Search

The purpose of this study was to assess the feasibility of SEMAC + VAT to reduce artifacts induced by dental implant-supported restorations, such as its impact on the image quality. Dental-implant supported restorations were installed in a dry mandible. Magnetic resonance scans were acquired on a 3-Tesla MRI system. Artifact suppression (SEMAC + VAT) was applied with different intensity modes (weak, moderate, strong). Artifacts assessment was performed by measuring the mandible volume increase in MRI images prior (reference dataset) and after installation of dental implant-supported prosthesis. Image quality was assessed by two examiners using a five-point scale. Inter-examiner concordance and correlation analysis was performed with Cronbach’s alpha and Spearman’s test with a significance level at p = 0.05. Mandible volume increased by 60.23% when no artifact suppression method was used. By applying SEMAC + VAT, the volume increase ranged from 17.13% (strong mode) to 32.77% (weak mode). Visualization of mandibular bone was positively correlated with SEMAC intensity degree. SEMAC + VAT reduced MRI artifacts caused by dental-implant supported restorations. A stronger suppression mode improved visualization of mandibular bone in detriment of the scanning time.

Some microorganisms are associated with the formation and deposition of pigmentation on dental surfaces, and its localization, intensity and recurrence persistence can introduce aesthetic disorders. Carbamide peroxide is a bleaching agent that also presents antimicrobial properties. This case report addresses a ten-year clinical follow-up, showing a possible influence of a bleaching procedure protocol on alterations of oral microbiota. Although a bleaching treatment does not have the purpose to alter the oral microbiota, a drastic reduction and recurrence of black tooth stains was observed in this case.

Purpose: The purpose of this study was to evaluate the behavior of mandibular canines acting as abutment teeth and indirect retainers of a Kennedy class II according to different designs: lingual rest and lingual rest associated with a reciprocal arm. Materials & methods: A resin cast with two simulated canine teeth was made in Ni-Cr alloy, representing a Kennedy class II mandibular arch. With the objective of simulating the resilience of the periodontal ligament, a polyurethane layer was added at the canine tooth's root. A metallic framework of Co-Cr alloy was fabricated with a T bar clasp and a lingual rest associated with a reciprocal arm. To obtain the second framework, the reciprocal arm was removed using a tungsten bur. Each framework was submitted to tensile force using a VersaTest machine. The magnitude and direction of canine movement during removal of the framework was measured using two dial gauges (mm). The axial tensile force required to remove the experimental framework (N) was also evaluated. The data were compared using the paired t-test with 95% confidence intervals. Differences were considered significant at P < .05. Results: The mean retentive force of the modified design framework with the reciprocal arm was significantly higher (P < .0001) than that of the framework with the lingual rest. The abutment teeth showed movement in the lingual and mesial directions, and this movement was less when associated with the reciprocal arm design. Conclusion: The reciprocal arm in association with a lingual rest in the framework decreased the movement of the abutment teeth when analyzed in the bucco-lingual and mesio-distal directions and contributed to increased retention by friction.

Bone grafting provides ideal conditions to the patient's rehabilitation with dental implants. In addition, prototyped tridimensional models allow the surgical procedure to be simulated and enable important anatomic structures to be visualized. To present a bone defect rehabilitated with xenogenic bone preshaped on a stereolithographic model and the follow-up after 7 years of treatment. The present case report describes a bone defect rehabilitated with a lyophilized bone block preshaped on a stereolithographic model. The patient, a 56-year-old woman, was referred to the dental office presenting a bone defect in the anterior maxilla. Bone regeneration intervention was performed with xenogenic grafting and barrier membrane. The follow-up of the postoperative period and after 7 years is presented. After 7 years, the tomographic exam showed the maintenance of bone at the grafted site, representing the long-term success of the treatment.

The aim of the present study was to perform a software-assisted radiographic assessment of the effect of platform-switching on marginal bone loss (MBL) around dental implants. Forty patients requiring a dental implant in non-grafted partially edentulous mandibles were enrolled and categorized into implants receiving a platform-matched abutment (control group) or implants with a platform-switched abutment (test group). Standardized digital periapical radiographs were taken at the time of implant placement (T0), at implant loading (T1) and 1-year after functional loading (T2). Software-assisted radiographic assessment of the MBL horizontal, vertical and area changes was performed and compared between time intervals (T1-T0, T2-T1 and T2-T0). Mean radiographic horizontal MBL (hMBL) and vertical MBL (vMBL) from implant placement to 1-year after implant loading (T2-T0) were significantly increased around platform-matched when compared to platform-switched abutments (1.04 mm vs 0.84 mm, p

The present study evaluated the interchangeability of prosthetic components for external hexagon implants by measuring the precision of the implant/abutment (I/A) interface with scanning electron microscopy. Ten implants for each of three brands (SIN, Conexão, Neodent) were tested with their respective abutments (milled CoCr collar rotational and non-rotational) and another of an alternative manufacturer (Microplant) in randomly arranged I/A combinations. The degree of interchangeability between the various brands of components was defined using the original abutment interface gap with its respective implant as the benchmark dimension. Accordingly, when the result for a given component placed on an implant was equal to or smaller then that gap measured when the original component of the same brand as the implant was positioned, interchangeability was considered valid. Data were compared with the Kruskal-Wallis test at 5% significance level. Some degree of misfit was observed in all specimens. Generally, the non-rotational component was more accurate than its rotational counterpart. The latter samples ranged from 0.6-16.9 µm, with a 4.6 µm median; and the former from 0.3-12.9 µm, with a 3.4 µm median. Specimens with the abutment and fixture from Conexão had larger microgap than the original set for SIN and Neodent (p

This study evaluated, in vivo, the efficacy of a denture glazing material (Palaseal) in modifying plaque colonization of dentures. Ten subjects were selected and received maxillary temporary partial removable dentures, with complete acrylic palatal coverage. The right half of the fitting surface of the denture bases were glazed with Palaseal, whereas the other half was not glazed. One month after insertion, two fragments of the resin base of all dentures were removed (one from the glazed side and another from the non-glazed side). These samples were prepared and examined by scanning electron microscopy. Three months after insertion, other fragments were obtained and analyzed. Microscopic observation at 1 month revealed that, for all patients, the plaque film was thinner on the treated side in comparison to the non-treated side. However, at the 3-month evaluation, some areas of the glaze showed cracking, and both glazed and non-glazed sides were covered by a dense bacterial plaque film. In conclusion, the findings of this clinical experiment showed that glazing denture's fitting surface did not prevent bacterial colonization, but favored plaque removal while the glaze layer remained intact. After three months, glaze cracks created microretentive areas that increased plaque accumulation. Este estudo avaliou, in vivo, a eficiência de um glaze para bases protéticas (Palaseal) em modificar a colonização microbiana de próteses. Dez indivíduos foram selecionados e receberam próteses removíveis maxilares provisórias, com cobertura total do palato em acrílico. A metade direita da superfície interna das bases protéticas foi glazeada com Palaseal enquanto a outra metade ficou sem glaze. Um mês após a instalação, dois fragmentos foram removidos de todas as bases protéticas (um do lado glazeado, outro do lado não glazeado). Estas amostras foram preparadas e examinadas em microscopia eletrônica de varredura. Três meses após a instalação, outros fragmentos foram removidos e analisados. Observações microscópicas após 1 mês revelaram que, para todos os pacientes, a placa era menos espessa do lado tratado, em comparação ao lado não-tratado. Entretanto, observações aos 3 meses mostraram que áreas do glaze haviam trincado e, tanto o lado glazeado como o lado não-glazeado estavam cobertos por uma densa camada de placa bacteriana. Os achados desse estudo clínico demonstraram que o glazeamento da superfície interna da prótese não impediu a colonização bacteriana, mas favoreceu a remoção da placa enquanto a camada de glaze esteve intacta. Decorridos 3 meses, o glaze sofreu trincas, criando áreas de microretenção que aumentaram o acúmulo de placa.