, we also observe the Autler-Townes splitting. Exploiting these effects, we demonstrate two quantum devices at the single-photon level in the microwave regime: the single-photon router and the photon-number filter. These devices provide important steps toward the realization of an on-chip quantum network. © IOP Publishing and Deutsche Physikalische Gesellschaft., We acknowledge financial support from the EU through the ERC and the project PROMISCE, from the Swedish Research Council and from the Wallenberg Foundation. B P acknowledges support from the CSIC grant JAE-PREDOC2009.

Measurements of the temperature and bias dependence of single-electron transistors (SETs) in a dilution refrigerator show that charge noise increases linearly with refrigerator temperature above a voltage-dependent threshold temperature, and that its low-temperature saturation is due to SET self-heating. We show further that the two-level fluctuators responsible for charge noise are in strong thermal contact with the electrons in the SET, which can be at a much higher temperature than the substrate. We suggest that the noise is caused by electrons tunneling between the SET metal and nearby potential wells.

We present measurements on hybrid single-electron turnstiles with superconducting leads contacting a normal island (SINIS). We observe Andreev tunneling of electrons influencing the current plateau characteristics of the turnstiles under radio-frequency pumping. The data is well accounted for by numerical simulations. We verify the dependence of the Andreev tunneling rate on the turnstile's charging energy. Increasing the charging energy effectively suppresses the Andreev current., 6 pages, 4 figures, 1 table Published version with various improvements to figures and text

We have fabricated a single Cooper-pair box (SCB) together with an on-chip lumped element resonator. By utilizing the quantum capacitance of the SCB, its state can be read out by detecting the phase of a radio-frequency (rf) signal reflected off the resonator. The resonator was optimized for fast readout. By studying quasiparticle tunneling events in the SCB, we have characterized the performance of the readout and found that we can perform a single shot parity measurement in approximately 50 ns. This is an order of magnitude faster than previously reported measurements., 7 pages, 5 figures

We study relaxation and dephasing in a strongly driven two-level system interacting with its environment. We develop a theory which gives a straightforward physical picture of the complex dynamics of the system in terms of dressed states. In addition to the dressing of the energy diagram, we describe the dressing of relaxation and dephasing. We find a good quantitative agreement between the theoretical calculations and measurements of a superconducting qubit driven by an intense microwave field. The competition of various processes leads to a rich structure in the observed behavior, including signatures of population inversion., 5 pages, 2 figures