Search

As QUEST has a small central solenoid (CS), a larger Ohmic discharge current has been obtained when the plasma shifts to the inboard side. This tendency restricts a divertor operation to the smaller plasma current regime. As the inner divertor coil has a smaller mutual inductance, it would be expected that its utilization seems to be better for easier plasma current ramp-up for a divertor operation. In this work, we made comparative studies on the plasma current ramp-up for two divertor coils. It is found that while the inner divertor coil with smaller mutual inductance needs a larger coil current, the outer divertor coil with larger mutual inductance needs a smaller coil current for divertor operation. Thus we have found that the plasma current ramp-up characteristics are almost similar for both configurations. We also propose a new fueling method for spherical tokamak (ST) using the coaxial helicity injection (CHI). The main plasma current would be generated at first, and then the CHI plasma current is created between bottom two electrode plates and merged into the main plasma current for fueling.

A CW phased-array antenna system for electron cyclotron/Bernstein wave heating and current drive (ECWH/CD, EBWH/CD) experiments was developed in the QUEST. The antenna was designed to excite an elliptically polarized pure O-mode wave in oblique injection for the O-X-B mode conversion scenario, and its good performance was confirmed at a high power level. Long pulse discharges with a plasma current of 10 kA and 15 kA were non-inductively attained for 37 s and 20 s, respectively, with only radio frequency (RF) power. Divertor configurationswere also obtained in the RF-sustained plasmas. A new operational window for sustained plasma current was observed in the high-density plasma with a higher RF incident power. Two new heating and current drive systems with an 8.56GHz klystron and a 28GHz gyrotron are being prepared to conduct CW EBWH/CD experiments in the high-density plasma. © 2012 The Japan Society of Plasma Science and Nuclear Fusion Research.

Three-dimensional resistive MHD simulation was carried out in order to develop a method to fuel the plasma core by merging two Spherical Torus (ST) plasmas. A relatively small ST plasma was translated into the axial direction by external magnetic field control and made to collide with the larger ST. In this calculation, ballooning instability occurred in both plasmas during translation, while the magnetic surface was observed to collapse from the Poincare plot of the magnetic lines. It was observed that the magnetic lines in the core regions of the two STs were connected to each other and that the merging was completed.

Experiments aiming at 'day long operation at high performance' have been carried out in TRIAM-1M. The record value of the discharge duration was updated to 5 h and 16 min. Steady-state tokamak operation is studied under the localized plasma wall interaction conditions. The distributions of the heat load, the particle recycling flux and impurity source are investigated to understand the co-deposition and wall pumping. The formation and sustainment of an internal transport barrier (ITB) in enhanced current drive mode has been investigated by controlling the lower hybrid driven current profile by changing the phase spectrum. An ITER relevant remote steering antenna for electron cyclotron wave injection was installed and a relativistic Doppler resonance of the oblique propagating extraordinary wave with energetic electrons driven by lower hybrid waves was studied.

As the finalization of a hydrogen experiment towards the deuterium phase, the exploration of the best performance of hydrogen plasma was intensively performed in the large helical device. High ion and electron temperatures, Ti and Te, of more than 6 keV were simultaneously achieved by superimposing high-power electron cyclotron resonance heating onneutral beam injection (NBI) heated plasma. Although flattening of the ion temperature profile in the core region was observed during the discharges, one could avoid degradation by increasing the electron density. Another key parameter to present plasma performance is an averaged beta value $\left\langle \beta \right\rangle $ . The high $\left\langle \beta \right\rangle $ regime around 4% was extended to an order of magnitude lower than the earlier collisional regime. Impurity behaviour in hydrogen discharges with NBI heating was also classified with a wide range of edge plasma parameters. The existence of a no impurity accumulation regime, where the high performance plasma is maintained with high power heating >10 MW, was identified. Wide parameter scan experiments suggest that the toroidal rotation and the turbulence are the candidates for expelling impurities from the core region.

The consequence of the failure effect of burn control diagnostic systems, such as neutron diagnostics, bolometers, electron cyclotron emission power loss diagnostics, interferometer, and lost alpha...

The first successful high power heating of a high dielectric constant spherical tokamak plasma by an electron Bernstein wave (EBW) is reported. An EBW was excited by mode conversion (MC) of an X mode cyclotron wave injected from the low magnetic field side of the TST-2 spherical tokamak. Evidence of electron heating was observed as increases in the stored energy and soft x-ray emission. The increased emission was concentrated in the plasma core region. A heating efficiency of over 50% was achieved, when the density gradient in the MC region was sufficiently steep.