Search

A palatal fistula is a pathological condition that connects the nasal cavities with the oral cavity. An oral–nasal fistula is reported as a possible post-surgical complication after the removal of oral carcinomas. The presence of a palatal fistula affects the patient’s quality of life, making it necessary to apply a prosthetic device, such as a palatal plate, to keep the nasal cavities separated from the oral one. There are several surgical techniques to close a palatal fistula, but it is not possible to define the optimal technique as the approach is extremely dependent on the characteristics of the fistula. The aim of this article is to propose a minimally invasive technique to reduce the size of palatal fistulae and to reduce the surgical difficulty (NSPF). A total of 20 patients fulfilled the inclusion criteria and were checked every two weeks. The fistula was injured with a needle every 2 weeks. Fifteen patients who healed with complete closure of the fistula reported no need for a palatal protection plate to eat, drink and speak normally. It is possible to conclude that the NSPF protocol is a valid approach for the non-surgical reduction of palatal fistulae, and it is possible, when the appropriate conditions are present, to achieve complete closure.

Background: Artificial intelligence (AI) has taken hold in public health because more and more people are looking to make a diagnosis using technology that allows them to work faster and more accurately, reducing costs and the number of medical errors. Methods: In the present study, 120 panoramic X-rays (OPGs) were randomly selected from the Department of Oral and Maxillofacial Sciences of Sapienza University of Rome, Italy. The OPGs were acquired and analyzed using Apox, which takes a panoramic X-rayand automatically returns the dental formula, the presence of dental implants, prosthetic crowns, fillings and root remnants. A descriptive analysis was performed presenting the categorical variables as absolute and relative frequencies. Results: In total, the number of true positive (TP) values was 2.195 (19.06%); true negative (TN), 8.908 (77.34%); false positive (FP), 132 (1.15%); and false negative (FN), 283 (2.46%). The overall sensitivity was 0.89, while the overall specificity was 0.98. Conclusions: The present study shows the latest achievements in dentistry, analyzing the application and credibility of a new diagnostic method to improve the work of dentists and the patients’ care.

Musculoskeletal disorders (MSDs) are occupational illnesses concerned with different classes of professionals; dental hygienists are among those. The aim of this trial is to evaluate MSDs prevalence and significance of the symptoms in a sample of dental hygienists.A 20-question questionnaire was administered to a sample of dental hygienists, via social networks. The variables taken into consideration were personal data, hours of sport, working habits, years of professional activity, working hours and number of patients per week, presence or absence of pain.Data were evaluated using standard statistical analysis software, and an Excel database was created. Descriptive statistics were calculated for each variable. Group comparison was assessed by the chi-square test of homogeneity and Fisher's exact test. (p-value0.05 as significant).468 questionnaires were examined: 396 females (85%) and 72 males (15%). The prevailing age was between 25 and 35. Among them, 91% referred to be suffering or have suffered MSDs. The most relevant affected muscular areas are neck (30.6%), shoulder (25.0%) and lumbosacral region (23.3%); the remaining 21.1% is divided among the other regions. Association and statistical analysis among the different variables showed how presence of MSDs negatively influences absenteeism and work performance; further research regarding ergonomics, type of seat, stretching and workout prevention would be important to strengthen the results collected.Musculoskeletal disorders diffusion among dental hygienists is particularly high due to lack of information; the majority of interviewees showed very little awareness of it; this led to a lack of effort in facing or possibly preventing these pathologies.

Maxillofacial ballistic trauma represents a devastating functional and aesthetic trauma. The extensive damage to soft and hard tissue is unpredictable, and because of the diversity and the complexity of these traumas, a systematic algorithm is essential. This study attempts to define the best management of maxillofacial ballistic injuries and to describe a standardized, surgical and prosthetic rehabilitation protocol from the first emergency stage up until the complete aesthetic and functional rehabilitation. In low-velocity ballistic injuries (bullet speed 600 m/s) are associated with an extensive hard and soft tissue disruption, and the management should be based on a three-stage reconstructive algorithm: debridement and fixation, reconstruction, and final revision. Rehabilitating a patient with ballistic trauma is a multi-step challenging treatment procedure that requires a long time and a multidisciplinary team to ensure successful results. The prosthodontic treatment outcome is one of the most important parameters by which a patient measures the restoration of aesthetic, functional, and psychological deficits. This study is a retrospective review: twenty-two patients diagnosed with outcomes of ballistic traumas were identified from the department database, and eleven patients met the inclusion criteria and were enrolled.

to retrospectively evaluate clinical and radiographic outcomes of immediate, flapless full-arch prostheses, supported by 4/6 implants according to prosthetic-driven planning and guided surgery.The study involved 28 edentulous patients (20 female/8 males; average age 67.75 ± 8.627 years), 32 prostheses (17 all-on-4/15 all-on-6) and 164 implants. The Implants survival, prostheses success/survival, peri-implant marginal bone loss, incidence of biological and prosthetic complications were evaluated. Multiple linear regression analysis was performed to analyze the influence of implant and patient characteristics on marginal bone loss.Cumulative implant survival rate was 89.7% for all-on-four (seven failures) and 99.0% for all-on-six (one failure) after a mean follow-up of 6.46 ± 2.236 years (range 1-10 years). Cumulative prosthesis success rate was 51.5% (58.8% for all-on-four/ 43.8% for all-on-six). Prosthesis survival rate was 88.2% for all-on-four. No failure was registered in all-on-six. Mean value of marginal bone loss was 1.38 ± 0.1.28 mm at 5-year and 2.09 ± 0.56 mm at 10-year follow-up. No difference was found in the mean value of marginal bone resorption between all-on-four (1.56 ± 1.61 mm) and all-on-six (1.20 ± 0.85 mm) (p = 0.104) and between tilted (1.22 ± 1.29 mm) and axial implants (1.44 ± 1.27 mm) (p = 0.385) after 5-year follow-up. The incidence of biological complications was 1.0% in all-on-six (one mucositis) and 10.3% in all-on-four (two peri-implantitis). Prosthetic complications affected teeth of final rehabilitations with 3 detachments, 10 chippings or fractures, and 3 severe occlusal wears.Based on the results and within the limitations of the present study, the implant-supported hybrid prosthesis according to prosthetic-driven planning and guided surgery showed to be an efficient, safe, and effective approach to rehabilitate edentulous jaws.

The aim of this cross-sectional study was to investigate the association between carotid intima-media thickness (c-IMT) values and periodontal and peri-implant diseases in a sample of patients with hypertension.A total of 151 participants with presence of at least one dental implant in function for 5 years were recruited. Anthropometric measurements, 24-h ambulatory blood pressure monitoring, ultrasound assessment of carotid arteries (c-IMT and presence of plaque) were recorded and venous blood samples obtained. An oral examination was performed by calibrated examiners to ascertain prevalence and severity of periodontal and peri-implant diseases. Binomial logistic regression was performed to investigate the potential association between various measures of exposure of dental diseases and predictors of cardiovascular risk (c-IMT 0.9 mm and presence of plaque or their combination).Diagnosis of periodontitis (OR 6.71, 95% CI: 2.68-16.76, P 0.001), cumulative mucosal/gingival inflammation (Periodontal Screening and Recording score) (OR 1.25, 95% CI:1.12-1.41, P 0.001), and mucositis (OR 3.34, 95% CI:1.13-9.85, P 0.05) were associated with c-IMT 0.9 mm and/or plaque presence independent of age, sex, smoking, 24 h systolic blood pressure and body mass index differences. No statistically significant results were noted for peri-implantitis. Linear regression models confirmed a positive association of cumulative mucosal/gingival inflammation (β = 0.011, SE 0.002, P 0.001), diagnosis of periodontitis (β = 0.114, SE 0.020, P 0.001), and peri-implant diseases (β = 0.011, SE 0.002, P 0.001) with increased c-IMT values.This study confirms a positive association between mucosal/gingival inflammation and subclinical atherosclerosis assessed by c-IMT values and the presence of carotid plaque in patients with hypertension, independent of traditional cardiovascular risk factors. Future studies are needed to further characterize this relationship.

Background: Removable partial dentures are a frequently used prosthetic treatment in the elderly population, but different types or RPDs might guarantee different chewing capabilities. In many studies, the relationship between chewing and aging has been reported and it has been shown that efficient chewing can improve the overall quality of life. Objectives: In the present study, the relationship between maximum bite force (MBF) and RPDs was studied. A relationship between the body mass index (BMI) and the type of prosthesis was also analyzed. Methods: 240 elderly patients, 120 males and 120 females, with bilateral posterior edentulism (class 1 of Kennedy classification) who had been wearing an RPD for at least a year, were recruited. Patients were divided into two groups: Group 1: male (n = 60) and female (n = 60) patients with bilateral edentulous areas located posterior to the remaining natural teeth and natural teeth in the opposite dental arch. Group 2: male (n = 60) and female (n = 60) patients with maxillary and mandibular bilateral edentulous areas located posterior to the remaining natural teeth. Their Body Mass Index (BMI) and Maximum bite force (MBF) were measured and compared according to the material and design of their RPD. Results: In both Groups, patients wearing cobalt-chrome alloy RPDs (Co-Cr-RPD) (Group 1: 20.25 ± 6.7 MBF, p &lt, 0.001, Group 2: 16.0 ± 5.7 MBF, p &lt, 0.001) had an increased MBF when compared to polymethylmethacrylate RPD (PMMA-RPD) (Group 1: 12.9 ± 3.36 MBF, Group 2: 10.4 + 2.8 MBF), and Valplast RPD (V-RPD) (Group 1: 14.3 ± 4.7 MBF, Group 2: 11.3 ± 3.4 MBF) users. There were no significant differences in bite force between patients wearing PMMA-RPD and V- RPD in both Groups. Patients in Group 2 showed a lower MBF than those in Group 1 (Group 1: 16.05 ± 6.13 MBF, Group 2: 12.6 ± 4.84 MBF, p &lt, 0.001). Conclusions: A reduction in chewing force can lead to choosing softer foods for nutrition, which can lead to an increase in BMI. Our results show that only CoCr-RPD wearers were able to chew consistent food, whereas PMMA- RPD and V-RPD, due to the properties of the materials, their instability, and the possibility of causing pain during mastication, determined a limitation in the choice of food for many of the participants.

The aim of this human cadaver study was to assess the accuracy of zygomatic/pterygoid implant placement using custom-made bone-supported laser sintered titanium templates. For this purpose, pre-surgical planning was done on computed tomography scans of each cadaver. Surgical guides were printed using direct metal laser sintering technology. Four zygomatic and two pterygoid implants were inserted in each case using the guided protocol and related tools. Post-operative computed tomography (CT) scans were obtained to evaluate deviations between the planned and inserted implants. Accuracy was measured by overlaying the real position in the post-operative CT on the virtual presurgical placement of the implant in a CT image. Descriptive and bivariate analyses of the data were performed. As a result, a total of 40 zygomatic and 20 pterygoid implants were inserted in 10 cadavers. The mean deviations between the planned and the placed zygomatic and pterygoid implants were respectively (mean ± SD): 1.69° ± 1.12° and 4.15° ± 3.53° for angular deviation. Linear distance deviations: 0.93 mm ± 1.23 mm and 1.35 mm ± 1.45 mm at platform depth, 1.35 mm ± 0.78 mm and 1.81 mm ± 1.47 mm at apical plane, 1.07 mm ± 1.47 mm and 1.22 mm ± 1.44 mm for apical depth. In conclusion, the surgical guide system showed accuracy for all the variables studied and allowed acceptable and accurate implant placement regardless of the case complexity.

Medication-related osteonecrosis of the jaw (MRONJ) is an adverse event associated with antiresorptive and antiangiogenic drugs. The use of these drugs in the treatment of cancer patients with bone metastasis is necessary and standardized in the literature. A multidisciplinary approach for the patient’s management is strongly recommended. Therefore, it should be necessary to integrate the path of these subjects with a dedicated dental screening in order to first assess the individual risk of developing a MRONJ, and then to plan dental treatments and oral hygiene sessions, and finally to schedule a follow-up to intercept and treat early osteonecrosis. The aim of this manuscript is to propose a new simple medical report to evaluate patients affected by metastatic bone cancer in order to reduce the risk of developing MRONJ.

Subcutaneous facial emphysema related to dental treatments is a well-known clinical complication due to incidental or iatrogenic air or gas penetration into the subcutaneous tissues and fascial planes, leading to distension of the overlying skin. To the best of our knowledge, from 1960 to the current date, only six cases have been reported arising from peri-implant cleaning or non-surgical peri-implantitis treatment. Therefore, the present case of subcutaneous facial emphysema following open-flap air-powder abrasive debridement was the first report during surgical peri-implantitis therapy. Swelling on the left cheek and periorbital space suddenly arose in a 65-year-old woman during open-flap debridement with sodium bicarbonate air-powder abrasion (PROPHYflex™ 3 with periotip, KaVo, Biberach, Germany) of the infected implant surface. The etiology, clinical manifestations, diagnosis, potential complications, and management of subcutaneous emphysema are also briefly reviewed. The present case report draws the attention of dental practitioners, periodontists, oral surgeons, and dental hygienists to the potential iatrogenic risk of subcutaneous emphysema in using air-powder devices in implant surface debridement.

Objectives: The use of digital devices is strongly influencing the dental rehabilitation workflow both for single-crown rehabilitation and for full-arch prosthetic treatments. Methods: In this study, trueness was analyzed by overlapping the scan dataset made with Medit I-500 (by using two different tips and two different scan strategies) with the scan dataset made with lab scanning, and the values of the (90°–10°)/2 method were reported. Precision was evaluated by using the same values of trueness coming from the intra-group overlapping (scan dataset made with an IOS overlapped and compared to each other). Moreover, two different software programs of overlapping were used to calculate accuracy values. Results: The mean difference of trueness was 26.61 ± 5.07 µm with the suggested strategy of intraoral scanning and using a new design of the tip, 37.99 ± 4.94 µm with the suggested strategy of intraoral scanning and using the old design of the tip, and 51.22 ± 6.57 µm with a new strategy of intraoral scanning and using the old design of the tip. The mean difference of precision was 23.57 ± 5.77 µm with the suggested strategy of intraoral scanning and using a new design of the tip, 38.34 ± 11.39 µm with the suggested strategy of intraoral scanning and using the old design of the tip, and 46.93 ± 7.15 µm with a new strategy of intraoral scanning and using the old design of the tip. No difference was found in the trueness and precision data extracted using the two different programs of superimposition Geomagic Control X and Medit Compare. Conclusions: The outcomes of this study showed that the latest version of I-Medit 500 with the use of a new tip seems to be promising in terms of accuracy when a full arch needs to be scanned. Moreover, Medit Compare, which is an application of Medit IOS software, can be used to calculate IOS accuracy.

Severely atrophic alveolar ridges represent a great challenge for implant-prosthetic rehabilitations. The aim of this study was to clinically and histologically evaluate horizontal and vertical bone gain, as well as implant survival/success rate after guided bone regeneration (GBR) for the reconstruction of large bone defects. Fourteen subjects (7 males and 7 females; mean age: 48.9 ± 14.1) were enrolled in the study. They were selected according to specific inclusion criteria and all patients required GBR procedures for placing implants in severe atrophic jaws (bone height ≤6 mm). Guided bone regeneration was performed using dense polytetrafluoroethylene nonresorbable titanium-reinforced membranes associated with particulate heterologous bone grafts. Implant placement was performed 6 months after surgery at the same time as the removal of the membrane. Furthermore, a biopsy sample from the grafted sites was collected to conduct a histological analysis of the regenerated bone. Forty-seven dental implants were placed and followed up after prosthetic loading. Seventeen sites, 8 in the maxilla and 9 in the mandible, were suitable for the GBR procedure. The healing period was uneventful in 13 sites. The average value of vertical bone regeneration was 5.88 ± 1.17 mm. Postloading follow-up ranged from 24 to 59 months. During the follow-up, clinical and radiographic exams showed no significant bone resorption and, in each case, the criteria for implants' survival were respected with no signs of any complications. Histological analysis of the bone biopsy samples revealed residual graft particulate in close contact with newly formed bone. Guided bone regeneration is a reliable technique for reconstruction of severe atrophic ridges. Larger long-term follow-up studies are needed to evaluate the condition of the bone grafted over time and its ability to support functional loading of the implants.

Background: Retrograde peri-implantitis (RPI) is a pathological entity with an unclear etiology (e.g., overheating during implant insertion, residual infection of the tooth replaced by the implant or the endodontic lesion of neighboring teeth) and an extremely low prevalence and has been scarcely investigated. Therefore, the aim of this cross-sectional survey was to evaluate the knowledge and attitude of Italian implantologists regarding RPI. Methods: An anonymous questionnaire was sent via email to implantologists randomly selected, including a section about demographic information and questions related to RPI origin, radiographic representation, symptoms and treatment options. All questions were multiple answer and close-ended. Binomial logistic regression was performed to investigate the relationship between correct answers and the following independent variables: age, years of experience and number of dental implants placed per year. Results: In total, 475 implantologists completed the questionnaire, with a response rate of 46.3%. Based on the results of the study, incorrect answers were associated with less experienced participants (&lt, 80 implants/year) for all questions evaluated, with the exception of treatment strategies. Furthermore, 26.7% of the survey takers did not recognize radiographic representation of RPI and 35.5% picked &ldquo, implant removal&rdquo, when asked about treatment modality. Conclusions: The majority of participants were able to recognize symptoms and indicated the probable causes of RPI, however, around 30% of them showed very limited knowledge of available management strategies.

A minimally invasive implant treatment approach for future full arch implant prosthetic rehabilitations of trophic jaws represents a challenge. An optimal implant planning is strongly related with an accurate merge of the prosthetic information and the radiographic data. To comply with that, most computer aided implantology (CAI) systems require additional steps, as radiographic stents or fiducial markers to overlap digital jaw scans to cone beam computed tomography (CBCT) data. Using dynamic CAI, residual teeth (up to three) make it possible for the merge to avoid new radiographic scans. An additional challenge is the treatment involving immediate implants compared with delayed implants placed into healed bone. As for other static CAI systems, the operator&rsquo, s experience and the quality of the CBCT data make the planning affordable and secure the entire implants placement procedure. The literature reports accuracies in terms of comparison between placed implants and planned implants, following a double CBCT approach, based on radiographic volume overlapping. Thirteen consecutive future totally edentulous patients (77 implants), divided into two groups (group A: 3&ndash, 4 teeth traced, group B: 5&ndash, 6 teeth traced) requiring a full arch implant prosthetic rehabilitation were included in the reported case series. A dynamic CAI was used to plan and to place all implants following all the recommended digital steps. The software used provided a tool (Trace and Place) that made the merge between X-ray views of the residual teeth and their own positions possible. This method definitely registered that teeth positions comply with the required accuracy live check. After implants placement, a post-operative CBCT was taken in order to evaluate the deviations of the achieved implants at coronal, apical, and depth level as well as angular deviations. Statistically significant radiological mean difference between the two groups was found in the coronal position of implants (0.26 mm, p &lt, 0.001), in the apical position of implants (0.29 mm, p &lt, 0.001), in the depth of implants (0.16 mm, p = 0.022), and in the angular deviation (0.7, p = 0.004). The use of the TaP technology for the treatment of the patients with at least three stable teeth that need to be removed for a totally implant prosthetic treatment is a promising technique. The performed accuracy analysis demonstrated that this digital protocol can be used without a loss of accuracy of the achieved implants compared to planned ones.

Background: Recent articles have hypothesized a possible correlation between dental implants dissolution products and peri-implantitis. The null hypothesis tested in this case-control study was that there would be no differences in salivary concentrations of titanium (Ti), vanadium (V), nickel (Ni) and arsenic (As) ions among patients with dental implants, healthy (Group A) or affected by peri-implantitis (Group B), compared to subjects without implants and/or metallic prosthetic restorations (Group C). Methods: Inductively coupled plasma mass spectrometry was used to analyze saliva samples. One-way repeated-measure analysis of variance (ANOVA) was used to identify statistically significant differences in the salivary level of Ti, V, Ni and As between the three groups. Results: A total of 100 patients were enrolled in the study (42 males and 58 females), distributed in three groups: 50 patients in Group C, 26 patients in Group B and 24 patients Group B. In our study, concentrations of metallic ions were higher in Group A and B, compared to the control group, with the exception of vanadium. However, there were no statistically significant differences (p &gt, 0.05) for metallic ions concentrations between Group A and Group B. Conclusions: Based on our results, there are no differences in titanium or other metals concentrations in saliva of patients with healthy or diseased implants.

The present short communication described a new procedure for the reconstruction of the horizontal severely resorbed edentulous maxilla with custom-made deproteinized bovine bone block, fabricated using three-dimensional imaging of the patient and computer-aided design/computer-aided manufacturing (CAD/CAM) technology. The protocol consisted of three phases. In the diagnosis and treatment planning, cone-beam computed tomographic scans of the patient were saved in DICOM (digital imaging and communication in medicine) format, anatomic and prosthetic data were imported into a dedicated diagnostic and medical imaging software, the prosthetic-driven position of the implants, and the graft blocks perfectly adapted to the residual bone structure were virtually planned. In the manufacturing of customized graft blocks, the CAD-CAM technology and the bovine-derived xenohybrid composite bone (SmartBone® on Demand - IBI SA - Industrie Biomediche Insubri SA Switzerland) were used to fabricate the grafts in the exact shape of the 3D planning virtual model. In the surgical and prosthetic procedure, the maxillary ridge augmentation with custom-made blocks and implant-supported full-arch screw-retained rehabilitation were performed. The described protocol offered some advantages when compared to conventional augmentation techniques. The use of deproteinized bovine bone did not require additional surgery for bone harvesting, avoided the risk of donor site morbidity, and provided unlimited biomaterial availability. The customization of the graft blocks reduced the surgical invasiveness, shorting operating times because the manual shaping of the blocks and its adaptation at recipient sites are not necessary and less dependent on the clinician’s skill and experience.

Background/aim Intensity modulated radiotherapy (IMRT) has been compared with three-dimensional conformal radiotherapy (3D-CRT) in randomized clinical trials for head and neck squamous cell carcinoma (HNSCC). The aim of this meta-analysis was to evaluate the efficacy and toxicity of IMRT and 3D-CRT and identify differences in grade ≥2 xerostomia incidence and clinical outcomes. Materials and methods The preferred reporting items for systematic reviews and meta-analyses (PRISMA) statement was applied. Random-effects models were used. Primary endpoint was xerostomia of grade 2 or worse. Secondary endpoints were overall survival (OS) and loco-regional control (LRC). Results Three randomized clinical trials representing 213 patients were identified. Global, grade ≥2 acute xerostomia and late xerostomia at 1 and 2 years after treatment were reduced with the IMRT technique (RR=0.71, 95%CI=0.59-0.86, RR=0.45, 95%CI=0.31-0.65 and RR=0.26, 95%CI=0.15-0.46, respectively). IMRT was not associated with significant OS and LRC improvement compared with 3D-CRT, with OR of 0.70 (95%CI=0.39-1.24; p=0.22) and 1.50 (95%CI=0.75-2.98; p=0.25). Conclusion This meta-analysis explored the value of IMRT compared to 3D-CRT and confirmed the superiority of IMRT over 3D-CRT in terms of grade ≥2 xerostomia rates, but not on clinical outcomes. Its positive impact on tumor control and survival remains to be proven.

Dental implants are one of the most commonly used ways to replace missing teeth. Nevertheless, the close contact with hard and soft oral tissues expose these devices to infectious peri-implant diseases. To prevent such infection, several surface treatments have been developed in the last few years to improve the antimicrobial properties of titanium dental implants. In this in-vitro pilot study, the antimicrobial activity of titanium surfaces coated with different types of graphene nanoplatelets are investigated. Six different colloidal suspensions of graphene nanoplatelets (GNPs) were produced from graphite intercalated compounds, setting the temperature and duration of the thermal shock and varying the number of the exfoliation cycles. Titanium disks with sand-blasted and acid-etched surfaces were sprayed with 2 mL of colloidal GNPs suspensions. The size of the GNPs and the percentage of titanium disk surfaces coated by GNPs were evaluated through a field emission-scanning electron microscope. The antibacterial activity of the specimens against Staphylococcus aureus was estimated using a crystal violet assay. The dimension of GNPs decreased progressively after each sonication cycle. The two best mean percentages of titanium disk surfaces coated by GNPs were GNPs1050&deg, /2 and GNPs1150&deg, /2. The reduction of biofilm development was 14.4% in GNPs1150&deg, /2, 20.1% in GNPs1150&deg, /3, 30.3% in GNPs1050&deg, /3, and 39.2% in GNPs1050&deg, /2. The results of the study suggested that the surface treatment of titanium disks with GNPs represents a promising solution to improve the antibacterial activity of titanium implants.

Objectives To compare, using an ex vivo model, the biofilm removal of three surface decontamination methods following surgical exposure of implants failed for severe peri-implantitis. Materials and methods The study design was a single-blind, randomized, controlled, ex vivo investigation with intra-subject control. Study participants were 20 consecutive patients with at least 4 hopeless implants, in function for >12 months and with progressive bone loss exceeding 50%, which had to be explanted. Implants of each patient were randomly assigned to the untreated control group or one of the three decontamination procedures: mechanical debridement with air-powder abrasion, chemical decontamination with hydrogen peroxide and chlorhexidine gluconate, or combined mechanical-chemical decontamination. Following surgical exposure, implants selected as control were retrieved, and afterwards, test implants were decontaminated according to allocation and carefully explanted with a removal kit. Microbiological analysis was expressed in colony-forming-units (CFU/ml). Results A statistically significant difference (p < 0.001) in the concentrations of CFU/ml was found between implants treated with mechanical debridement (531.58 ± 372.07) or combined mechanical-chemical decontamination (954.05 ± 2219.31) and implants untreated (37,800.00 ± 46,837.05) or treated with chemical decontamination alone (29,650.00 ± 42,596.20). No statistically significant difference (p = 1.000) was found between mechanical debridement used alone or supplemented with chemical decontamination. Microbiological analyses identified 21 microbial species, without significant differences between control and treatment groups. Conclusions Bacterial biofilm removal from infected implant surfaces was significantly superior for mechanical debridement than chemical decontamination. Clinical relevance The present is the only ex vivo study based on decontamination methods for removing actual and mature biofilm from infected implant surfaces in patients with peri-implantitis.

Background The insertion of dental implants in the atrophic posterior maxilla can be a challenge. One option is to modify the residual native bone in preparation for proper, prosthetically-driven implant placement. The procedure presented in this study is called Navigated Antral Bone Expansion (N.A.B.E). This procedure employs the use of a navigation system to plan and guide the initial pilot drilling, bone expansion, final site preparation, and implant insertion. The aim of this study was to compare the distance between the alveolar ridge and the sinus floor measured before and after the surgery performed using the N.A.B.E. technique. Methods Thirty-seven partially edentulous patients who were candidates for implant supported restoration in the posterior maxilla, with a bone height ranging from 4 to 7 mm were enrolled. The N.A.B.E procedure was used to increase the bone height. Paired-samples t-test evaluated the distance between the alveolar ridge and the sinus floor measured before and after surgery. The occurrence of post-surgical complications, and the angular deviation between the planned osteotomy and the actual placed implant trajectories were evaluated. Results Out of the 37 consecutive patients enrolled in the study, 35 were considered in the data analyses. Patients’ bone height after surgery compared to the bone height before surgery showed a statistically significant increase (p 0 to 34.900 (mean 25.170 ± 5.100). Conclusions This study provides evidence that N.A.B.E. technique is able to provide a significant bone increase, and could be considered an alternative method to the management of the atrophic posterior maxilla with a minimally invasive approach.

Purpose. To report the supracrestal bone regeneration of approximately 10 mm using solvent-dehydrated mineralized cancellous bone allograft and nonresorbable membrane in rehabilitation of unsuccessful implants in the anterior maxilla and stability of the regenerated bone at the 14th-year follow-up. Case Presentation. A 24-year-old female patient with a history of anterior dentoalveolar trauma resulting in the loss of upper left incisors and canine underwent rehabilitation several years ago with three implant-supported fixed prostheses. The prosthesis was both functionally and aesthetically inadequate, and the patient complained of gingival swelling, bleeding, and food impaction at the site of the implants. A staged approach for retreatment was planned, wherein the first surgical stage aimed at removing the existing implants and preparing the bone ridge and soft tissues for the augmentation procedure. The second stage was vertical ridge augmentation and simultaneous prosthetic-driven placement of two new implants at the sites of the left central incisor and canine. After nine months of uneventful healing, complete regeneration of the bony defect was achieved, and the new prosthetic rehabilitation satisfied both functional and aesthetic requirements. Conclusion. The therapeutic approach followed in the present case proved effective in achieving satisfactory functional and aesthetic results and in maintaining the stability of the regenerated bone at 14 years of follow-up.

Background The aim of this survey was to evaluate the knowledge and awareness of parents about potential oral health risk factors and correct management of oral hygiene of their preschool children. Material and Methods The participation to the survey was proposed to all parents of 3-5 year aged children attending a kindergarten in Campobasso. A self-administered questionnaire was completed to obtain information regarding demographic and education variables, knowledge about caries and its transmission, infant feeding practice, maternal oral health during pregnancy, parents and children's oral hygiene habits and risk behaviors (e.g., sharing cutlery, tasting of baby food, nightly using of baby bottles or pacifier), oral health prevention and role of school. Results Overall, the parents of 101 children consented to fill the questionnaire. Data analysis showed that only 24% of respondents was aware of the potential vertical transmissibility of cariogenic bacteria through contaminated saliva. It is still a common trend from 61% of parents tasting food of their child. On 101 children, 30% used pacifier and 17% used baby bottle with milk during night and among these children 41% for more than 2 years. Parents reported no toothbrushing for 57% of the children in their first 3 years of life. Conclusions From this survey, independently on parents education, it emerges as still nowadays parents are not fully trained and informed about the management of their child's oral hygiene and as it's necessary a parental oral health promoting program to control children oral health risk status, starting from school. Key words:Oral health, pre-school children, dental caries, oral prevention.

Introduction The aim of this work was to analyze data of patients with failed or delayed eruption of first and second permanent molars, to assess the effectiveness of the treatment methods used. Methods Epidemiologic and clinical data of 125 patients (mean age 14.08 ± 4.04 years) with 197 affected molars (30 first and 167 second molars) were retrospectively analyzed. The treatment outcome was known in 161 molars after patient drop-out (20 patients with 36 molars). The cases were categorized into 8 groups according to the choice of treatment: orthodontic uprighting, surgical-orthodontic uprighting, surgical uprighting, surgical repositioning, surgical exposure, first or second molar extraction, third molar extraction, or removal of pathologic conditions. Results The overall treatment outcome was positive in 141 molars (87.6%). It was positive in all cases treated with orthodontic uprighting (7 molars), surgical exposure (10 molars), surgical uprighting (38 molars), and surgical repositioning (8 molars), but it was significantly lower for surgical-orthodontic uprighting (34/48 molars, 70.8%). The positive outcome was significantly lower for inclusion (52/68 molars, 76.5%) than for early-diagnosed condition (11/11 molars, 100%) and retention (78/82 molars, 95.1%), and for total bone crown coverage (21/28 molars, 75.0%) than for osteomucosal or mucosal crown coverage (120/133 molars, 90.2%). Conclusions This study demonstrates that an early diagnosis results in a better outcome regardless of the treatment used, with the number of cases with a positive outcome being higher in younger patients.

The strict link between periodontitis (PD) and rheumatoid arthritis (RA) has been widely demonstrated by several studies. PD is significantly more frequent in RA patients in comparison with healthy subjects: this prevalence is higher in individuals at the earliest stages of disease and in seropositive patients. This is probably related to the role of P. gingivalis in inducing citrullination and leading to the development of the new antigens. Despite the many studies conducted on this topic, there is very little data available concerning the possibility to use the same biomarkers to evaluate both RA and PD patients. The aim of the review is to summarize this issue. Starting from genetic factors, data from literature demonstrated the association between HLA-DRB1 alleles and PD susceptibility, similar to RA patients; moreover, SE-positive patients showed simultaneously structural damage to the wrist and periodontal sites. Contrasting results are available concerning other genetic polymorphisms. Moreover, the possible role of proinflammatory cytokines, such as TNF and IL6 and autoantibodies, specifically anticyclic citrullinated peptide antibodies, has been examined, suggesting the need to perform further studies to better define this issue.

Background. Adenomatoid odontogenic tumor (AOT) is a relatively uncommon benign neoplasm of odontogenic epithelial origin, accounting for less than 5% of odontogenic tumors. Case Report. The reported case describes morphological characteristics, clinical course, radiographic and histopathological features, and surgical therapy of an extrafollicular variant of AOT in the maxillary posterior region. An asymptomatic swelling on the left side in the posterior region of the maxilla, gradually increased since approximately 12 months, developed in a 16-year-old Caucasian female patient. Radiographic images revealed a well-defined, unilocular radiolucency, with some small foci of radiopacity inside, and root resorption of the first and second molars. On the base of the histological examination of the specimen retrieved by incisional biopsy, the diagnosis of AOT was made, and the conservative surgical enucleation of the lesion was performed. Discussion. The present case was reported in agreement with an extensive review, in which it was recommended to discontinue reporting classic follicular cases because their clinicopathological profile was well-known, but to continue reporting well-documented cases of the extrafollicular variant, with indication of the exact position. Conclusion. The present case was reported in order to expand the knowledge about the clinical behavior and surgical treatment of the extrafollicular variant of AOT.

Objectives. To evaluate the performances of six different bone substitute materials used as graft in maxillary sinus augmentation by means of histological and histomorphometric analysis of bone biopsies retrieved from human subjects after a 6-month healing period. Materials and Methods. Six consecutive patients (3 males, 3 females, aged 50-72 years), healthy, nonsmokers, and with good oral hygiene, presenting edentulous posterior maxilla with a residual bone crest measuring ≤ 4 mm in vertical height and 3 to 5 mm in horizontal thickness at radiographic examination, were selected to receive sinus augmentation and delayed implant placement. Under randomized conditions, sinus augmentation procedures were carried out using mineralized solvent-dehydrated bone allograft (MCBA), freeze-dried mineralized bone allograft (FDBA), anorganic bovine bone (ABB), equine-derived bone (EB), synthetic micro-macroporous biphasic calcium-phosphate block consisting of 70% beta-tricalcium phosphate and 30% hydroxyapatite (HA-β-TCP 30/70), or bioapatite-collagen (BC). After 6 months, bone core biopsies were retrieved and 13 implants were placed. Bone samples were processed for histological and histomorphometric analysis. CT scans were taken before and after surgery. After 4 months of healing, patients were restored with a provisional fixed acrylic resin prosthesis, as well as after further 2-4 months with a definitive cemented zirconia or porcelain-fused-to-metal crowns. Results. There were no postoperative complications or implant failures. The histological examination showed that all biomaterials were in close contact with newly formed bone, surrounding the graft granules with a bridge-like network. No signs of acute inflammation were observed. The histomorphometry revealed 20.1% newly formed bone for MCBA, 32.1% for FDBA, 16.1% for ABB, 22.8% for EB, 20.3% for HA-β-TCP 30/70, and 21.4% for BC. Conclusions. Within the limitations of the present investigation, all the six tested biomaterials showed good biocompatibility and osteoconductive properties when used in sinus augmentation procedures, although the FDBA seemed to have a better histomorphometric result in terms of newly formed bone and residual graft material. This trial is registered with ClinicalTrials.gov Identifier (Registration Number): NCT03496688.

Objectives. The aim of this study was to determine the effectiveness of preoperative administration of single-dose of paracetamol-codeine, in the relieving of acute postoperative pain after the surgical removal of an impacted mandibular third molar. Materials and Methods. The study cohort consisted of 32 Caucasian outpatients, giving a total of 64 bilateral symmetrical impacted mandibles. Patients were randomized in two experimental groups to receive a preoperative oral dose of paracetamol-codeine (analgesic group) or a placebo (placebo group) at the first and second surgeries. Study participants were asked to record pain intensity scores during the operation and the next 2 days, the time of the first request for rescue analgesic, and the total number of postoperative-supplement paracetamol-codeine tablets. Results. The pain intensity score on the first day was significantly lower in the analgesic group than in the placebo group (p<0.001). The time to using rescue therapy was significantly longer in the analgesic group than in the placebo group (p=0.004). The number of paracetamol-codeine tablets used postoperatively did not differ between the analgesic and placebo groups (p=0.104). Conclusions. Preoperative paracetamol-codeine is effective in providing immediate postoperative pain control after third molar surgery and in delaying the initial onset of pain. This trial is registered with ClinicalTrials.gov Identifier (Registration Number): NCT03049878.

In the case reports, two different approaches have been described to treat the developmental disturbances in the maxillary central incisors due to trauma to its predecessor. The treatment plan was chosen according to the type and severity of the malformations, the exact location and the morphology of the involved teeth. In the first case, the disimpaction of the maxillary right central incisor was achieved with the combined of surgical and orthodontic therapy, that was planned in two consecutive stages. In the second case the severe root angulation and the failure of the previous orthodontic traction made impossible the repositioning of the upper right central incisor, which was surgical removed.

To evaluate the effect of orthodontic stainless steel brackets and two different types of archwires on the diagnostic quality of 3-T MR images.This prospective, case-control study was conducted following Strengthening the Reporting of Observational Studies in Epidemiology guidelines. The recruitment was conducted among orthodontic patients. 80 subjects, requiring MRI for the presence of temporomandibular disorders, were enrolled and divided into four groups: 20 patients using aligners (control group); 20 patients with stainless steel brackets without archwires; 20 patients with stainless steel brackets and nickel-titanium archwires; and 20 patients with stainless steel brackets and stainless steel archwires. Two experts in neuroradiology evaluated the images to determine the amount of distortion in 6 regions and 48 districts. A score was subjectively assigned according to a modified receiver operating characteristic method of distortion classification. Any disagreement was resolved through consensus seeking; when this was not possible, a third neuroradiologist was consulted. The following statistical methods were used: descriptive statistics, Cohen's kappa coefficient (k), Kruskal-Wallis test, pairwise comparisons using the Dunn-Bonferroni approach. The significance was set at p ≤ 0.05.The presence of stainless steel brackets with or without archwires negatively influenced MRI of the cervical region, paranasal sinuses, head and neck region, and cervical vertebrae but did not influence MRI of brain and temporomandibular joint regions.Patients with a stainless steel multibracket orthodontic appliance should remove it before cervical vertebrae, cervical region, paranasal sinuses, and head and neck MRI scans. The brain and temporomandibular joint region MRI should not require the removal of such appliances.

Background: Different sources of cultured cells combined with different scaffolds (allogenic, xenogeneic, alloplastic or composite materials) have been tested extensively in vitro and in preclinical animal studies, but there have been only a few clinical trials involving humans. Aim: This study reviewed all of the English language literature published between January 1990 and December 2015 to assess the histological performance of different mesenchymal cell-scaffold constructs used for bone regeneration in human oral reconstructive procedures. Methods: An electronic search of the MEDLINE and Cochrane Central Register of Controlled Trials databases complemented by manual searching was conducted to identify studies involving histological evaluation of mesenchymal cell-scaffold constructs in human oral surgical procedures. The methodological quality of randomized controlled clinical trials and controlled clinical trials was assessed using the Cochrane Collaboration tool for assessing the risk of bias. Heterogeneity was assessed using Review Manager software. Considering the heterogeneity, the data collected were reported by descriptive methods and a meta-analysis was applied only to the articles that reported the same outcome measures. The articles were classified and described based on the material scaffolds used. Results: The search identified 1030 titles and 287 abstracts. Full-text analysis was performed for 32 articles, revealing 14 studies that fulfilled the inclusion criteria. Three randomized controlled clinical trials were identified as potentially eligible for inclusion in a meta-analysis. The studies were grouped according to the scaffold materials used: bone allograft (three studies), polyglycolic-polylactic scaffold (four studies), collagen sponge (two studies), and bovine bone matrix (five studies). The stem cells used in these studies had been sourced from the iliac crest, periosteum, dental pulp and intraoral sites. Conclusions: The very small amount of available data makes it impossible to draw any firm conclusions regarding the increase in bone formation in human oral reconstructive procedures when using graft materials engineered with autogenous stem cells.

To evaluate the use of 3.0 T MRI in the prognosis of inferior alveolar nerve (IAN) sensory disorders after mandibular third molar extraction, in the early post-operative period.343 IANs were examined before and 3 days after surgery. Two radiologists evaluated the course of the nerve and the relative signal intensity (RSI). Cohen's kappa coefficient (κ) and intraclass correlation coefficient (ICC) were used to evaluate the interobserver (k = 0.891) and intra-observer variability (ICC = 0.927; 0.914, respectively). The IANs were divided into four groups on the basis of neurosensory disorders recovery time. ANOVA was used to evaluate the differences among the RSIs of the four groups, and multiple comparisons were performed with Tukey's range test.No differences in the course of IANs were found before and after surgery. In 280 IANs, no iatrogenic paraesthesia was found (Group A). 63 IANs showed a neurosensory impairment. 38 IANs showed recovery of post-operative paraesthesia at 3-month follow-up (Group B). 16 IANs showed a full recovery of iatrogenic paraesthesia at 6-month follow-up (Group C). Seven IANs displayed a full recovery at 12-month follow-up and two IANs showed persistence of neurosensory disorders at 18-month follow-up (Group D). The one-way ANOVA results indicated statistically significant difference among all groups (p 0.05), except between Groups C and D (p = 0.504).The early evaluation of RSI values represents a valid tool to determine the prognosis of IAN sensory disorders after mandibular third molar extraction.

OBJECTIVES To assess the value of 3-Tesla (3-T) MR imaging (MRI) in the evaluation of the course of the intracranial and extra-cranial tracts of the facial nerve. PATIENTS AND METHODS 83 patients were studied by MRI in order to detect the course of facial nerve; a total of 166 facial nerves were examined. T2-weighted 3D Fast imaging employing steady-state acquisition (FIESTA) and T1-weighted Fast spoiled gradient recalled echo (fast SPRG) sequences were used. Two radiologists (reader A and B), independently, evaluated the course of the tracts of the facial nerve according to a qualitative scale (excellent, good, fair, poor). The Intraclass Correlation Coefficient (ICC) and Pearson correlation coefficient were used to assess the intra-observer and interobserver variability in the nerve course evaluation. RESULTS Reader A evaluated 35 facial nerves as excellent, 94 as good, 33 as fair and 4 as poor. Reader B rated 31 facial nerves excellent, 89 good, 43 fair and 3 poor. The intraobserver variability was ICC = 0.919 in reader A and ICC = 0.842 in reader B. The interobserver variability (Pearson correlation coefficient) was 0.713 (p ≤ 0.01). CONCLUSIONS According to the preliminary results of our study the use of 3-T MRI with FIESTA and fast SPGR sequences may allow the study of the course of the facial nerve and its branches. The knowledge of the course and of the anatomic relationships of these nerve bundles with surrounding structures, as well as of the anatomical variants, provide useful informations for a prompt neurosurgery and maxillofacial surgical planning.

The aim of this prospective study was to compare dynamic and static sequences in the evaluation of temporomandibular joint disorders using a 3.0 -T imaging unit.194 patients were evaluated by static (double echo proton density weighted/turbo spin echo T2 weighted sequences) and dynamic (half-Fourier single-shot turbo spin echo sequences)imaging. Two radiologists evaluated in consensus the quality of images, the disc position and morphological alterations. The Kendall rank correlation coefficient (τ-b) was used to compare the qualitative rating between static and dynamic sequences. Cohen's kappa coefficient (k) was used to assess the agreement of disc position and morphological alterations between both sequences. The intraclass correlation coefficient was used to calculate the intraobserver variability. The significance was set at p ≤ 0.05.The correlation between both sequences in the qualitative evaluation was τ-b = 0.632. The agreement between both techniques in the evaluation of disc position was k = 0.856. The agreement between both techniques in assessing the morphological alterations was k = 0.487. In the static sequences, the intraclass correlation coefficient was 0.915 in the qualitative evaluation, 0.873 in the evaluation of disc position and 0.934 in the assessment of morphological alterations. In the dynamic sequences, the intraclass correlation coefficient was 0.785 in the qualitative evaluation, 0.935 in the evaluation of disc position and 0.826 in the assessment of morphological alterations.Static imaging remains the gold standard in the evaluation of the temporomandibular joint. Dynamic imaging is a valuable tool that can provide additional information about topographic changes in the disc-condyle relationship.

Objective. The aim of this study was to validate the role of diffusion-weighted imaging (DWI) at 3 Tesla in the differential diagnosis between benign and malignant laterocervical lymph nodes in patients with head and neck squamous cell carcinoma (HNSCC).Materials and Methods. Before undergoing surgery, 80 patients, with biopsy proven HNSCC, underwent a magnetic resonance exam. Sensitivity (Se) and specificity (Spe) of conventional criteria and DWI in detecting laterocervical lymph node metastases were calculated. Histological results from neck dissection were used as standard of reference.Results. In the 239 histologically proven metastatic lymphadenopathies, the mean apparent diffusion coefficient (ADC) value was 0.903 × 10−3 mm2/sec. In the 412 pathologically confirmed benign lymph nodes, an average ADC value of 1.650 × 10−3 mm2/sec was found. For differentiating between benign versus metastatic lymph nodes, DWI showed Se of 97% and Spe of 93%, whereas morphological criteria displayed Se of 61% and Spe of 98%. DWI showed an area under the ROC curve (AUC) of 0.964, while morphological criteria displayed an AUC of 0.715.Conclusions. In a DWI negative neck for malignant lymph nodes, the planned dissection could be converted to a wait-and-scan policy, whereas DWI positive neck would support the decision to perform a neck dissection.