Search

In offshore oil and gas exploration and transportation, it is often encountered that the multi-floating structures work side by side. In some sea conditions, there is a strong coupling between the multi-floating structures that seriously affects the safety of offshore operations. Therefore, the prediction of the relative motion and force between the multi-floating structures and the wave elevation around the multi-floating-system has become a hot issue. At present, the problem of double-floating-system is mostly based on linear potential flow theory. However, when the gap width between two floating bodies is small, the viscous and nonlinear effects are not negligible, so the potential flow theory has great limitations. Based on the viscous flow theory, using the finite difference solution program of FLOW3D and using volume of fluid technology to capture the free surface, a three-dimensional numerical wave basin is established, and the numerical results of the wave are compared with the theoretical solution. On this basis, the hydrodynamic model of side-by-side double-floating-system with a narrow gap is established, and the flow field in the narrow gap of the fixed double-floating-system under the regular wave is analyzed in detail. The law of the gap-resonance is studied, which provides valuable reference for the future research on the multi-floating-system.

Given the typical characteristics of self-propulsion and jack-up wind turbine installation vessels (WTIVs), including their full and blunt hull form and complex appendages, this paper combines the model test method with the RANS-based CFD numerical prediction method to experimentally and numerically study the resistance of the optimized hull at different spudcan retraction positions. The calm water resistance components and their mechanisms of WTIVs based on T-BOW were obtained. Furthermore, using the multivariate nonlinear least squares method, an empirical formula for rapid resistance estimation based on the Holtrop method was derived, and its prediction accuracy and applicability were validated with a full-scale ship case. This study indicates that the primary resistance components of such low-speed vessels are viscous pressure resistance, followed by frictional resistance and wave-making resistance. Notably, the spudcan retraction well area, as a unique appendage of WTIVs, exhibits a significant "moonpool additional resistance" effect. Different spudcan retraction positions affect the total calm water resistance by approximately 20% to 30%. Therefore, in the resistance optimization design of WTIVs, special attention should be paid to the matching design of the spudcan structure and the hull shell plate lines in the spudcan retraction well area. [ABSTRACT FROM AUTHOR]

In this study, a vertical-axis helical-blade water turbine is innovatively proposed by drawing on the design scheme of the traditional straight-blade turbine, compared to which this blade form can effectively improve the self-starting capability and energy capture efficiency of the turbine. The study analyzes the hydrodynamic performance of the device under different parameters using CFD (computational fluid dynamics) software STAR-CCM+ and overlapping mesh technique, and the CFD simulation results are verified with published experimental work. First, the design concept of the hydraulic turbine is presented, focusing on the design of the blades and transmission mechanism to ensure the stability of the structure. Second, the effect of two-dimensional parameters on the flow field characteristics and efficiency is investigated, and then three-dimensional design parameters, such as blade helix angle and hub-to-tip ratio, are considered. The results show that a 20% increase in blade density results in a 10.74% increase in efficiency. Regarding flow velocity, a maximum output of 2.4 kW was achieved for four operating conditions (1.0, 1.5, 2.0, and 2.5 m/s). In addition, the average dynamic torque of the helical-blade turbine was 16.44% higher than that of the straight-blade turbine, indicating superior self-starting capability. It was also found that at an aspect ratio of 1.5–1.75 and a helix angle of 80°, the energy capture efficiency of the helical-blade turbine was 33.7%, which was 45.3% higher than that of the straight-blade turbine. Comparative analysis shows that the vertical-axis helical-blade turbine has favorable hydrodynamic performance, especially under low flow conditions, and the design scheme shows obvious advantages, which makes up for the defects of the traditional vertical-axis straight-blade turbine with poor self-starting ability and low efficiency, and fills up the research gaps of vertical-axis turbine design optimization, which is of certain research value. [ABSTRACT FROM AUTHOR]

Background: Children’s physical health is an important resource for a country’s future construction. However, researchers found that the physical fitness of young children around the world has declined during the two decades, from 1992 to 2012. The decline in the physique of young children has caused widespread concern around the world. Children’s main living places are families and kindergartens, so this research explores the impact of family factors on children’s body mass index (BMI) from the perspective of family attitudes, children’s sports participation, and screen time.Methods: A cross-sectional study was used to conduct a questionnaire survey of children in China. A total of 600 children were investigated, and 589 valid questionnaires were obtained. SPSS21.0 statistical analysis software was used for descriptive analysis, mean comparison, and correlation analysis of the data. AMOS 21.0 was used to construct a structural equation model and carry out path analysis.Results: (1) There are significant differences in children’s family sports attitude, sports participation, screen time, and BMI with different family structures, and parents’ education levels. (2) Family sports attitude is significantly positively correlated with parents’ education levels and children’s sports participation, and negatively correlated with children’s screen time and BMI. (3) Children’s sports participation and screen time play a chain-mediating role between family sports attitude and children’s BMI, and the role is a complete mediating role. Therefore, family sports attitudes can affect children’s physical health by affecting children’s sports participation and screen time. To promote children’s physical health, we should pay attention to the intervention of family sports attitude. (4) The mediating effects of exercise participation and screen time are similar in different family structures, so the structure of this study can be applied to different family structures.Conclusions: Children’s family sports attitude, sports participation, and screen time can affect children’s BMI. Children’s screen time and sports participation play a chain-mediating role in the influence of family sports attitudes on the path of children’s BMI. The results of this study will provide a useful reference for teachers and parents to control children’s physical health.

In order to improve the wave energy capture rate of the buoy of a wave energy generation device, this paper proposes a multi-degree of freedom method to optimize the shape of the buoy with maximum wave energy capture. Firstly, a multi-degree of freedom wave energy converter was designed, and the buoy shape was defined using a B-spline curve to generate the shape vector; then, a numerical model of the multi-degree of freedom wave energy converter was established and numerical calculations were carried out using AQWA/WEC-Sim software; on this basis, the particle swarm optimization algorithm was introduced to find the buoy shape corresponding to the maximum wave energy capture. Finally, the optimization of the buoy shape was in irregular waves. The results show that as the wave energy capture increased, the buoy shape tended to be flatter, with a smaller taper, and the optimal buoy shape had a better motion response than the conventional cone buoy. Eventually, the correctness of the buoy shape optimization method was verified through experimental testing. [ABSTRACT FROM AUTHOR]

The wave energy, as a clean and non-pollution renewable energy sources, has become a hot research topic at home and abroad and is likely to become a new industry in the future. In this article, to effectively extract and maximize the energy from ocean waves, a vertical axisymmetric wave energy converter (WEC) was presented according to investigating of the advantages and disadvantages of the current WEC. The linear and quadratic equations in frequency-domain for the reactive controlled single-point converter property under regular waves condition are proposed for an efficient power take-off (PTO). A method of damping coefficients, theoretical added mass and exciting force are calculated with the analytical method which is in use of the series expansion of eigen functions. The loads of optimal reactive and resistive, the amplitudes of corresponding oscillation, and the width ratios of energy capture are determined approximately and discussed in numerical results.

The leading group of the State-owned Enterprise Reform of the State Council of China launched a three-year Double Hundred Action for state-owned enterprises in 2018. This study empirically examines the effect of the Double Hundred Action from the perspective of innovation investment using a sample of state-owned listed enterprises from 2013 to 2020. The study finds that the Double Hundred Action significantly improves the innovation investment of state-owned listed enterprises. Furthermore, our main results are more pronounced for firms with competitive industries, a low ratio of independent directors, and auditors not belonging to the 'Big Four'. This study explores the factors influencing corporate innovation from the new perspective of the Double Hundred Action, and also enriches the study of the economic consequences of SOE reforms. This study provides empirical evidence of the positive effects of SOE reforms in emerging markets and has important policy implications for deepening the governance of SOEs. [ABSTRACT FROM AUTHOR]

An array of floating point-absorbing wave energy converters (WECs) is usually employed for extracting efficiently ocean wave energy. For deep water environment, it is more feasible and convenient to connect the absorbers array with a floating body, such as a semi-submersible bottom-moored disk, whose function is to act as the virtual seabed. In the present work, an array of identical floating symmetrically distributed cylinders in a coaxial moored disk as a wave energy device is proposed The power take-off (PTO) system in the wave energy device is assumed to be composed of a linear/nonlinear damper activated by the buoys heaving motion. Hydrodynamic analysis of the examined floating system is implemented in frequency domain. Hydrodynamic interferences between the oscillating bodies are accounted for in the corresponding coupled equations. The array layouts under the constraint of the disk, incidence wave directions, separating distance between the absorbers and the PTO damping are considered to optimize this kind of WECs. Numerical results with regular waves are presented and discussed for the axisymmetric system utilizing heave mode with these interaction factors, in terms of a specific numbers of cylinders and expected power production.

Transition metal selenides with high performance were thought to be viable electrode materials for alkali-ion batteries. By combining a simple hydrothermal technique with vacuum selenization treatment to generate FeSe2@3DGF grown on three-dimensional graphene foam backbone, a promising anode material for sodium-ion batteries was designed in this article. FeSe2@3DGF had good electrochemical properties, a large reversible capacity, and cycle stability. In particular, the FeSe2@3DGF electrode can provide a reversible capacity of 600.8 mAh g−1 for sodium-ion batteries after 300 cycles at a current density of 500 mA g−1. [ABSTRACT FROM AUTHOR]

Objective: To understand the mechanism of dual activation of the brain and heart in pistol athletes during shooting performances, through synchronized monitoring of electroencephalogram (EEG) and electrocardiogram (ECG). Methods: Eighteen adolescents air pistol athletes were placed in a simulated competition environment and performed 40 self‐paced shooting tasks, and simultaneously monitored the athletes' EEG, ECG, and shooting performance during the preparation period. Results: (1) In the successful performance, the power values of the alpha wave of the athlete's T7 area showed a significant upward trend 6 s before the shot, but there was no significant change in the alpha wave in the T8 area. In the failure performance, the alpha wave in the T7 and T8 areas did not change significantly 6 s before the shot. (2) The Fz theta wave power value of athletes in successful performance showed a significant upward trend in the 6 s before firing, and in the failure performance, it showed an "inverted U‐shaped" characteristic of rising first and then decreasing. (3) Regardless of whether it was a success or a failure, the SMR wave power value of the athlete's central area has no significant change before the shot. (4) At 6 s before the shot, the athlete's heart rate and R‐R interval (RRI) in the successful performance showed a significant decline and rise, respectively, but there was no significant change in the failure performance. (5) Approaching the firing time, the athletes' EEG and ECG have a more significant correlation in successful performance and a more synchronized trend, while the correlation was lower in failure performance. Conclusions: The psychophysiological state of young air pistol athletes was closely related to shooting performance. If the brain–cardiac system maintains a benign dual activation level during the aiming and firing period, it will be beneficial to the improvement of shooting performance, otherwise, it was easy to reduce shooting performance. [ABSTRACT FROM AUTHOR]

Cerebral vascular accident (CVA) is one of the main causes of chronic disability, and it affects the function of daily life, so it is increasingly important to actively rehabilitate patients' physical functions. The research confirmed that the nutrition supplement strategy is helpful to improve the effect of sports rehabilitation adaptation and sports performance. The patients with chronic strokes (whose strokes occur for more than 6 months) have special nutritional needs while actively carrying out rehabilitation exercises, but there are still few studies to discuss at present. Therefore, this paper will take exercise rehabilitation to promote muscle strength and improve muscle protein synthesis as the main axis and, through integrating existing scientific evidence, discuss the special needs of chronic stroke patients in rehabilitation exercise intervention and nutrition supplement one by one. At the same time, we further evaluated the physiological mechanism of nutrition intervention to promote training adaptation and compared the effects of various nutrition supplement strategies on stroke rehabilitation. Literature review pointed out that immediately supplementing protein nutrition (such as whey protein or soybean protein) after resistance exercise or endurance exercise can promote the efficiency of muscle protein synthesis and produce additive benefits, thereby improving the quality of muscle tissue. Recent animal research results show that probiotics can prevent the risk factors of neural function degradation and promote the benefits of sports rehabilitation. At the same time, natural polyphenols (such as catechin or resveratrol) or vitamins can also reduce the oxidative stress injury caused by animal stroke and promote the proliferation of neural tissue. In view of the fact that animal research results still make up the majority of issues related to the role of nutrition supplements in promoting nerve repair and protection, and the true benefits still need to be confirmed by subsequent human studies. This paper suggests that the future research direction should be the supplement of natural antioxidants, probiotics, compound nutritional supplements, and integrated human clinical research. [ABSTRACT FROM AUTHOR]

Free vibration analyses of lattice sandwich beams with general elastic supports have rarely been discussed in this field's literature. In this paper, a unified method is proposed to study the free vibration characteristics of lattice sandwich beams under various boundary conditions. The proposed method is to convert the three truss cores of lattice sandwich beams into an equivalent homogeneous layer and introduce two different types of constraint springs to simulate the general elastic support boundary at both ends of lattice sandwich beams. By changing the rigidity of the boundary restraint spring, various boundary conditions can be easily obtained without modifying the solving algorithm and solving process. In order to overcome all the discontinuities or jumps associated with the elastic boundary support conditions, the displacement function of lattice sandwich beams is usually obtained as an improved Fourier cosine series along with four sine terms. On this basis, the unknown series coefficients of the displacement function are treated as the generalized coordinates and solved using the Rayleigh–Ritz method. The correctness of the present method is verified through comparison with existing literature. The calculation results of the present method are highly accurate, indicating that the present method is suitable for analyzing the vibration characteristics of lattice sandwich beams with general elastic supports. In addition, the effects of beam length, panel thickness, core height, radius and truss inclination on the natural frequencies of lattice sandwich beams with arbitrary boundary conditions have been discussed in this paper. [ABSTRACT FROM AUTHOR]

It is rather challenging to collect ocean wave energy at high efficiency because of its ultra-low frequencies and variable amplitudes. Triboelectric Nanogenerator (TENG) technology is more suitable for harvesting low-frequency than electromagnetic power generation technology. In this work, we designed a built-in cylindrical Triboelectric Nanogenerator (C-TENG) installed inside the ocean buoy (BUOY-41). The hydrodynamic properties of the C-TENG are consistent with the ocean buoy, which are calculated by CFD software (Star-CCM+). The Energy Capture Properties of the C-TENG are established by the finite element software (COMSOL). The C-TENG has high power density (30 mW/m2) and can meet the power demand of the ocean buoy (10 mW). The implementation of the present work is of great academic value and practical significance for the development of efficient marine renewable energy conversion technology, enhancement of marine equipment energy replenishment, enrichment of hydrodynamic theories and revealing of the complex mechanisms. [ABSTRACT FROM AUTHOR]

Flexible inflatable membrane structure has the characteristics of light weight, large span, and small stiffness, and it is very sensitive to wind load. Aiming at the dynamic response of marine evacuation inflatable slides under complex and changeable wind loads at sea, the response law of the inflatable slide under different wind directions, wind speeds, and internal pressure conditions is studied by using fluid–solid coupling theory. The most dangerous conditions of evacuation system installation and the ideal internal pressure of the inflatable slide meeting the stability requirements are deduced. The LS-DYNA module is used to simulate the inflation process of the slide. The evacuation sliding is rationally simplified. By changing the inflatable internal pressure of the slide, the variation law of displacement, deformation, and sliding speed of the slide is obtained, and the optimal inflation internal pressure satisfying the evacuation efficiency requirement is obtained. The results show that the inflow wind direction angle of 30° is the most dangerous condition for slideway installation, and the internal pressure of 4000 Pa is the ideal internal pressure to meet the double standards of stability and evacuation efficiency. The numerical results obtained are valuable for analyzing wind resistance of offshore inflatable membrane structures and their practical design and application in evacuation systems. [ABSTRACT FROM AUTHOR]