Search

Colloidal platinum nanoparticles (Pt NPs) possess a myriad of technologically relevant applications. A potentially sustainable route to synthesize Pt NPs is via polyol reduction in ionic liquid (IL) solvents; however, the development of this synthetic method is limited by the fact that reaction kinetics have not been investigated. In-line analysis in a flow reactor is an appealing approach to obtain such kinetic data; unfortunately, the optical featurelessness of Pt NPs in the visible spectrum complicates the direct analysis of flow chemistry products via ultraviolet-visible (UV-vis) spectrophotometry. Here, we report a machine learning (ML)-based approach to analyze in-line UV-vis spectrophotometric data to determine Pt NP product concentrations. Using a benchtop flow reactor with ML-interpreted in-line analysis, we were able to investigate NP yield as a function of residence time for two IL solvents: 1-butyl-1-methylpyrrolidinium triflate (BMPYRR-OTf) and 1-butyl-2-methylpyridinium triflate (BMPY-OTf). While these solvents are structurally similar, the polyol reduction shows radically different yields of Pt NPs depending on which solvent is used. The approach presented here will help develop an understanding of how the subtle differences in the molecular structures of these solvents lead to distinct reaction behavior. The accuracy of the ML prediction was validated by particle size analysis and the error was found to be as low as 4%. This approach is generalizable and has the potential to provide information on various reaction outcomes stemming from solvent effects, for example, differential yields, orders of reaction, rate coefficients, NP sizes, etc.

The hydrogenation of CO 2 holds promise for transforming the production of renewable fuels and chemicals. However, the challenge lies in developing robust and selective catalysts for this process. Transition metal oxide catalysts, particularly cobalt oxide, have shown potential for CO 2 hydrogenation, with performance heavily reliant on crystal phase and morphology. Achieving precise control over these catalyst attributes through colloidal nanoparticle synthesis could pave the way for catalyst and process advancement. Yet, navigating the complexities of colloidal nanoparticle syntheses, governed by numerous input variables, poses a significant challenge in systematically controlling resultant catalyst features. We present a multivariate Bayesian optimization, coupled with a data-driven classifier, to map the synthetic design space for colloidal CoO nanoparticles and simultaneously optimize them for multiple catalytically relevant features within a target crystalline phase. The optimized experimental conditions yielded small, phase-pure rock salt CoO nanoparticles of uniform size and shape. These optimized nanoparticles were then supported on SiO 2 and assessed for thermocatalytic CO 2 hydrogenation against larger, polydisperse CoO nanoparticles on SiO 2 and a conventionally prepared catalyst. The optimized CoO/SiO 2 catalyst consistently exhibited higher activity and CH 4 selectivity (ca. 98%) across various pretreatment reduction temperatures as compared to the other catalysts. This remarkable performance was attributed to particle stability and consistent H* surface coverage, even after undergoing the highest temperature reduction, achieving a more stable catalytic species that resists sintering and carbon occlusion.

Lipid nanoparticles (LNPs) are drug carriers for protecting nucleic acids for cellular delivery. The first mRNA vaccines authorized by the United States Food and Drug Administration are the mRNA-1273 (Moderna) and BNT162b (BioNTech/Pfizer) vaccines against coronavirus disease 2019 (COVID-19). We designed a 3D printed Omnidirectional Sheath-flow Enabled Microfluidics (OSEM) device for producing mRNA-loaded LNPs that closely resemble the Moderna vaccine: we used the same lipid formulations to encapsulate mRNA encoding SARS-CoV-2 spike protein. The OSEM device is made of durable methacrylate-based materials that can support flow rates in the mL min -1 range and was fabricated by stereolithography (SLA), incorporating readily adaptable interfaces using commercial fluidic connectors. Two key features of the OSEM device are: 1) a 4-way hydrodynamic flow focusing region and 2) a staggered herringbone mixer (SHM). Superior to conventional planar fluid junctions, the 4-way sheath flow channel generates an evenly focused, circular center flow that facilitates the formation of LNPs with low polydispersity. Downstream, fluid mixing in the SHM is intensified by incorporating a zig-zag fluidic pathway to deliver high mRNA encapsulation efficiency. We characterized the mRNA-loaded LNPs produced in the OSEM device and showed that the enhanced 3D microfluidic structures enable a 5-fold higher throughput production rate (60 mL min -1 ) of LNPs compared to commercial multi-thousand-dollar micromixers. The device produced LNPs of diameter less than 90 nm, with low polydispersity (2-8%) and high mRNA encapsulation efficiency (>90%). The 3D-printed device provides a cost-effective and easily prepared solution for high-throughput LNP production.

Recycling ionic liquid (IL) solvents can reduce the lifecycle cost of these expensive solvents. Liquid-liquid extraction is the most straightforward approach to purify IL solvents and is typically performed with an immiscible washing agent (e.g., water). Herein, we describe a recycling route for water-miscible ILs in which direct recycling is usually challenging. We use hydrophobic ILs as accommodating agents to draw the water-miscible IL from the aqueous washing stream. A biphasic slug flow of the mixed ILs and water is then separated by using a membrane. The water-miscible IL can then be drawn out from the mixed IL phase with acidified water and dried under vacuum. Both the water-miscible IL and the accommodating agent are then recycled. Here, we demonstrated a proof-of-concept of this process by recycling 1-butyl-3-methylimidazolium trifluoromethanesulfonate (BMIM-OTf) in the presence of the accommodating agent 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BMIM-NTf 2 ) and acidified water. We then demonstrated the capacity to recycle 1-butyl-1-methylpyrrolidinium triflate (BMPYRR-OTf) from a realistic synthetic application: Pt nanoparticle synthesis in the water-miscible IL., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

Dry eye disease (DED) is a chronic condition characterized by ocular dryness and inflammation. The tear film lipid layer (TFLL) is the outermost layer composed of lipids and proteins that protect the ocular surface. However, environmental contaminants can disrupt its structure, potentially leading to DED. Although the importance of tear proteins in the TFLL functionality has been clinically recognized, the molecular mechanisms underlying TFLL-protein interactions remain unclear. In this study, we investigated tear protein-lipid interactions and analyzed their role in the TFLL functionality. The results show that lysozyme (LYZ) increases the stability of the TFLL by reducing its surface tension and increasing its surface pressure, resulting in increased TFLL evaporation and bacterial invasion resistance, with improved wettability and lubrication performance. These findings highlight the critical role of LYZ in maintaining ocular health and provide potential avenues for investigating novel approaches to DED treatment and patient well-being.

Curvature-mediated lipid-protein interactions are important determinants of numerous vital cellular reactions and mechanisms. Biomimetic lipid bilayer membranes, such as giant unilamellar vesicles (GUVs), coupled with quantum dot (QD) fluorescent probes, provide an avenue to elucidate the mechanisms and geometry of induced protein aggregation. However, essentially all QDs used in QD-lipid membrane studies encountered in the literature are of the cadmium selenide (CdSe) or CdSe core/ZnS shell type, which are quasispherically shaped. We report here the membrane curvature partitioning of cube-shaped CsPbBr 3 QDs embedded within deformed GUV lipid bilayers versus that of a conventional small fluorophore (ATTO-488) and quasispherical CdSe core/ZnS shell QDs. In alignment with basic packing theory regarding cubes packed in curved confined spaces, the local relative concentration of CsPbBr 3 is highest in areas of lowest relative curvature in the plane of observation; this partitioning behavior is significantly different from that of ATTO-488 ( p = 0.0051) and CdSe ( p = 1.10 × 10 -11 ). In addition, when presented with only one principal radius of curvature in the observation plane, no significant difference ( p = 0.172) was observed in the bilayer distribution of CsPbBr 3 versus that of ATTO-488, suggesting that both QD and lipid membrane geometry greatly impact the curvature preferences of the QDs. These results highlight a fully-synthetic analog to curvature-induced protein aggregation, and lay a framework for the structural and biophysical analysis of complexes between lipid membranes and the shape of intercalating particles.

Lipid oxidation has significant effects on lipid bilayer properties; these effects can be expected to extend to interactions between the lipid bilayer and integral membrane proteins. Given that G protein-coupled receptor (GPCR) activity is known to depend on the properties of the surrounding lipid bilayer, these proteins represent an intriguing class of molecules in which the impact of lipid oxidation on protein behavior is studied. Here, we study the effects of lipid oxidation on the human serotonin 1A receptor (5-HT 1A R). Giant unilamellar vesicles (GUVs) containing integral 5-HT 1A R were fabricated by the hydrogel swelling method; these GUVs contained polyunsaturated 1-palmitoyl-2-linoleoyl- sn -glycero-3-phosphocholine (PLinPC) and its oxidation product 1-palmitoyl-2-(9'-oxo-nonanoyl)- sn -glycero-3-phosphocholine (PoxnoPC) at various ratios. 5-HT 1A R-integrated GUVs were also fabricated from lipid mixtures that had been oxidized by extended exposure to the atmosphere. Both types of vesicles were used to evaluate 5-HT 1A R activity using an assay to quantify GDP-GTP exchange by the coupled G protein α subunit. Results indicated that 5-HT 1A R activity increases significantly in bilayers containing oxidized lipids. This work is an important step in understanding how hyperbaric oxidation can change plasma membrane properties and lead to physiological dysfunction.

3D printed microfluidics offer several advantages over conventional planar microfabrication techniques including fabrication of 3D microstructures, rapid prototyping, and inertness. While 3D printed materials have been studied for their biocompatibility in cell and tissue culture applications, their compatibility for in vitro biochemistry and molecular biology has not been systematically investigated. Here, we evaluate the compatibility of several common enzymatic reactions in the context of 3D-printed microfluidics: (1) polymerase chain reaction (PCR), (2) T7 in vitro transcription, (3) mammalian in vitro translation, and (4) reverse transcription. Surprisingly, all the materials tested significantly inhibit one or more of these in vitro enzymatic reactions. Inclusion of BSA mitigates only some of these inhibitory effects. Overall, inhibition appears to be due to a combination of the surface properties of the resins as well as soluble components (leachate) originating in the matrix.

While vat photopolymerization has many advantages over soft lithography in fabricating microfluidic devices, including efficiency and shape complexity, it has difficulty achieving well-controlled micrometer-sized (smaller than 100 μm) channels in the layer building direction. The considerable light penetration depth of transparent resin leads to over-curing that inevitably cures the residual resin inside flow channels, causing clogs. In this paper, a 3D printing process - in-situ transfer vat photopolymerization is reported to solve this critical over-curing issue in fabricating microfluidic devices. We demonstrate microchannels with high Z-resolution (within 10 μm level) and high accuracy (within 2 μm level) using a general method with no requirements on liquid resins such as reduced transparency nor leads to a reduced fabrication speed. Compared with all other vat photopolymerization-based techniques specialized for microfluidic channel fabrication, our universal approach is compatible with commonly used 405 nm light sources and commercial photocurable resins. The process has been verified by multifunctional devices, including 3D serpentine microfluidic channels, microfluidic valves, and particle sorting devices. This work solves a critical barrier in 3D printing microfluidic channels using the high-speed vat photopolymerization process and broadens the material options. It also significantly advances vat photopolymerization's use in applications requiring small gaps with high accuracy in the Z-direction., (© 2022. The Author(s).)

Robust in vitro investigations of the structure and function of integral membrane proteins has been a challenge due to the complexities of the plasma membrane and the numerous factors that influence protein behavior in live cells. Giant unilamellar vesicles (GUVs) are a biomimetic and highly tunable in vitro model system for investigating protein-membrane interactions and probing protein behavior in a precise, stimulus-dependent manner. In this protocol, we present an inexpensive and effective method for fabricating GUVs with the human serotonin 1A receptor (5-HT1AR) stably integrated in the membrane. We fabricate GUVs using a modified hydrogel swelling method; by depositing a lipid film on top of a mixture of agarose and 5-HT1AR and then hydrating the entire system, vesicles can be formed with properly oriented and functional 5-HT1AR incorporated into the membrane. These GUVs can then be used to examine protein-membrane interactions and localization behavior via microscopy. Ultimately, this protocol can advance our understanding of the functionality of integral membrane proteins, providing profound physiological insight.

Light-triggered unique shape transformation of calcein-loaded giant polymersomes with tubular protrusions, which serve as a reservoir membrane area during the shape transformation, is reported here. Under irradiation at the excitation wavelength of calcein, the tubular protrusions form strings of budded vesicles and then reintegrate into the mother vesicle. The initial giant polymersomes transform to two connected spherical vesicles via two pathways to alleviate the osmotic pressure imbalance across the vesicle membrane. The two connected spherical vesicles further transform to a mother vesicle with an inner daughter vesicle after switching off the light to relieve the bending energy. The finding provides a promising platform to mimic cell morphology changes., (© 2021 Wiley-VCH GmbH.)

Because of their surface localization, G protein-coupled receptors (GPCRs) are often pharmaceutical targets as they respond to a variety of extracellular stimuli (e.g., light, hormones, small molecules) that may activate or inhibit a downstream signaling response. The adenosine A 2A receptor (A 2A R) is a well-characterized GPCR that is expressed widely throughout the human body, with over 10 crystal structures determined. Truncation of the A 2A R C-terminus is necessary for crystallization as this portion of the receptor is long and unstructured; however, previous work suggests shortening of the A 2A R C-terminus from 412 to 316 amino acids (A 2A Δ316R) ablates downstream signaling, as measured by cAMP production, to below that of constitutive full-length A 2A R levels. As cAMP production is downstream of the first activation event-coupling of G protein to its receptor-investigating that first step in activation is important in understanding how the truncation effects native GPCR function. Here, using purified receptor and Gα s proteins, we characterize the association of A 2A R and A 2A Δ316R to Gα s with and without GDP or GTPγs using surface plasmon resonance (SPR). Gα s affinity for A 2A R was greatest for apo-Gα s , moderately affected in the presence of GDP and nearly completely ablated by the addition of GTPγs. Truncation of the A 2A R C-terminus (A 2A Δ316R) decreased the affinity of the unliganded receptor for Gα s by ∼20%, suggesting small changes to binding can greatly impact downstream signaling., (Copyright © 2021 Biophysical Society. Published by Elsevier Inc. All rights reserved.)

We present a microfluidic technique that generates asymmetric giant unilamellar vesicles (GUVs) in the size range of 2-14  μ m. In our method, we (i) create water-in-oil emulsions as the precursors to build synthetic vesicles, (ii) deflect the emulsions across two oil streams containing different phospholipids at high throughput to establish an asymmetric architecture in the lipid bilayer membranes, and (iii) direct the water-in-oil emulsions across the oil-water interface of an oscillating oil jet in a co-flowing confined geometry to encapsulate the inner aqueous phase inside a lipid bilayer and complete the fabrication of GUVs. In the first step, we utilize a flow-focusing geometry with precisely controlled pneumatic pressures to form monodisperse water-in-oil emulsions. We observed different regimes in forming water-in-oil multiphase flows by changing the applied pressures and discovered a hysteretic behavior in jet breakup and droplet generation. In the second step of GUV fabrication, an oil stream containing phospholipids carries the emulsions into a separation region where we steer the emulsions across two parallel oil streams using active dielectrophoretic and pinched-flow fractionation separations. We explore the effect of applied DC voltage magnitude and carrier oil stream flow rate on the separation efficiency. We develop an image processing code that measures the degree of mixing between the two oil streams as the water-in-oil emulsions travel across them under dielectrophoretic steering to find the ideal operational conditions. Finally, we utilize an oscillating co-flowing jet to complete the formation of asymmetric giant unilamellar vesicles and transfer them to an aqueous phase. We investigate the effect of flow rates on properties of the co-flowing jet oscillating in the whipping mode (i.e., wavelength and amplitude) and define the phase diagram for the oil-in-water jet. Assays used to probe the lipid bilayer membrane of fabricated GUVs showed that membranes were unilamellar, minimal residual oil remained trapped between the two lipid leaflets, and 83% asymmetry was achieved across the lipid bilayers of GUVs., (© 2021 Author(s).)

Carbon dioxide (CO 2 ) movement across cellular membranes is passive and governed by Fick's law of diffusion. Until recently, we believed that gases cross biological membranes exclusively by dissolving in and then diffusing through membrane lipid. However, the observation that some membranes are CO 2 impermeable led to the discovery of a gas molecule moving through a channel; namely, CO 2 diffusion through aquaporin-1 (AQP1). Later work demonstrated CO 2 diffusion through rhesus (Rh) proteins and NH 3 diffusion through both AQPs and Rh proteins. The tetrameric AQPs exhibit differential selectivity for CO 2 versus NH 3 versus H 2 O, reflecting physico-chemical differences among the small molecules as well as among the hydrophilic monomeric pores and hydrophobic central pores of various AQPs. Preliminary work suggests that NH 3 moves through the monomeric pores of AQP1, whereas CO 2 moves through both monomeric and central pores. Initial work on AQP5 indicates that it is possible to create a metal-binding site on the central pore's extracellular face, thereby blocking CO 2 movement. The trimeric Rh proteins have monomers with hydrophilic pores surrounding a hydrophobic central pore. Preliminary work on the bacterial Rh homologue AmtB suggests that gas can diffuse through the central pore and three sets of interfacial clefts between monomers. Finally, initial work indicates that CO 2 diffuses through the electrogenic Na/HCO 3 cotransporter NBCe1. At least in some cells, CO 2 -permeable proteins could provide important pathways for transmembrane CO 2 movements. Such pathways could be amenable to cellular regulation and could become valuable drug targets., Competing Interests: We declare we have no competing interests., (© 2021 The Author(s).)

Modern genomic sequencing efforts are identifying potential diagnostic and therapeutic targets more rapidly than existing methods can generate the peptide- and protein-based ligands required to study them. To address this problem, we have developed a microfluidic enrichment device (MFED) enabling kinetic off-rate selection without the use of exogenous competitor. We tuned the conditions of the device (bed volume, flow rate, immobilized target) such that modest, readily achievable changes in flow rates favor formation or dissociation of target-ligand complexes based on affinity. Simple kinetic equations can be used to describe the behavior of ligand binding in the MFED and the kinetic rate constants observed agree with independent measurements. We demonstrate the utility of the MFED by showing a 4-fold improvement in enrichment compared to standard selection. The MFED described here provides a route to simultaneously bias pools toward high-affinity ligands while reducing the demand for target-protein to less than a nanomole per selection.

We developed a 16-channel millifluidic reactor that uses a multiphase gas-liquid flow to continuously produce colloidal CsPbBr 3 quantum dots with a throughtput of ∼1 L h -1 . The optical properties of the product were monitored, and the reaction conditions were optimized in real time based on the in situ photoluminescence characteristics of the quantum dots.

Transition metal carbides (TMCs) have demonstrated outstanding potential for utilization in a wide range of catalytic applications because of their inherent multifunctionality and tunable composition. However, the harsh conditions required to prepare these materials have limited the scope of synthetic control over their physical properties. The development of low-temperature, carburization-free routes to prepare TMCs would unlock the versatility of this class of materials, enhance our understanding of their physical properties, and enable their cost-effective production at industrial scales. Here, we report an exceptionally mild and scalable solution-phase synthesis route to phase-pure molybdenum carbide (α-MoC 1- x ) nanoparticles (NPs) in a continuous flow millifluidic reactor. We exploit the thermolytic decomposition of Mo(CO) 6 in the presence of a surface-stabilizing ligand and a high boiling point solvent to yield MoC 1- x NPs that are colloidally stable and resistant to bulk oxidation in air. To demonstrate the utility of this synthetic route to prepare catalytically active TMC NPs, we evaluated the thermochemical CO 2 hydrogenation performance of α-MoC 1- x NPs dispersed on an inert carbon support. The α-MoC 1- x /C catalyst exhibited a 2-fold increase in both activity on a per-site basis and selectivity to C 2+ products as compared to the bulk α-MoC 1- x analogue.

Assays for chemical biomarkers are a vital component in the ecosystem of noninvasive disease state assessment, many of which rely on quantification by colorimetric reactions or spectrophotometry. While modern advances in microfluidic technology have enabled such classes of devices to be employed in medical applications, the challenge has persisted in adapting the necessary tooling and equipment to integrate spectrophotometry into a microfluidic workflow. Spectrophotometric measurements are common in biomarker assays because of straightforward acquisition, ease of developing the assay's mechanism of action, and ease of tuning sensitivity. In this work, 3D-printed, discrete microfluidic elements are leveraged to develop a model system for assaying hyaluronidase, a urinary biomarker of bladder cancer, via absorbance spectrometry of gold nanoparticle aggregation. Compared to laboratory microtiter plate-based techniques, the system demonstrates equivalent performance while remaining competitive in terms of resource and operation requirements and cost., (Copyright © 2019 Author(s).)

Liposomes are spherical vesicles enclosed by phospholipid bilayers. Nanoscale liposomes are widely employed for drug delivery in the pharmaceutical industry. In this study, nanoscale liposomes are fabricated using the microfluidic hydrodynamic focusing (MHF) approach, and the effects of flow rate ratio (FRR) on liposome size and drug loading efficiency are studied. Fluorescein isothiocyanate modified dextran is used as a hydrophilic drug simulant and Nile red is used as a hydrophobic drug simulant. The experiment results show that hydrophilic drug simulant loading efficiency increases as FRR increases and eventually plateaues at around 90% loading efficiency. The hydrophobic drug simulant loading efficiency and FRR have a positive linear correlation when FRR varies from 10 to 50. Concurrent loading of both hydrophilic and hydrophobic drug simulants maintains the same loading efficiencies as those of loading each drug simulant alone. A negative correlation between liposome size and FRR is also confirmed. Unloaded liposomes and hydrophilic drug-loaded liposomes are of the same sizes, and are smaller than the ones loaded with the hydrophobic drug simulants alone or combined. The results suggest tunable liposome size and drug loading efficiency with the MHF technique. This provides evidence to encourage further studies of microfluidic liposome fabrication in the pharmaceutical industry.

One of the obstacles preventing the commercialization of colloidal nanoparticle catalysts is the difficulty in fabricating these materials at scale while maintaining a high level of control over their resulting morphologies, and ultimately, their properties. Translation of batch-scale solution nanoparticle syntheses to continuous flow reactors has been identified as one method to address the scaling issue. The superior heat and mass transport afforded by the high surface-area-to-volume ratios of micro- and millifluidic channels allows for high control over reaction conditions and oftentimes results in decreased reaction times, higher yields, and/or more monodisperse size distributions compared to an analogous batch reaction. Furthermore, continuous flow reactors are automatable and have environmental health and safety benefits, making them practical for commercialization. Herein, a discussion of continuous flow methods, reactor design, and potential challenges is presented. A thorough account of the implementation of these technologies for the fabrication of catalytically active metal nanoparticles is reviewed for hydrogenation, electrocatalysis, and oxidation reactions.

Giant unilamellar protein vesicles (GUPs) were formed with the adenosine A2A receptor (A2AR) incorporated in the lipid bilayer and protein partitioning into the liquid ordered and liquid disordered phases was observed. When no ligand is bound, A2AR partitions preferentially into the liquid disordered phase of GUPs, while ligand-bound A2AR partitions into the liquid ordered phase.

In this study, we prepare giant lipid vesicles using vapor-deposited charged microporous poly(methacrylic acid- co-ethylene glycol diacrylate) polymer membranes with different morphologies and thicknesses. Our results suggest that vesicle formation is favored by thinner, more structured porous hydrogel substrates. Electrostatic interactions between the polymer and the lipid head groups affect vesicle yield and size distribution. Repulsive electrostatic interactions between the hydrogel and the lipid head groups promote vesicle formation; attractive electrostatic interactions suppress vesicle formation. Ionic strength and sugar concentration are also major parameters affecting the yield and size of giant vesicles. The presence of both ions and sugars in the hydration buffer results in increased vesicle yields. These results indicate that lipid-polymer interactions and osmotic effects in addition to the substrate morphology and surface charge are key factors affecting vesicle formation. Our data suggest that surface chemistry should be designed to tune electrostatic interactions with the lipid mixture of interest to promote vesicle formation. This vapor-deposited hydrogel fabrication technique offers tunability over the physicochemical properties of the hydrogel substrate for the production of giant vesicles with different sizes and compositions.

Using traditional 2-D photolithographic methods, surface patterns are made on agarose and used to form lipid vesicles with controlled size and layout. Depending on the size and layout of the patterned structures, the lipid bilayer vesicle size can be tuned and placement can be predetermined. Vesicles formed on 2-D patterned surfaces can be harvested for further investigations or can be assayed directly on the patterned surface. Lipid vesicles on the patterned surface are assayed for unilamellarity and protein incorporation, and vesicles are indeed unilamellar as observed from outer leaflet fluorescence quenching. Vesicles successfully incorporate the integral membrane protein α-hemolysin and maintain its membrane transport function.

For many engineering applications such as manipulating two phase flows, generating single and double emulsions, and passively propelling liquids through channels, control over the surface energy of microfluidic channels is essential. In particular, double emulsion formation, which benefits from alternating hydrophobic and hydrophilic sections of channel, represents a challenge in fabricating controlled microfluidic channel surface properties. As double emulsions find further applications in single-cell handling and analysis, straightforward methods for generating them increase in value. Here, we present a method for generating double emulsions in microfluidic channels fabricated from modular fluidic blocks. By using a vapor-phase polymer coating technology-initiated chemical vapor deposition-we are able to fabricate blocks with varying surface properties. Assembling these blocks together then creates step-like changes in surface energy within a microchannel., (© 2018 Elsevier Inc. All rights reserved.)

Giant Unilamellar Vesicles (GUVs) prepared from phospholipids are becoming popular membrane model systems for use in biophysical studies. The quality, size and yield of GUVs depend on the preparation method used to obtain them. In this study, hydrogels consisting of dextran polymers crosslinked by poly(ethylene glycol) (DexPEG) were used as hydrophilic frameworks for the preparation of vesicle suspensions under physiological ionic strength conditions. A comparative study was conducted using hydrogels with varied physicochemical properties to evaluate their performance for GUV production. The prepared GUVs were quantified by flow cytometry using the Coulter Principle to determine the yield and size distribution. We find that hydrogels of lower mechanical strength, increased swellability and decreased lipid interaction favour GUV production, while their resulting size is determined by the surface roughness of the hydrogel film. Moreover, we embedded polymersomes into the crosslinked hydrogel network, creating a DexPEG - polymersome hybrid film. The re-hydration of lipids on those hybrid substrates led to the production of GUVs and the efficient encapsulation of polymersomes in the lumen of GUVs.

While current research is centered on observing biophysical properties and phenomena in giant unilamellar vesicles (GUVs), little is known about fabrication parameters that control GUV formation. Using different lipids and rehydration buffers, we directly observe varying dynamics of hydrogel-assisted GUV formation via fluorescence microscopy. We observe the effects of buffer ionic strength, osmolarity, agarose density, and pH on the formation of GUVs using neutral and charged lipids. We find that increasing rehydration buffer ionic strength correlates with increased vesicle size and rate of GUV formation. Increasing buffer acidity increased the rate of GUV formation, while more basic environments slowed the rate. For buffers containing 500 mM sucrose, GUV formation was overall inhibited and only tubules formed. Observations of GUV formation dynamics elucidate parametric effects of charge, ionic strength, pH, and osmolarity, demonstrating the versatility of this biomimetic platform.

G protein-coupled receptor (GPCR) is incorporated into polymeric vesicles made up of diblock copolymer bilayers. Successfully incorporated GPCRs exhibit correct biased physiological orientation and respond to various ligands. After extended dehydrated storage via lyophilization and subsequent rehydration, diblock copolymer polymersomes retain their shape and incorporated GPCR retains its function., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Although the properties of the cell plasma membrane lipid bilayer are broadly understood to affect integral membrane proteins, details of these interactions are poorly understood. This is particularly the case for the large family of G protein-coupled receptors (GPCRs). Here, we examine the lipid dependence of the human serotonin 5-HT1A receptor, a GPCR that is central to neuronal function. We incorporate the protein in synthetic bilayers of controlled composition together with a fluorescent reporting system that detects GPCR-catalyzed activation of G protein to measure receptor-catalyzed oligonucleotide exchange. Our results show that increased membrane order induced by sterols and sphingomyelin increases receptor-catalyzed oligonucleotide exchange. Increasing membrane elastic curvature stress also increases this exchange. These results reveal the broad dependence that the 5-HT1A receptor has on plasma membrane properties, demonstrating that membrane lipid composition is a biochemical control parameter and highlighting the possibility that compositional changes related to aging, diet, or disease could impact cell signaling functions., (Copyright © 2016 Biophysical Society. Published by Elsevier Inc. All rights reserved.)

Oxidation is associated with conditions related to chronic inflammations and aging. Cubic structures have been observed in the smooth endoplasmic reticulum and mitochondrial membranes of cells under oxidative stress (e.g., tumor cells and virus-infected cells). It has been previously suspected that oxidation can result in the rearrangement of lipids from a fluid lamellar phase to a cubic structure in organelles containing membranes enriched with amphiphiles that have nonzero intrinsic curvature, such as phosphatidylethanolamine (PE) and cardiolipin. This study focuses on the oxidation of 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE), a lipid that natively forms an inverted hexagonal phase at physiological conditions. The oxidized samples contain an approximately 3:2 molar ratio of nonoxidized to oxidized DOPE. Optical microscopy images collected during the hydration of this mixture from a dried film suggest that the system evolves into a coexistence of a stable fluid lamellar phase and transient square lattice structures with unit cell sizes of 500-600 nm. Small-angle X-ray scattering of the same lipid mixture yielded a body-centered Im3m cubic phase with the lattice parameter of 14.04 nm. On average, the effective packing parameter of the oxidized DOPE species was estimated to be 0.657 ± 0.069 (standard deviation). This suggests that the oxidation of PE leads to a group of species with inverted molecular intrinsic curvature. Oxidation can create amphiphilic subpopulations that potently impact the integrity of the membrane, since negative Gaussian curvature intrinsic to cubic phases can enable membrane destabilization processes.

The translation of batch chemistries onto continuous flow platforms requires addressing the issues of consistent fluidic behaviour, channel fouling and high-throughput processing. Droplet microfluidic technologies reduce channel fouling and provide an improved level of control over heat and mass transfer to control reaction kinetics. However, in conventional geometries, the droplet size is sensitive to changes in flow rates. Here we report a three-dimensional droplet generating device that exhibits flow invariant behaviour and is robust to fluctuations in flow rate. In addition, the droplet generator is capable of producing droplet volumes spanning four orders of magnitude. We apply this device in a parallel network to synthesize platinum nanoparticles using an ionic liquid solvent, demonstrate reproducible synthesis after recycling the ionic liquid, and double the reaction yield compared with an analogous batch synthesis.

Lipid oxidation has been linked to plasma membrane damage leading to cell death. In previous work, we examined the effect of oxidation on bilayer permeability by replacing defined amounts of an unsaturated lipid species with the corresponding phospholipid product that would result from oxidative tail scission of that species. This study adds the cleaved tail fragment, better mimicking the chemical results of oxidation. Permeability of PEG12-NBD, a small, uncharged molecule, was measured for vesicles with oxidation concentration corresponding to between 0 and 18 mol % of total lipid content. Permeability was measured using a microfluidic trap to capture the vesicles and spinning disk confocal microscopy (SDCM) to measure the transport of fluorescent PEG12-NBD at the equatorial plane. The thicknesses of lipid bilayers containing oxidized species were estimated by measuring capacitance of a black lipid membrane while simultaneously measuring bilayer area. We found that relative to chemically modeled oxidized bilayers without tail fragments, bilayers containing cleaved tail groups were less permeable for the same degree of oxidation. Curiously, membrane capacitance measurements indicated that the addition of tail fragments to chemically modeled oxidized bilayers also thinned these bilayers relative to samples with no tail fragments; in other words, the more permeable membranes were thicker. Above 12.5% chemically modeled oxidation, compositions both with and without the cleaved tail groups showed pore formation. This work highlights the complexity of the relationship between chemically modeled lipid bilayer oxidation and cell membrane properties.

A discrete microfluidic element with integrated thermal sensor was fabricated and demonstrated as an effective probe for process monitoring and prototyping. Elements were constructed using stereolithography and market-available glass-bodied thermistors within the modular, standardized framework of previous discrete microfluidic elements demonstrated in the literature. Flow rate-dependent response due to sensor self-heating and microchannel heating and cooling was characterized and shown to be linear in typical laboratory conditions. An acid-base neutralization reaction was performed in a continuous flow setting to demonstrate applicability in process management: the ratio of solution flow rates was varied to locate the equivalence point in a titration, closely matching expected results. This element potentially enables complex, three-dimensional microfluidic architectures with real-time temperature feedback and flow rate sensing, without application specificity or restriction to planar channel routing formats.

Microfluidic devices can be used to execute a variety of continuous flow analytical and synthetic chemistry protocols with a great degree of precision. The growing availability of additive manufacturing has enabled the design of microfluidic devices with new functionality and complexity. However, these devices are prone to larger manufacturing variation than is typical of those made with micromachining or soft lithography. In this report, we demonstrate a design-for-manufacturing workflow that addresses performance variation at the microfluidic element and circuit level, in context of mass-manufacturing and additive manufacturing. Our approach relies on discrete microfluidic elements that are characterized by their terminal hydraulic resistance and associated tolerance. Network analysis is employed to construct simple analytical design rules for model microfluidic circuits. Monte Carlo analysis is employed at both the individual element and circuit level to establish expected performance metrics for several specific circuit configurations. A protocol based on osmometry is used to experimentally probe mixing behavior in circuits in order to validate these approaches. The overall workflow is applied to two application circuits with immediate use at on the bench-top: series and parallel mixing circuits that are modularly programmable, virtually predictable, highly precise, and operable by hand.

Islet amyloid polypeptide (IAPP) is a 37-amino acid amyloid protein intimately associated with pancreatic islet β-cell dysfunction and death in type II diabetes. In this study, we combine spectroscopic methods and microscopy to investigate α-helical IAPP-membrane interactions. Using light scattering and fluorescence microscopy, we observe that larger vesicles become smaller upon treatment with human or rat IAPP. Electron microscopy shows the formation of various highly curved structures such as tubules or smaller vesicles in a membrane-remodeling process, and spectrofluorometric detection of vesicle leakage shows disruption of membrane integrity. This effect is stronger for human IAPP than for the less toxic rat IAPP. From CD spectra in the presence of different-sized vesicles, we also uncover the membrane curvature-sensing ability of IAPP and find that it transitions from inducing to sensing membrane curvature when lipid negative charge is decreased. Our in vivo EM images of immunogold-labeled rat IAPP and human IAPP show both forms to localize to mitochondrial cristae, which contain not only locally curved membranes but also phosphatidylethanolamine and cardiolipin, lipids with high spontaneous negative curvature. Disruption of membrane integrity by induction of membrane curvature could apply more broadly to other amyloid proteins and be responsible for membrane damage observed in other amyloid diseases as well., (© 2015 by The American Society for Biochemistry and Molecular Biology, Inc.)

Lipid bilayers form the boundaries of the cell and its organelles. Many physiological processes, such as cell movement and division, involve bending and folding of the bilayer at high curvatures. Currently, bending of the bilayer is treated as an elastic deformation, such that its stress-strain response is independent of the rate at which bending strain is applied. We present here the first direct measurement of viscoelastic response in a lipid bilayer vesicle. We used a dual-beam optical trap (DBOT) to stretch 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) giant unilamellar vesicles (GUVs). Upon application of a step optical force, the vesicle membrane deforms in two regimes: a fast, instantaneous area increase, followed by a much slower stretching to an eventual plateau deformation. From measurements of dozens of GUVs, the average time constant of the slower stretching response was 0.225 ± 0.033 s (standard deviation, SD). Increasing the fluid viscosity did not affect the observed time constant. We performed a set of experiments to rule out heating by laser absorption as a cause of the transient behavior. Thus, we demonstrate here that the bending deformation of lipid bilayer membranes should be treated as viscoelastic.

Here we demonstrate the production of a functioning cell model by formation of giant vesicles reconstituted with the GLUT1 glucose transporter and a glucose oxidase and hydrogen peroxidase linked fluorescent reporter internally. Hence, a simplified artificial cell is formed that is able to take up glucose and process it.

Oxidation of unsaturated lipids in cellular membranes has been shown to cause severe membrane damage and potentially cell death. The presence of oxidized lipid species in the membrane is known to cause changes in membrane properties, such as decreased fluidity. This study uses giant unilamellar vesicles (GUVs) to measure passive transport across membranes containing defined concentrations of oxidized lipid species. GUVs consisting of a saturated phospholipid, an unsaturated phospholipid, and cholesterol were used as model membranes. By replacing defined amounts of the unsaturated lipid with a corresponding oxidized product, the oxidation process could be mimicked, yielding vesicles of varying oxidized lipid concentration. Oxidized lipid concentration was varied from 0 mol% to 18 mol% of the total lipid concentration. Passive transport of PEG12-NBD, an uncharged fluorescent molecule, was measured using a microfluidic trap to capture the GUVs and spinning disk confocal microscopy (SDCM) to track the transport of a fluorescent species in the equatorial plane of each GUV. Membrane permeability was determined by fitting the resulting concentration profiles to a finite difference model of diffusion and permeation around and through the membrane. Experiments showed three permeability regimes. Without oxidation, transport was slow, with a measured permeability on the order of 1.5 × 10(-6) cm s(-1). At 2.5-10% oxidized species permeation was fast (1.5 × 10(-5) cm s(-1)). Above 12.5% oxidized species, the bilayer was disrupted by the formation of pore defects. As passive transport is an important mechanism for drug delivery, understanding the relationship between oxidation and permeation could provide insight into the pharmaceutical characteristics of tissues with oxidative damage.

Synthetic lipid bilayers have long been used as models of cell membranes. The compositional asymmetry in the eukaryotic plasma membrane is a key chemical characteristic of this membrane that has traditionally been difficult to reproduce in synthetic systems. In this chapter, we describe recent technologies for fabricating compositionally asymmetric giant unilamellar lipid vesicles (GUVs) and provide detailed protocols for a microfluidic-based fabrication technique.

Microfluidic systems are rapidly becoming commonplace tools for high-precision materials synthesis, biochemical sample preparation, and biophysical analysis. Typically, microfluidic systems are constructed in monolithic form by means of microfabrication and, increasingly, by additive techniques. These methods restrict the design and assembly of truly complex systems by placing unnecessary emphasis on complete functional integration of operational elements in a planar environment. Here, we present a solution based on discrete elements that liberates designers to build large-scale microfluidic systems in three dimensions that are modular, diverse, and predictable by simple network analysis techniques. We develop a sample library of standardized components and connectors manufactured using stereolithography. We predict and validate the flow characteristics of these individual components to design and construct a tunable concentration gradient generator with a scalable number of parallel outputs. We show that these systems are rapidly reconfigurable by constructing three variations of a device for generating monodisperse microdroplets in two distinct size regimes and in a high-throughput mode by simple replacement of emulsifier subcircuits. Finally, we demonstrate the capability for active process monitoring by constructing an optical sensing element for detecting water droplets in a fluorocarbon stream and quantifying their size and frequency. By moving away from large-scale integration toward standardized discrete elements, we demonstrate the potential to reduce the practice of designing and assembling complex 3D microfluidic circuits to a methodology comparable to that found in the electronics industry.

We have studied the dynamics of Lissamine Rhodamine B dye sensitization-induced oxidation of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) giant unilamellar vesicles (GUVs), where the progression of the underlying chemical processes was followed via vesicle membrane area changes. The surface-area-to-volume ratio of our spherical GUVs increased after as little as ten seconds of irradiation. The membrane area expansion was coupled with high amplitude fluctuations not typical of GUVs in isoosmotic conditions. To accurately measure the area of deformed and fluctuating membranes, we utilized a dual-beam optical trap (DBOT) to stretch GUV membranes into a geometrically regular shape. Further oxidation led to vesicle contraction, and the GUVs became tense, with micron-scale pores forming in the bilayer. We analyzed the GUV morphological behaviors as two consecutive rate-limiting steps. We also considered the effects of altering DOPC and 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine-N-(lissamine rhodamine B sulfonyl) (RhDPPE) concentrations. The resulting kinetic model allows us to measure how lipid molecular area changes during oxidation, as well as to determine the rate constants controlling how quickly oxidation products are formed. Controlled membrane oxidation leading to permeabilization is also a potential tool for drug delivery based on engineered photosensitizer-containing lipid vesicles., (Copyright © 2014 Elsevier B.V. All rights reserved.)

We demonstrate successful incorporation of the G protein coupled receptor 5-HT1A into giant unilamellar vesicles using an agarose rehydration method. With direct observation using fluorescence techniques, we report preferential segregation of 5-HT1A into the cholesterol-poor liquid disordered phase of the membrane, contradicting previous reports of lipid raft segregation. Furthermore, altering the concentration of cholesterol and sphingomyelin in ternary mixtures does not alter 5-HT1A segregation into the liquid disordered phase.

We have demonstrated the application of low surface energy fluoropolymer coatings onto poly(dimethylsiloxane) (PDMS) microfluidic devices for droplet formation and extraction-induced merger of droplets. Initiated chemical vapor deposition (iCVD) was used to pattern fluoropolymer coatings within microchannels based on geometrical constraints. In a two-phase flow system, the range of accessible flow rates for droplet formation was greatly enhanced in the coated devices. The ability to controllably apply the coating only at the inlet facilitated a method for merging droplets. An organic spacer droplet was extracted from between a pair of aqueous droplets. The size of the organic droplet and the flow rate controlled the time to merge the aqueous droplets; the process of merging was independent of the droplet sizes. Extraction-induced droplet merging is a robust method for manipulating droplets that could be applied in translating multi-step reactions to microfluidic platforms.

We present a novel chemically cross-linked dextran-poly(ethylene glycol) hydrogel substrate for the preparation of dense vesicle suspensions under physiological ionic strength conditions. These vesicles can be easily diluted for individual study. Modulating the degree of cross-linking within the hydrogel network results in tuning of the vesicle size distribution.

We demonstrate a new approach for direct reconstitution of membrane proteins during giant vesicle formation. We show that it is straightforward to create a tissue-like giant vesicle film swelled with membrane protein using aquaporin SoPIP2;1 as an illustration. These vesicles can also be easily harvested for individual study. By controlling the lipid composition we are able to direct the aquaporin into specific immiscible liquid domains in giant vesicles. The oligomeric α-helical protein cosegregates with the cholesterol-poor domains in phase separating ternary mixtures.

Vesosomes - hierarchical assemblies consisting of membrane-bound vesicles of various scales - are potentially powerful models of cellular compartmentalization. Current methods of vesosome fabrication are labor intensive, and offer little control over the size and uniformity of the final product. In this article, we report the development of an automated vesosome formation platform using a microfluidic device and a continuous flow microcentrifuge. In the microfluidic device, water-in-oil droplets containing nanoscale vesicles in the water phase were formed using T-junction geometry, in which a lipid monolayer is formed at the oil/water interface. These water-in-oil droplets were then immediately transferred to the continuous flow microcentrifuge. When a water-in-oil droplet passed through a second lipid monolayer formed in the continuous flow microcentrifuge, a bilayer-encapsulated vesosome was created, which contained all of the contents of the aqueous phase encapsulated within the vesosome. Encapsulation of nanoscale liposomes within the outer vesosome membrane was confirmed by fluorescence microscopy. Laser diffraction analysis showed that the vesosomes we fabricated were uniform (coefficient of variation of 0.029). The yield of the continuous flow microcentrifuge is high, with over 60% of impinging water droplets being converted to vesosomes. Our system provides a fully automatable route for the generation of vesosomes encapsulating arbitrary contents. The method employed in this work is simple and can be readily applied to a variety of systems, providing a facile platform for fabricating multicomponent carriers and model cells., (Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Liposomes are important biomolecular nanostructures for handling membrane-associated molecules in the lab and delivering drugs in the clinic. In addition to their biomedical applications, they have been widely used as model cell membranes in biophysical studies. Here we present a liposome-based model membrane that mimics the attachment of membrane-resident molecules to the cytoskeleton. To facilitate this attachment, we have developed a lipid-based hybrid nanostructure in which the liposome bilayer membrane is covalently anchored to a biocompatible poly(ethylene) glycol (PEG) hydrogel core using short double-stranded DNA (dsDNA) linkers. The dsDNA linkers connect cholesterol groups that reside in the bilayer to vinyl groups that are incorporated in the cross-linked hydrogel backbone. Size exclusion chromatography (SEC) of intact and surfactant-treated nanoparticles confirms the formation of anchored hydrogel structures. Transmission electron microscopy (TEM) shows ~100 nm nanoparticles even after removal of unanchored phospholipids. The location of dsDNA groups at the hydrogel-bilayer interface is confirmed with a fluorescence assay. Using DNA as a linker between the bilayer and a hydrogel core allows for temperature-dependent release of the anchoring interaction, produces polymer nanogels with addressible hybridization sites on their surface, and provides a prototype structure for potential future oligonucleotide drug delivery applications.

Measurements of lipid bilayer bending modulus by various techniques produce widely divergent results. We attempt to resolve some of this ambiguity by measuring bending modulus in a system that can rapidly process large numbers of samples, yielding population statistics. This system is based on optical stretching of giant unilamellar vesicles (GUVs) in a microfluidic dual-beam optical trap (DBOT). The microfluidic DBOT system is used here to measure three populations of GUVs with distinct lipid compositions. We find that gel-phase membranes are significantly stiffer than liquid-phase membranes, consistent with previous reports. We also find that the addition of cholesterol does not alter the bending modulus of membranes composed of a monounsaturated phospholipid.

Cholesterol (CHOL) molecules play a key role in modulating the rigidity of cell membranes and controlling intracellular transport and signal transduction. Using an all-atom molecular dynamics approach, we study the process of CHOL interleaflet transport (flip-flop) in a dipalmitoylphosphatidycholine (DPPC)-CHOL bilayer over a time period of 15 μs. We investigate the effect of the flip-flop process on mechanical stress across the bilayer and the role of CHOL in inducing molecular order in bilayer leaflets. The simulations are carried out at physiologically relevant CHOL concentration (30%), temperature (323 K), and pressure (1 bar). CHOL flip-flop events are observed with a rate constant of 3 × 10⁴s⁻¹. Once a flip-flop event is triggered, a CHOL molecule takes an average of 73 nanoseconds to migrate from one bilayer leaflet to the other., (Copyright © 2013 Biophysical Society. Published by Elsevier Inc. All rights reserved.)

Imidazolium-based ionic liquids have been widely utilized as versatile solvents for metal nanoparticle synthesis; however, reactions to synthesize silver nanoparticles that are performed identically in different commercially obtained lots of 1-butyl-3-methylimidazolium tetrafluoroborate (BMIM-BF(4)) give divergent results. This suggests that impurities in these nominally identical solvents play an important role in the resulting silver nanoparticle quality. To test the effect that impurities have on the quality of silver nanoparticles synthesized in BMIM-BF(4), silver nanoparticles were synthesized in carefully prepared and purified BMIM-BF(4) and compared against silver nanoparticles that were synthesized in the purified BMIM-BF(4) that had been spiked with trace amounts of water, chloride, and 1-methylimidazole. It was clearly demonstrated that trace amounts of these common ionic liquid impurities cause significant deviation in size and shape (creating polydisperse and irregularly shaped ensembles of both large and small particles), and also negatively impact the stabilization of the resulting silver nanoparticles.