Search

Gd3+- free carbon dots (CDs) were synthesized by one-step solvothermal method using urea, citric acid and 3-(trifluoromethyl)aniline as precursors. Additionally, Gd3+-doped CDs were prepared by incorporating gadolinium chloride (Gd3+ ions) into the synthesis. Size selection of the purified CDs was achieved through filter membranes ranging from 3 kDa to 100 kDa. The chemical composition and optical properties of the obtained samples were characterized by Energy dispersive X-ray (EDX), Fourier-transform infrared spectroscopy (FTIR), Dynamic Light Scattering (DLS), proton relaxation time measurements, Ultraviolet–visible (UV-vis) and fluorescence spectroscopies. A comparative analysis revealed a strong size-dependent behavior in the optical properties of both Gd3+-doped and Gd3+-free CDs. Furthermore, in vitro tests confirmed the non-cytotoxicity of Gd3+-doped CDs, indicating their potential applicability in biomedicine for magnetic resonance imaging (MRI) and red fluorescence-based cell and tissue imaging. [ABSTRACT FROM AUTHOR]

Nitrogen- and oxygen-containing carbon nanoparticles (O, N-CDs) were prepared by a facile one-step solvothermal method using urea and citric acid precursors. This method is cost-effective and easily scalable, and the resulting O, N-CDs can be used without additional functionalization and sample pretreatment. The structure of O, N-CDs was characterized by TEM, AFM, Raman, UV-vis, and FTIR spectroscopies. The obtained O, N-CDs with a mean diameter of 4.4 nm can be easily dispersed in aqueous solutions. The colloidal aqueous solutions of O, N-CDs show significant photothermal responses under red-IR and radiofrequency (RF) irradiations. The as-prepared O, N-CDs have a bright temperature-dependent photoluminescence (PL). PL/PLE spectral maps were shown to be used for temperature evaluation purposes in the range of 30–50 °C. In such a way, the O, N-CDs could be used for biomedicine-related applications such as hyperthermia with simultaneous temperature estimation with PL imaging. [ABSTRACT FROM AUTHOR]

A new generation of sensors can be engineered based on the sensing of several markers to satisfy the conditions of the multimodal detection principle. From this point of view, photoacoustic-based sensing approaches are essential. The photoacoustic effect relies on the generation of light-induced deformation (pressure) perturbations in media, which is essential for sensing applications since the photoacoustic response is formed due to a contrast in the optical, thermal, and acoustical properties. It is also particularly important to mention that photoacoustic light-based approaches are flexible enough for the measurement of thermal/elastic parameters. Moreover, the photoacoustic approach can be used for imaging and visualization in material research and biomedical applications. The advantages of photoacoustic devices are their compact sizes and the possibility of on-site measurements, enabling the online monitoring of material parameters. The latter has significance for the development of various sensing applications, including biomedical ones, such as monitoring of the biodistribution of biomolecules. To extend sensing abilities and to find reliable measurement conditions, one needs to clearly understand all the phenomena taking place during energy transformation during photoacoustic signal formation. Therefore, the current paper is devoted to an overview of the main measurement principles used in the photoacoustic setup configurations, with a special focus on the key physical parameters. [ABSTRACT FROM AUTHOR]

Semiconductor-insulator-semiconductor heterojunction solar cells were prepared using atomic layer deposition (ALD) technique. The silicon surface was treated with oxygen and hydrogen plasma in different orders before dielectric layer deposition. A plasma-enhanced ALD process was applied to deposit dielectric Al2O3 on the plasma pretreated n-type Si(100) substrate. Aluminum doped zinc oxide (Al:ZnO or AZO) was deposited by thermal ALD and serves as transparent conductive oxide. Based on transmission electron microscopy studies the presence of thin silicon oxide (SiOx) layer was detected at the Si/Al2O3 interface. The SiOx formation depends on the initial growth behavior of Al2O3 and has significant influence on solar cell parameters. The authors demonstrate that a hydrogen plasma pretreatment and a precursor dose step repetition of a single precursor improve the initial growth behavior of Al 2O3 and avoid the SiOx generation. Furthermore, it improves the solar cell performance, which indicates a change of the Si/Al2O3 interface states. [ABSTRACT FROM AUTHOR]

Cytotoxicity of fluorescent carbon fluoroxide (CFO) nanoparticles (NPs) was studied in a label-free manner on several cancer and non-cancer cell lines. A direct cytotoxic effect of the CFO NPs was clearly observed by a suppression of cell proliferation. The real-time measurement of cell activities allowed to quantify the impact of the uptaken NPs on cell proliferation and after washout of the NPs from the cell culture medium. The results show more toxic effects of the CFO NPs on cancer than on non-cancer cell lines. The notion of NPs biocompatibility must be related to a maximum concentration value of the NPs acceptable for a given cell type. Furthermore, the cytotoxicity effects of NPs should be studied not only during their direct exposure to cells but also after their washout from the culture medium. [ABSTRACT FROM AUTHOR]

We present results on the photothermal (PT) and heat conductive properties of nanogranular silicon (Si) films synthesized by evaporation of colloidal droplets (drop-casting) of 100 ± 50 nm-sized crystalline Si nanoparticles (NP) deposited on glass substrates. Simulations of the absorbed light intensity and photo-induced temperature distribution across the Si NP films were carried out by using the Finite difference time domain (FDTD) and finite element mesh (FEM) modeling and the obtained data were compared with the local temperatures measured by micro-Raman spectroscopy and then was used for determining the heat conductivities k in the films of various thicknesses. The cubic-to-hexagonal phase transition in Si NP films caused by laser-induced heating was found to be heavily influenced by the film thickness and heat-conductive properties of glass substrate, on which the films were deposited. The k values in drop-casted Si nanogranular films were found to be in the range of lowest k of other types of nanostructurely voided Si films due to enhanced phonon scattering across inherently voided topology, weak NP-NP and NP-substrate interface bonding within nanogranular Si films. [ABSTRACT FROM AUTHOR]

Hydrogen generation rate is one of the most important parameters which must be considered for the development of engineering solutions in the field of hydrogen energy applications. In this paper, the kinetics of hydrogen generation from oxidation of hydrogenated porous silicon nanopowders in water are analyzed in detail. The splitting of the Si-H bonds of the nanopowders and water molecules during the oxidation reaction results in powerful hydrogen generation. The described technology is shown to be perfectly tunable and allows us to manage the kinetics by: (i) varying size distribution and porosity of silicon nanoparticles; (ii) chemical composition of oxidizing solutions; (iii) ambient temperature. In particular, hydrogen release below 0 °C is one of the significant advantages of such a technological way of performing hydrogen generation. [ABSTRACT FROM AUTHOR]

According to the proposed pyrolytic method, granular activated carbon (AC) Norit 830 W was functionalized by thermal treatment of AC in hydrofluorocarbon (HFC) gases, pentafluoroethane and 1,1,1,2-tetrafluoroethane, at 400-800 °C. This method does not require activation by plasma and photons. Chemical and elemental analysis showed that the pyrolytic treatment provides a loading of 2.95 mmol (5.6 wt%) of fluorine per gram of AC. Nitrogen adsorption measurements indicated that the microporous structure contracted when AC was treated with HFC at temperatures above 400 °C. Thermogravimetry, Fourier transform infrared spectroscopy (FTIR) with attenuated total reflectance (ATR), and X-ray photoelectron spectroscopy (XPS) demonstrated the evolution of oxygen-containing and fluorine-containing groups to more thermostable groups with treatment temperature. The fluorine-containing groups grafted at high temperature, above 600 °C exhibited the highest thermal stability up to 1250 °C in dry argon. From the data of XPS and solid-state 19 F nuclear magnetic resonance spectroscopy data, the grafted fluorine exists in several types of grafted F-containing groups, the HFC residues. By changing the thermal regime of fluorination, the composition of fluorine-containing groups on a carbon surface can be regulated. Isolated fluoroalkyl groups can be grafted at temperatures of 400-500 °C, while at 600 °C and above, the semi-ionic fluorine groups increase significantly. The hydrophobized surface demonstrated the ability to effectively decompose H 2 O 2 in methanol solutions., Competing Interests: There are no conflicts to declare. A. Zaderko is listed as the Fluocar® trademark owner of the US 5,479,088 and Ukraine 213,198 registration., (This journal is © The Royal Society of Chemistry.)

A novel method for the concurrent introduction of fluorine and bromine into the surface of nanoporous activated carbon (NAC) is evaluated. According to the method, the preheated NAC was treated with 1,2-dibromotetrafluoroethane at elevated temperatures (400-800 °C). Potentiometric and elemental analysis, nitrogen adsorption-desorption, scanning electron microscopy-energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy (XPS), and 19 F solid-state NMR were used to study the NAC microstructure and changes in surface chemistry. The specific modification temperature was found to have a decisive influence on the resulting halogen content of the NAC surface. About 1.5 mmol g -1 of bromine and only 0.5 mmol g -1 of fluorine are chemisorbed on the NAC surface when dual-doped at 400 °C. The fluorination efficiency increases dramatically to 1.84-2.22 mmol g -1 when the process temperature is increased to 500-700 °C. Under the same conditions, the bromination efficiency unexpectedly decreases to 0.66-1.32 mmol g -1 . Since halogen-containing groups undergo significant thermal decomposition around 800 °C, the overall halogenation efficiency decreases, accordingly. Both the volume and surface area of the micropores decrease moderately when halogen-containing groups are introduced into the carbon surface layer. Fluorine and bromine are unevenly distributed in the porous structure of the dual-doped NACs, and the outer surface is more halogen-rich than the inner surface of the micropores. XPS and 19 F solid-state NMR revealed the selective formation of CF 2 groups in the NAC surface layer independent of the temperature. In contrast, the percentage of semi-ionic fluorine in the form of CF groups directly bonded to the π-electron system of the carbon matrix increases significantly with temperature., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)