Search

New biocements based on a powdered mixture of calcium phosphate/monetite (TTCPM) modified with the addition of honey were prepared by mixing the powder and honey liquid components at a non-cytotoxic concentration of honey (up to 10% (w/v)). The setting process of the cements was not affected by the addition of honey, and the setting time of ~4 min corresponded to the fast setting calcium phosphate cements (CPCs). The cement powder mixture was completely transformed into calcium-deficient nanohydroxyapatite after 24 h of hardening in a simulated body fluid, and the columnar growth of long, needle-like nanohydroxyapatite particles around the original calcium phosphate particles was observed in the honey cements. The compressive strength of the honey cements was reduced with the content of honey in the cement. Comparable antibacterial activities were found for the cements with honey solutions on Escherichia coli, but very low antibacterial activities were found for Staphylococcus aureus for all the cements. The enhanced antioxidant inhibitory activity of the composite extracts was verified. In vitro cytotoxicity testing verified the non-cytotoxic nature of the honey cement extracts, and the addition of honey promoted alkaline phosphatase activity, calcium deposit production, and the upregulation of osteogenic genes (osteopontin, osteocalcin, and osteonectin) by mesenchymal stem cells, demonstrating the positive synergistic effect of honey and CPCs on the bioactivity of cements that could be promising therapeutic candidates for the repair of bone defects.

This study was designed to investigate the effects of hydroxyapatite (HA) ceramic implants (HA cylinders, perforated HA plates, and nonperforated HA plates) on the healing of bone defects, addressing biocompatibility, biodegradability, osteoconductivity, osteoinductivity, and osteointegration with the surrounding bone tissue. The HA ceramic implants were prepared using the tape-casting method, which allows for shape variation in samples after packing HA paste into 3D-printed plastic forms. In vitro, the distribution and morphology of the MC3T3E1 cells grown on the test discs for 2 and 9 days were visualised with a fluorescent live/dead staining assay. The growth of the cell population was clearly visible on the entire ceramic surfaces and very good osteoblastic cell adhesion and proliferation was observed, with no dead cells detected. A sheep animal model was used to perform in vivo experiments with bone defects created on the metatarsal bones, where histological and immunohistochemical tissue analysis as well as X-ray and CT images were applied. After 6 months, all implants showed excellent biocompatibility with the surrounding bone tissue with no observed signs of inflammatory reaction. The histomorphological findings revealed bone growth immediately over and around the implants, indicating the excellent osteoconductivity of the HA ceramic implants. A number of islands of bone tissue were observed towards the centres of the HA cylinders. The highest degree of biodegradation, bioresorption, and new bone formation was observed in the group in which perforated HA plates were applied. The results of this study suggest that HA cylinders and HA plates may provide a promising material for the functional long-bone-defect reconstruction and further research.

The present study is focused on the synthesis and structural properties of amorphous terbium metal–organic framework thin film (TbMOF-TF) and its transformation to terbium oxide by pyrolysis at 450 °C in the air. The crystalline (cTbMOF) and amorphous (aTbMOF) films were prepared by solvothermal synthesis using different amounts (0.4 and 0.7 mmol) of the modulator (sodium acetate), respectively. The powders were characterized by differential scanning calorimetry (DSC), thermogravimetry (TG), Fourier transform infrared (FTIR), Raman spectroscopy, and scanning electron microscopy (SEM). The varied chemical composition of the surface of TbMOFs and TbxOy was investigated by X-ray photoelectron spectroscopy (XPS). X-ray diffraction (XRD) and transmission electron microscopy (TEM) revealed that aTbMOF had been fully transformed to a Tb4O7 phase with a cubic crystal structure at 450 °C. The amorphous aTbMOF-TF film was prepared by dropping a colloidal solution of amorphous precursor nanocrystals on the SiO2/Si substrates covered with Pt as an interlayer. XPS confirmed the presence of Tb in two states, Tb3+ and Tb4+. The amorphous film has a rough, porous microstructure and is composed of large clusters of worm-like particles, while terbium oxide film consists of fine crystallites of cubic fluorite cF-TbOx, c-Tb4O7, and c-Tb2O3 phases. The surface topography was investigated by a combination of confocal (CM) and atomic force microscopy (AFM). The amorphous film is porous and rough, which is contrast to the crystalline terbium oxide film.

This study presents the synthesis, structural and luminescence properties for lanthanide metal–organic frameworks (LnMOFs), which belong to the sub-class of coordination polymers. The series of nanosized LnMOFs (Ln = Eu, Gd, Tb, Eu0.5Gd0.5, Tb0.5Gd0.5 and Eu0.5Tb0.5) was prepared by solvothermal synthesis using a modulator (sodium acetate). We investigated the various surface chemistry compositions of the isostructural LnMOFs with a [Ln(btc)] structure (BTC: Benzene-1,3,5-tricarboxylate) by X-ray photoelectron spectroscopy (XPS). The XPS confirmed the mixed-valent Eu3+ and Eu2+ compounds, and the presence of Tb in both +3 and +4 valence states, and one +3 valency of Gd. A nanostructure of mixed LnMOFs (EuGd, TbGd and EuTb) with a rod-like shape is related to luminescence properties. The MOFs (EuTb and EuGd) presented Comission Internationale de l’Éclairage (CIE) chromaticities of x = 0.666 and y = 0.331, and x = 0.654 and y = 0.348, respectively, in the red region. They were better than the values desired for use in commercial phosphors, which are x = 0.64 and y = 0.35. For [Tb/Gd(btc)], the CIE coordinates were x = 0.334 and y = 0.562, presenting emissions in the green region. Bimetallic LnMOFs are very promising UV light sensors for biological applications.

(1) Background: The preparation and characterization of novel fully injectable enzymatically hardened tetracalcium phosphate/monetite cements (CXI cements) using phytic acid/phytase (PHYT/F3P) hardening liquid with a small addition of polyacrylic acid/carboxymethyl cellulose anionic polyelectrolyte (PAA/CMC) and enhanced bioactivity. (2) Methods: Composite cements were prepared by mixing of calcium phosphate powder mixture with hardening liquid containing anionic polyelectrolyte. Phase and microstructural analysis, compressive strength, release of ions and in vitro testing were used for the evaluation of cement properties. (3) Results: The simple possibility to control the setting time of self-setting CXI cements was shown (7–28 min) by the change in P/L ratio or PHYT/F3P reaction time. The wet compressive strength of cements (up to 15 MPa) was close to cancellous bone. The increase in PAA content to 1 wt% caused refinement and change in the morphology of hydroxyapatite particles. Cement pastes had a high resistance to wash-out in a short time after cement mixing. The noncytotoxic character of CX cement extracts was verified. Moreover, PHYT supported the formation of Ca deposits, and the additional synergistic effect of PAA and CMC on enhanced ALP activity was found, along with the strong up-regulation of osteogenic gene expressions for osteopontin, osteocalcin and IGF1 growth factor evaluated by the RT-qPCR analysis in osteogenic αMEM 50% CXI extracts. (4) Conclusions: The fully injectable composite calcium phosphate bicements with anionic polyelectrolyte addition showed good mechanical and physico-chemical properties and enhanced osteogenic bioactivity which is a promising assumption for their application in bone defect regeneration.

The objective of the study was to assess the usefulness of acute-phase proteins (APPs) and serum enzymes in the evaluation of post-operative state after cartilage reconstruction in an animal model (Sus scrofa domesticus). Fifteen clinically healthy female pigs were evaluated during the first 30 days after the repair of experimentally induced articular cartilage defects using two types of biocement powders. Animals were divided into groups according to the type of biocement powder used: CAK—with amino acids (n = 6), C—without amino acids (n = 6) and the control group (Ctr) was without biocement (n = 3). The concentrations of selected APPs—serum amyloid A (SAA), haptoglobin (Hp) and C-reactive protein (CRP), and the activities of some serum enzymes—creatine kinase (CK), alkaline phosphatase (AP), and lactate dehydrogenase (LD) were measured one day before the surgery and on days 7, 14, and 30 after the surgical intervention. The most significant changes during the evaluated period were observed in the concentrations of SAA (p < 0.001) and Hp (p < 0.001), with marked increase of values 7 days after surgery. There was a numerical, but not statistically significant, difference between CAK, C and Ctr groups (p > 0.05). Marked variations were observed also in the activities of the evaluated enzymes, with the most significant changes in the activity of AP in the CAK group (p < 0.001). Presented results suggest possible usefulness of some APPs and serum enzymes in the evaluation of post-operative inflammatory state after the reconstruction of articular cartilage defects.

A tetracalcium phosphate/monetite/calcium sulfate hemihydrate powder cement mixture (CAS) in the form of a paste was used as a socket preservative to prevent alveolar ridge resorption after the extraction of the second premolar tooth in the mandible of a pig model. During the post-surgery period, the animals were monitored daily. No signs of inflammation, infection, or other complications were observed in the defect site for six months. Six months after surgery, the mandible defects in pigs were evaluated using macroscopic, histological, and radiological techniques. Treatment of the extraction sites with CAS biocement resulted in the uniform filling of the defects with alveolar bone tissue, characterized by a relatively smooth and homogeneous gum surface with no visible biocement residues. The formation of new bone tissue with osteoblasts, osteocytes, and mineralized matrices was confirmed. The results showed the similar morphology, thickness, and complete integration of the newly formed bone with the surrounding tissue. CAS biocement could be an effective material to prevent alveolar bone reduction as well as soft tissue loss and could support dental implant placement with long-term functionality.

Reconstruction of bone defects and maintaining the continuity of the mandible is still a challenge in the maxillofacial surgery. Nowadays, the biomedical research within bone defect treatment is focussed on the therapy of using innovative biomaterials with specific characteristics consisting of the body’s own substances. Hydroxyapatite ceramic scaffolds have fully acceptable phase compositions, microstructures and compressive strengths for their use in regenerative medicine. The innovative hydroxyapatite ceramics used by us were prepared using the tape-casting method, which allows variation in the shape of samples after packing hydroxyapatite paste to 3D-printed plastic form. The purpose of our qualitative study was to evaluate the regenerative potential of the innovative ceramic biomaterial prepared using this method in the therapy of the cortical bone of the lower jaw in four mature pigs. The mandible bone defects were evaluated after different periods of time (after 3, 4, 5 and 6 months) and compared with the control sample (healthy cortical bone from the opposite side of the mandible). The results of the morphological, clinical and radiological investigation and hardness examination confirmed the positive regenerative potential of ceramic implants after treatment of the mandible bone defects in the porcine mandible model.

The symptomatic full-thickness cartilage lesions or cartilage degeneration leads to the destruction of the normal chondral architecture and bone structure in affected area, causes the osteoarthritis, and general damage to the health. Knee joints are most frequently affected by this condition. The permanent damage of the articular cartilage and subchondral bone has motivated many scientists and clinicians to explore new methods of regeneration of osteochondral defects, such as novel materials. We studied the potential of the biocement based on calcium phosphate consisting of a mixture of four amino acids (glycine, proline, hydroxyproline and lysine) in the regenerating process of the artificially created osteochondral defect on the porcine medial femoral condyle in the stifle joint. The mass ratio of the amino acids in biocement CAL was 4:2:2:1. The Ca/P ratio in cement was 1.67 which correspond with ratio in hydroxyapatite. We compared the results with spontaneous healing of an artificially created cyst with that of the healthy tissue. The animal group treated with biocement paste CAL presented completely filled osteochondral defects. The results were confirmed by histological and radiological assessments, which have shown regenerated chondral and bone tissue in the examined knee joints. Macroscopic evaluation showed that neocartilage was well integrated with the adjacent native cartilage in animal group with biocement CAL, compared with healing of the artificial cyst, where treated cartilage surfaces were visibly lower than the surrounding native cartilage surface and a border between native and restored tissue was apparent. The qualitative assessment of the implant histology specimens showed full regeneration of the hyaline cartilage and subchondral bone in animals with biocement CAL. The artificial cyst group showed remarkable fibrillation. The detailed MRI analysis of cross-section of osteochondral defect confirmed the complete cartilage and subchondral bone healing where the thickness of the regenerated cartilage was 1.5 mm. The MRI imaging of defects in the artificial cyst group showed incomplete healing, neo cartilage tissue reduced up to 50%.

The repair of articular cartilage defects is an intensively developing area of research. Severe inflammatory reactions after surgical interventions on bones or their structures may lead to changes of bone or joint asymmetry. In laboratory diagnostics, some inflammatory biomarkers and serum enzymes are available for the evaluation of these inflammatory processes. A general understanding of inflammatory responses following the repair of cartilage defects is still lacking. The aim of this study was to describe the alterations in the values of five inflammatory markers and the activities of several enzymes in seven 5-month-old pigs within the first 30 days following the restoration of induced articular cartilage defects using the tetracalcium phosphate/nanomoneite cement powder enriched with amino acids (CAL). The reconstruction of surgically induced defects was accompanied by a significant increase of serum amyloid A (SAA, p < 0.05), haptoglobin (Hp, p < 0.001), C-reactive protein (CRP, p < 0.01), and pig major acute phase protein (pig-MAP, p < 0.001). Their concentrations decreased gradually within one-month post-surgery, the values recorded at the end of this period were higher than those obtained prior to surgery. The concentrations of α1-acid glycoprotein (AGP) showed no significant changes during the evaluated period. Alterations were also found in the enzyme activities of creatine kinase (p < 0.05), lactate-dehydrogenase and alkaline phosphatase (p < 0.01). These findings suggest that SAA, Hp, CRP and pig-MAP might be applicable biomarkers of acute phase response for the monitoring of postoperative period.

After the medial femoral condyle (MFC), the phalanges are the second most common site for osseous cyst-like lesions (OCLLs). Conservative treatment of phalangeal cysts on the convex surface of proximal phalanx presents a technical problem with access to the stoma of the cyst. Surgical therapy options usually aim to avoid cyst enlargement through drilling or screw placement or to encourage lesion filling with osteoconductive material. This paper describes a case of treatment of the OCLL in a yearling Czech warmblood filly with surgical arthrodesis, together with the packing of the OCLL with calcium phosphate biocement (CPB). The filly showed a chronic, moderate to severe, intermittent left hindlimb lameness. Dynamic examination combined with regional anesthesia and radiography confirmed a clinically significant large OCLL on the distal joint surface of the first phalanx. Treatment of the OCLL was performed by surgical arthrodesis of the proximal interphalangeal joint, using two paraxial and one axial crossed lag screw, after curetting of the cyst and filling with CPB.

Na doped lead magnesium niobate Pb(Mg1/3Nb2/3)O3 (Na-PMN) thin films of 100 nm thickness were prepared by modified sol-gel route with niobium precursor. Na-PMN films were deposited from sol derived using tartaric acid modified polymerizable complex method by mixing of Nb-tartarate (Pechini) complex with Na, Pb and Mg acetates at 80°C with molar ratio of Na : Pb : Mg : Nb = 1/2 : 1 :1/3 : 2/3 on Pt/Al2O3 substrates by spin-coating method. In Na doped PMN film the perovskite Pb(Mg1/3Nb2/3)O3 phase (65 vol. %) and a small amount of pyrochlore Na2Nb8O21 phase were revealed after sintering at 650°C. In the microstructure of 2-layered Na-PMN/Pt/Al2O3 thin film, with ~9.5 nm of roughness, the bimodal particle distribution was observed with small spherical particles of pyrochlore phase and larger sponge-like particles of the perovskite phase. The smallest visible spherical particles (~30 nm) and mutually interconected particles (~125 nm) were found in TEM and AFM micrographs.

Pb(Zr0.52Ti0.48)O3 (PZT) sols were prepared by a modified sol-gel route using both solvents - acetic acid and stabilizer solution (n-propanol : 1,2-propanediol in the rate 10 : 1). The sols were deposited by spin-coating onto platinized Al2O3 or SiO2/Si substrates. Results of SEM and XRD analyses confirmed, that the transformation of the amorphous PZT film to perovskite structure happened after sintering at 650°C. The mechanism of microstructure formation has described for morphologicaly different perovskite particle types in 1, 2 and 3-layered PZT thin films with thickness of 200-500 nm on used substrates. Three different PZT film microstructure types in dependence on the applied sol concentration were found. It was found, that the PZT/Pt/Al2O3 film microstructure at 1.0 M sol concentration was composed of two forms of perovskite particles, big rosette and irregular cuboidal particles. Small spherical particles and rosette structure were found in PZT/Pt/Si/SiO2 films.

Transparent Eu and Nd doped lanthanum niobate tantalate La1/3Nb0.8Ta0.2O3 (LNT) thin films (∼150 nm) were prepared by sol–gel/spin-coating process on Pt/SiO2/Si substrates and annealing at 1100 °C. The x-ray diffraction analysis of films confirmed formation of the perovskite La1/3NbO3 and La1/3TaO3 phases with traces of pyrochlore LaNbO4. Eu and Nd doped LNT films were smoother with roughness 17.1 and 25.4 nm in comparison with LNT (43.3 nm). In all films was observed heterogeneous microstructure with the perovskite spherical and pyrochlore needle-like particles. The mechanical properties of films were characterized for the first time by conventional and continuous stiffness (CSM) nanoindentation. The Eu and Nd doped LNT film modulus (E) and hardness (H) were higher than LNT (∼99.8 and 4.4 GPa) determined by conventional nanoindentation. It was measured the significant effect of substrate on properties of Eu or Nd films (H ∼ 5.9 or 4.9 GPa and E ∼ 107.3 or 104.1 GPa) by CSM nanoindentation. [ABSTRACT FROM AUTHOR]