Search

The carapace morphology of tortoises is a crucial characteristic used for species identification, with features such as shell shape, roughness, and color patterns varying among species. Understanding this morphological diversity is valuable not only for taxonomic classification but also for more specialized clinical approaches. This study investigated the morphological differences in the shells of Leopard tortoises (Stigmochelys pardalis), African spurred tortoises (Centrochelys sulcata), and Greek tortoises (spur-thighed tortoises; Testudo graeca) raised in captivity. Using 3D scanners, the carapaces were modeled, and a 3D geometric morphometric method was employed to analyze shape variations and dimensional features, with landmarks applied automatically. Among the species studied, African spurred tortoises had the largest carapace size. Principal component analysis (PCA) identified PC1 and PC3 as critical factors in distinguishing between species based on morphological characteristics. Positive PC1 values, associated with a shorter carapace height, indicated a flatter or more compact shell shape. A higher PC3 value corresponded to a raised shape at the back of the shell, while a lower PC3 value indicated a raised shape at the front. Specifically, Leopard tortoises exhibited a higher carapace shape than the other species, while African spurred tortoises had shorter carapaces. An allometric effect was observed in the carapaces, where smaller specimens tended to be proportionately higher-domed, whereas larger shells displayed a lower height in shape. These findings highlight the significance of shape variations in tortoise shells, which emerge during adaptation and have important implications for taxonomy and clinical practice. Such differences should be carefully considered in veterinary care and species identification.

This study aimed to reveal the morphological characteristics of pure Holstein and Simmental skulls and to obtain reference values for morphometric analysis. Moreover, 54 skulls from 12- to 14-month-old male Holstein (n = 25) and Simmental (n = 29) cattle were collected from Turkey’s Southeastern Anatolia Region between 2023 and 2024. Linear measurements indicated that Holsteins had longer skulls compared to Simmentals. Holsteins exhibited significantly higher values for the greatest length of nasals and the shortest skull length. The facial breadth was wider in Holsteins and statistically distinctive between the breeds. Holsteins had a more oval orbital bony roof, while Simmentals exhibited a wider orbital structure. The orbital index was higher in Holsteins, distinguishing between the two breeds. It was observed that Simmental cattle had a wider occipital region. This difference is likely due to the larger lateral appearance of the Simmental skull, which has more body weight and provides a larger surface area for muscle attachment. These differences not only aid in breed identification but also offer insights into the functional adaptations of each breed. Future research should explore the genetic and environmental factors contributing to these morphological traits, further enriching our knowledge of cattle morphology and its implications for breeding and conservation efforts.

Guinea pigs (Cavia porcellus) are rodents that feed on grassy plants, buds and sprouts, with cheek teeth having specialised abrasive surfaces for plant grinding. In analysing the prehension and trituration ways of guinea pigs, many differences concerning mandible conformation, the positioning of cheek teeth and the morphology of the masticatory muscles compared to other rodents were found. Masticatory muscles of guinea pigs are predominant compared to the mimetic muscles which are reduced. Compared to other rodents, in guinea pigs, inside the tendon thickness of the superficial part of the masseter muscle there are two rounded cartilaginous structures such as sesamoids. The dorsal one is larger, measuring about 3–4 mm in diameter having the role of reducing pressure on the tendon when it passes over the mandible ridge. The other is ventrally placed, about 2–3 mm in size and protects the tendon of the superficial part of the masseter muscle when it passes over the ventral tubercle of the mandible.

In terrestrial species, body propulsion is mostly performed via the pelvic limbs. In semiaquatic species, both pairs of limbs are used in swimming and diving, whereas in arboreal species, the pelvic limbs are used to maintain body stability. Thus, in squirrels, the synsarcosis muscles participate in body propulsion during climbing, as they have well-developed muscular bellies. Among these, the pectoral transverse muscle, which originates along the entire sternum and is inserted on the humeral crest, stands out for its width. The cervical parts of the trapezius and rhomboideus muscles are reduced and their thoracic parts more developed. As a result, muscles such as the occipitoscapularis or atlantoscapularis coordinate forelimb protraction and neck displacement. The serratus ventralis muscle is very well developed and clearly divided into cranial (cervical) and caudal (thoracic) parts; it produces a strong adduction of the thoracic limbs when the parts contract, and when they relax, a large abduction of the forelimbs is produced, enlarging the body size during jumping.

Studies on the structure of the distal phalanx help explain the development of laminitis. Additionally, examining the structure of the distal phalanx from a taxonomic perspective also contributes to veterinary anatomy. In this study, we examined shape variation in the medial and lateral distal phalanx of both fore- and hindlimbs using the geometric morphometry method. We investigated whether the shape of the distal phalanx differed between phalanx positions and how much of the shape variation in this bone depends on size. For this purpose, distal phalanges from 20 Holstein cattle were used, and the bones were digitized in 3D. A draft containing 176 semi-landmarks was prepared for shape analysis, and this draft was applied to all samples using automated landmarking through point cloud alignment and correspondence analysis. A principal component analysis was performed to obtain general patterns of morphological variation. The centroid size (CS) was employed as an approximation of size. Although distal phalanx groups generally showed close variations, PC1 statistically separated the hindlimb lateral distal phalanx (HL) and the forelimb medial distal phalanx (FM) from each other in shape. While PC2 separated HL from other distal phalanx groups, PC3 separated fore- and hindlimb groups. The shape (Procrustes distance) of the hindlimb medial distal phalanx (HM) is markedly less variable than the other three phalanges. The smallest distal phalanx in size was HL. For both forelimb and hindlimb, the medial distal phalanges were larger than the lateral ones. Size (CS) was found to have an effect on PC1 and PC3. In this study, a reference model of the same breeds for distal phalanx was created. These results can provide useful information, especially in terms of veterinary anatomy, zooarchaeology, and paleontology.

The scapula in quadrupedal mammals is a flat bone that connects the thoracic limb with the trunk above the shoulder joint. For this purpose, scapulae of 34 dogs and 23 cats were modeled using computer tomography. 9 Landmarks and 50 semilandmarks were used. The cat and dog samples differ in scapula shape, as do male and female cats. Centroid size has no apparent covariance with shape, and we did not find any difference between the two sexes in dogs. The scapula of cats was wider. The scapula of dogs was narrower and longer. Margo cranialis was more oval in cats. Angulus cranialis border was not clear in cats. Angulus caudalis was sharper in dogs. Spina scapulae was closer to caudal in cats. In cats, the fossa supraspinata was wider than the fossa infraspinata. Also, the collum scapulae was narrower in cats. The scapula of male cats was wider than that of female cats. In shape, the fossa supraspinata was wider in male cats. In male cats, the spina scapulae were more caudal. Angulus caudalis was wider in female cats. The most significant gender differences in dogs were in tuberculum supraglenoidale and margo caudalis. Male dogs had larger tuberculum supraglenoidale in shape. Margo caudalis was more caudal in male dogs. Geometric morphometrics was found to be effective in distinguishing the scapula of cats and dogs. In addition, this method can be useful in sex estimation.

Biomaterials are currently a unique class of materials that are essential to improving the standard of human life and extending it. In the assent of the appearance of biomaterials that contain non-toxic elements, in this study, we examine a system of Ti25Mo7Zr15TaxSi (x = 0, 0.5, 0.75, 1 wt.%) for future medical applications. The alloys were developed in a vacuum electric arc furnace and then studied from a structural, mechanical and in vivo assessment (on rabbits) perspective. The effect of the silicon addition was clearly seen in both the structural and the mechanical characteristics, standing out as beta alloys with a dendritic structure and lowering the mechanical properties as a result of the silicon addition. In experimental rabbits, the proliferation of mesenchymal stem cells was observed in the periosteum and peri-implant area, differentiating into osteoblasts and then into osteocytes. Osteoclasts were discovered within the cartilaginous islands that provide structural support to newly formed bone, playing a primary role in bone remodeling. The newly formed spongy tissue adhered to the fibrous capsule that surrounds the alloy, ensuring good osseointegration of metallic implants. The overexpression of Osteopontin, Metalloproteinase-2 (also known as gelatinase A), and Metallopeptidase-9 (also known as gelatinase B) underscores the processes of osteogenesis, bone mineralization, and normal bone remodeling.

Metals that come into contact with the body can cause reactions in the body, so biomaterials must be tested to avoid side effects. Mo, Zr, and Ta are non-toxic elements; alloyed with titanium, they have very good biocompatibility properties and mechanical properties. The paper aims to study an original Ti20Mo7ZrxTa system (5, 10, 15 wt %) from a mechanical and in vitro biocompatibility point of view. Alloys were examined by optical microstructure, tensile strength, fractographic analysis, and in vitro assay. The obtained results indicate very good mechanical and biological properties, recommending them for future orthopedic medical applications.

Background: The covert or indirect type of aggression has a risk of converting in violent acts and, considering that, it is very important to identify it in order to apply effective preventive measures. In cases of psychotic patients, the risk of becoming violent is harder to predict, as even neuter stimuli may be perceived as threat and trigger aggression. Treating all the psychiatric patients as potential aggressive subjects is not the best preventive measure as only a few of them are aggressive and this measure may further enhance the stigma on mentally ill patients. There is a current need for better understanding of covert aggression and to find objective measures, such as biological markers, that could be indicative of potential violent behavior. In this work, we try to investigate the role of cortisol and oxytocin as potential biomarkers of aggression in patients with psychosis. Material and Methods: We analyzed the level of peripheral oxytocin (pg/mL) and cortisol level (ng/mL) in 28 psychotic patients (they were not on psychotropic treatment at the moment of admission and those with substance abuse or personality disorder were excluded from the study) and correlated it with the intensity of aggression reported by the patient (overt and covert type) using the Overt Covert Aggression Inventory and the level of observed aggression of the patient in the past 7 days (rated by the health care provider) using the Modified Overt Aggression Scale. Results: We found that psychotic patients with a higher level of covert aggression had a lower level of cortisol (61.05 ± 8.04 ng/mL vs. 216.33 ± 12.6.9 ng/mL, p ˂ 0.01) and a higher level of oxytocin (102.87 ± 39.26 vs. 70.01 ± 25.07, p = 0.01) when compared with patients with a lower level of covert aggression. Furthermore, we observed significant negative correlation between cortisol and covert aggression (r = −0.676, p < 0.001) and between oxytocin and covert type of aggression (r = 0.382, p = 0.04). Moreover, we found that a lower level of cortisol together with a higher level of oxytocin are significant predictors of a style of internalized manifestation of aggression, with the predictive model explaining 55% of the variant of the internalized manifestation of aggression (F (2.25) = 17.6, p < 0.001, β = 0.35, R2 = 55.2). We did not find significant correlations between cortisol and overt aggression, and neither between oxytocin and overt aggression. Positive correlations were also found between the overt type of self-reported aggression and overt aggression reported by the rater (r = 0.459, p = 0.01). Conclusions: The importance of a predictive model in understanding covert aggression is imperative and the results of our study show that oxytocin and cortisol warrant to be further investigated in establishing a definitive predictive model for covert aggression.