Search

Biogas produced by anaerobic digestion contains different types of contaminants, and it is preferable to eliminate those contaminants before biogas’ energetic valorization or upgrading to biomethane as they are harmful to human health and detrimental to combustion engines. This study presents the biogas cleanup system optimized by an Italian full-scale anaerobic digester treating food waste (FW) and represented by micro-oxygenation, chemical scrubber, cooling, and activated carbon sections. The cleaned biogas is upgraded to biomethane using a membrane-based upgrading unit and injected into the natural gas network for transport sector use. H2S and volatile organic compound (VOC) concentration in raw biogas was reduced from an annual average value of 1207 ppmv and 895 mg/Nm3, respectively, to below 0.1 mg/Nm3 in the final biomethane. In the summer, the H2S average content in raw biogas was 833 ppmv due to a greater presence of low-sulfur-containing vegetables in FW, while in the winter it was an average of 1581 ppmv due to a larger portion of protein-containing FW. On the other hand, raw biogas VOC content in the winter was an average of 1149 mg/Nm3, with respect to 661 mg/Nm3 in the summer, due to the greater consumption of citrus fruits containing high amount of terpene compounds. The concentration of other trace contaminants, such as HCl, NH3, and siloxanes, was lowered from 17, 36, and 0.6 mg/Nm3 in raw biogas, respectively, to below 0.1 mg/Nm3 in the final biomethane. All the considerations and evaluations underlying the technological and plant engineering choices together with the individuation of the best operating conditions are discussed.

Refuse-Derived Fuels (RDFs) are segregated forms of wastes obtained by a combined mechanical–biological processing of municipal solid wastes (MSWs). The narrower characteristics, e.g., high calorific value (18–24 MJ/kg), low moisture content (3–6%) and high volatile (77–84%) and carbon (47–56%) contents, make RDFs more suitable than MSWs for thermochemical valorization purposes. As a matter of fact, EU regulations encourage the use of RDF as a source of energy in the frameworks of sustainability and the circular economy. Pyrolysis and gasification are promising thermochemical processes for RDF treatment, since, compared to incineration, they ensure an increase in energy recovery efficiency, a reduction of pollutant emissions and the production of value-added products as chemical platforms or fuels. Despite the growing interest towards RDFs as feedstock, the literature on the thermochemical treatment of RDFs under pyrolysis and gasification conditions still appears to be limited. In this work, results on pyrolysis and gasification tests on a real RDF are reported and coupled with a detailed characterization of the gaseous, condensable and solid products. Pyrolysis tests have been performed in a tubular reactor up to three different final temperatures (550, 650 and 750 °C) while an air gasification test at 850 °C has been performed in a fluidized bed reactor using sand as the bed material. The results of the two thermochemical processes are analyzed in terms of yield, characteristics and quality of the products to highlight how the two thermochemical conversion processes can be used to accomplish waste-to-materials and waste-to-energy targets. The RDF gasification process leads to the production of a syngas with a H2/CO ratio of 0.51 and a tar concentration of 3.15 g/m3.