Search

The Nasinuan Community Forest is publicly accessible and conserved to ensure sustainable utilization, guided by the royal initiative spearheaded by Her Royal Highness Princess Maha Chakri Sirindhorn. Previous studies have highlighted the remarkable presence of microbial and plant biodiversity in this forest, suggesting that the contained plant species may possess distinctive attributes. This study investigated the volatile organic compositions (VOCs) and antioxidant activity of concretes derived from plants within this forest. Nineteen varieties were extracted using hexane. Headspace technique of gas chromatographymass spectrometry identified various antioxidants and compounds, including 4H-Pyran-4-one, 2,3-dihydro-3,5-dihydroxy-6 in Ellipanthus tomentosus subsp. tomentosus and acetic acid in several species. Octodrine, a weight loss dietary supplement, was detected in Acacia auriculiformis and Dipterocarpus obtusifolius. Promising antioxidant capacity was observed in Pentacme siamensis, Xylia xylocarpa var. kerrii, Breynia glauca, and Peltophorum dasyrachis var. dasyrhachis, displaying moderate inhibition activity by °OH (hydroxyl radical scavenging) assay. Furthermore, Shorea obtusa and Dipterocarpus obtusifolius exhibited high inhibition activity of over 80% by DPPH (2,2-diphenyl-1-picrylhydrazyl) assay. B. glauca and Amorphophallus brevispathus exhibited the highest inhibitory activity levels >85% by ABTS (2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) assay. Notably, Naringi crenulata measured the highest activity levels by the ferric-reducing antioxidant power (FRAP) assay. This study presents the first documentation of the antioxidant abilities of concretes derived from the bark of Sindora siamensis var. maritima and Shorea obtusa. However, further research and development are required to explore the pharmaceutical and cosmetic applications of these potent plant-derived concretes with high antioxidant capacities. [ABSTRACT FROM AUTHOR]

Diarylheptanoids (DAs) characterized by a 1,7-diphenylheptane structural skeleton are considered a novel class of phytoestrogens. The DAs available in Curcuma comosa Roxb. (C. comosa) extract demonstrated significant estrogenic activities both in vitro and in vivo. This study aimed to develop and comprehensively evaluate a mucoadhesive vaginal gel for the sustained release of DAs. Different mucoadhesive polymers as gelling agents were investigated. C. comosa ethanolic crude extract was used as a source of DAs. All C. comosa gels were light brown homogeneous with pH within 4.4–4.6. Their flow behaviors were pseudoplastic with a flow behavior index of 0.18–0.38. The viscosity at a low shear rate varied from 6.2 to 335.4 Pa·s. Their mechanical and extrudability properties were associated well with rheological properties. Polycarbophil (PCP):hydroxypropyl methylcellulose (HPMC) blends had a higher mucoadhesiveness to porcine vaginal mucosa than those of PCP-based or HPMC-based gels. All C. comosa gels exhibited a sustained, zero-order DA release pattern over 72 h. Korsmeyer and Peppas equation fitting indicated a non-Fickian, case II transport release mechanism. C. comosa gels had good physical and chemical stability under low-temperature storage for up to 12 months. PCP:HPMC-based mucoadhesive gels could be a proper delivery system for vaginal administration of DAs. [ABSTRACT FROM AUTHOR]

This study demonstrated the implementation of a liquisolid technique to formulate directly compressible orally disintegrating tablets (ODTs). Cannabidiol (CBD), a hydrophobic cannabinoid, was prepared as a liquisolid powder using microcrystalline cellulose–colloidal silicon dioxide as a carrier–coating material. Different liquid vehicles differing in their volatility, hydrophilicity, and viscosity were investigated. Each of the CBD–ODTs comprised CBD liquisolid powder (10 mg CBD), superdisintegrant, flavors, lubricant, and filler. The physical mixture (PM) ODT was prepared as a control. Ethanol-based ODTs (CBD–EtOH–ODTs) had comparable tablet properties and stability to CBD–PM–ODTs. ODTs with nonvolatile-vehicle-based liquisolid powder had lower friability but longer disintegration times as compared with CBD–PM–ODTs and CBD–EtOH–ODTs. Compression pressure influenced the thickness, hardness, friability, and disintegration of the ODTs. With a suitable compression pressure to yield 31-N-hardness-ODTs and superdisintegrant (4–8%), CBD–ODTs passed the friability test and promptly disintegrated (≤25 s). Times to dissolve 50% of CBD–PM–ODTs, CBD–EtOH–ODTs, and nonvolatile-vehicle-based CBD–ODTs were 10.1 ± 0.7, 3.8 ± 0.2, and 4.2 ± 0.4–5.0 ± 0.1 min, respectively. CBD–EtOH–ODTs exhibited the highest dissolution efficiency of 93.5 ± 2.6%. Long-term and accelerated storage indicated excellent stability in terms of tablet properties and dissolution. Nonvolatile-vehicle-based CBD–ODTs exhibited a higher percentage of remaining CBD. This study provides useful basic information for the development of ODT formulations using a liquisolid technique application. [ABSTRACT FROM AUTHOR]

This work investigated the influence of liquid vehicles on the release, mucosal permeation and deposition of cannabidiol (CBD) from liquisolid systems. Various vehicles, including EtOH, nonvolatile low- and semi-polar solvents, and liquid surfactants, were investigated. The CBD solution was converted into free-flowing powder using carrier (microcrystalline cellulose) and coating materials (colloidal silica). A physical mixture of the CBD and carrier–coating materials was prepared as a control. The non-crystalline state of CBD in the liquisolid systems was confirmed using XRD, FTIR and SEM studies. The CBD liquisolid powder prepared with volatile and nonvolatile solvents had a better CBD release performance than the CBD formed as the surfactant-based and control powders. The liquisolid systems provided the CBD permeation flux through porcine esophageal mucosa ranging from 0.68 ± 0.11 to 13.68 ± 0.74 µg·cm−2·h−1, with the CBD deposition levels of 0.74 ± 0.04 to 2.62 ± 0.30 μg/mg for the dry mucosa. Diethylene glycol monoethyl ether showed significant CBD permeation enhancement (2.1 folds) without an increase in mucosal deposition, while the surfactants retarded the permeation (6.7–9.0 folds) and deposition (1.5–3.2 folds) significantly. In conclusion, besides the drug release, liquid vehicles significantly influence mucosal permeation and deposition, either enhanced or suppressed, in liquisolid systems. Special attention must be paid to the selection and screening of suitable liquid vehicles for liquisolid systems designed for transmucosal applications. [ABSTRACT FROM AUTHOR]

In this study, the mucosal permeation and deposition of cannabidiol (CBD) with neat and binary vehicles were investigated. Permeation experiments were performed using static diffusion cells coupled with fresh porcine esophageal mucosa. The CBD–vehicle solutions were applied at a fixed dose (~5 mg/cm2), and the corresponding permeation parameters were calculated. In neat vehicles, the permeation flux (Jss) ranged from 0.89 ± 0.15 to 179.81 ± 23.46 µg·cm−2·h−1, while the CBD deposition ranged from 11.5 ± 1.8 to 538.3 ± 105.3 μg·cm−2. Propylene glycol (PG) and diethylene glycol monoethyl ether (DEGEE) yielded the highest permeability (Ps) and CBD deposition, while medium-chain triglycerides (MCT) yielded the lowest Ps and deposition. This was due to the difference in apparent partition coefficient (K), which is related to the solubility of CBD in the vehicle. The PG:DEGEE binary vehicle boosted Jss (1.5–1.6 fold) and deposition (2.0–2.7 folds) significantly, compared to neat DEGEE. The combination of DEGEE with MCT dramatically enhanced Jss (11–44 fold) and deposition (1.6–4.7 fold). The addition of lipophilic enhancers, laurocapram, and oleic acid, to PG:DEGEE and DEGEE:MCT vehicles significantly reduced Jss (0.3–0.7 fold) and deposition (0.4–0.8 fold) while nerolidol had no effect. These permeation reductions were found to be related to modification of the K and/or diffusivity values. This study provides useful basic information for the development of CBD formulations intended for transmucosal delivery. [ABSTRACT FROM AUTHOR]

In this study, permeation behaviors and chemical stability of miroestrol and deoxymiroestrol from Pueraria candollei var. mirifica (PM), Thai traditional medicine, crude extract containing transdermal gels were firstly evaluated. Three different PM extract containing gels were formulated, including hydroalcoholic and microemulsion gels using carbomer, and silicone gel using silicone elastomer. In vitro permeation through porcine ear skin demonstrated that the flux and 24 h cumulative permeation of miroestrol and deoxymiroestrol were in the order of hydroalcoholic > silicone > microemulsion gels. Hydroalcoholic gel provided the highest partition coefficient from gel onto skin, and thus the skin permeability coefficient. After 24 h permeation, no miroestrol and deoxymiroestrol remained deposited in the skin. Accelerated study using heating-cooling revealed insignificant difference between the remaining percentages of miroestrol and deoxymiroestrol in aqueous and non-aqueous based gels. Long-term stability study showed that miroestrol contents remained constant for 90 d and 30 d under 5 ± 3 °C and 30 ± 2 °C, 75 ± 5%RH, respectively; whereas the percentage of deoxymiroestrol decreased significantly after 30 d storage, irrespective of storage conditions. Acute dermal irritation test on New Zealand White rabbits showed that PM hydroalcoholic gels were non-irritant, with no signs of erythema or oedema. [ABSTRACT FROM AUTHOR]

Graphical abstract Abstract Curcuma comosa (C. comosa) is a Thai medicinal herb that provides numerous pharmacologic activities due to its estrogen-like action. This study aimed to investigate the use of liquisolid technique to prepare tablets containing oleoresin-like crude extract of C. comosa, and to improve the dissolution profiles of its major compounds, diarylheptanoids (DAs). Free flowing powders of C. comosa extract were obtained by adsorption onto solid carriers, microcrystalline cellulose, with colloidal silica as coating material. FTIR results ruled out possible interactions between C. comosa extract and excipients. The results indicated that all of liquisolid tablets met the USP requirements. The release of DAs were significantly increased through liquisolid formulations, compared to crude extract. By decreasing the ratio of carrier to coating from 20 to 10, an improvement in dissolution rate was observed. Addition of additives - namely polymer (polyvinyl pyrrolidone) and/or nonvolatile liquid (propylene glycol) affected tablet properties which involved longer disintegration time and lower DA dissolution. Optimized C. comosa liquisolid formulation was prepared in a carrier to coating ratio of 10 without additives. Stability studies showed that physical properties of liquisolid tablet were not affected by aging, but percent remaining and dissolution profiles of DAs were influenced by storage temperature. In vivo pharmacokinetic behavior of the optimized C. comosa liquisolid tablets was investigated following a single oral administration to rabbits. The results proved that the method used for preparation of liquisolid led to C. comosa tablets with low variation in content uniformity and tablet properties, as well as enhanced dissolution behavior. [ABSTRACT FROM AUTHOR]

Rational: Phytoestrogens have been found to delay signs of skin aging in post-menopausal women, in a way similar to the effects of estrogens. Diarylheptanoids from a rhizome of traditional Thai herb named Curcuma comosa is considered to be a novel class of phytoestrogens. Objectives: The aims of this study were to prepare effective topical films using mixed types and vary ratios of hydrophobic (Eudragit RL, Eudragit RS, and Eudragit NE) and hydrophilic polymer (hydroxylpropyl methycellulose, HPMC) with Transcutol as a permeation enhancer for delivery of diarylheptanoids to improve signs of skin aging in post-menopausal women. Material and methods: Topical films were characterized for their physical and mechanical properties. In vitro release, skin permeation and accumulation were evaluated using Franz diffusion cell and the concentrations of diarylheptanoids were determined using high-performance liquid chromatography. Results: The combined formulations between HPMC and Eudragit NE showed the satisfactory physical and mechanical properties, and also provided the highest amount of drug released compared to Eudragit RL and Eudragit RS. When the proportion of HPMC amount in the polymer matrix increased, the cumulative drug release also increased (HPMC: Eudragit NE 6:4>5:5>4:6). Moreover, they provided a high accumulation of diarylheptanoids within skin when using transcutol as a permeation enhancer. Conclusion: The obtained data provided the skin permeation and accumulation behavior of diarylheptanoids, indicating the feasibility of a skin delivery of the C. comosa extract. The developed films might be topically used as an alternative therapy for protection of skin aging in peri and post-menopausal women. [ABSTRACT FROM AUTHOR]

The objective of this study was to apply fractional factorial and multi-response optimization designs using desirability function approach for developing topical microemulsions. Minoxidil (MX) was used as a model drug. Limonene was used as an oil phase. Based on solubility, Tween 20 and caprylocaproyl polyoxyl-8 glycerides were selected as surfactants, propylene glycol and ethanol were selected as co-solvent in aqueous phase. Experiments were performed according to a two-level fractional factorial design to evaluate the effects of independent variables: Tween 20 concentration in surfactant system (X1), surfactant concentration (X2), ethanol concentration in co-solvent system (X3), limonene concentration (X4) on MX solubility (Y1), permeation flux (Y2), lag time (Y3), deposition (Y4) of MX microemulsions. It was found thatY1increased with increasingX3and decreasingX2,X4; whereasY2increased with decreasingX1,X2and increasingX3. WhileY3was not affected by these variables,Y4increased with decreasingX1,X2. Three regression equations were obtained and calculated for predicted values of responsesY1,Y2andY4. The predicted values matched experimental values reasonably well with high determination coefficient. By using optimal desirability function, optimized microemulsion demonstrating the highest MX solubility, permeation flux and skin deposition was confirmed as low level ofX1,X2andX4but high level ofX3. [ABSTRACT FROM AUTHOR]

The objective of this study was to investigate the effects of propylene glycol (PG), ethanol (EtOH) and sodium lauryl sulfate (SLS) on thein vitrodeposition and permeation of finasteride (FNS). A side-by-side diffusion cell mounted with a pig ear skin and a saturated solution of FNS in PG (10, 20% v/v), EtOH (10, 20% v/v) or SLS (0.5, 1% w/v) vehicles were used. Incorporation of PG, EtOH or SLS caused a significant increase in FNS solubility both in the solution and on the skin with SLS > EtOH > PG. The results obtained from skin deposition studies showed that the FNS deposition rate and time increased in the same order as that of the solubility. The deposition kinetics of FNS solubilized in PG, EtOH and SLS vehicles followed either zero-order, square-root-of-time or pseudo-first-order kinetic models depending on the type and concentration of the enhancer. The permeation studies demonstrated that FNS permeation fluxes were enhanced only by EtOH vehicles. These results suggest that PG and SLS could be used as deposition enhancers, while EtOH could be the effective permeation enhancer of FNS. The obtained results can be used as the considerable insights for formulating the topical and transdermal products of FNS. [ABSTRACT FROM AUTHOR]

[Display omitted] • Application of liquisolid technique significantly enhanced cannabinoid dissolution. • Different liquid vehicles affected hardness and disintegration to different extents. • Liquid vehicles demonstrated different effects on cannabinoid dissolutions. • Liquid vehicles had no effect on percent cannabinoid remaining of 90-d-old compacts. This work describes the application of liquisolid technique to enhance cannabinoid dissolution from Cannabis sativa L. (CS) compacts. Effects of five vehicles, namely, volatile (ethanol) and nonvolatile (caprylocaproyl macrogolglycerides, polyethylene glycol 400, oleoyl macrogolglycerides and polysorbate 20) liquids, on tablet properties, dissolution and stability were investigated. The viscid oleoresin CS extract was mixed with vehicles before being transformed into free-flowing powder by the use of microcrystalline cellulose and colloidal silica as carrier and coating materials. Liquid vehicles had a nonsignificant effect on liquid load factor of CS extract. CS liquisolid compacts had acceptable tableting properties in terms of weight variation, friability, hardness, content uniformity and disintegration time. Different vehicles affected the hardness, disintegration, and wettability of CS compacts and thus the dissolution behaviors of cannabinoids to different extents. Dissolutions of cannabinoids from CS compacts were rate-limited by the disintegration process. Liquisolid formulations using nonvolatile liquids with low polarity or high hydrophilic-lipophilic balance yielded more than 90% cannabinoid dissolution. Stability studies revealed nonsignificant changes in tablet characteristics, cannabinoid content and dissolutions of CS compacts when stored at 5 ± 3 °C for 3 months. This work presents a general concept of how to successfully formulate CS extract with cannabinoid dissolution enhancement characteristics. [ABSTRACT FROM AUTHOR]