Search

Pharmacy compounding, the art and science of preparing customized medications to meet individual patient needs, is on the verge of transformation. Traditional methods of compounding often involve manual and time-consuming processes, presenting challenges in terms of consistency, dosage accuracy, quality control, contamination, and scalability. However, the emergence of cutting-edge technologies has paved a way for a new era for pharmacy compounding, promising to redefine the way medications are prepared and delivered as pharmacy-tailored personalized medicines. In this multi-site study, more than 30 hospitals and community pharmacies from eight countries in Europe utilized a novel automated dosing approach inspired by 3D printing for the compounding of non-sterile propranolol hydrochloride tablets. CuraBlend® excipient base, a GMP-manufactured excipient base (pharma-ink) intended for automated compounding applications, was used. A standardized study protocol to test the automated dosing of tablets with variable weights was performed in all participating pharmacies in four different iterative phases. Integrated quality control was performed with an in-process scale and NIR spectroscopy supported by HPLC content uniformity measurements. In total, 6088 propranolol tablets were produced at different locations during this study. It was shown that the dosing accuracy of the process increased from about 90% to 100% from Phase 1 to Phase 4 by making improvements to the formulation and the hardware solutions. The results indicate that through this automated and quality controlled compounding approach, extemporaneous pharmacy manufacturing can take a giant leap forward towards automation and digital manufacture of dosage forms in hospital pharmacies and compounding pharmacies. [ABSTRACT FROM AUTHOR]

Electrospinning is an effective method in preparing polymeric nanofibrous drug delivery systems (DDSs) for topical wound healing and skin burn therapy applications. The aim of the present study was to investigate a new synthetic graft copolymer (Soluplus) as a hydrophilic carrier polymer in electrospinning of nanofibrous DDSs. Soluplus (polyvinyl caprolactam-polyvinyl acetatepolyethylene glycol graft copolymer (PCL-PVAc-PEG)) was applied in the nonwoven nanomats loaded with piroxicam (PRX) as a poorly water-soluble drug. Raman spectroscopy, X-ray powder diffraction, differential scanning calorimetry, and scanning electron microscopy (SEM) were used in the physical characterization of nanofibrous DDSs. According to the SEM results, the drug-loaded PCL-PVAc-PEG nanofibers were circular in cross-section with an average diameter ranging from 500nm up to 2 μ;m. Electrospinning stabilized the amorphous state of PRX. In addition, consistent and sustained-release profile was achieved with the present nanofibrous DDSs at the physiologically relevant temperature and pH applicable in wound healing therapy. In conclusion, electrospinning can be used to prepare nanofibrous DDSs of PCL-PVAc-PEG graft copolymer (Soluplus) and to stabilize the amorphous state of a poorly water-soluble PRX. The use of this synthetic graft copolymer can open new options to formulate nanofibrous DDSs for wound healing. [ABSTRACT FROM AUTHOR]

Variations in the essential oil composition of Thymus serpyllum L., growing wild in Estonia (33 samples) and in some other countries (Russia, Latvia and Armenia, seven samples) were determined. The oil were obtained from Estonia (46 samples) in yields 0.6-4.4 and 1.9-8.2 mL kg-1 in other countries. The T. serpyllum herb grown in Estonia usually did not confirmed to the EP standard in the aspect of the essential oil contents (3.0 mL kg-1). Variations in the essential oil composition of wild thyme were studied using capillary gas chromatographic methods. A total of 94 components were identified. Thymol and carvacrol, mentioned in literature as principial components, are not the main components of the essential oil of wild thyme growing in Estonia. (E)-nerolidol, caryophyllene oxide, myrcene and borneol chemotypes of wild thyme drug are distinguishable. The chemical composition of samples from Russia, Latvia and Armenia is very variable. [ABSTRACT FROM AUTHOR]

Berberine (BBR) is a poorly water-soluble quaternary isoquinoline alkaloid of plant origin with potential uses in the drug therapy of hypercholesterolemia. To tackle the limitations associated with the oral therapeutic use of BBR (such as a first-pass metabolism and poor absorption), BBR-loaded liposomes were fabricated by ethanol-injection and thin-film hydration methods. The size and size distribution, polydispersity index (PDI), solid-state properties, entrapment efficiency (EE) and in vitro drug release of liposomes were investigated. The BBR-loaded liposomes prepared by ethanol-injection and thin-film hydration methods presented an average liposome size ranging from 50 nm to 244 nm and from 111 nm to 449 nm, respectively. The PDI values for the liposomes were less than 0.3, suggesting a narrow size distribution. The EE of liposomes ranged from 56% to 92%. Poorly water-soluble BBR was found to accumulate in the bi-layered phospholipid membrane of the liposomes prepared by the thin-film hydration method. The BBR-loaded liposomes generated by both nanofabrication methods presented extended drug release behavior in vitro. In conclusion, both ethanol-injection and thin-film hydration nanofabrication methods are feasible for generating BBR-loaded oral liposomes with a uniform size, high EE and modified drug release behavior in vitro. [ABSTRACT FROM AUTHOR]

We investigated and monitored in situ the wetting and dissolution properties of polymeric nanofibers and determined the solid-state of a drug during dissolution. Piroxicam (PRX) was used as a low-dose and poorly-soluble model drug, and hydroxypropyl methylcellulose (HPMC) and polydextrose (PD) were used as carrier polymers for electrospinning (ES). The initial-stage dissolution of the nanofibers was monitored in situ with three-dimensional white light microscopic interferometry (SWLI) and high-resolution optical microscopy. The physical solid-state characterization of nanofibers was performed with Raman spectroscopy, X-ray powder diffraction (XRPD), and scanning electron microscopy (SEM). We showed that PRX recrystallizes in a microcrystalline form immediately after wetting of nanofibers, which could lead to enhanced dissolution of drug. Initiation of crystal formation was detected by SWLI, indicating: (1) that PRX was partially released from the nanofibers, and (2) that the solid-state form of PRX changed from amorphous to crystalline. The amount, shape, and size of the PRX crystals depended on the carrier polymer used in the nanofibers and dissolution media (pH). In conclusion, the present nanofibers loaded with PRX exhibit a quasi-dynamic dissolution via recrystallization. SWLI enables a rapid, non-contacting, and non-destructive method for in situ monitoring the early-stage dissolution of nanofibers and regional mapping of crystalline changes (re-crystallization) during wetting. Such analysis is crucial because the wetting and dissolution of nanofibers can greatly influence the performance of nanofibrous drug delivery systems in pharmaceutical and biomedical applications. [ABSTRACT FROM AUTHOR]

Abstract: Solid-state and powder properties of softwood lignin and cellulose prepared by a new catalytic oxidation and acid precipitation method were characterized and compared with the commercial softwood and hardwood lignin and cellulose products. Catalytic pre-treated softwood lignin (CPSL) and cellulose (CPSC) were isolated from pine wood (Pinus sylvestris). CPSL with nearly micronized-scale particle size showed excellent powder flow and densification behavior due to the round shape and electrically minimum charged surface characteristics of particles. CPSL and the reference lignin studied were amorphous solids while CPSC exhibited a typical crystal lattice for cellulose I. In conclusion, physicochemical material properties of lignin and cellulose can be modified for biomedical and pharmaceutical applications with the present catalytic oxidation and acid precipitation method. [Copyright &y& Elsevier]

The isolation and physical material properties of suberin fatty acids (SFAs) were investigated with special reference to their potential applications as novel pharmaceutical excipients. SFAs were isolated from outer birch bark (OBB) with a new extractive hydrolysis method. The present simplified isolation process resulted in a moderate batch yield and chemical purity of SFAs, but further development is needed for establishing batch-to-batch variation. Cryogenic milling was the method of choice for the particle size reduction of SFAs powder. The cryogenically milled SFAs powder exhibited a semicrystalline structure with apparent microcrystalline domains within an amorphous fatty acids matrix. The thermogravimetric analysis (TGA) of SFAs samples showed a good thermal stability up to 200 °C, followed by a progressive weight loss, reaching a plateau at about 95% volatilization at about 470 °C. The binary blends of SFAs and microcrystalline cellulose (MCC; Avicel PH 101) in a ratio of 25:75 (w/w) displayed good powder flow and tablet compression properties. The corresponding theophylline-containing tablets showed sustained or prolonged-release characteristics. The physicochemical and bulk powder properties of SFAs isolated from OBB are auspicious in terms of potential pharmaceutical excipient applications.

Objective: The aim of this work was to analyze the essential oil content and its composition in the drug (Serpylli herba) of wild thyme (Thymus serpyllum L.) originating from 20 different natural places of growth in Estonia., Material and Methods: The quantitative content of essential oil was determined according to the method of European Pharmacopoeia. Gas chromatographic analysis of essential oils was carried out using a gas chromatography with flame ionization detector on two fused silica capillary columns with bonded stationary phases NB-30 and SW-10. The identification of the oil components was accomplished by comparing their retention indices on two columns with the retention indices values of standard compounds, with our retention indices data bank and with literature data. The results obtained were confirmed by gas chromatography / mass spectrometry., Results: The content of essential oil is between 0.6 and 4 ml/kg and usually is not in conformity with European Pharmacopoeia standard (3 ml/kg). There were 55 components identified in the essential oil of wild thyme of Estonian origin. Differently from the data in the literature of foreign countries, thymol and carvacrol are not the main components of the essential oil of wild thyme growing in Estonia. The main components here are (E)-nerolidol, caryophyllene oxide, myrcene, (E)-beta-caryophyllene and germacrene D., Conclusion: In Estonia, the (E)-nerolidol-caryophyllene oxide, (E)-nerolidol-myrcene and myrcene chemotypes of wild thyme drug are distinguishable.