Search

Diamine reagents have been used to functionalize a [2]rotaxane building block bearing an activated pentafluorophenyl ester stopper. Upon a first acylation, an intermediate host-guest complex with a terminal amine function is obtained. Dissociation of the intermediate occurs in solution and acylation of the released axle generates a [2]rotaxane with an elongated axle subunit. In contrast, the corresponding [3]rotaxane can be obtained if the reaction conditions are appropriate to stabilize the inclusion complex of the mono-amine intermediate and the pillar[5]arene. This is the case when the stopper exchange is performed under mechanochemical solvent-free conditions. Alternatively, if the newly introduced terminal amide group is large enough to prevent the dissociation, the second acylation provides exclusively a [3]rotaxane. On the other hand, detailed conformational analysis has been also carried out by variable temperature NMR investigations. A complete understanding of the shuttling motions of the pillar[5]arene subunit along the axles of the rotaxanes reported therein has been achieved with the help of density functional theory calculations., (© 2024 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

Detailed investigations into the stepwise bis-functionalization of a pillar[5]arene-containing rotaxane building block have been carried out. Upon a first stopper exchange, the pillar[5]arene moiety of the mono-acylated product is preferentially located close to its reactive pentafluorophenyl ester stopper, thus limiting the accessibility to the reactive carbonyl group by the nucleophilic reagents. Selective mono-functionalization is thus very efficient. Introduction of a second stopper is then possible to generate dissymmetrical rotaxanes with different amide stoppers. Moreover, when dethreading is possible upon the second acylation, the pillar[5]arene plays the role of a protecting group allowing the synthesis of dissymmetrical axles that are particularly difficult to prepare under statistical conditions. Finally, detailed conformation analysis of the rotaxanes revealed that the position of the pillar[5]arene moiety on its axle subunit is mainly governed by polar interactions in nonpolar organic solvents, whereas solvophobic effects play a major role in polar solvents., (© 2023 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

Stable pillar[5]arene-containing [2]rotaxane building blocks with pentafluorophenyl ester stoppers have been efficiently prepared on a multi-gram scale. Reaction of these building blocks with various nucleophiles gave access to a wide range of [2]rotaxanes with amide, ester or thioester stoppers in good to excellent yields. The rotaxane structure is fully preserved during these chemical transformations. Actually, the addition-elimination mechanism at work during these transformations totally prevents the unthreading of the axle moiety of the mechanically interlocked system. The stopper exchange reactions were optimized both in solution and under mechanochemical solvent-free conditions. While amide formation is more efficient in solution, the solvent-free conditions are more powerful for the transesterification reactions. Starting from a fullerene-functionalized pillar[5]arene derivative, this new strategy gave easy access to a photoactive [2]rotaxane incorporating a C 60 moiety and two Bodipy stoppers. Despite the absence of covalent connectivity between the Bodipy and the fullerene moieties in this photoactive molecular device, efficient through-space excited state interactions have been evidenced in this rotaxane., (© 2021 Wiley-VCH GmbH.)

Invited for the cover of this issue are the groups of S. Seki (Kyoto), G. Reginato (Sesto Fiorentino), J.-F. Nierengarten (Strasbourg), A. Abate (Berlin) and J. L. Delgado (San Sebastian). The image depicts an artistic view of a dendrimer-like hole transporting material at work in a perovskite solar cell. Read the full text of the article at 10.1002/chem.202101110., (© 2021 Wiley-VCH GmbH.)

With their ten peripheral substituents, pillar[5]arenes are attractive compact scaffolds for the construction of nanomaterials with a controlled number of functional groups distributed around the macrocyclic core. This review paper is focused on the functionalization of pillar[5]arene derivatives with small dendrons to generate dendrimer-like nanomaterials and bioactive compounds. Examples include non-viral gene vectors, bioactive glycoclusters, and liquid-crystalline materials.

Invited for this month's cover are Iwona and Jean-François Nierengarten from the University of Strasbourg. The cover picture shows the structure of a [2]rotaxane building block bearing 3,5-bis(trifluoromethyl) benzenesulfonate (BTBS) stoppers. The BTBS moieties of this compound are good leaving groups allowing to perform stopper exchange by treatment with different nucleophiles to afford the corresponding rotaxanes with ester, ether or thioether stoppers. Read the full text of their Full Paper at https://doi.org/10.1002/open.202000035., (© 2020 Wiley‐VCH Verlag GmbH & Co. KGaA, Weinheim.)

The electronic and structural properties of ten heteroleptic [Cu(NN)(PP)] + complexes have been investigated. NN indicates 1,10-phenanthroline (phen) or 4,7-diphenyl-1,10-phenanthroline (Bphen); each of these ligands is combined with five PP bis-phosphine chelators, i.e., bis(diphenylphosphino)methane (dppm), 1,2-bis(diphenylphosphino)ethane (dppe), 1,3-bis(diphenylphosphino)propane (dppp), 1,2-bis(diphenylphosphino)benzene (dppb), and bis[(2-diphenylphosphino)phenyl] ether (POP). All complexes are mononuclear, apart from those based on dppm, which are dinuclear. Experimental data-also taken from the literature and including electrochemical properties, X-ray crystal structures, UV-vis absorption spectra in CH 2 Cl 2 , luminescence spectra and lifetimes in solution, in PMMA, and as powders-have been rationalized with the support of density functional theory calculations. Temperature dependent studies (78-358 K) have been performed for selected complexes to assess thermally activated delayed fluorescence. The main findings are (i) dependence of the ground-state geometry on the crystallization conditions, with the same complex often yielding different crystal structures; (ii) simple model compounds with imposed C 2 v symmetry ([Cu(phen)(PX 3 ) 2 ] + ; X = H or CH 3 ) are capable of modeling structural parameters as a function of the P-Cu-P bite angle, which plays a key role in dictating the overall structure of [Cu(NN)(PP)] + complexes; (iii) as the P-Cu-P angle increases, the energy of the metal-to-ligand charge transfer absorption bands linearly increases; (iv) the former correlation does not hold for emission spectra, which are red-shifted for the weaker luminophores; (v) the larger the number of intramolecular π-interactions within the complex in the ground state, the higher the luminescence quantum yield, underpinning a geometry locking effect that limits the structural flattening of the excited state. This work provides a general framework to rationalize the structure-property relationships of [Cu(NN)(PP)] + , a class of compounds of increasing relevance for electroluminescent devices, photoredox catalysis, and solar-to-fuels conversion, which so far have been investigated in an unsystematic fashion, eluding a comprehensive understanding.

A rotaxane scaffold incorporating two dithiolane anchoring units for the modification of gold surfaces has been functionalized with multiple copies of a redox unit, namely ferrocene. Surface modification has been first assessed at the single molecule level by atomic force microscopy (AFM) and scanning tunneling microscopy (STM) imaging, while tip enhanced Raman spectroscopy (TERS) provided the local vibrational signature of the ferrocenyl subunits of the rotaxanes grafted onto the gold surface. Finally, oxidation of the redox moieties within a rotaxane scaffold grafted onto gold microelectrodes has been investigated by ultrafast cyclic voltammetry. Intramolecular electron hopping is indeed extremely fast in this system. Moreover, the kinetics of charge injection depends on the molecular coverage due to the influence of intermolecular contacts on molecular motions., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A sophisticated photoactive molecular device has been prepared by combining recent concepts for the preparation of multifunctional nanomolecules (click chemistry on multifunctional scaffolds) with supramolecular chemistry (self-assembly to prepare rotaxanes). Specifically, a clickable [2]rotaxane scaffold incorporating a free-base porphyrin stopper has been prepared and functionalized with ten peripheral Zn(II)-porphyrin moieties. Electrochemical investigations of the final compound revealed a peculiar behavior resulting from the intramolecular coordination of the Zn(II) porphyrin moieties to 1,2,3-triazole units. Finally, steady state investigations of the compound combining Zn(II) and free-base porphyrin moieties have shown that this compound is a light-harvesting device capable of channeling the light energy from the peripheral Zn(II)-porphyrin subunits to the core by singlet-singlet energy transfer., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A pillar[5]arene-containing rotaxane building block bearing exchangeable stoppers has been prepared in multigram scale quantities with high yields from the reaction of 2,4-dinitrophenol (DNP) with the inclusion complex resulting from the association of dodecanedioyl chloride with 1,4-diethoxypillar[5]arene. Stopper exchange reactions have been achieved by treatment of the resulting DNP diester with various amines through an addition-elimination mechanism preventing the unthreading of the axle component during the reaction and thus preserving the [2]rotaxane structures. The resulting diamide [2]rotaxane derivatives have thus been obtained in good to excellent yields. Importantly, [2]rotaxanes difficult or impossible to prepare by direct introduction of the two stoppers in a single synthetic step are now easily available., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Pillar[5]arene derivatives bearing peripheral porphyrin subunits have been efficiently prepared from a deca-azide pillar[5]arene building block (17) and Zn II -porphyrin derivatives bearing a terminal alkyne function (9 and 16). For the resulting deca-Zn II -porphyrin arrays (18 and 20), variable temperature NMR studies revealed an intramolecular complexation of the peripheral Zn II -porphyrin moieties by 1,2,3-triazole subunits. As a result, the molecules adopt a folded conformation. This was further confirmed by UV/Vis spectroscopy and cyclic voltammetry. In addition, we have also demonstrated that the coordination-driven unfolding of 18 and 20 can be controlled by an external chemical stimulus. Specifically, addition of an imidazole derivative (22) to solution of 18 or 20 breaks the intramolecular coordination at the origin of the folding. The resulting molecular motions triggered by the addition of the imidazole ligand mimic the blooming of a flower., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Two new conjugated porphyrin-based systems (dimers 3 and 4) endowed with suitable crown ethers have been synthesized as receptors for a fullerene-ammonium salt derivative (1). Association constants in solution have been determined by UV-vis titration experiments in CH 2 Cl 2 at room temperature. The designed hosts are able to associate up to two fullerene-based guest molecules and present association constants as high as ∼5 × 10 8 M -1 . Calculation of the allosteric cooperative factor α for supramolecular complexes [3·1 2 ] and [4·1 2 ] showed a negative cooperative effect in both cases. The interactions accounting for the formation of the associates are based, first, on the complementary ammonium-crown ether interaction and, second, on the π-π interactions between the porphyrin rings and the C 60 moieties. Theoretical calculations have evidenced a significant decrease of the electron density in the porphyrin dimers 3 and 4 upon complexation of the first C 60 molecule, in good agreement with the negative cooperativity found in these systems. This negative effect is partially compensated by the stabilizing C 60 -C 60 interactions that take place in the more stable syn-disposition of [4·1 2 ].

New liquid-crystalline pillar[5]arene derivatives have been prepared by grafting first-generation Percec-type poly(benzylether) dendrons onto the macrocyclic scaffold. The molecules adopt a disc-shaped structure perfectly suited for self-organization into a columnar liquid-crystalline phase. In this way, the pillar[5]arene cores are piled up, thus forming a nanotubular wire encased within a shell of peripheral dendrons. The capability of pillar[5]arenes to form inclusion complexes has been also exploited. Specifically, detailed binding studies have been carried out in solution with 1,6-dicyanohexane as the guest. Inclusion complexes have also been prepared in the solid state. Supramolecular organization into the Colh mesophase has been deduced from X-ray diffraction data and found to be similar to that observed within the crystal lattice of a model inclusion complex prepared from 1,4-dimethoxypillar[5]arene and 1,6-dicyanohexane., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The synthesis of pillar[5]arene-based glycoclusters has been readily achieved by CuAAC conjugations of azido- and alkyne-functionalized precursors. The lectin binding properties of the resulting glycosylated multivalent ligands have been studied by at least two complementary techniques to provide a good understanding. Three lectins were selected from bacterial pathogens based on their potential therapeutic applications as anti-adhesives, namely LecA and LecB from Pseudomonas aeruginosa and BambL from Burkholderia ambifaria. As a general trend, multivalency improved the binding to lectins and a higher affinity can be obtained by increasing to a certain limit the length of the spacer arm between the carbohydrate subunits and the central macrocyclic core., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A synthetic approach combining recent concepts for the preparation of multifunctional nanomolecules (click chemistry on multifunctional scaffolds) with supramolecular chemistry (self-assembly to prepare rotaxanes) gave easy access to a large variety of sophisticated [2]rotaxane heteroglycoclusters. Specifically, compounds combining galactose and fucose have been prepared to target the two bacterial lectins (LecA and LecB) from the opportunistic pathogen Pseudomonas aeruginosa., (© 2015 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA. This is an open access article under the terms of Creative Commons Attribution NonCommercial-NoDerivs License, which permits use and distribution in any medium, provided the original work is properly cited, the use is non-commercial and no modifications or adaptations are made.)

Pillar[n]arenes are a new class of macrocycles that are efficiently prepared from readily available building blocks. In this particular field, our research teams became interested in the use of a pillar[5]arene core as a compact scaffold for the synthesis of nanomaterials with a controlled distribution of functional groups on both rims of the macrocyclic framework. Such compounds have found applications in biology as multivalent ligands for specific lectines or as polycationic compounds for gene delivery. Liquid-crystalline derivatives have been prepared by grafting mesogenic subunits on the pillar[5]arene core. On the other hand, we also became interested in the preparation of pillar[5]arene-containing [2]rotaxanes. In particular, we have shown that pillar[5] arene-based [2]rotaxanes can be obtained from the reaction of amine stoppers with pseudo-rotaxanes resulting from the association of a pillar[5]arene derivative with a diacyl chloride reagent. Finally, amphiphilic [2]rotaxanes have been prepared and incorporated in thin ordered films at the air-water interface.

The use of multivalent carbohydrate compounds to block cell-surface lectin receptors is a promising strategy to inhibit the entry of pathogens into cells and could lead to the discovery of novel antiviral agents. One of the main problems with this approach, however, is that it is difficult to make compounds of an adequate size and multivalency to mimic natural systems such as viruses. Hexakis adducts of [60]fullerene are useful building blocks in this regard because they maintain a globular shape at the same time as allowing control over the size and multivalency. Here we report water-soluble tridecafullerenes decorated with 120 peripheral carbohydrate subunits, so-called 'superballs', that can be synthesized efficiently from hexakis adducts of [60]fullerene in one step by using copper-catalysed azide–alkyne cycloaddition click chemistry. Infection assays show that these superballs are potent inhibitors of cell infection by an artificial Ebola virus with half-maximum inhibitory concentrations in the subnanomolar range.

Amphiphilic pillar[5]arene-containing [2]rotaxanes have been prepared and fully characterized. In the particular case of the [2]rotaxane incorporating a 1,4-diethoxypillar[5]arene subunit, the structure of the compound was confirmed by X-ray crystal structure analysis. Owing to a good hydrophilic/hydrophobic balance, stable Langmuir films have been obtained for these rotaxanes and the size of the peripheral alkyl chains on the pillar[5]arene subunit has a dramatic influence on the reversibility during compression-decompression cycles. Indeed, when these are small enough, molecular reorganization of the rotaxane by gliding motions are capable of preventing strong π-π interactions between neighboring macrocycles in the thin film., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Click reactions largely cross the borders of organic synthetic chemistry and are now at the forefront of many interdisciplinary studies at the interfaces between chemistry, physics, and biology. As part of this research, our group is involved in a program on the development of clickable fullerene building blocks and their application in the preparation of a large variety of new advanced materials and bioactive compounds. Importantly, the introduction of the click chemistry concept in fullerene chemistry allowed us to produce compounds that would barely be accessible by using the classical tools of fullerene chemistry. This is particularly the case for the conjugation of fullerenes with other carbon nanoforms, such as carbon nanohorns and graphene. It is also the case for most of the sophisticated molecular ensembles constructed from clickable fullerene hexa-adduct building blocks. In this paper, we have summarized our ongoing progress in this particular field., (Copyright © 2014 The Chemical Society of Japan and Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A fullerene ammonium derivative has been combined with different metalloporphyrin-crown ether receptors to generate very stable supramolecules. The combination of fullerene-porphyrin and ammonium-crown ether interactions leads to a strong chelate effect as evidenced by a high effective molarity (3.16 M). The different parameters influencing the stability of the supramolecular ensembles, in particular the nature of the metal in the porphyrin moiety, have been rationalized with the help of theoretical calculations thus providing new insights into fullerene-porphyrin interactions., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Among the large variety of bioactive C60 derivatives, fullerene derivatives substituted with sugar residues, that is, glycofullerenes, are of particular interest. The sugar residues are not only solubilizing groups; their intrinsic biological properties also provide additional appealing features to the conjugates. The most recent advances in the synthesis and the biological applications of glycofullerenes are summarized in the present review article with special emphasis on globular glycofullerenes, that is, fullerene sugar balls, constructed on a hexa-substituted fullerene scaffold. The high local concentration of carbohydrates around the C60 core in fullerene sugar balls is perfectly suited to the binding of lectins through the "glycoside cluster effect", and these compounds are potential anti-adhesive agents against bacterial infection. Moreover, mannosylated fullerene sugar balls have shown antiviral activity in an Ebola pseudotyped infection model. Finally, when substituted with peripheral iminosugars, dramatic multivalent effects have been observed for glycosidase inhibition. These unexpected observations have been rationalized by the interplay of interactions involving the catalytic site of the enzyme and non-glycone binding sites with lectin-like abilities., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The photophysical properties of a supramolecular fullerene-porphyrin ensemble resulting from the self-assembly of a pyrrolidinofullerene-imidazole derivative (F1) with a multimetalloporphyrin array constructed around a hexasubstituted fullerene core (F(ZnP)12) have been investigated. The fullerene hexa-adduct core of the host system does not play any active role in the cascade of photoinduced events of the supramolecular ensemble, indeed no intercomponent photoinduced processes could be observed in host F(ZnP)12. In contrast, upon axial coordination with the monosubstituted fullerene guest F1, a quantitative quenching of the fluorescence signal of the metalloporphyrins was observed for the supramolecular complex [F(ZnP)12(F1)n] both in polar and nonpolar solvents. In toluene, the supramolecular ensemble exhibits a charge transfer emission centered around nm, suggesting the occurrence of intramolecular face-to-face interactions of F1 with neighboring metalloporphyrin moieties within the self-assembled photoactive array. This mechanism is supported by the fact that a one order of magnitude increase in the binding constant was observed for the supramolecular complex [F(ZnP)12(F1)n] when compared with a reference system lacking the pyrrolidinofullerene unit. In benzonitrile, a long-lived charge-separated state (τ=0.3 μs) has been detected for the supramolecular adduct., (Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Dendritic pillar[5]arene derivatives have been efficiently prepared by grafting dendrons with peripheral Boc-protected amine subunits onto a preconstructed pillar[5]arene scaffold. Upon cleavage of the Boc-protected groups, water-soluble pillar[5]arene derivatives with 20 (13) and 40 (14) peripheral ammonium groups have been obtained. The capability of these compounds to form stable nanoparticles with plasmid DNA has been demonstrated by gel electrophoresis, transmission electron microscopy (TEM), and dynamic light scattering (DLS) investigations. Transfection efficiencies of the self-assembled 13/pCMV-Luc and 14/pCMV-Luc polyplexes have been evaluated in vitro with HeLa cells. The transfection efficiencies found for both compounds are good, and pillar[5]arenes 13 and 14 show very low toxicity if any., (Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Preparation of [Cu(NN)(PP)](+) derivatives has been systematically investigated starting from two libraries of phenanthroline (NN) derivatives and bis-phosphine (PP) ligands, namely, (A) 1,10-phenanthroline (phen), neocuproine (2,9-dimethyl-1,10-phenanthroline, dmp), bathophenanthroline (4,7-diphenyl-1,10-phenanthroline, Bphen), 2,9-diphenethyl-1,10-phenanthroline (dpep), and 2,9-diphenyl-1,10-phenanthroline (dpp); (B) bis(diphenylphosphino)methane (dppm), 1,2-bis(diphenylphosphino)ethane (dppe), 1,3-bis(diphenylphosphino)propane (dppp), 1,2-bis(diphenylphosphino)benzene (dppb), 1,1'-bis(diphenylphosphino)ferrocene (dppFc), and bis[(2-diphenylphosphino)phenyl] ether (POP). Whatever the bis-phosphine ligand, stable heteroleptic [Cu(NN)(PP)](+) complexes are obtained from the 2,9-unsubstituted-1,10-phenanthroline ligands (phen and Bphen). By contrast, heteroleptic complexes obtained from dmp and dpep are stable in the solid state, but a dynamic ligand exchange reaction is systematically observed in solution, and the homoleptic/heteroleptic ratio is highly dependent on the bis-phosphine ligand. Detailed analysis revealed that the dynamic equilibrium resulting from ligand exchange reactions is mainly influenced by the relative thermodynamic stability of the different possible complexes. Finally, in the case of dpp, only homoleptic complexes were obtained whatever the bis-phosphine ligand. Obviously, steric effects resulting from the presence of the bulky phenyl rings on the dpp ligand destabilize the heteroleptic [Cu(NN)(PP)](+) complexes. In addition to the remarkable thermodynamic stability of [Cu(dpp)2]BF4, this negative steric effect drives the dynamic complexation scenario toward almost exclusive formation of homoleptic [Cu(NN)2](+) and [Cu(PP)2](+) complexes. This work provides the definitive rationalization of the stability of [Cu(NN)(PP)](+) complexes, marking the way for future developments in this field.

Treatment of 2-diphenylphosphino-6-methylpyridine (dpPyMe) with Cu(CH(3)CN)(4)BF(4) afforded the stable dinuclear Cu(I) complex [Cu(2)(μ-dpPyMe)(3)(CH(3)CN)](BF(4))(2). This compound is a weak emitter in solution, however a remarkably high emission quantum yield (46%) has been found in a rigid matrix at room temperature.

Comparison of the liquid-crystalline properties of a pillar[5]arene core functionalized with 10 mesogenic cyanobiphenyl units with those of a corresponding model compound revealed the strong influence of the macrocyclic pillar[5]arene core on the mesomorphic properties.