Search

Toona ciliata var. pubescens, known as "Chinese mahogany", has high commercial value and is classified as a level II priority protected wild plant in China. However, due to overexploitation and its poor natural regeneration capacity, natural T. ciliata var. pubescens forests show varying degrees of decline in habitat adaptability. Arbuscular mycorrhizal fungi (AMF) symbiosis presents a potential strategy to enhance its regeneration. In this study, T. ciliata var. pubescens seedlings were inoculated with Septoglomus viscosum, followed by RNA-Seq analysis to compare gene expression differences between AMF-inoculated (AMI) and non-mycorrhizal (NM) treatments three months post-inoculation. A total of 16,163 differentially expressed genes (DEGs) were upregulated by AMF colonization, constituting 96.46% of the total DEGs. Specifically, 14,420 DEGs were exclusively expressed in the AMI treatment, while 35 DEGs were completely silenced. Most of the upregulated DEGs were located on the cell membrane, nucleus, and cytoskeleton and functioned in protein binding, S-adenosylmethionine-dependent methyltransferase activity, and lipid binding during cellular/macromolecule/protein localization, intracellular/protein transport, the cell cycle, and signal transduction. Additionally, lots of key genes related to oxidative stress responses, nutrient transport, and small GTPase-mediated signal transduction were found to be upregulated. These results suggest that AMF inoculation may enhance root cell growth by activating genes involved in nutrient uptake, stress responses, signal transduction, and substance transportation. This study elucidates the molecular mechanisms underlying the growth promotion of T. ciliata var. pubescens through AMF symbiosis, laying a foundation for the future application of AMF in its natural forest regeneration. [ABSTRACT FROM AUTHOR]

This research was designed to investigate the protective effects of TSPN on steroid-induced avascular necrosis of the femoral head (ANFH) and the likely mechanisms of those effects. As an in vivo study, TSPN was shown to be protective against steroid-induced ANFH due to the upregulation of VEGF-A. Furthermore, TSPN attenuated the apoptosis of osteocytes and reduced the expression of Caspase-3 relative to the model group. As an in vitro study, TSPN exerted a concentration-dependent protective effect against apoptosis in MC3T3-E1 cells. Moreover, TSPN (at a dose of 100 μg/mL) significantly reversed the dexamethasone-induced augmentation of Caspase-3 expression and activity. Therefore, our study demonstrated that TSPN had a protective effect against steroid-induced ANFH that was related to the upregulation of VEGF-A and the inhibition of apoptosis and Caspase-3 activation. [ABSTRACT FROM AUTHOR]

In this study, two different biomaterials were fabricated and their potential use as a bilayer scaffold for skin tissue engineering applications was assessed. The upper layer biomaterial was a Poly(ε-caprolactone-co-lactide)/Poloxamer (PLCL/Poloxamer) nanofiber membrane fabricated using electrospinning technology. The PLCL/Poloxamer nanofibers (PLCL/Poloxamer, 9/1) exhibited strong mechanical properties (stress/strain values of 9.37±0.38 MPa/187.43±10.66%) and good biocompatibility to support adipose-derived stem cells proliferation. The lower layer biomaterial was a hydrogel composed of 10% dextran and 20% gelatin without the addition of a chemical crosslinking agent. The 5/5 dextran/gelatin hydrogel displayed high swelling property, good compressive strength, capacity to present more than 3 weeks and was able to support cells proliferation. A bilayer scaffold was fabricated using these two materials by underlaying the nanofibers and casting hydrogel to mimic the structure and biological function of native skin tissue. The upper layer membrane provided mechanical support in the scaffold and the lower layer hydrogel provided adequate space to allow cells to proliferate and generate extracellular matrix. The biocompatibility of bilayer scaffold was preliminarily investigated to assess the potential cytotoxicity. The results show that cell viability had not been affected when cocultured with bilayer scaffold. As a consequence, the bilayer scaffold composed of PLCL/Poloxamer nanofibers and dextran/gelatin hydrogels is biocompatible and possesses its potentially high application prospect in the field of skin tissue engineering. [ABSTRACT FROM AUTHOR]

Stem cells and scaffolds play a very important role in tissue engineering. Here, we isolated synovium-derived mesenchymal stem cells (SMSCs) from synovial membrane tissue and characterized stem-cell properties. Gelatin nanoparticles (NP) were prepared using a two-step desolvation method and then pre-mixed into different host matrix (silk fibroin (SF), gelatin (Gel), or SF–Gel mixture) to generate various 3D printed nanocomposite scaffolds (NP/SF, NP/SF–Gel, NP/Gel-1, and NP/Gel-2). The microstructure was examined by scanning electron microscopy. Biocompatibility assessment was performed through CCK-8 assay by coculturing with SMSCs at 1, 3, 7 and 14 days. According to the results, SMSCs are similar to other MSCs in their surface epitope expression, which are negative for CD45 and positive for CD44, CD90, and CD105. After incubation in lineage-specific medium, SMSCs could differentiate into chondrocytes, osteocytes and adipocytes. 3D printed nanocomposite scaffolds exhibited a good biocompatibility in the process of coculturing with SMSCs and had no negative effect on cell behavior. The study provides a strategy to obtain SMSCs and fabricate 3D printed nanocomposite scaffolds, the combination of which could be used for practical applications in tissue engineering. [ABSTRACT FROM AUTHOR]

The activation of signal transducer and activator of transcription 3 (Stat3) signaling is the common hallmark in various human cancers including osteosarcoma. In the present study, according to PCR-based microarrays using cDNA prepared from interleukin-6 (IL-6) treated osteosarcoma cells, we found that leucine-rich repeat-containing G protein-coupled receptor 4 (LGR4) was a transcriptional target of Stat3. Overexpression of Stat3 promoted LGR4 expression, while its deficiency using small interfering RNA (siRNA) reduced LGR4 expression. Furthermore, we identified a Stat3 binding motif located at -556 to -549 bp in the LGR4 promoter that is able to interact with Stat3. Thus, our results suggest a previously unknown Stat3-LGR4 molecular network, which may control osteosarcoma development and progression. [ABSTRACT FROM AUTHOR]

Background: Arthroscopic anterior cruciate ligament reconstruction (ACLR) is the best treatment choice for returning to pre-injury activities following ACL rupture. Although allografts are considered an effective alternative to autografts, there is still controversy regarding the safety and effectiveness of this procedure, especially concerning the risk of postoperative infection and disease transmission. The purpose of this study was to compare the efficacy outcomes and safety between allografts and autografts in primary ACLR., Methods: The retrospective analysis involved 112 patients (58 patients received allogeneic tendons and 54 patients received autologous hamstring tendons) who underwent primary ACLR. All patients were followed up and evaluated on admission and at 1 week, 3 months, 6 months, and 1 year postoperatively. The efficacy outcome of the ACLR was evaluated by International Knee Documentation Committee (IKDC) score and physical examinations (Lachman test, anterior drawer test, and pivot shift test). The safety outcome of allografts and autografts was compared by investigating the occurrence of postoperative complications, including postoperative inflammation and potential disease transmission. The benefits of each operation for surgeons and patients were also analyzed, including the length of surgical incision and operative time., Results: There was no significant difference in the demographic and clinical characteristics between the allograft and autograft groups. The two cohorts proved to be similar in terms of the acute or chronic nature of the cruciate ligament and the incidence of concomitant meniscal surgery. Arthroscopic ACLR was performed in all patients. The physical examinations were all positive before surgery and negative immediately after the operation. The KT-1000 and IKDC scores of two groups significantly decreased than pre-operative ones (P<0.05), but the difference between the two groups was not statistically significant (P>0.05). At final follow-up, all patients had returned to their pre-injury activities. Allografts showed no increased risk for postoperative infection or potential disease transmission relative to autografts., Conclusions: The outcomes of reconstructed ACL with allografts were similar to those of autographs. Moreover, the safety of allografts showed to be comparable to that of autografts, especially concerning postoperative infection and disease transmission. Therefore, the surgical option should be chosen wisely according to the patient's condition., Competing Interests: Conflicts of Interest: All authors have completed the ICMJE uniform disclosure form (available at https://atm.amegroups.com/article/view/10.21037/atm-22-1008/coif). The authors have no conflicts of interest to declare., (2022 Annals of Translational Medicine. All rights reserved.)

Background: Electrospinning is an easy and effective technique to produce submicron fibers possessing a range of attractive characteristics such as interconnected porous structures similar to natural ECM and good resilience to movement. Rapid and efficient cell attachment to nanofibrous matrices is a necessary prerequisite in tissue engineering. Thus, the aim of this study is to evaluate poly(ε-caprolactone-co-lactide)/Pluronic (PLCL/Pluronic) nanofibrous matrices with avidin-biotin technology for improving cell adhesion for the first time., Results: PLCL/Pluronic nanofibers had relatively homogeneous fibers and interconnected porous structures. Pluronic significantly modified the hydrophilicity of nanofibrous matrices and PLCL/Pluronic nanofibrous matrices had better performance on maintaining cell proliferation. Avidin-biotin technology had no negative effect on the hydrophilic property, mechanical property and cell proliferation. Meanwhile, the attachment and spreading of adipose-derived stem cells (ADSCs) onto PLCL/Pluronic nanofibrous matrices with avidin-biotin technology was promoted obviously., Conclusions: PLCL/Pluronic nanofibrous matrices inheriting the excellent characteristics of both PLCL and Pluronic have the better cell adhesion ability through avidin-biotin technology, implying a promising application in skin care, tissue regeneration and other related area.

Hydrogels play a very important role in cartilage tissue engineering. Here, we oxidized dextran (Odex) and modified gelatin (Mgel) to fabricate a fast forming hydrogel without the addition of a chemical crosslinking agent. The dynamic gelling process was measured through rheological measurements. The microstructure was examined by lyophilizing to get porous scaffolds. Biological assessment was performed through CCK-8 assays by using synovium-derived mesenchymal cells (SMSCs) at 1, 3, 7 and 14 days. In vivo evaluation for application in cartilage tissue engineering was performed 8 weeks after subcutaneous injection of SMSC-loaded Odex/Mgel hydrogels combined with TGF-β3 in the dorsa of nude mice. According to the results, a fast forming hydrogel was obtained by simply modifying dextran and gelatin. Moreover, the Odex/Mgel hydrogel exhibited good biocompatibility in cultures of SMSCs and a homogeneous distribution of live cells was achieved inside the hydrogels. After 8 weeks, newly formed cartilage was achieved in the dorsa of nude mice; no inflammatory reaction was observed and high production of GAGs was shown. The method provides a strategy for the design and fabrication of fast in situ forming hydrogels. The Odex/Mgel hydrogel could be used for the regeneration of cartilage in tissue engineering.