Search

Point-of-use ceramic filters are one of the strategies to address problems associated with waterborne diseases to remove harmful microorganisms in water sources prior to its consumption. In this study, development of adsorption-based ceramic depth filters composed of alumina platelets was achieved using spray granulation (calcined at 800 °C). Their virus retention performance was assessed using cartridges containing granular material (4 g) with two virus surrogates: MS2 and fr bacteriophages. Both materials showed complete removal, with a 7 log10 reduction value (LRV) of MS2 up to 1 L. MgAl2O4-modified Al2O3 granules possessed a higher MS2 retention capacity, contrary to the shortcomings of retention limits in pure Al2O3 granules. No significant decline in the retention of fr occurred during filtration tests up to 2 L. The phase composition and morphology of the materials were preserved during filtration, with no magnesium or aluminum leakage during filtration, as confirmed by X-ray diffractograms, electron micrographs, and inductively coupled plasma-optical emission spectrometry. The proposed MgAl2O4-modified Al2O3 granular ceramic filter materials offer high virus retention, achieving the criterion for virus filtration as required by the World Health Organization (LRV ≥ 4). Owing to their high thermal and chemical stability, the developed materials are thus suitable for thermal and chemical-free regeneration treatments.

This study investigated the performances of gravity-driven membrane (GDM) reactors integrated with granule activated carbon (GAC) biofilm process for wastewater treatment under different intermittent aeration cycles (intensity and frequency). The results showed the removal efficiencies of dissolved organic carbon, total nitrogen, ammoniawere significantly improved under intermittent aeration conditions (~86–87%, ~29–37%, and ~83–99%, respectively) compared to non-aeration condition (~72% and ~18%, and ~17%, respectively). In addition, it was found that the intermittent aeration significantly reduced the cake layer resistance and therefore improved ~130–300% the permeate flux compared to control without aeration. Microbial community analysis indicated that prokaryotic and eukaryotic compositions in the cake layer biofilm were significantly influenced by aeration condition. Lastly, energy consumption analysis revealed that GAC + GDM with shorter aeration period and low aeration intensity could be promising as a decentralizedwastewater treatment process in terms of water quality and operating energy. Economic Development Board (EDB) Accepted version The Economic Development Board (EDB) of Singapore is acknowledged for funding the SingaporeMembrane Technology Centre (SMTC), Nanyang Technological University.

A European round robin test according to ISO 5725-2 was conceptually prepared, realised, and evaluated. The aim was to determine the inter-laboratory variability of the overall process for the ecotoxicological characterization of construction products in eluates and bioassays. To this end, two construction products BAM-G1 (granulate) and HSR-2 (roof sealing sheet), both made of EPDM polymers (rubber), were selected. The granular construction product was eluted in a one stage batch test, the planar product in the Dynamic Surface Leaching test (DSLT). A total of 17 laboratories from 5 countries participated in the round robin test: Germany (12), Austria (2), Belgium (1), Czech Republic (1) and France (1). A test battery of four standardised ecotoxicity tests with algae, daphnia, luminescent bacteria and zebrafish eggs was used. As toxicity measures, EC50 and LID values were calculated. All tests, except the fish egg test, were basically able to demonstrate toxic effects and the level of toxicity. The reproducibility of test results depended on the test specimens and the test organisms. Generally, the variability of the EC50 or LID values increased with the overall level of toxicity. For the very toxic BAM-G1 eluate a relative high variability of CV = 73%-110% was observed for EC50 in all biotests, while for the less toxic HSR-2 eluate the reproducibility of EC50 varied with sensitivity: it was very good (CV = 9.3%) for the daphnia test with the lowest sensitivity, followed by the algae test (CV = 36.4%). The luminescent bacteria test, being the most sensitive bioassay for HSR-2 Eluate, showed the highest variability (CV = 74.8%). When considering the complex overall process the reproducibility of bioassays with eluates from construction products was acceptable.

The European COoperation in Science and Technology (COST) Action ES1205 on the transfer of Engineered Nano materials from wastewater Treatment and stormwatEr to Rivers (ENTER) aims to create and to maintain a trans European network among scientists. This perspective article delivers a brief overview on the status quo at the beginning of the project by addressing the following aspects on engineered nano materials (ENMs) in the urban systems: (1) ENMs that need to be considered on a European level; (2) uncertainties on production-volume estimations; (3) fate of selected ENMs during waste water transport and treatment; (4) analytical strategies for ENM analysis; (5) ecotoxicity of ENMs, and (6) future needs. These six step stones deliver the derivation of the position of the ES1205 network at the beginning of the projects runtime, by defining six fundamental aspects that should be considered in future discussions on risk evaluation of ENMs in urban water systems.

Organic architectural coatings require the use of biocides to prevent microbial defacement of building facades. The biocides are meant to slowly release to the surface, but they can still potentially enter the environment via runoff during rain events. Accurate source emissions estimates are necessary for risk assessments, and knowledge of the release mechanism can aid both regulators and producers alike. In this study, several biocides and several market and reference coating systems were subjected to regular irrigation and drying cycles with varying temperature conditions. The results were compared to other studies and models from the controlled release literature, demonstrating diffusion controlled release with dependence on the experimental conditions. The role of wetting and drying cycles in accelerating release is highlighted.

Building facades can be equipped with biocides to prevent formation of algal, fungal and bacterial films. Thus run-off waters may contain these highly active compounds. In this study, the removal of several groups of biocides from contaminated waters by means of an activated soil filter was studied. A technical scale activated vertical soil filter (biofilter) with different layers (peat, sand and gravel), was planted with reed (Phragmites australis) and used to study the removal rates and fate of hydrophilic to moderate hydrophobic (log Kow 1.8–4.4) biocides and biocide metabolites such as: Terbutryn, Cybutryn (Irgarol 1051), Descyclopropyl–Cybutryn (Cybutryn and Terbutryn metabolite), Isoproturon, Diuron, and its metabolite Diuron-desmonomethyl, Benzo-isothiazolinone, n-Octyl-isothiazolinone, Dichloro-noctylisothiazolinone and Iodocarbamate (Iodocarb). Three experiments were performed: the first one (36 d) under low flow conditions (61 L m2 d1) reached removal rates between 82% and 100%. The second one was performed to study high flow conditions: During this experiment, water was added as a pulse to the filter system with a hydraulic load of 255 L m2 within 5 min (retention time this experiment the removal rates of the compounds decreased drastically. For five compounds (Cybutryn, Descyclopropyl–Cybutryn, Diuron, Isoproturon, and Iodocarb) the removal dropped temporarily below 60%, while it was always above 70% for the others (Terbutryn, Benzo-isothiazolinone, n-Octyl-isothiazolinone, Dichloro-n-octylisothiazolinone). However, this removal is a considerable improvement compared to direct discharge into surface waters or infiltration into soil without appropriate removal. In the last experiment the removal efficiencies of the different layers were studied. Though the peat layer was responsible for most of the removal, the sand and gravel layers also contributed significantly for some compounds. All compounds are rather removed by degradation than by sorption.

The benefit of using software development methods should be a gain in regularity and clarity in software projects. Classical approaches are designed for medium to big team size with a distinctly separated and static role description combined with a top down development process. Agile methods mainly focus on small teams with low budget project size, and a fixed deadline with a bottom up development process. In this paper we present a combined approach for projects with multiple small teams growing together to a medium size project with a hard deadline and low budget – called Agile Methodology for Intelligent Agents Componentware (aMIAC). The approach will be introduced and applied within a case study.

Environmental sciences Europe : ESEU 28, 20 (2016). doi:10.1186/s12302-016-0088-3, Published by Springer, Berlin ; Heidelberg