Search

We herein describe a simple and efficient one-pot synthesis approach to prepare crystalline polycarbonate–polyester diblock copolymers by copolymerizing tetrachlorophthalic anhydride, CO2, and ethylene oxide using a metal-free catalyst. The block copolymers possess a melting point as high as 169 °C and two distinct glass transition temperatures. It is also possible to control the length and composition of the copolymers, thereby customizing their crystallinity and physical performance. [ABSTRACT FROM AUTHOR]

The cathode affects the capacity, working voltage, and cost of lithium-ion batteries. Although the binder is a small part of the cathode material, it is particularly important to the performance of the batteries. Therefore, the design and development of polymer binders with different structures and characteristics is an important topic. In this paper, an NCM811 cathode (PPC-NCM) was prepared by a solvent-free method using poly (propylene carbonate) (PPC) as the binder, with an active substance loading of 10 mg/cm2. To explore the effect of the PPC binder on the electrochemical performance of the NCM811 cathode, the discharge capacity was 112.2 mAh/g with a 76.1% capacity retention after cycling more than 200 cycles at 1 C, which has a significantly better cycling performance than that of a PVDF-NCM/Li battery. The PPC/NCM/graphite full cells were also assembled to demonstrate the practical application potential of this work. It was shown that PPC as a binder can improve the cycling stability of NCM811/Li and NCM811/graphite full cells. The PPC binder used in the NCM811 cathode not only makes it extremely easy to prepare dry electrodes, but also makes it very simple to recover the electrode material by heating in the case of battery failure. This paper provides a new idea for the industrialization and development of a novel binder. [ABSTRACT FROM AUTHOR]

Solid-state lithium batteries exhibit high-energy density and exceptional safety performance, thereby enabling an extended driving range for electric vehicles in the future. Solid-state electrolytes (SSEs) are the key materials in solid-state batteries that guarantee the safety performance of the battery. This review assesses the research progress on solid-state electrolytes, including polymers, inorganic compounds (oxides, sulfides, halides), and organic–inorganic composites, the challenges related to solid-state batteries in terms of their interfaces, and the status of industrialization research on solid-state electrolytes. For each kind of solid-state electrolytes, details on the preparation, properties, composition, ionic conductivity, ionic migration mechanism, and structure–activity relationship, are collected. For the challenges faced by solid-state batteries, the high interfacial resistance, the side reactions between solid-state electrolytes and electrodes, and interface instability, are mainly discussed. The current industrialization research status of various solid electrolytes is analyzed in regard to relevant enterprises from different countries. Finally, the potential development directions and prospects of high-energy density solid-state batteries are discussed. This review provides a comprehensive reference for SSE researchers and paves the way for innovative advancements in regard to solid-state lithium batteries. [ABSTRACT FROM AUTHOR]

A CO2‐based thermoplastic elastomer, poly(propylene carbonate)‐multiblock‐polyamide6 (PPC‐mb‐PA6) copolymer, was constructed through coupling amorphous/soft PPC blocks with crystalline/hard PA6 blocks. The PPC‐mb‐PA6 copolymers with different block length pairs were designed and synthesized, and then fully characterized by structural, thermal, and mechanical analysis. The proton nuclear magnetic resonance (1H‐NMR), diffusion ordered spectroscopy (DOSY), heteronuclear multiple‐bond correlation (HMBC) and gel permeation chromatography (GPC) results confirm that the multiblock sequence structure of PPC‐mb‐PA6. The differential scanning calorimetry (DSC) tests show that all PPC‐mb‐PA6s possess melting points around 179–206°C. The thermal and mechanical analysis indicates improved service temperatures (T5% up to 270°C) and tensile strength ranging from 15.8 to 39.6 MPa with higher PA6 content. The dynamic mechanical analysis demonstrates excellent shape memory effect of PPC‐mb‐PA6 with thermal stimuli responsiveness derived from the micro phase separation between soft PPC and hard PA6 domains. And the characteristic strain fixity parameter (Rf) and deformation recovery rate (Rr) are 98% and 100%, respectively, which are comparable with other excellent shape memory polymers. [ABSTRACT FROM AUTHOR]

The polycondensation of carbon dioxide and diols under atmospheric pressure has significant appeal, thus making the study of catalysts in this process very important. Here, a series of CeO2-X catalysts (X = 9/11/13) with surface modification by basic sites was synthesized via simple impregnation in KOH solution. The structure and morphology of the CeO2-X catalysts remained unchanged after KOH treatment. However, the specific surface area of modified catalysts showed a slight decrease compared with the unmodified samples due to the notable enhancement of basic sites on the surface, resulting in improvement of CO2 adsorption capacity. Furthermore, the catalytic performance of the resultant CeO2-X catalysts was evaluated by solvent-free polymerization of 1,6-hexanediol (HDO) and CO2 at atmospheric pressure (0.1 MPa) using a well-designed reaction apparatus. As a result, the modified catalysts exhibited better performance for CO2 activation due to the existence of abundant basic sites on the surfaces, while CeO2-11 possessed the most favorable catalytic activity and displayed an enhancement of approximately 50% in production compared with that of unmodified CeO2. [ABSTRACT FROM AUTHOR]

High-temperature proton exchange membrane fuel cells (HT-PEMFCs) have become one of the important development directions of PEMFCs because of their outstanding features, including fast reaction kinetics, high tolerance against impurities in fuel, and easy heat and water management. The proton exchange membrane (PEM), as the core component of HT-PEMFCs, plays the most critical role in the performance of fuel cells. Phosphoric acid (PA)-doped membranes have showed satisfied proton conductivity at high-temperature and anhydrous conditions, and significant advancements have been achieved in the design and development of HT-PEMFCs based on PA-doped membranes. However, the persistent issue of HT-PEMFCs caused by PA leaching remains a challenge that cannot be ignored. This paper provides a concise overview of the proton conduction mechanism in HT-PEMs and the underlying causes of PA leaching in HT-PEMFCs and highlights the strategies aimed at mitigating PA leaching, such as designing crosslinked structures, incorporation of hygroscopic nanoparticles, improving the alkalinity of polymers, covalently linking acidic groups, preparation of multilayer membranes, constructing microporous structures, and formation of micro-phase separation. This review will offer a guidance for further research and development of HT-PEMFCs with high performance and longevity. [ABSTRACT FROM AUTHOR]

A series of CO2-based thermoplastic polyurethanes (TPUs) were prepared using CO2-based poly(polycarbonate) diol (PPCDL), 4,4′-methylenebis (cyclohexyl isocyanate) (HMDI), and polypropylene glycol (PPG and 1,4-butanediol (BDO) as the raw materials. The mechanical, thermal, optical, and barrier properties shape memory behaviors, while biocompatibility and degradation behaviors of the CO2-based TPUs are also systematically investigated. All the synthesized TPUs are highly transparent amorphous polymers, with one glass transition temperature at ~15–45 °C varying with hard segment content and soft segment composition. When PPG is incorporated into the soft segments, the resultant TPUs exhibit excellent self-healing and shape memory performances with the average shape fixity ratio and shape recovery ratio as high as 98.9% and 88.3%, respectively. Furthermore, the CO2-based TPUs also show superior water vapor permeability resistance, good biocompatibility, and good biodegradation properties, demonstrating their pretty competitive potential in the polyurethane industry applications. [ABSTRACT FROM AUTHOR]

Acid‐functionalized polymers enhance the performance of phosphoric‐acid‐doped polybenzimidazoles (PA/PBIs); however, studies on examining the mechanisms driving these enhancements are scarce. Furthermore, the nanophase morphology of PA‐dependent proton‐exchange membranes has been rarely explored, despite its direct role in the distribution of PA and protonic conduction. In this study, theoretical and experimental analyses to evaluate the microphase separation, particularly the formation and in situ transformation of a two‐phase interface, in a defect‐free polyphenylene ionomer (SPP‐QP) with excellent integrity are performed. SPP‐QP serves as a fortifying agent with an enhanced microphase‐separation ability within PA/PBI‐based membranes. Specifically, the distinct swelling behavior of PA results in the formation of PA‐rich and PA‐poor regions. Thus, the formation of a durable interface that is impervious to PA degradation between SPP‐QP and PBI is critical for facilitating microphase separation. A single cell composed of the composite membrane offers a peak power density of 719 mW cm−2 at 160 °C. Moreover, the durability of a single cell is much longer than 150 h. The results obtained in this study provide insights into the micromorphology and membrane properties observed in the presence of PA. [ABSTRACT FROM AUTHOR]

Degradable and high-barrier plastic packaging materials draw more attention with the development of a social economy and the demands of environmental protection. In this study, poly(propylene carbonate phthalate) (PPC-P) and poly(butylene adipate-co-terephthalate) (PBAT) blends with different ratios were designed and prepared, marked as PPC-P/PBAT. Chain extenders were introduced into the blends, and the mechanical properties, thermal properties, and barrier properties of the composites were studied. The 75PPC-P/PBAT with 2% extenders represent the best performance. The addition of the chain extender has significantly improved the thermal stability and tensile elongation of PPC-P/PBAT. On this basis, the PPC-P/PBAT composite film was coated with PVA and borax using the dipping and pulling method. The oxygen barrier properties have been further improved for the composite film with a coating layer. Considering the characteristics of biodegradability and a high-barrier property, the 75PPC-P/PBAT/2MDI@Gly blend coated with 2 wt% PVA and 3 wt% borax exhibits potential as a superior food/pharmaceutical plastic packaging material with excellent tensile and barrier properties. [ABSTRACT FROM AUTHOR]

To address the challenges posed by the narrow oxidation decomposition potential window and the characteristic of low ionic conductivity at room temperature of solid polymer electrolytes (SPEs), carbon dioxide (CO2), epichlorohydrin (PO), caprolactone (CL), and phthalic anhydride (PA) were employed in synthesizing di-block copolymer PCL-b-PPC and PCL-b-PPCP. The carbonate and ester bonds in PPC and PCL provide high electrochemical stability, while the polyether segments in PPC contribute to the high ion conductivity. To further improve the ion conductivity, we added succinonitrile as a plasticizer to the copolymer and used the copolymer to assemble lithium metal batteries (LMBs) with LiFePO4 as the cathode. The LiFePO4/SPE/Li battery assembled with PCL-b-PPC electrolyte exhibited an initial discharge-specific capacity of 155.5 mAh·g−1 at 0.5 C and 60 °C. After 270 cycles, the discharge-specific capacity was 140.8 mAh·g−1, with a capacity retention of 90.5% and an average coulombic efficiency of 99%, exhibiting excellent electrochemical performance. The study establishes the design strategies of di-block polymer electrolytes and provides a new strategy for the application of LMBs. [ABSTRACT FROM AUTHOR]

Practical high‐voltage lithium metal batteries hold promise for high energy density applications, but face stability challenges in electrolytes for both 4 V‐class cathodes and lithium anode. To address this, we delve into the positive impacts of two crucial moieties in electrolyte chemistry: fluorine atom (‐F) and cyano group (‐CN) on the electrochemical performance of polyether electrolytes and lithium metal batteries. Cyano‐bearing polyether electrolytes possess strong solvation, accelerating Li+ desolvation with minimal SEI impact. Fluorinated polyether electrolytes possess weak solvation, and stabilize the lithium anode via preferential decomposition of F‐segment, exhibiting nearly 6000‐h stable cycling of lithium symmetric cell. Furthermore, the electron‐withdrawing properties of ‐F and ‐CN groups significantly bolster the high‐voltage tolerance of copolymer electrolyte, extending its operational range up to 5 V. This advancement enables the development of 4 V‐class lithium metal batteries compatible with various cathodes, including 4.45 V LiCoO2, 4.5 V LiNi0.8Co0.1Mn0.1O2, and 4.2 V LiNi0.5Co0.2Mn0.3O2. These findings provide insights into design principles centered around polymer components for high‐performance polymer electrolytes. [ABSTRACT FROM AUTHOR]

Polymeric binders account for only a small part of the electrodes in lithium‐ion batteries, but contribute an important role of adhesion and cohesion in the electrodes during charge/discharge processes to maintain the integrity of the electrode structure. Therefore, polymeric binders have become one of the key materials to improve the charge/discharge properties of lithium‐ion batteries. Qualified polymer binders should not only require good bond strength, mechanical properties, conductivity, chemical functionality and processing performance, but also be environmentally friendly and low cost. The existing commercial polymeric binders cannot meet all the above requirements at the same time. This is a hot research area that researchers are keen to focus on, and it is hoped that through structural design, the matching of functional groups can meet the requirements of high‐capacity lithium‐ion batteries with long cycle life. Focusing on the structural design of polymer binders, the mechanism of interaction with electrode materials, and the functional properties of polymer binders, this review summarizes the polymer binders used in the cathode and anode in recent years. It could expect that this review can inspire a deep consideration on these critical issues, paving new pathways to improve comprehensive performance of polymer binders. [ABSTRACT FROM AUTHOR]

Poly(propylene carbonate-co-phthalate) (PPC-P) is an amorphous copolymer of aliphatic polycarbonate and aromatic polyester; it possesses good biodegradability, superior mechanical performances, high thermal properties, and excellent affinity with CO2. Hence, we fabricate PPC-P foams in an autoclave by using subcritical CO2 as a physical blowing agent. Both saturation pressure and foaming temperature affect the foaming behaviors of PPC-P, including CO2 adsorption and desorption performance, foaming ratio, cell size, porosity, cell density, and nucleation density, which are investigated in this research. Moreover, the low-cost PPC-P/nano-CaCO3 and PPC-P/starch composites are prepared and foamed using the same procedure. The obtained PPC-P-based foams show ultra-high expansion ratio and refined microcellular structures simultaneously. Besides, nano-CaCO3 can effectively improve PPC-P's rheological properties and foamability. In addition, the introduction of starch into PPC-P can lead to a large number of open cells. Beyond all doubt, this work can certainly provide both a kind of new biodegradable PPC-P-based foam materials and an economic methodology to make biodegradable plastic foams. These foams are potentially applicable in the packaging, transportation, and food industry. [ABSTRACT FROM AUTHOR]